Specifications 08/15/2016

Specifications 08/15/2016 ITEM 1 BARISTA COUNTER (1 REQ'D) General Contractor Model CUSTOM Coordinate design, cut outs etc. with Kitchen/Bar design. Project Source Hotel Whitaker Restaurant 08/15/2016 From Studio DnD LLC Jeff Katz 11471 Jersey Lane Thornton, CO 80233 (303)484 1269 ITEM 2 INTEGRAL HAND LAV WITH SIDE SPLASH (1 REQ'D) Integral/undermount hand lav. Review millwork details. ITEM 2.1 PANTRY FAUCET (2 REQ'D) Fisher Model 3116 Faucet, deck mounted dual control, 12" rigid gooseneck spout, 1/2" inlet INLET OUTLET ITEM 5 GARBAGE CAN (1 REQ'D) Rubbermaid Model FG354000BLA Dimensions: 30(h) x 20(w) x 11(d) Slim Jim Waste Container, 23 gallon, 20"W x 11"D x 30"H, general purpose waste, open type without lid, high impact plastic construction, black ITEM 6 KNOCK BOX (1 REQ'D) ESPRESSO SUPPLY Model 25102 Rattleware 25102: 6 in x 5 1/2 x 4 in knock box. Welded metal bar with rubber cover & molded rubber edge gasket. Open bottom chute for undercounter ground disposal. Page 1 of 20

ITEM 7 PITCHER RINSER (1 REQ'D) ESPRESSO SUPPLY Model 32507 6 in x 6 in x 2 in Pitcher Rinser, Built in water & drain connections, 3/8 in inlet (John Guest fitting), 1/2 in barb drain fitting ITEM 8 ESPRESSO GRINDER (1 REQ'D) Vendor Model ESPRESSO GRINDER TBD ITEM 9 INTEGRAL/UNDERMOUNT ICE BIN (1 REQ'D) 18 x 21 Ice bin with drain. Verify with counter detail. ITEM 10 ESPRESSO MACHINE (1 REQ'D) Vendor Model ESPRESSO Verify with Vendor ITEM 13 REACH IN UNDERCOUNTER REFRIGERATOR (1 REQ'D) True Food Service Equipment Model TUC 60 ADA Dimensions: 29.75(h) x 60.38(w) x 30.13(d) ADA Compliant Undercounter Refrigerator, 33 38 F, stainless steel top & sides, (2) stainless steel doors, (4) shelves, aluminum interior with stainless steel floor, 3" castors, front breathing, 1/5 HP, 115v/60/1, 5.1 amps, 7' cord, NEMA 5 15P, 34" working height, culus, NSF, CE, MADE IN USA 1 ea Self contained refrigeration standard 1 ea Warranty 5 year compressor (self contained only), please visit www.truemfg.com for specifics 1 ea Warranty 3 year parts and labor, please visit www.truemfg.com for specifics 1 ea Alternative hinging available, please contact factory 1 ea 3" castors, standard VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & 1 115 60 1 5 15P 5.1 1/5 15.0 Plug Page 2 of 20

ITEM 14 COFFEE BREWING EQUIPMENT (1 REQ'D) Vendor Model COFFEE BREWING EQUIPMENT Verify with Vendor ITEM 15 BEVERAGE EQUIPMENT (1 REQ'D) Vendor Model CUSTOM Hot Water Unit ITEM 16 DUMP SINK (1 REQ'D) Integral/undermount dump sink. Review millwork details. ITEM 20 VENTLESS CONV OVEN (1 REQ'D) Turbochef Model DOUBLE BATCH See Specs. Counter model, two deck ventless convection oven. ITEM 21 HEATED SHELF FOOD WARMER (1 REQ'D) Alto Shaam Model HFM 72 Dimensions: 5.44(h) x 72.75(w) x 24.75(d) Hot Food Module, built in, 72 3/4" W x 24 3/4" D x 5 7/16", Halo Heat base, thermostat control is attached to unit; with a 30" (762mm) flexible water tight extension, on/off switch, recessed stainless steel top built to accept customer supplied solid surface material (70 3/8" x 22 3/8" x 3/4"), stainless steel, EcoSmart, culus, UL EPH, ANSI/NSF4, CE 1 ea 208v/60/1 ph, 9.7 amps, 1.99 kw, NEMA 6 15P, standard VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & 1 208 60 1 6 15P 9.7 1.99 Plug ITEM 21A HEATED SHELF FOOD WARMER <ALTERNATE> (2 REQ'D) Rotisol USA Model MGC1500 R H Dimensions: 8.3(h) x 54.4(w) x 34.6(d) Modular Heated Countertop Display with Granite Top, 54 3/8" L, 2 independent heated zones, thermostatically controlled, digital display, stainless steel outer construction, adjustable feet, 208 240v/60/3 ph, 12 amps, 78" cord, ETL 2 ea <Alternate> Model STD WARRANTY Standard Warranty, one year parts & labor 2 ea <Alternate> Model GRANITE ABS BLK Absolute Black Granite Page 3 of 20

VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 208 240 60 3 12.0 ITEM 22 SNEEZE GUARD (1 REQ'D) Tempered Glass sneeze guard at pastry/food display counter, per details. ITEM 25 POS SYSTEM (2 REQ'D) Owner Provided Model POS SYSTEM POS system Verify wiring. ITEM 30 BOTTLE DISPLAY (3 REQ'D) Nationwide Fabrication Inc. Model LDB 18 Dimensions: 37(h) x 18(w) x 24(d) Underbar Liquor Bottle Display Unit, free standing, 18"W x 24"D (aligns with 24" deep units without speed rail), (4) steps, extra wide rear step, includes clear lift off liquor identification cover, stainless steel construction, stainless steel legs & adjustable bullet feet, ETL 3 ea 1 year parts & labor warranty ITEM 31 ICE BIN (3 REQ'D) Nationwide Fabrication Inc. Model IBB 12 Dimensions: 37(h) x 12(w) x 24(d) Underbar Ice Bin, 12"W x 24"D, 42 lbs. ice capacity, 7"H backsplash, 10 1/2" deep bin liner, ABS plastic breaker strip around ice bin liner, includes sliding stainless steel bin cover, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL INLET OUTLET 1 1 1 1/2" ITEM 32 MIXOLOGY STATION (3 REQ'D) 24" x 42", per details. Page 4 of 20

ITEM 33 RINSER (5 REQ'D) Micro Matic USA Model GR 1581 Glass Rinser, replacement sprayer for GR UCM ITEM 37 GARBAGE CAN (4 REQ'D) Rubbermaid Model FG354000BLA Dimensions: 30(h) x 20(w) x 11(d) Slim Jim Waste Container, 23 gallon, 20"W x 11"D x 30"H, general purpose waste, open type without lid, high impact plastic construction, black ITEM 38 HAND SINK (4 REQ'D) Krowne Metal Model HS 9L Dimensions: 12(h) x 12(w) x 17(d) Space Saver Hand Sink, wall mount, 12"W x 17"D x 12"H O.A., 8"H backsplash, 9 3/4" wide x 11 3/4" front toback x 5" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF 4 ea Model H 107 Side Splashes for hand sink, pair INLET OUTLET 1 1/2" ITEM 39 BAR DRAINER (1 REQ'D) Bar top drainer insert, per details. ITEM 40 WORK COUNTER (2 REQ'D) 24" x 30"x36"h, cabinet base, butcher block top ITEM 43 SCUPPER RAIL (1 REQ'D) 5" wide, with drain, perforated removable insert, Katz Standard Detail. Length, layout per plan. Page 5 of 20

ITEM 44 GLASS RACK (3 REQ'D) Nationwide Fabrication Inc. Model DBGR 24 Dimensions: 37(h) x 24(w) x 24(d) Underbar Glass Rack Storage Unit, drainboard top, 24"W x 24"D, open front base, holds (2) 20" x 20" glass racks, 7"H backsplash, adjustable intermediate shelf & fixed bottom shelf, drain pan with removable perforated insert & 1/2" drain, stainless steel construction, stainless steel legs & adjustable bullet feet, ETL Common top (48"), alter ht to 36" INLET OUTLET 1 1 1/2" ITEM 45 DISHWASHER, UNDERCOUNTER (2 REQ'D) CMA Dishmachines Model L 1X16 W/HTR Dimensions: 34.25(h) x 24.25(w) x 23.5(d) PROVIDED BY VENDOR Dishwasher, undercounter, 24 1/4"W x 23 1/2"D x 34 1/4"H, with sustainer heater, low temperature chemical sanitizing, (30) racks/hour, 16"H dish clearance, built in chemical pumps & deliming system, built in primer switches & instant start, upper & lower stainless steel wash arms with reinforced end caps, pumped drain, pump purging system, built in strainer for water inlet, door safety switch, electrical components housed in stainless steel drawer, stainless steel construction, includes (1) open & (1) peg rack, 1 HP wash pump, NSF, UL, cul 2 ea 115v/60/1 ph, 16.0 amps, standard VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 115 60 1 16.0 INLET OUTLET 1 1/2" 1 1" ITEM 46 WINE STATION DRAINER CABINET (2 REQ'D) 48" x 48" x 37"h, perforated top drainer, cabinet base, per details. ITEM 50 REFRIGERATED MERCHANDISER (2 REQ'D) Master Bilt Products Model TEM 2 30SC Dimensions: 102(h) x 61.94(w) x 38.25(d) Endless Medium Temperature Merchandiser, Self Contained, 62" W, (2) 30" W hinged glass door sections (ends are not included), (10) cantilever shelves with tag molding, LED lighting, painted textured galvanized steel interior & exterior, temperature range 34 to 41 F, top mount coil, UL, cul, UL EPH 2 ea 2 year parts and labor warranty 2 ea 5 year compressor part warranty 2 ea 120/208 230v/60/1 ph, 12 amps (total cabinet with condensing unit) 4 wire direct 2 ea Black textured exterior finish 2 ea Black textured interior finish Page 6 of 20

1 VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 120/208 230 60 1 Direct 12.0 1 REMARKS 4 wire connection required ITEM 51 DRAFT BEER/WINE/COCKTAIL FAUCETS (2 REQ'D) Custom Model CUSTOM Per details ITEM 52 DRIP TRAY (2 REQ'D) 8"w Drip Tray for item #51 ITEM 53 RINSER (2 REQ'D) Micro Matic USA Model GR 1581 Glass Rinser, replacement sprayer for GR UCM ITEM 54 REFRIGERATED MERCHANDISER (1 REQ'D) Master Bilt Products Model TEM 3 24SC Dimensions: 102(h) x 72.31(w) x 38.25(d) Endless Medium Temperature Merchandiser, Self Contained, 72.31" W, (3) 24" W hinged glass door sections (ends are not included), (15) cantilever shelves with tag molding, LED lighting, painted textured galvanized steel interior & exterior, temperature range 34 to 41 F, top mount coil, UL, cul, UL EPH 1 ea 2 year parts and labor warranty 1 ea 5 year compressor part warranty 1 ea 120/208 230v/60/1 ph, 12.0 amps (total cabinet with condensing unit) 4 wire direct 1 ea Black textured exterior finish 1 ea Black textured interior finish 1 VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 120/208 230 60 1 12.0 Page 7 of 20

ITEM 55 BACK BAR COOLER (1 REQ'D) Glastender Model BB84 Dimensions: 35(h) x 84(w) x 25.25(d) Refrigerated Back Bar Cabinet, three section, 84"W, self contained refrigeration, digital thermostat, LED interior lighting, front venting, automatic defrost timer & condensate evaporator, stainless steel interior, R134a, 1/4 HP, ETL 1 ea 1 year parts & labor warranty, 5 year compressor warranty (NOTE: applies to units sold and installed within the US & Canada) 1 ea 120v/60/1 ph, 6.5 amps, NEMA 5 15P, standard 1 ea Standard 34 to 40 F operation 1 ea (R) Refrigeration compartment on right side 1 ea Refrigeration compartment cover finish: Black vinyl clad, standard 1 ea Door style, first: Black vinyl clad, standard 1 ea Door hinge location, first: Left 1 ea Shelving style, first: bottom floor rack & two adjustable shelves, standard 1 ea Door handle, first: Polished stainless steel, standard 1 ea Door style, second: Black vinyl clad, standard 1 ea Door hinge location, second: Right 1 ea Shelving style, second: bottom floor rack & two adjustable shelves, standard 1 ea Door handle, second: Polished stainless steel, standard 1 ea Door style, third: Black vinyl clad, standard 1 ea Door hinge location, third: Right 1 ea Shelving style, third: bottom floor rack & two adjustable shelves, standard 1 ea Door handle, third: Polished stainless steel, standard 1 ea No finished top galvanized steel sub top, standard 1 ea Left side finish: Black vinyl clad, standard 1 ea Right side finish: Black vinyl clad, standard 1 ea Back finish: Galvanized steel, standard 1 ea No legs or casters, standard VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 1/4 Cord & 2 120 60 1 5 15P 6.5 15.0 Plug ITEM 62 BEVERAGE COUNTER (1 REQ'D) Per details, integral 12" x 21" ice bin, 12" x 14" hand lavatory w/splash, and 12" x 12" Drip Tray ITEM 62.1 PANTRY FAUCET (1 REQ'D) Fisher Model 3116 Faucet, deck mounted dual control, 12" rigid gooseneck spout, 1/2" inlet Page 8 of 20

INLET OUTLET ITEM 63 CHILLED DISPENSER (1 REQ'D) Crysalli Model CP2000 R UC BH Dimensions: 16.5(h) x 11.75(w) x 17(d) Artisan Water System, remote mount, under counter, self contained, sparkling and still water, (50) 12 oz. drinks per hour at 45 or less, 2 1/2 gallon water bath, 6 lbs ice bank, 40 to 100 temperature range, includes: install kit & fittings, 1/9 HP compressor, 7" CO2 hose with 1/4" flare fitting, 7" overflow drain hose, 1/4" JG bulk head connection point, R134a CFC free, NEMA 5 15P, 9' cord, 1600 BTU, 4.2 amps, 115v/60/1 ph, 3/8" NPT, ANSF, NSF, Made in USA 1 ea 1 year parts and labor warranty, standard 1 ea Model CBR V2C Crysalli Draft Tower, double faucet valve, 20 1/4" tall (overall), 15 1/2" high tower, 12 1/2" bottle clearance, ergonomic handles, adjustable flow rate, 1 1/2 to 2 oz. per second, quick connect fittings, sparkling & still water, cobra style, Chrome, ANSF, NSF, Made in USA VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 115 60 1 4.2 1/9 INLET OUTLET 1 1/4" 1 ITEM 65 ESPRESSO MACHINE (1 REQ'D) Vendor Model ESPRESSO Vendor supplied, Automatic ITEM 66 REACH IN UNDERCOUNTER REFRIGERATOR (1 REQ'D) True Food Service Equipment Model TUC 24 HC Dimensions: 32.63(h) x 24(w) x 24.75(d) Undercounter Refrigerator, 33 38 F, stainless steel top & sides, (1) stainless steel door, (2) shelves, clear coated aluminum interior with stainless steel floor, (2) front leg levelers & (2) rear recessed castors, front breathing, R290 Hydrocarbon refrigerant, 1/6 HP, 115v/60/1, 2.0 amps, 7' cord, NEMA 5 15P, culus, NSF, CE, MADE IN USA 1 ea Self contained refrigeration standard 1 ea Warranty 5 year compressor (self contained only), please visit www.truemfg.com for specifics 1 ea Warranty 3 year parts and labor, please visit www.truemfg.com for specifics 1 ea Alternative hinging available, please contact factory 1 ea NOTE: Model features (2) front leg levelers and (2) rear recessed castors resulting in cabinet height of 32 3/4" NO other castor/leg options are available for this model VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & 1 115 60 1 5 15P 2.0 1/6 Plug Page 9 of 20

ITEM 67 SERVICE COUNTER (1 REQ'D) General Contractor Model CUSTOM 48" x 48" x 42"h, per details. Chem Top surface (black) ITEM 68 REFRIGERATED COUNTER AT WOOD FIRE STATION (1 REQ'D) Overall 15' 0" x 3' 0" x 36"h, remote refrigeration Icondensers by others) coils by NFI, Left to right: refrigerated door, hinge left, mullion coil, 1 bay refrigerated drawers (Katz style) 2 high for 6" deep pans), 2 bays sheet pan slides, 3" cc, integral 12"x14"x8" d hand lav with side shields above, 1 bay refrigerated drawers (Katz style) 2 high for 6" deep pans), mullion coil,, refrigerated door, hinge right. raised rail, flat, to accomodate 1/9 pans full length, with drain. ITEM 68.1 PANTRY FAUCET (1 REQ'D) Fisher Model 3116 Faucet, deck mounted dual control, 12" rigid gooseneck spout, 1/2" inlet INLET OUTLET ITEM 75 OVEN, WOOD / COAL / GAS FIRED (1 REQ'D) Earthstone Woodfire Ovens Model 110 DUE PAGW Dimensions: 80(h) x 92.25(w) x 51.5(d) Gas/Wood Combination Oven, single burner, (6) 16", (10 11) 12" pizza capacity, 80.5" W x 42.5" D hearth, (2) digital controllers, includes ceramic fire log set, aluminum door, stainless steel flue adapter, stainless pizza peel, 175,000 BTU, ETL Sanitation, cetlus 1 ea One (1) parts and labor warranty for gas/electrical 1 ea Five (5) year on refractory material (parts only) 1 ea Natural gas 1 ea 120v/50/60/1 ph, 3.0 amps 1 ea Double Hearth Opening 1 ea Powder coated black enclosure, standard 1 ea Stainless steel trim hood cover 1 ea Granite mantle finish: Black VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 120 60 1 3 GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 1" 175.0 1 Page 10 of 20

ITEM 76 ELECTRIC BAKE OVEN (1 REQ'D) pizza master Model 723 44.3" x 35.6" x 45.7h, 208/3, 18.9A per deck, 3 decks. ITEM 77 SERVICE COUNTER (1 REQ'D) General Contractor Model CUSTOM 48" x 48" x 42"h, per details. Cabinet base to accomodate 2 bays of pizza boxes (18" x 26" x 5" CC), customer side to be open shelving, Chem Top surface (black) ITEM 78 EXPEDITER COUNTER (1 REQ'D) 78" x 24", curb mounted, bottom and middle shelf. ITEM 82 CHEF COUNTER A (1 REQ'D) 14' 6" x 3' 1" x 3' 0"h, overall, Left to Right: sink compartment, 12" x 14" x8" deep sink, drain at back, trash below, refr door, hinge left, mullion coil, 1 bay, 2 high drawers (Katz style),1 bay sheet pan slides, 3" cc, 1 bay, 2 high drawers (Katz style), top drawer refrigerated, bottom drawer freezer, refr door, hinge right, sink compartment, 12" x 14" x8" deep sink, drain at back, trash below, raised rail, flat, to accomodate 1/9 pans, full length. Remote refrigeration. ITEM 82.1 PANTRY FAUCET (2 REQ'D) Fisher Model 3116 Faucet, deck mounted dual control, 12" rigid gooseneck spout, 1/2" inlet INLET OUTLET ITEM 83 REFRIGERATED WORK COUNTER (1 REQ'D) 18' 0" x 3' 1" overall, 2 bays, 2 high refrigerated drawers, centered, open shelving left and right (middle and bottom), butcher block top. Page 11 of 20

ITEM 84 CHEF COUNTER B (1 REQ'D) 14' 6" x 3' 1" x 3' 0"h, overall, Left to Right: sink compartment, 12" x 14" x8" deep sink, drain at back, trash below, refr door, hinge left, mullion coil, 1 bay, 2 high refrigerated drawers (Katz style),1 bay sheet pan slides, 3" cc, 1 bay, 2 high drawers (Katz style),, refr door, hinge right, sink compartment, 12" x 14" x8" deep sink, drain at back, trash below, raised rail, flat, to accommodate 1/9 pans, full length. Remote refrigeration. ITEM 84.1 PANTRY FAUCET (2 REQ'D) Fisher Model 3116 Faucet, deck mounted dual control, 12" rigid gooseneck spout, 1/2" inlet INLET OUTLET ITEM 85 ISLAND COOKING SUITE (1 REQ'D) Hestan Model "KELLY WHITAKER" Per shop Drawing ITEM 87 EXHAUST HOOD PACKAGE (1 REQ'D) Captive Aire Model CUSTOM PROVIDED BY GC Island Hood with MUA, LED lighting, Overlapping fire protection (no low nozzles), reference shop drawing from Hestan. ITEM 93 SPIRAL DOUGH MIXER (1 REQ'D) Doyon Baking Equipment Model AEF035SP Dimensions: 46.88(h) x 21.75(w) x 41.25(d) Spiral Mixer, 120 lb. dough capacity, 2 speeds, programmable digital control, stationary stainless steel bowl, safety guard & mixing tools, cast iron frame with enamel coated steel finish, 4 HP & 1 HP, 208 240/60/1 ph, 18 amps 1 ea INTERNATIONAL ORDERS: Any orders outside the United States or Canada will be subject to a 5% International Warranty Fee added to the invoice 1 ea Two year parts and one year labor warranty, standard VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & 1 208 240 60 1 L15 20P 18.0 5 Plug Page 12 of 20

ITEM 94 BAKERY TABLE (1 REQ'D) 84" x 84" x 42" h. Recessed Leg base. ITEM 95 PREP SINK (1 REQ'D) 12' 9" x 2 6" overall, 36" left drainboard, 2@18"x12'D sink compartments, integral hand lav with splash guard at left end, 12" x14" x8"d, marine edge front, right, and left, splash at rear and right, crossrails sides and rear. ITEM 95.1 WALL / SPLASH MOUNT FAUCET (1 REQ'D) Fisher Model 3254 Faucet, wall mount, 8" adjustable centers, 14" swing spout, 1/2" inlets INLET OUTLET ITEM 95.2 LEVER (2 REQ'D) Fisher Model 24872 Twist Waste Valve, with overflow assembly, 3 1/2" industry standard sink opening, 1 1/2" drain outlet, flat strainer, stainless steel INLET OUTLET 1 1 1 1/2" ITEM 97 PANTRY FAUCET (1 REQ'D) Fisher Model 3116 Faucet, deck mounted dual control, 12" rigid gooseneck spout, 1/2" inlet INLET OUTLET Page 13 of 20

ITEM 98 WIRE SHELVING UNIT (1 REQ'D) Nexel Model 18548Z Dimensions: 86(h) x 54(w) x 18(d) Starter Shelving Unit, wire, 54"W x 18"D x 86"H, (4) shelves, (4) posts & plastic shelf clips, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating ITEM 101 WALL / SPLASH MOUNT FAUCET (1 REQ'D) Fisher Model 3254 Faucet, wall mount, 8" adjustable centers, 14" swing spout, 1/2" inlets INLET OUTLET ITEM 102 CLEAN DISH TABLE/POT WASH SINK (1 REQ'D) 12' 0" x 2' 6" overall, lleft end connects to dish machine, 3@24"x12"d sink compartments, splash at rear and right end, square edge detail at front., crossbracing sides and rear ITEM 102.1 PRE RINSE FAUCET ASSEMBLY, WITH ADD ON FAUCET (1 REQ'D) Fisher Model 34479 Pre Rinse Unit, 8" c/c backsplash mount, with spring action flexible gooseneck, wall bracket, Add On Faucet with 14" swing spout INLET OUTLET ITEM 102.2 LEVER (3 REQ'D) Fisher Model 24872 Twist Waste Valve, with overflow assembly, 3 1/2" industry standard sink opening, 1 1/2" drain outlet, flat strainer, stainless steel Page 14 of 20

INLET OUTLET 1 1 1 1/2" ITEM 103 DISHWASHER, DOOR TYPE (1 REQ'D) American Dish Service Model 5CD LF Dimensions: 71.25(h) x 44(w) x 35(d) PROVIDED BY VENDOR Dishmachine, door type, low temp chemical sanitizing, double rack, corner double, left front door opens with right side door, (74) racks/hour, 20 1/2" door opening, (1) 1 1/2 HP pump, auto start, air gap fill, top mount controls, built in chemical dispensing, built in scrap accumulator, 115 volt, 20 amp 1 ea Contact factory for lower freight quote VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 115 20 1 1/2 ITEM 104 CONDENSATE HOOD (1 REQ'D) Captive Aire Model CONDENSATE HOOD PROVIDED BY GC: Condensate Hood, 60" x 36" x 12" de, full gutter with drain. Field cut duct opening. ITEM 105 SOILED DISH TABLE (1 REQ'D) L Shape 5' 6" x 2' 6" right end connects to dish machine, 1@24"x12"d sink compartments, splash at rear, square edge detail at front., crossbracing sides and rear ITEM 105.1 PRE RINSE FAUCET ASSEMBLY, WITH ADD ON FAUCET (1 REQ'D) Fisher Model 34479 Pre Rinse Unit, 8" c/c backsplash mount, with spring action flexible gooseneck, wall bracket, Add On Faucet with 14" swing spout INLET OUTLET ITEM 105.2 LEVER (1 REQ'D) Fisher Model 24872 Twist Waste Valve, with overflow assembly, 3 1/2" industry standard sink opening, 1 1/2" drain outlet, flat strainer, stainless steel Page 15 of 20

INLET OUTLET 1 1 1 1/2" ITEM 106 HAND SINK (2 REQ'D) Krowne Metal Model HS 9L Dimensions: 12(h) x 12(w) x 17(d) Space Saver Hand Sink, wall mount, 12"W x 17"D x 12"H O.A., 8"H backsplash, 9 3/4" wide x 11 3/4" front toback x 5" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF 2 ea Model H 107 Side Splashes for hand sink, pair INLET OUTLET 1 1/2" ITEM 110 WALK IN COOLER/BEER COOLER (1 REQ'D) Arctic Industries Model CUSTOM 8' 0" x 17' 4" x 8' 6"h, Walk in Cooler w/ floor in cooler, with interior ramp, remote air cooled exterior refrigeration, low profile center mount coils, white interior, door per plan. Curtain at beer section, secondary coil at beer to maintain 35F. ITEM 111 DRAFT BEER SYSTEM POWER PACK (1 REQ'D) Micro Matic USA Model MMPP4301 PKG Dimensions: 27.5(h) x 29(w) x 18(d) Pro Line Draft Beer System Power Pack, air cooled, 29"W x 18"D x 27 1/2"H, (2) 80 gph vane circulating pumps with 1/3 HP motor each, 125' maximum run to taps, 11.5 gallon capacity glycol bath, digital thermostat, insulated cabinet with cover, R134a, 1/3 HP compressor, 115v/60/1 ph, 19.5 amps, NEMA L5 30P, ETL 1 ea 18 months material & workmanship, 5 year prorated warranty on compressor, standard VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & 1 115 60 1 L5 30P 19.5 1/3 30.0 Plug 2 1/3 3 1/3 1 REMARKS Compressor HP 2 REMARKS Circulating pump HP 3 REMARKS Circulating pump HP Page 16 of 20

ITEM 112 WIRE SHELVING UNIT (3 REQ'D) Nexel Model 24727Z Dimensions: 74(h) x 72(w) x 24(d) Starter Shelving Unit, wire, 72"W x 24"D x 74"H, (4) shelves, (4) posts & plastic shelf clips, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating 1 ea Model 24607Z Starter Shelving Unit, wire, 60"W x 24"D x 74"H, (4) shelves, (4) posts & plastic shelf clips, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating ITEM 115 WIRE SHELVING UNIT (2 REQ'D) Nexel Model 24608Z5 Dimensions: 86(h) x 60(w) x 24(d) Starter Shelving Unit, wire, (5) shelves, (4) posts & plastic shelf clips, 60"W x 24"D x 86"H, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating 1 ea Model 24488Z Starter Shelving Unit, wire, 48"W x 24"D x 86"H, (4) shelves, (4) posts & plastic shelf clips, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating 1 ea Model 24728Z5 Starter Shelving Unit, wire, (5) shelves, (4) posts & plastic shelf clips, 72"W x 24"D x 86"H, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating 5 ea Model S1460Z Shelf, wire, 60"W x 14"D, Poly Z Brite clear powder epoxy over zincchromate electro plating finish protected by Nexgard anti microbial coating 4 ea Model P86Z Post, 86"H, adjusts on 1" increments, for use with standard wire shelves, Poly Z Brite clear powder epoxy over zinc chromate electro plating finish protected by Nexgard anti microbial coating (must be purchased in multiples of 4) 1 st Model AM Shelf Clip Set, plastic, includes 4 pairs per set ITEM 116 MOP SINK (1 REQ'D) General Contractor Model MOP SINK By GC ITEM 116.1 SERVICE FAUCET (2 REQ'D) Fisher Model 2445 Service Sink Faucet, short spout, with vacuum breaker, 1/2" inlet, polished chrome INLET OUTLET ITEM 118 REACH IN REFRIGERATOR (1 REQ'D) True Food Service Equipment Model T 23 HC Dimensions: 78.38(h) x 27(w) x 29.5(d) Refrigerator, Reach in, one section, stainless steel door, stainless steel front, aluminum sides, clear coated aluminum interior with stainless steel floor, (3) adjustable PVC coated wire shelves, interior lighting, 4" castors, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1, 2.8 amps, 9' cord, NEMA 5 15P, culus, UL EPH Classified, CE, MADE IN USA 1 ea Self contained refrigeration standard 1 ea Warranty 5 year compressor (self contained only), please visit www.truemfg.com for specifics Page 17 of 20

1 ea 4" Swivel castors, standard (adds 5" to OA height) 1 ea Warranty 3 year parts and labor, please visit www.truemfg.com for specifics 1 ea Left door hinging VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & 1 115 60 1 5 15P 2.8 1/5 Plug ITEM 120 ICE CUBER (1 REQ'D) Hoshizaki Model KM 901MRH3 Dimensions: 37.44(h) x 30(w) x 27.38(d) Ice Maker, Cube Style, remote air cooled, remote condenser (priced separately), approximately 899 lb. capacity/24 hours, crescent cube style, stainless steel exterior, R 404A refrigerant, 208 230v/60/3 ph, 7.0 amps, NSF, UL 1 ea Warranty: 3 Year parts & labor on entire machine 1 ea Warranty: 5 Year parts & labor on evaporator 1 ea Model URC 9F Remote Condenser, R 404A refrigerant, crossing legs, 115v/60/1, for KML 631MRH, KMD 850MRH, KM 901MRH(3), KMD 901MRH50, and KMD 901MRH 1 ea Model HS 2150 Quick Disconnect Kit (not required if line set is ordered) 1 ea Model B 800SF Ice Bin, top hinged front opening door, approximately 600 lb. ice storage capacity, for top mounted ice makers, stainless steel exterior, painted legs included, protected with H GUARD Plus Antimicrobial Agent, ETL Sanitation 1 ea Model HS 2034/HS 2032 Top Kits, (HS 2034, 14") & (HS 2032, 4"), accommodates 30" wide ice machine, for single or stacked machines 1 ea Warranty: 3 Year parts & labor for bin VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 208 230 60 3 Direct 7.0 20.0 2 115 60 1 INLET OUTLET 1 1/2" 1 3/4" 2 2 3/8" 3 3 3/4" PLUMBING 1 REMARKS Ice maker drain PLUMBING 2 REMARKS 3/8" dew drain ITEM 121 NUGGET ICE MAKER (1 REQ'D) Kold Draft Model GB561AK Dimensions: 17(h) x 42.25(w) x 25.63(d) Ice Maker, cube style, air cooled condenser, approximately 557 lbs. production/24 hour, stainless steel exterior & frame, cubelet ice, stackable, 115v/60/1 ph, cetlus, NSF 1 ea 3 yr. parts & labor & 5 yr. compressor & evaporator warranty, std. 1 ea Model KDB650D Ice Storage Bin, sloped front, divided, top hinged front opening single door, 650 lbs. ice storage capacity, polyethylene interior liner, stainless steel exterior, 6" legs, for GB series ice makers & crushers 1 ea Model T281 Ice Crusher, cubed or crushed ice, stainless steel cabinet, crusher mechanism & hopper, used in line with GB561 cubers & bins, 115v/60/1 ph, cetlus, NSF, MADE in USA Page 18 of 20

VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 115 60 1 2 115 60 1 ITEM 122 FLOOR TROUGH (1 REQ'D) 72" x ", 4" deep, 3" waste, centered drain. ITEM 500 MISC S/S (1 REQ'D) Nationwide Fabrication Inc. BUDGET Miscellaneous S/S ITEM 501 EQUIPMENT INSTALLATION (1 REQ'D) Max Marketing BUDGET Equipment Installation ITEM 502 RECEIVING/STAGING/DELIVERY (1 REQ'D) Advantage Crating BUDGET Staging and Delivery ITEM 503 REFRIGERATION INSTALLATION (1 REQ'D) Custom BUDGET Refrigeration Installation; Walk in Cooler and Freezer Mechanical. Hang evaporators and mount condensing units on top of walk ins. Run drain lines to the outside of the box. Price does not include electrical supply, concrete coring, roof penetrations or patching, fire cualking or drywall repair. ITEM 504 BEER/WINE INSTALLATION (1 REQ'D) Custom BUDGET Beer/Wine System Installation Page 19 of 20

ITEM 505 FIELD COORDINATION (1 REQ'D) Max Marketing Model CUSTOM Field Coordination by authorized SDND Representative; $500 + per diem, per person, per day. Page 20 of 20