HBEAM 1.5 PRE-DESIGED HB1.5 PRE-DESIGED STRAIGHT SECTIOS (FT - 8FT) PRE-DESIGED STRAIGHT SECTIOS 1.5" Aperture ft - 8ft straight sections Specify with linear light and/or spotlights LAMPIG LED - Direct & Indirect - 80/90 CRI - 000K/500K/000K Output Options: MI/LOW/MED/HI/MAX/RGB Dimming down to 0% FIISH Anodized Aluminum, White, Black, Silver, Brass, RAL Classic Colors COSTRUCTIO Industrial Strength Extruded 6061 Aluminum QuickShip Eligible ETL Listed 108
PRODUCT SUBMITTAL WORKSHEET SAMPLE PRODUCT CODE HB1.5S S8 HI/90/500 0/10V/S EXT SL/MED/80/500/5 5 0/10V/S MED/90/500 0/10V/S EXT WH UV EMB/1 1 5 6 7 8 9 10 11 1 1 1A ELGHT/1 COMBO SB 1B 1C 1. BASE MODEL (CHOOSE OE) HB1.5S HB1.5W * HB1.5SMB. OMIAL LEGTH (CHOOSE OE) 1.5" Suspended 1.5" Wall-Mount 1.5" Wall/Surface, Back-Mounted, Front-Facing *Wall Mount not specifiable with LED Spotlights as LED hot-spotting will be visible on wall surface. Suspended Wall-Mount* Surface (Back) Mount S S S S5 S6 S7 S8 ' (") section ' (6") section ' (8") section 5' (60") section 6' (7") section 7' (8") section 8' (96") section *Lengths are nominal and may vary based on lamping and other specification selections. Consult ALW when exact lengths are required.. LED LAMPIG LIEAR/DIRECT (CHOOSE OE OR OE UDER A, B, & C, AS ECESSARY) one. Select when direct lamping is not desired or when specifying continuous spotlights. MI 80 000K DELIVERED LUMES (LM/FT) WATTS (W/FT) LOW 90 500K MED HI MAX RGB 000K See page 9 for complete details. 1 CRI/CCT not applicable for RGB lamping. EFFICACY (LM/W) Up to 81 lm/w. REMOTE DRIVER LIEAR/DIRECT (CHOOSE OE) 0/10V/S 0/10V/1% 0/10V/0% DALI DMX ECOSYS1 ECOSYS5 one. Select when direct lamping is not desired or when specifying continuous spotlights. 0-10V dimming down to 5% (Standard Dimming) 0-10V dimming down to 1% 0-10V premium dimming down to 0% DALI flicker-free dimming down to 0% DMX flicker-free dimming down to 0% (Select for RGB lamping) Lutron Hi-lume 1% EcoSystem, constant current Lutron 5-Series 5% EcoSystem, constant current * Driver specifications provided upon request to assist with control system integration. = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "". OTE: Maximum 800 ft. of QuickShip-eligible product per order. SS1118-A.0 of 1
5. LES LIEAR/DIRECT (CHOOSE OE) EXT one. Select when direct lamping is not desired or when specifying continuous spotlights. Cover plate provided to match housing finish. Extra diffuse, white frosted 6. LED SPOTLIGHT DIRECT * (SELECT OE OR OE UDER A, B, D, & E) All standard spotlight options below are QuickShip-qualifying. one. Select when spotlights are not desired or when specifying Wall Mount base model. B. OUTPUT C. CRI D. CCT E. BEAM SPREAD A. SPOT * SL MI 80 000K (Continuous) LOW 000K SL MED (Cluster of ) HI (Cluster of 6) SL *LED Spotlights not specifiable with HB1.5W Wall Mount as LED hot-spotting will be visible on wall surface. For SL, must select OE for linear/direct lamping. 5 0 7. QUATITY SPOTLIGHT * (CHOOSE OE FOR CUSTOM QUATITY/SPACIG, COSULT ALW) SC * SE * * one. Select when spotlights are not desired. Continuous spotlights (O linear lamping). Compatible with all lengths, must select OE for Direct Lamping. See pg. 8 for details. Spotlights WITHOUT linear direct lamping. Spotlights & cover plates intermittently spaced ~1ft. Select OE for Direct Lamping. Spotlights WITH linear direct lamping. Select spotlight quantity below. Compatible only with ft-8ft sections. See pgs. 7-8 for details. *LED Spotlights not specifiable with HB1.5W Wall Mount as LED hot-spotting will be visible on wall surface. SL ( CLUSTER) QUATITY OPTIOS FT FT 5FT 6FT 7FT 8FT 5 5 5 (6 CLUSTER) QUATITY OPTIOS FT FT 5FT 6FT 7FT 8FT 5 () o Spotlight Clusters (SC) Continuous Spotlights (SE) This is a 6ft section with spotlights intermittently spaced every 1ft and no linear lamping. () : This is a 6ft section with a quantity of three () (6-Cluster) spotlights along with linear lamping. = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "". OTE: Maximum 800 ft. of QuickShip-eligible product per order. SS1118-A.0 of 1
8. REMOTE DRIVER SPOTLIGHT (CHOOSE OE) [ ] 0/10V/S 0/10V/1% 0/10V/0% DALI DMX one. Select when spotlights are not desired. Same as Driver Linear/Direct. Select this option when specifying both Linear/Direct AD Spotlight lamping. 0-10V dimming down to 5% 0-10V dimming down to 1% 0-10V premium dimming down to 0% DALI flicker-free dimming down to 0% DMX flicker-free dimming down to 0% *Driver specifications provided upon request to assist with control system integration. 9. LED LAMPIG IDIRECT (CHOOSE OE OR OE UDER A, B, & C, AS ECESSARY) one. Select when specifying SMB base model or when indirect lamping is not desired MI 80 000K DELIVERED LUMES (LM/FT) WATTS (W/FT) LOW 90 500K MED HI MAX RGB 000K See page 9 for complete details. CRI/CCT not applicable for RGB lamping. EFFICACY (LM/W) Up to 81 lm/w 10. REMOTE DRIVER IDIRECT (CHOOSE OE) 0/10V/S 0/10V/1% 0/10V/0% DALI DMX ECOSYS1 ECOSYS5 one. Select when specifying SMB base model or when indirect lamping is not desired. 0-10V dimming down to 5% (Standard Dimming) 0-10V dimming down to 1% 0-10V premium dimming down to 0% DALI flicker-free dimming down to 0% DMX flicker-free dimming down to 0% (Select for RGB lamping) Lutron Hi-lume 1% EcoSystem, constant current Lutron 5-Series 5% EcoSystem, constant current *Driver specifications provided upon request to assist with control system integration. 11. LES IDIRECT (CHOOSE OE) EXT one. Select when specifying SMB base model or when indirect lamping is not desired. Extra diffuse, white frosted = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "". OTE: Maximum 800 ft. of QuickShip-eligible product per order. SS1118-A.0 of 1
1. FIISH (CHOOSE OE) AL BK BRS SV WH WH/AM RAL atural Anodized Aluminum (Standard Finish) Black Powder Coat Brass Metallic Powder Coat Silver Powder Coat White Powder Coat White Antimicrobial Powder Coat (for healthcare environments) Specify RAL Classic Color code (ex: RAL00) ralcolorchart.com/ral-classic 1. VOLTAGE (CHOOSE OE) UV 7 Universal Voltage (10VAC-77VAC) 7 Volt (Driver options may be limited) 1. ADDITIOAL OPTIOS (OPTIOAL CHOOSE OE UDER A & B, AD AY UDER C, IF DESIRED) A. EMERGECY OPTIOS EMB/ 5 EMC/ 5 Emergency Battery (indicate quantity each battery powers up to a ft section) Emergency Circuit (indicate quantity of ft sections to be illuminated by emergency circuit) 5 For fixtures under ft in length, entire fixture will be illuminated with a proportional lumen output. Consult ALW for available options. B. SESOR OPTIOS (COMPATIBLE OLY WITH 0-10V DRIVERS DEFAULT QUATITY IS 1 SESOR PER 8FT, IDICATE ALTERATE QUATITY IF DESIRED) ELGHT/ 6 OS/ PH/ Enlighted remote smart sensor (occupancy, daylight, networking, and more) 0-10V remote occupancy sensor 0-10V remote photocell/daylight sensor 6 Enlighted Gateway and Energy Manager (by others) plus programming required. Learn more at enlightedinc.com. C. ADDITIOAL OPTIOS (COMPATIBLE OLY WITH SUSPEDED MODELS) COMBO SB Combination.5" canopy at power feed locations to accommodate both power cord & suspension mount hardware. Seismic Bracing = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "". OTE: Maximum 800 ft. of QuickShip-eligible product per order. SS1118-A.0 5 of 1
MECHAICAL DIAGRAMS SUSPEDED Suspended mounting can be specified with direct, indirect, or both direct and indirect lamping. WALL/SURFACE MOUT Wall mounting can be specified with direct, indirect, or both direct and indirect lamping. There are keyholes on the fixture for wall mounting, as shown. 0.5".5".5".5" 1." 1." 1." HB1.5S SUSPEDED MOUT HB1.5W WALL MOUT HB1.5SMB SURFACE (BACK) MOUT SUSPESIO MOUTIG SPOTLIGHT DIMESIOS CEILIG HARDWARE (1).5" canopy per power feed location, (1) bullet mount, (1) 8' aircraft cable (1) " canopy (for use with T-bar mounting) per suspension point.1" 6.6" COMBO CAOPY WALL MOUTIG Choose option COMBO to specify.5" canopies at feed locations with power feed and aircraft cable suspension mounting. Canopy finish is always white. Contact ALW for alternate colors..0.1 1.08 Eye Bolt (By Others) Gripper w/hook Aircraft Cable -Cable Clamp SEISMIC BRACIG Add-on hardware includes cable gripper with hook, -cable clamp and specified length of aircraft cable per suspension point. KEYHOLES For wall mounting, there will be keyholes on the fixture. The key hole dimensions are shown above, and fit a #8 screw. Keyholes can be specified at different locations along fixture, if necessary..0.5 SS1118-A.0 6 of 1
CLUSTER (SL) COFIGURATIOS FT FT QTY FT QTY 5FT QTY QTY 6FT 7FT QTY QTY QTY 5 QTY QTY QTY 5 8FT QTY QTY QTY 5 SS1118-A.0 7 of 1
6 CLUSTER () COFIGURATIOS FT COTIUOUS FT QTY COTIUOUS FT 5FT 6FT 7FT QTY QTY COTIUOUS QTY QTY COTIUOUS QTY QTY QTY COTIUOUS QTY QTY QTY QTY 5 COTIUOUS 8FT QTY QTY QTY QTY 5 COTIUOUS SS1118-A.0 8 of 1
ITERMITTETLY (EVELY) SPACED SPOTLIGHT COFIGURATIOS (O LIEAR LAMPIG) FT FT SL FT SL 5FT SL 6FT SL 7FT SL 8FT SL SS1118-A.0 9 of 1
PERFORMACE DETAILS DIRECT OR IDIRECT LIEAR LAMPIG OUTPUT DELIVERED LUMES (LM/FT) WATTS (W/FT) EFFICACY (LM/W) CRI OPTIOS CCT OPTIOS MI 7 00.5 LOW 7 00.75 HB1.5 LIEAR BOARD - DIRECT SC (0-180): 0.9 SC (90-70): 1.16 HB1.5 LIEAR BOARD - IDIRECT SC (0-180): 1.1 SC (90-70): 1.0 MED 7 00.5 Up to 81 lm/w 80 90 000K 500K 000K HI 7 600 6.75 MAX 800 9.0 RGB 8 Color-Changing RGB 5 /A /A /A HB1.5 LIEAR BOARD DIRECT / IDIRECT 7 Performance calculations are extrapolated estimates based on actual performance data of MAX output at 80 CRI and 500K and EXT lens. 8 DMX driver recommended; controller not included. PERFORMACE DETAILS SPOTLIGHT LAMPIG (PER SL CLUSTER DOUBLE FOR ) OUTPUT DELIVERED LUMES (LM) WATTS (W) EFFICACY (LM/W) CRI OPTIOS CCT OPTIOS MI 15 1. LOW 175.1 MED 50 Up to 89 lm/w 80 000K 500K 000K HB1.5 6-SPOT (5DEG LES) SC (0-180): 0.6 SC (90-70): 0. HI 75.6 HB1.5 6-SPOT (0DEG LES) SC (0-180): 0.80 SC (90-70): 0.76 SS1118-A.0 10 of 1
HB1.5 VOLTAGE DROP CHART FOR REMOTE DRIVERS WHITE LED (9VDC) For best performance, ensure proper wire gauge is installed between the remote LED driver and canopy that is dropping power to your fixture. This chart only applies to HB1.5 White LEDs at VDC. Do not use this chart to calculate voltage drop for other fixtures. WIRE GAUGE 0W 0.8A 0W 1.5A 0W 1.67A 50W.08A 60W.50A 70W.9A 80W.A 90W.75A 100W.17A 18 AWG 90 ft. 58 ft. 1 ft. 1 ft. 5 ft. 0 ft. 16 ft. 1 ft. 11 ft. 16 AWG 150 ft. 97 ft. 70 ft. 55 ft. ft. 7 ft. 1 ft. 7 ft. ft. 1 AWG ft. 158 ft. 117 ft. 9 ft. 75 ft. 6 ft. 5 ft. 8 ft. ft. 1 AWG 90 ft. 57 ft. 190 ft. 151 ft. 1 ft. 105 ft. 91 ft. 80 ft. 71 ft. 10 AWG 6 ft. 1 ft. 07 ft. 5 ft. 0 ft. 17 ft. 150 ft. 1 ft. 118 ft. HB1.5 VOLTAGE DROP CHART FOR REMOTE DRIVERS RGB LED (VDC) For best performance, ensure proper wire gauge is installed between the remote LED driver and canopy that is dropping power to your fixture. This chart only applies to HB1.5 RGB LEDs at VDC. Do not use this chart to calculate voltage drop for other fixtures. WIRE GAUGE 0W 0.8A 0W 1.5A 0W 1.67A 50W.08A 60W.50A 70W.9A 80W.A 90W.75A 100W.17A 18 AWG 59 ft. 7 ft. 6 ft. 19 ft. 1 ft. 11 ft. 8 ft. 7 ft. 5 ft. 16 AWG 99 ft. 6 ft. 6 ft. 5 ft. 8 ft. ft. 18 ft. 15 ft. 1 ft. 1 AWG 16 ft. 106 ft. 77 ft. 60 ft. 9 ft. 0 ft. ft. 0 ft. 6 ft. 1 AWG 6 ft. 17 ft. 18 ft. 100 ft. 8 ft. 69 ft. 60 ft. 5 ft. 6 ft. 10 AWG ft. 80 ft. 08 ft. 165 ft. 16 ft. 115 ft. 100 ft. 88 ft. 78 ft. SS1118-A.0 11 of 1
ADDITIOAL OPTIOS & SPECIFICATIOS LED PERFORMACE For standard lampings: L 70 > 5,000 hours. Luminous flux +/- 5%. LES Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. SESOR OPTIOS Optional, occupancy detection (OS) and/or daylight harvesting (PS) sensor available. Or upgrade to an optional Enlighted Smart Sensor (ELGHT) for additional capabilities. Contact ALW for details. FIISH Standard finish is "Ultimatte" aluminum a smooth, clean, and durable finish achieved from a deep etch and two-step clear anodizing process. Other options are shown below. EXT EXTRA DIFFUSE HOUSIG 100% recyclable, extruded architectural grade 6061 aluminum with a 0.08" minimum wall thickness. Aluminum White* Black Silver Brass RAL Classic *For healthcare environments, a white antimicrobial finish (WH/AM) is also available. SAFETY & REGULATORY ETL Listed (U.S. & Canada). Suitable for dry or damp locations. Conforms to UL std. 108, Low Voltage Luminaires / Low Voltage Lighting Systems. Certified to CSA std. C.#9.0:1996 Ed. 1+S1. OPERATIG TEMPERATURE Luminaire should be installed and operated OLY in dry or damp environments where the ambient temperature ranges from - F to 1 F (-0 C to 50 C). Luminaire operation in environments outside the listed temperature range voids the warranty AD may damage the product or adversely impact lamp life, lumen output and color consistency. WARRATY Limited 5-year warranty. Details: alwusa.com/warranty SS1118-A.0 1 of 1