Combo InJet 388 CD PCB cleaning STENCIL cleaning PUMPINT cleaning CHAMBE
InJet 388 CD TECHNICAL PAAMETES Dimensions (w x l x h) Weight Ø energy consumption per 1 cycle Cleaning fluid consumption per 1 cycle Compressed air consumption per 1 cycle Max. dimensions of the cleaned parts Exchangeable mechanical filter of cleaning fluid Exchangeable mechanical filter of rinsing fluid 1400 x 1492 x 1876 mm 450 kg 1,85 kwh 0,05 0,3 l 3 l / 5 Bar 190 x 860 x 760 mm 20-100 μm 5-20 μm Operating pressures cleaning 1,8 Bar - 3 Bar pre-rinsing 0,3 Bar - 1,2 Bar rinsing 0,3 Bar - 1,2 Bar Cleaning fluid flow rate 200 l / min Temperature range setting of the cleaning fluid From ambient temperature to 60 C Temperature range setting of the pre-rinse fluid From ambient temperature to 60 C Temperature range setting of the rinse fluid From ambient temperature to 60 C Conductivity range settings of the pre-rinse fluid Conductivity range settings of the rinse fluid 0-40, 0-400, 0-2000 μs/cm 0-40, 0-400, 0-2000 μs/cm Temperature range setting of the drying From ambient temperature to 80 C Noise level Device control < 70 db PLC + 8,4 touchscreen INSTALLATION EQUIEMENTS Power supply Power connection Pmax Connection to central air pressure ecommended working pressure Exhaust pipe diameter 400 V, 50Hz (3+N+PE) EU 32 A 12 kw Pipe Ø 6 mm + Ø 10 mm 4,5 Bar Ø 100 mm Exhaust pipe capacity 380 m 3 /h Volume of the storage tanks for cleaning Volume of the storage tanks for pre-rinsing and rinsing Service space required around the device 75 l 75 and 75 l 600 mm
InJet 388 CD 4 INDIVIDUAL POCESSES C CLEANING INSING PE-INSING D DYING D INSING FILTE CLEANING FILTE PE-INSING FILTE C CLEANING PAAMETES Application name ecommended application ecommended temperature ecommended time Capacity per shift PCB 35 55 C 30 min. 384* Stencils 20 40 C 18 min. 27 Pumprints 40 55 C 38 min. 13 * highly recommended eurocards (100x160 mm) per 8 hours (work shift)
InJet 388 CD STANDAD EQUIPMENT 1 process chamber, fully automatic solution PLC + 8,4" touchscreen Uncontrolled rotation arms - 2 arm Lockable travelling wheels 100% closed circuit Cleaning fluid heating Pre-rinsing fluid heating insing fluid heating Hot air drying Chimney flap with draft diverter Pneumatic door lock 2 powerful hot air blowers Electronic monitoring of the fluid pressure High capacity stainless steel filter housing - DCT utility design 100% stainless steel design - 15 years warranty: - cleaning, rinsing and drying distribution - process chamber - storage tanks Designed for easy maintenance and servicing Optimized stainless steel nozzles Emergency stop button Spare parts (Base kit) OPTIONAL ACCESSOY - MANUFACTUING PAT OF THE MACHINE Controlled rotation arms adjustable speed - 2 arms Controlled rotation arms adjustable speed - 3 arms Additional drying technology air knife Fluid leakage tray - stainless steel Status light acoustic signalization Barcode reader, including software Active filter continued on next page
InJet 388 CD Traceability offline (CD view SW) Traceability online OPC server SW for CVA calculation (installed on android platform or cleaning device) Common fluids draining - manual control Conductivity measurement - pre-rinse circuit Conductivity measurement - rinse circuit OPTIONAL ACCESSOY - NOT MANUFACTUING PAT OF THE MACHINE Mechanical carrier frame for PCBs Spare adjustable arm for mechanical carrier frame for PCBs Mechanical table holder for PCBs or stencils External pump for comfortable fluid refilling External pump manipulation trolley position for pump and 2 x 25 liter can 25L External filtration set 3 x 25 lit (1 x Active Carbon, 2 x Ionex, 1 x mech. filter) - SANDWICH filtration OPTIONAL ACCESSOY - INDIVIDUAL ODE Mechanical carrier frame for squeegees DEK Mechanical carrier frame for VectorGuard stencils Mechanical carrier frame for frameless stencils Mechanical carrier frame for small stencils (15,17 and 23 inch) Mechanical carrier frame according customer specification OPC server setting - IT specialist service Automatic fluid refilling Automatic fluid discharging Other customized modifications
100% STAINLESS STEEL DESIGN AISI 304/316 15 &3 YEAS WAANTY made in CZECH EPUBLIC Date of issue: October 2017 InJet is a registration trademark of DCT Czech s.r.o. For more information about InJet 388 CD you can contact DCT specialist in your country or the manufacturer directly. DCT Czech s.r.o., Tovární 85, 679 21 Černá Hora, Czech republic e-mail: info@dct.cleaning