Blanket and Solution Warming Cabinets CMP has been building high quality warming cabinets for over 60 years and has become the industry standard for hospital and emergency room blanket and solution storage. CMP stainless steel Warming Cabinets can be found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty. Features: Stainless Steel Construction Many Standard Sizes Available Custom Sizes Electric Heated Compartments Microprocessor Control System Digital Display Over Temperature Alarm 80 180 F Temperature Range U.L. Listed Separately Controlled Chambers Wire Shelves to maximize airflow ± 2 F Accuracy Removable Pilaster Strips for easy cleaning Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Blanket and Solution Warming Cabinets Models: DSW1AE Single Compartment Heat 30 wide x 21 or 27 deep x 45 high (outside dimensions) 6.17 cu. ft. (21 deep) & 8.55 cu. ft. (27 deep) Optional 74 high unit 13.07 cu. ft. (21 deep) & 18.13 cu. ft. (27 deep) Adjustable Wire Shelf DSW2AE Available with Two Compartment Heat or Upper Heated Compartment and Lower Storage Compartment 30 wide x 21 or 27 deep x 74 high (outside dimensions) 12.33 cu. ft. (21 deep) & 17.10 cu. ft. (27 deep) Adjustable Wire Shelves DSW3AE Single Compartment Heat 30 wide x 21 or 27 deep x 26 high (outside dimensions) 3.39 cu. ft. (21 deep) & 4.71 cu. ft. (27 deep) Available 18 or 24 wide x 21 deep x 26 high 1.86 cu. ft. (18 wide) & 2.63 cu. ft. (24 wide) Custom Sizes Available Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Blanket and Solution Warming Cabinets Specifications: Continental Metal Products Warming Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish. The heating chamber shall be insulated with 1 ½ thick fiberglass insulation. DSW1AE models contain one adjustable wire shelf and DSW2AE models contain three adjustable wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾ thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a pass-through feature, enabling loading of the Warming Cabinet from either side of unit. The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet. Service Requirements: DSW1AE 120V, 60HZ, 1PH, 7 Amps DSW2AE (One Compartment Heat) - 120V, 60HZ, 1PH, 7 Amps DSW2AE (Two Compartment Heat) - 120V, 60HZ, 1PH, 12.5 Amps DSW3AE 120V, 60HZ, 1PH, 7 Amps Units are also available for 220/240V, 50/60HZ Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Blanket and Solution Warming Cabinets Options: 18 or 24 deep (inside dimensions) Left or right side door hinging Freestanding or recessed mounting Pass-through feature Clear Thermopane glass doors 74 high DSW1AE Keyed door lock Casters for mobility USB connection for exporting temperature data Temperature adjustment lock-out Chart recorder Stainless steel base for DSW1AE or DSW3AE Lower heated or unheated chamber for DSW2AE Custom sizes Seismic anchoring Stainless steel table (36 w. x 25 d. x 36 h.) Custom temperature adjustment range Custom alarm settings Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net