MagnaClean DRX Compact and cost-effective, the 2, 3 and 4 ADEY MagnaClean DRX magnetic dirt filter range protects small to medium sized commercial hydronic heating systems from the dangers of damaging iron oxide. Built to ASME standards, this filter design consists of an innovative magnetic belt, containing numerous highperforming neodymium magnets, wrapped around a precision-engineered stainless-steel canister for easier installation and servicing. ADEY Innovation LLC (724) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: September 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? No The DRX is compact, lightweight and has an auto air-vent. It can be fitted horizontally; vertically; in-line and size-stream to suit any installation type and has virtually zero pressure drop. THIS PRODUCT IS: Water Efficient As high-efficiency equipment becomes more popular, MagnaClean DRX provides a way for specifiers and contractors to offer cost-effective water quality controls. By maintaining water quality and eliminating iron oxide from the system, narrow waterways typically found in high-efficiency equipment are less likely to clog, and components less likely to foul. 1. Unique magnetic belt makes servicing is quick and easy as minimal access around the filter is required. 2. Neodymium magnets ensure effective capture of magnetite, even through stainless wall. 3. Sprung-loaded magnets ensure magnets align properly with canister, maximizing sludge capture. 4. Patented design ensures low pressure loss. 5. Press fit installation makes this filter suitable for new installs and retrofits. 6. Small footprint means the product is suitable for commercial boiler rooms where space is limited.
7. Installation flexibility - filter can be installed horizontally or vertically, and in-line or side stream. 8. Automatic air-vent allows air to be automatically released from the hydronic heating system. 9. ASME approved. 10. Available in 2", 3" & 4".
EPIC Boiler The EPIC Fire Tube Boiler for residential applications in Canada. With four boiler models ranging from 80,000 to 199,999 Btu/hr. and three combi models ranging from 110,000 to 199,999 Btu/hr., offers easy installation and serviceability, true instantaneous response time and a user-friendly interface. In addition to 10:1 turndown and 95 percent Annual Fuel Utilization Efficiency (AFUE). Aqua-Tech/LOCHINVAR (736) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: March 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes 95% Afue Efficiency with 10:1 Turndown Ratio Capabilities, SMART CONTROL Enhanced Operating System. THIS PRODUCT IS: Energy Efficient Rapid, Reliable Hot Water Supply. Efficient Space Heating. EPIC Combi s patented control technology, featuring pre-heat and domestic hot water response enables it to deliver hot water almost instantaneously during frequent use cycles. EPIC Combi s Air Handler Interlock provides comfort and energy savings by switching from space heating to domestic hot water mode. 1. ASME Stainless Steel Fire Tube Boiler and Combi Boiler - 95% AFUE Efficiency with 10:1 Turndown Ratio Capabilities. 2. Intuitive Set-Up Wizard with Lochinvar's SMART CONTROL. 3. 5 Year Warranty on Parts, 10 Year Warranty on Heat Exchanger. 4. EPIC built with Contractor in mind-easy Serviceability, Combi Boiler has Three Sizes 110,000, 150,000 and 199,999 Btu/Hr Industry-Leading DHW Delivery Up to 4.8 GPM (EPIC EPC-199 @ 77 F Temp. Rise), True Instantaneous Response, Easy Installation and Serviceability c/w Universal Vent Connector, Rapid, Reliable Hot Water Supply and Efficient Space Heating.
EPIC Combi Boiler The EPIC Fire Tube Combi Boiler for residential applications in Canada. With four boiler models ranging from 80,000 to 199,999 Btu/hr. and three combi models ranging from 110,000 to 199,999 Btu/hr., offers easy installation and serviceability, true instantaneous response time and a user-friendly interface. In addition to 10:1 turndown and 95 percent Annual Fuel Utilization Efficiency (AFUE). Aqua-Tech/LOCHINVAR (736) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: March 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes 95% Afue Efficiency with 10:1 Turndown Ratio Capabilities, SMART CONTROL Enhanced Operating System. THIS PRODUCT IS: Energy Efficient Rapid, Reliable Hot Water Supply. Efficient Space Heating. EPIC Combi s patented control technology, featuring pre-heat and domestic hot water response enables it to deliver hot water almost instantaneously during frequent use cycles. EPIC Combi s Air Handler Interlock provides comfort and energy savings by switching from space heating to domestic hot water mode. 1. ASME Stainless Steel Fire Tube Boiler and Combi Boiler - 95% AFUE Efficiency with 10:1 Turndown Ratio Capabilities. 2. Intuitive Set-Up Wizard with Lochinvar's SMART CONTROL. 3. 5 Year Warranty on Parts, 10 Year Warranty on Heat Exchanger. 4. EPIC built with Contractor in mind-easy Serviceability, Combi Boiler has Three Sizes 110,000, 150,000 and 199,999 Btu/Hr Industry-Leading DHW Delivery Up to 4.8 GPM (EPIC EPC-199 @ 77 F Temp. Rise), True Instantaneous Response, Easy Installation and Serviceability c/w Universal Vent Connector, Rapid, Reliable Hot Water Supply and Efficient Space Heating.
DMF150 - Digital Mini Feeder The DMF150 is the newest Mini-Feeder added to Axiom s already extensive System Feeder Family. The DMF150 utilizes a feature-rich userfriendly digital pressure control and incorporates an integrated easy connect wall bracket, front-fill point, and top system connection all which help minimize space requirements. Axiom Industries Ltd. (433) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: January 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? No This system feeder has a digital control that allows users to set pressure settings. Has a low level alert output and integrated built-in wall bracket. THIS PRODUCT IS: Water Efficient The DMF150 is water efficient by controlling the volume of water that is put into your system. 1. The DMF150 was designed with a smaller, thinner tank, top system connection and easy fill access on the front of the tank. This helps minimize space requirements. 2. Also included on the back of the unit is an integrated easy connect wall bracket which requires minimal time to install. 3. The easy to use digital system control allows for the user to define and adjust pressure settings at the touch of a button and issues an LED warning light indicator to alert if system is at too high or too low pressure. 4. A mini-float inside the tank maximizes useable volume, shuts pump off and triggers low level alert when detected.
The Ginius Tank Ginius is an indirect water heater with Picanto, a patented heat exchanger design. Ginius allows for higher pressure ratings, higher output and less resistance to boiler flow. The heat exchanger & outer tank is stainless steel to ensure long service life. Backed by a lifetime warranty, Ginius is approved for up to 80psi boiler pressure with excellent hot water performance. Equipco/Triangle Tube (215) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: April 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes Picanto heat exchanger - improved performance, less resistance to boiler flow, and higher pressure rating. Heat exchanger and outer tank are constructed of passivated stainless steel for long service life. THIS PRODUCT IS: Energy Efficient The Ginius tank is insulated with two inches of CFC/HCFC-free foam bringing standby loss to less than one degree Fahrenheit per hour. Best is class heat transfer rates reduce required heat input, improving efficiency. 1. New heat exchanger design leads to best-in-class hot water output. 2. Made entirely of stainless steel to ensure long service life. 80 PSI heat exchanger pressure rating. 3. Lifetime warranty.
Argosy Buffer Tank Composite chilled water or Hydronic Buffer Tank. Flexcon Industries (517) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: October 2017 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes WHAT IS NEW INNOVATIVE OR AMAZING ABOUT THIS PRODUCT? Composite, lightweight, won t corrode, potable rated. THIS PRODUCT IS: Energy Efficient R12 insulation keeps water hot/cold to ½ degree Fahrenheit loss per hour. 1. Lightweight saves manpower, time and labour compared to equal sized steel buffer tanks. 2. Composite construction won't corrode, especially beneficial on chilled water applications. 3. Competitive advantage for a contractor using the Flexcon Composite BUF tank compared to steel buffer tanks as the Flexcon BUF tank could save the number of men required to install the Flexcon BUF tank compared to equal sized steel buffer tanks.
Navien NFB Fire Tube Boiler The Navien NFB Fire Tube Boiler is designed with an allnew patented, form-pressed and robotic laser-welded, stainless steel heat exchanger with a one-piece combustion chamber. Available in 175,000 and 199,900 Btu/h models, the NFB features a 10:1 turn down ratio, 95% AFUE, advanced integrated controls, remote access via NaviLink, field-gas convertibility, extremely low NOx levels and ease of installation. Navien, Inc. (115) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: September 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes The patented form-pressed and robotic laser-welded heat exchanger minimizes the number of weak points prone to thermal stress and erosion, while turbulators and baffles improve heat transfer and structural integrity. THIS PRODUCT IS: Energy Efficient, Sustainable At 95% AFUE, the Navien NFB high-efficiency condensing fire tube boiler received the Energy Star Most Efficient rating for 2018. Baffles in the heat exchanger extract the maximum amount of heat from the flue gases, lowering emissions. A stainless-steel heat exchanger creates a more durable and longer-lasting product. 1. Energy-efficient at 95% AFUE. 2. 10:1 Turn Down Ratio. 3. Sustainable materials and design. 4. Ease of installation and maintenance. 5. Advanced integrated control panel.
Radiant's R2KA 24/20 Combination Boiler Radiant's R2KA 24/20 Combination Boiler combines the convenience of a combi boiler with the comfort of stored DHW! Equipped with CombiTech technology, Radiant s R2KA 24/20 offers a proprietary dual coil T316 stainless steel heat exchanger for independent heating and DHW circuits. Rated at 99,000 btu s the 97% efficient R2KA 24/20 can be vented up to 100 in 2 PVC. Radiant Hydronics (628) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: June 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes Radiant s R2KA 24/20 is a combination boiler with on demand hot water and on-board indirect fired storage tank and can be vented up to 100 with 12 of clearance. THIS PRODUCT IS: Energy Efficient, Water Efficient Radiant s R2KA 24/20 offers 97% efficiency, low NOx and low noise for best-in-class savings and comfort. 1. Energy saving 97% efficient. 2. Space saving all-in-one design. 3. Two appliances in one eliminates one set of gas piping and venting. 4. 12" vent clearance for small space solutions.
Vitotrans 300 A packaged heat exchanger DHW system, offering a turn key solution for commercial applications requiring high volumes of domestic hot water, such as hospitals, universities, government buildings, large hotels, resorts and recreational complexes. Designed as an extension to an existing heating boiler, the Vitotrans 300 accurately provides 5 90 gpm of DHW when combined with a DHW buffer tank. Viessmann Manufacturing Company Inc. (143) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: September 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? No Multiple heat exchanger design provides redundancy and allows service/maintenance without interrupting system operation. Less motorized/movable components ensure reduced wear & tear and lower service/maintenance costs over the life of the boiler. THIS PRODUCT IS: Energy Efficient Designed as an extension of the primary heating system, the Vitotrans 300 merely requires a 30% increase of a building s overall BTU requirements to cover all DHW heating needs. 1. Increased Sustainability Energy savings realized by eliminating the need for a dedicated boiler for DHW production. 2. Decreased Cost of Installation No need to install batteries of DHW storage tanks. No need for gas piping or wall venting penetrations.
3. Ease of Installation Compact size of fully-assembled unit reduces required floor space. Easy access to all componentry and no gas piping or wall vent requirements allow for stress free installation. 4. Maximum Life Expectancy As a result of its burnerless design, sediment buildup and thermal stress are reduced, ensuring minimal maintenance and prolonged service life. 5. Flexibility Accommodates a wide range of system applications and flow rates (5 90 gpm).