Asymmetric Wall Mount Indirect LED Fino Features Fino is a stunningly thin, indirect LED lighting solution. At only 5/8 deep and either 6W/ft or 2W/ft, it is designed to promote a crisp, comfortable work environment. Fino runs seamlessly across the walls without the need to cut wall studs, leaving ceilings pristine clean creating a beautiful visual impression. Fino wall mount is available for mud-in trimless gypsum board installations or eposed flanged for 5/8" gypsum board or millwork. Product Overview Type: Asymmetric, Semi-Recessed Wall Mount, Indirect Wattage: 6W/ft, 2W/ft (other wattages consult factory) Lumen Output: 2,32 ma; 82.6 Lm/W (6W, 4ft fiture) Color Temp: 27K, 3K, 35K, 4K CRI: 83 typ. (27K, 3K, 35K, 4K) Dimming: -V, % dimming (standard) Lutron Hi-lume 2 wire (2V only) Lutron Hi-lume EcoSystem, % dim, fade to off Lutron Hi-lume 5 Series DALI dimming,.% dim *International version available, see website for spec sheet. Fiture Summary (see following pages for more information) Performance Chart Wattage Per Foot Delivered Lumens LPW Color Temp 6 232 82.6 35K-83 2 3752 78.2 35K-83 Data is based on 35K-83 IES files available on website Data is based on fiture with performance lens Fino Flanged Runs Individual Runs: ' - (to nearest 6") Continuous Runs: Available (to nearest 6") 5 Electrical Data Wattage Per Foot 6 System Watts Amps System Watts Amps 2V 23.8.2 47.39 277V 25.6.9 47.5.7 2V 5.4.82 2 277V 5.3.8.6.36 Electronic multi-volt (2V-277V), constant current LED driver LIT-26 /26/8 Page of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
Ordering Information FINO-A6 HW 2/277 2 3 4 5 6 7 8 9 2 3 4 Model FINO-A6 (gyp board, trimless mud-in) FINO-REMOTE-A6 (gyp board, trimless mud-in, remote driver) FINO-FLG-A6 (eposed flange) FINO-FLG-REMOTE-A6 (eposed flange, remote driver) Optics PL - performance lens (standard) DL - designer lens Wattage (per foot) 6 2 Consult factory for other wattage options Color Temp 83 CRI: 27-27K-83 3-3K-83 35-35K-83 4-4K-83 92 CRI optional, consult factory 7 8 9 Length - specify length (for individual fiture, 8" to in 6" increments) (for continuous run, specify to nearest 6") Configuration IND - individual fiture, 8" to in 6" increments CON - continuous run > than, specify to nearest 6" s -V - % electronic dimming, multi-volt (2V-277V) constant current driver (standard) Consult Factory for the following options: HILUME-A-LTE - Lutron "A" Series, % dim, 2-wire, 2V only HILUME-H-ECO - Lutron "H" Series, % dim, fade to off, EcoSystem HILUME-5-ECO - Lutron "5" Series, EcoSystem DALI - DALI Dimming 2V-277V,.% dim 5 Finish For Mud-in version: HW - high reflectance matte white For Flange Version: HW - high reflectance matte white BT* - black teture for eposed flange only ST* - silver teture for eposed flange only * Reflector is always painted HW (high reflectance white). 6 Voltage 2/277 - Lengths less than may have restrictions based upon wattage, lengths, drivers or other options. The "A" refers to the sequential revision in a year and "XX" refers to the year of update. Updates coincide with improved performance while not changing the overall fiture aesthetic and are reflected in the published performance data. Please contact your Amerlu representative for eplanations of changes. LIT-26 /26/8 Page 2 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
Specifications Application Fino Wall mount throws light across the ceiling filling the room with indirect bounce light. Can be mounted to wash floor as well. Indirect lighting for washing ceiling or floor, brightens surfaces in otherwise difficult applications. Construction Two piece assembly: ) Etruded aluminum mud-in or eposed no spackle frame and sheet metal die-formed gear tray. 2) Snap-in Reflector etruded aluminum optical assembly. Positive latching system for hairline seams. Optical All lenses are snap-in, etruded acrylic. Amerlu's proprietary acrylic lens provides ecellent transmission while effectively concealing source image. PL - Performance Lens is a high efficiency asymmetric throw lens. DL - Designer Lens provides more even light with minimal striations. LED Amerlu's boards and patented connector design with brand name LEDs enables Amerlu fitures to have ecellent thermal management and offer a 5 year warranty. Our LED binning is within 3 MacAdam ellipse. Boards are configured for maimum fleibility resulting in even illumination no matter the fiture layout. LED boards are easily replaced in the field with just a Phillips screw driver. Color Temperature Options: 27K, 3K, 35K, 4K CRI: 83 typical, 92 optional - consult factory R9: 6 @ CRI 83 R9: >5 @ CRI 92 Life: 5,+ hr., > 7% of initial lumens (L7) Electrical Wattage: 6W/ft, 2W/ft (consult factory for other wattages). Wiring (see page 6 for wiring illustrations): Integral uses Standard enclosure (on the back of fiture). It is adjusted for installation in between 6" o.c. or greater wall studs. or 2 drivers per fiture required based upon Wattage and Length (see table pg 4). voltage Power Feed (by others) must be brought to each enclosure. Fitures with multiple drivers are not connected internally. REMOTE (optional) requires a remote driver with enclosure. or 2 drivers per fiture are required based upon Wattage and Length. Note: () per enclosure. Fitures are provided with low voltage plenum rated 8/2 cable for field connection (by others) to Remote. Remote can be mounted anywhere within 5'. Short Runs: multiple short fiture lengths can be wired (daisy chained) to a single Remote. Cumulative Fiture lengths must equal the MIN Length per criteria and be dividable by 6". (see Table 2 page X). We suggest limiting number of short runs to 3 per remote driver. Consult factory for additional remote driver requirements not shown Emergency circuit via remote inverter or auiliary emergency power supply (by others). This product complies with IEEE C62.4 for surge endurance up to 2.5KV. Amerlu recommends using additional surge protection with this unit (supplied by others), surge and over voltage damage is not covered under warranty. s -V - % electronic dimming, multi-volt (2V-277V) constant current driver (standard). Cap leads for non-dim applications. Optional s: HILUME-A-LTE - Lutron "A" Series, % dim, 2-wire, 2V only HILUME-H-ECO - Lutron "H" Series, % dim, fade to off, EcoSystem HILUME-5-ECO - Lutron "5" Series, EcoSystem DALI - DALI Dimming 2V-277V,.% dim Note: is accessible by removing snap-in reflector assembly. Finish Powder coat paint, baked on finish for maimum durability and color stability. HW - High reflectance matte white. BT - Teture (frame) ST - Silver Teture (frame) Please note: Reflector will be painted HW (high reflectance white, for predictable performance. Eposed flange frame may be painted BT or ST). Configurations/Lengths Straight lengths only. IND - Individual fitures are made of single standard lengths of 8" to (in 6" increments). These are stand alone fitures. Lengths less than may have restrictions based upon wattage, lengths, drivers or other options. CON - Continuous runs, > than, specified to nearest 6" increments. Each Housing/mud-in frame has factory installed alignment pins. Mating frames are easily aligned and joined with "catch and latch" mechanisms. Mounting FINO-A6 - Gypsum board mud-in only. FINO-REMOTE-A6 - Gypsum board mud-in with remote driver enclosure. FINO-FLG-A6 - Eposed flanged for gypsum board or millwork. FINO-FLG-REMOTE-A6 - Eposed flanged for gypsum board or millwork with remote driver enclosure. Certifications Approved to UL standards for damp locations as tested by CSA. Intended for indoor use only IC rated Warranty Amerlu's 5 year limited warranty. Please consult Amerlu website for details. LIT-26 /26/8 Page 3 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
FINO-A6 Enclosure Visible after installation Wall Field adjustable driver enclosure fits between 8" studs 3 5 /8" Cut Out Dimension Reflector 2 3 /6" Lens 5 /6" Mud-in Screen 2" Space required behind 5/8" gyp board 5/8" /2" Fiture Length Cut Out Dimensions: IND: 3 5 /8" fiture length + /6" CON: 3 5 /8" fiture length + " FINO-REMOTE-A6 (FINO with REMOTE DRIVER) Enclosure AC Power Visible after installation Note: Remote driver can be installed up to 5' ma. from fiture. Field adjustable splice bo Wall Splice Bo 3 5 /8" Cut Out Dimension Reflector 2 3 /6" Lens 5 /6" Mud-in Screen /8" Space required behind 5/8" gyp board 5/8" /2" Fiture Length Cut Out Dimensions: IND: 3 5 /8" fiture length + /6" CON: 3 5 /8" fiture length + " Mount in wall any orientation Uplight LED Module Downlight LIT-26 /26/8 Page 4 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
FINO-FLG-A6 (FINO FLANGE) Field adjustable driver enclosure fits between 8" studs Enclosure 3/8" 3 5 /8" Cut Out Dimension Reflector 2 3 /6" Lens 4 3 /8" 3/8" 2" Space required behind 5/8" gyp board /2" Fiture Length 5/8" Cut Out Dimensions: IND: 3 5 /8" fiture length + 3 /6" CON: 3 5 /8" fiture length + 3 /8" FINO-FLG-REMOTE-A6 (FINO FLANGE with REMOTE DRIVER) Note: Remote driver can be installed up to 5' ma. from fiture. Enclosure AC Power 3/8" Field adjustable splice bo Splice Bo 3 5 /8" Cut Out Dimension Reflector 2 3 /6" Lens 4 3 /8" 3/8" /8" Space required behind 5/8" gyp board /2" Fiture Length 5/8" Cut Out Dimensions: IND: 3 5 /8" fiture length + 3 /6" CON: 3 5 /8" fiture length + 3 /8" LIT-26 /26/8 Page 5 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
Integral (for every fiture section) located on the back of fiture is field adjusted for installation in between wall studs. or 2 drivers per fiture required (see table ). voltage Power Feed (by others) must be brought to each enclosure. Table Ma. W/ft Min. Length 2 -V 6W 2W Lutron 6W 2W DALI 6W 2W '-6" '-6" 2'-6" '-6" '-6" '-6" AC Standard Individual Wiring AC Power Feed (by others) Standard bo up to (2W/ft) up to (6W/ft) Power Feed (by others) Standard bo -6" - (2W/ft) AC Remote (for every fiture section, optional) requires an enclosure. 2 drivers per fiture may be required see Table 2. Note: () per enclosure. Fitures are provided with low voltage plenum rated 8/2 cable for field connection (by others). Remote driver ma distances are listed on Table 2. Table 2 Ma. Ma. Remote W/ft Min. Length 2 Distance -V 6W 2W Lutron 6W 2W DALI 6W 2W '-6" '-6" 2'-6" '-6" '-6" '-6" 5' 5' 5' 5' 5' 5' Remote Enclosure Dimensions: 5 /4" 2 /2" 2 /4" Remote Individual Wiring Low voltage plenum cable (supplied) Power Feed Remote AC (by others) up to (2W/ft) up to (6W/ft) Remote Remote -6" - (2W/ft) AC AC Power Feed (by others) Short Runs (on one remote driver): multiple short fiture lengths can be wired (daisy chained) to a single Remote. Cumulative fiture lengths must equal the MIN length per criteria and be divisable by 6". (see Table 3 ) W/ft Min. Length # of s 6" Section 2" Section -V 6W 2W Lutron 6W 2W DALI 6W 2W '-6" '-6" 2'-6" '-6" '-6" 2'-6" '-6" '-6" Note: Consult factory for additional remote driver requirements not show. 3 3 3 2 2 Table 3 Short Run Remote Unit Wiring Remote Enclosure Low voltage plenum cable (supplied) Dimensions: Custom low voltage Amerlu junction bo (supplied) 5 /4" 2 /2" 2 /4" AC Power Feed (by others) Remote 2" 2" 2" LIT-26 /26/8 Page 6 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
FIXTURE DATA: (Complete photometric data (.ies format) available upon request) MULTIPLYING FACTORS: (Multiplying Factor is based on 35K-83 2V IES file on website) Wattage: 6W 2W CCT: 27K-83 3K-83 35K-83 4K-83 Factor:..76 Factor:.87.93..8 FINO PERFORMANCE LENS 6W 35K-83 4FT Total Watts: 26 Total Lumens: 2,32 (533 Lm/ft) Source: 2 White LED's LTL# 34464 8 5 FINO DESIGNER LENS 6W 35K-83 4FT Total Watts: 26 Total Lumens:,769 (442 Lm/ft) Source: 2 White LED's LTL# 34463 8 5 2 2 9 9 4 35 6 6 8 ACROSS 45 ALONG 7 ACROSS 45 ALONG 3 3 ZONAL LUMEN SUMMARY Zone Lumens %Fit -3 2. -4 9.44-6 56 2.63-9 255.97 4-9 246.52 6-9 99 9.34 9-8 877 88.3-8 232. Efficacy = 82.6 Lumens /Watt COEFFICIENTS OF UTILIZATION Effective Floor Cavity Reflectance 2% RC 8 RW 7 5 3 RCR.98.98.98.98.87.83.78.74 2.79.7.64.59 3.7.62.54.48 4.65.54.46.4 5.59.47.4.34 6.54.42.34.29 7.5.38.3.24 8.46.34.26.2 9.42.3.23.8.39.28.2.6 ZONAL LUMEN SUMMARY Zone Lumens %Fit -3 2.2-4 8.47-6 49 2.76-9 237 3.42 4-9 229 2.95 6-9 89.66 9-8 532 86.58-8 769. Efficacy = 68.6 Lumens /Watt COEFFICIENTS OF UTILIZATION Effective Floor Cavity Reflectance 2% RC 8 RW 7 5 3 RCR.98.98.98.98.87.82.78.74 2.79.7.64.58 3.7.6.54.48 4.65.54.46.4 5.59.47.39.33 6.54.42.34.28 7.5.37.3.24 8.46.34.26.2 9.42.3.23.8.39.28.2.6 LIT-26 /26/8 Page 7 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
DIMMING COMPATIBILITY: Amerlu Fino fitures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlu recommends testing your unique dimming configuration as the eact full configuration (Dimmer, Fiture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BELOW IS FOR WIRED DIMMERS ONLY. FOR WIRELESS DIMMERS, CONSULT FACTORY --- -V - DIMMING (Standard) Integrates into a variety of building management and daylighting controls -V Wiring Diagram 2V or 277V* Dims down to % light output Requires interface to turn off power to driver Consult Dimming manufacturer for installation instructions - DO NOT SHARE NEUTRALS! Compatible Dimmers : Wall Bo Lutron: Wattstopper: Leviton: Diva - DVSTV ADF-2277 Renoir II Maestro - MS-Z Nova-T - NTSTV-DV Center System Lutron Grafik Eye with GRX-TV Interface -V Dimming Control Gray Purple White Green -V (-) -V (+) Switched Hot V+ V- Red LUTRON HI-LUME DIMMING Integrates into Lutron EcoSystem building management 2V or 277V* Dims down to less than 5% light output EcoSystem Control Consult Dimming manufacturer for installation instructions - DO NOT SHARE NEUTRALS! Compatible Dimmers : Wall Bo Lutron: Diva Maestro Nova-T Vareo HILUME-H-ECO, HILUME-5-ECO EcoSystem Digital Control Wiring Diagram E2 E ECOSYS Bus EcoSystem Dimming Purple Stripe E Control Purple E2 (Cap off Orange wire) Orange Dimmed Hot White Green Switched Hot V+ V- Red Center System Lutron EcoSystem compatible controls * is 277V dimmable with appropriate dimmer (by others). All provided wiring diagrams show 2V wiring colors and method. Please refer to 277V dimmer installation instructions for 277V wiring diagrams. The absence of a dimmer from the lists above does not imply incompatibility. Please consult factory for compatibility inquiries. LIT-26 /26/8 Page 8 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com
DIMMING COMPATIBILITY: Amerlu Fino fitures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlu recommends testing your unique dimming configuration as the eact full configuration (Dimmer, Fiture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BELOW IS FOR WIRED DIMMERS ONLY. FOR WIRELESS DIMMERS, CONSULT FACTORY --- LUTRON HILUME-A-LTE DIMMING Utilizes Standard incandescent dimmers that are in wide use in installations across the US. Best for retrofit applications where TRIAC dimmers are installed. 2V only Dims down to less than % light output (most cases) Consult Dimming manufacturer for installation instructions - DO NOT SHARE NEUTRALS! Must meet dimmer Minimum Load Requirements per dimming manufacturer Compatible Dimmers : Wall Bo (Incandescent Style, Wattage as required) Lutron: Diva Maestro Nova-T Vareo Skylark Center System Lutron "GP" Panel Lutron Grafik Eye QS Lutron HILUME-A-LTE Wiring Diagram TRIAC Dimming Control White Green V+ V- Red DALI - DALI DIMMING 2V-277V Digital control protocol allows individual fiture control DALI Wiring Diagram 2V - 277V* Dims down to.% light output in most cases DALI Dimming Control Purple Purple/WT DALI Bus V+ Red Compatible Dimmers : Wall Bo Leviton CD25 Controller White Green V- Center System Dynalite Fifth Light * is 277V dimmable with appropriate dimmer (by others). All provided wiring diagrams show 2V wiring colors and method. Please refer to 277V dimmer installation instructions for 277V wiring diagrams. The absence of a dimmer from the lists above does not imply incompatibility. Please consult factory for compatibility inquiries. LIT-26 /26/8 Page 9 of 9 Amerlu, LLC 78 Bauer Drive, Oakland, NJ 7436 P: 973-882-5 F: 973-882-265 amerlu.com