Please Read This Manual Inside you will find many helpful hints on how to use & maintain your washing machine properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washing machine. Carrier Midea India Pvt. Ltd. 1st Floor, Pearl Tower, Plot No. 51, Institutional Area, Sector-32, Gurgaon - 122 001, (Haryana) Ph.: - 0124 6144300 Helpline: 1800 3000 00 11 www.facebook.com/mideaindia Linkedin: Carrier Midea India mideacare@caremidea.com *Product colour and image may vary from the actual product. MWMTL075ZOF MWMTL065ZOF Before using your washing machine, please read this manual carefully and keep it for future reference.
Dear Customer, Welcome to the Midea family! We thank you for your patronage and invite you as a member of our sizable global fraternity. Midea, being one of the world's largest manufacturers of Air-Conditioners and Home Appliances with a presence in over 190 countries, confidently delivers to you world class product solutions. Midea was founded on the values of trust and assurance and all our products and services reflect that ideology. It's our contest endeavour to facilitate your access to information, products and services as well as to make sure that any and all of your queries or grievances get resolved satisfactorily. You can register your service request at our Toll Free number 1800-3000-0011 or email us at mideacare@carriermidea.com. Please include the unique 'customer relationship number' that has been allotted to your query in the subject line to me. Feedback from our valued customers always helps us to improve. Do write to us with suggestions about our product and services. I would be happy to receive them by mail. We sincerely hope that you enjoy the style and comfort that comes along with owning a Midea product. I look forward to build a relationship with you on the tenets of trust and quality. Best Regards! Sanjay Mahajan Vice President - Sales and Marketing Carrier Midea India Pvt. Ltd. 1
Table of Contents Check on receiving... 03 Key Features... 04 Know your Washing Machine... 05 Accessories... 05 User Interface Panel... 06 Safety & Precautions... 10 Installation... 13 Steps before washing... 15 Smart Touch Explanation... 16 Wash programs & Special Features... 18 Cleaning & Maintenance... 20 Troubleshooting... 21 Technical Specifications... 23 E-Waste Management Guidelines... 24 Warranty Terms & Conditions... 26 Memo... 28 Warranty Card... 29 Check on Receiving On receiving your Midea Washing Machine Midea adopts a stringent policy to ensure safe delivery of all it's products. All product shipments are thoroughly checked, packed and quality certified before leaving our manufacturing. Please don't accept any product if there is any visible loss or damage of the goods and ask the delivery person to make the note on the freight bill or receipt. On Opening the box When a shipment has been delivered to you in apparent good conditions, but upon opening the box, if there is any loss or damage that has taken place due to transit, please inform the Midea Service Centre immediately. About your instruction/usage manual This manual is a guide to good usage and operating instructions for your new Midea Washing Machine. This manual does not contain all product service related procedures required for continued successful operation of this product. The services of Midea Authorized Service Person must be employed on periodical basis for the same. Do not operate the product before reading the manual supplied with this product and follow instructions to ensure personal safety and proper operation. Carrier Midea India Limited assumes no liability for installation performed by any unauthorized Person. Always install, operate, inspect and maintain this product in accordance with all applicable standards. Please store this user manual carefully for any future reference. 2 3
Key Features Know your Washing Machine Water inlet valve SMART TOUCH Midea's Smart Touch allows to handle your entire wash process with the touch of a button, saving your precious time and energy to spend doing the things you love. Using advanced algorithms, it calculates and automatically determines the water level, wash program, number of rinses and spin duration. Thus without Smart Touch no washing machine is a real fully automatic. HEXA FRILL WASH The power of six wave fronts in one rotation of pulsator, Midea's unique Hexa Frill Wash helps you to get the best wash results whatever the dirt level is and that too at the minimum water consumption. Split door Control panel Cabinet Adjustable foot knob POINT ZERO PRESSURE Midea's top loads are equipped with Point Zero Pressure which helps you to operate the washing machine even at a very low water pressure. Thus no need to wait for high pressure; washing can be done at any time of the day. Inlet pipe Rat protection cover User Manual Screw Spring clamper Drain pipe Note: If the drain pipe is already installed on the washing machine, then there is no spring clamper & drain pipe in the accessories. 4 5
User Interface Panel Start/Pause (Smart Touch) (Start / Pause) perform both the functions of start & pause. If this button is pressed directly when power is on, Smart Touch feature is activated. Power Power button performs the function to Turn Off and Turn On the Washing Machine. Program Selection Before starting, continuosly press this button for switching over among (Standard), (Deep clean), (Fast clean), (Delicate), (Heavy load), (Active), (Tub clean), (Drum dry) & (Water Level) keys together. 7.5 MWMTL075ZOF SMART TOUCH um Child Lock Press (Program) and (Water Level) together to activate the child lock. Now only the (on/off) key is working. To disable the Child Lock, again press (Program) and (Water Level) keys together. Note : Other process combinations are just like above. Water Level Eight water levels are set for this washing machine from 1 and 2 at the lowest level to 7 and 8 at the highest level. Function This key helps to select the various wash process such as soak, wash, rinse & spin. Physically challenged mode The Start / Pause & On / Off is also written in braille language to assist the operation for visually impaired person. 6 7
Safety and Precautions Observe the following signs in order to prevent any injury and damage to property: Please do not install the machine in damp & rainy environment to avoid electric shocks, fire, faults & distortion accidents. Please do not directly rinse the machine with water while cleaning. This graphic represents (pay attention) and detailed cautions will be displayed inside the graphic. This graphic represents (operation prohibited), and detailed prohibitive items will be displayed inside the graphic. Please do not let children climb the machine or peep into the rotating spin tub to avoid accidents. It is prohibited to wash the clothes stained with kerosene, gasoline, alcohol & other flammable materials. This graphic represents (forcible execution), & detailed forcible execution items will be displayed inside the graphic. Please do not damage power flexible cord & power plug to avoid electric shocks, short circuit and fire. Regularly clean the power plug to remove dust & dirt to avoid contact failure. Note : This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of knowledge, unless experienced and they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Please do not disassemble and assemble the machine on your own. Please do not insert your hand & take out clothes from inside the spin tub before it is fully stopped. Please pull out plug from the socket if the machine is not in use. Make sure the earthing line of socket is connected to earth to prevent any electric shock or accident caused by leakage of current. ( ) 10 11
MWMTL065ZOF* MWMTL075ZOF* 6.5 MWMTL065ZOF 7.5 MWMTL075ZOF SMART TOUCH SMART TOUCH um SMART TOUCH um *Note : For Key Layout explanation, please refer to page 6 & 7. 8 9
Please insert the power plug tightly. Please do not place burning candle, mosquito-repellent, incense, cigarette & other flammable things, e lectric stove, air heating fan & other heating sources on the lid of washing machine. Please use correct power source. Please don t pull out or insert the plug with wet hands to avoid electric shock. Installation 1. Remove package 3. Placement of water drain pipe Remove package and take out the bottom board of the cabinet on the foam cover. Open the lid of washer s door and take out the accessories. A trial operation or washing on the foamed cushion is strictly forbidden. If the water drain pipe needs to be extended, its length shall not exceed 3 meters, 2. Installation of drain pipe otherwise it will affect the water discharging time. Please ensure that the water inlet pipe is connected and the tap is opened before washing clothes. The water temperature o shall not exceed 50 C, when washing with warm water. Users are not adviced to change the plug on their own. If required please contact Midea Service Centre. Completely sleeve the drain pipe over the outlet. Fix and tighten it with a spring clamper that comes with the washing machine. (As shown in the figure) The placed height of water drain pipe shall not exceed 15cm. Please do not pull the electric cord while taking out the power plug. Please do not wash raincoat, fishing coat & water proof clothes in the washing machine. Do not bend the water drain pipe and place it under the base of washing machine. 12 Note : Make sure that the installation is done by CMI trained installation engineers only. Please call Midea Service Centre for any enquiry. 13
Installation Steps before Washing Adjust the adjustable foot to make the washing machine stable. Connection of inlet pipe, tap and washing machine Loosen 4 bolts thread Loosen clamp nut thread Tighten Clamp Press slide bushing insert inlet pipe into, connecting base Front Ater connection & installation, check if there is water leakage Note: Make sure that the installation is done by CMI trained installation engineers only. Please call Midea Service Centre for any enquiry. 14 Soft Fabrics Set connecting base on tap & tighten bolts evenly Adjustable foot (extends when clockwise rotating & shorten when counterclockwise rotating) (Slightly incline the washing machine first & loosen the adjustable foot knob. Adjust the adjustable foot so as to ensure four corners of washing machine be steadily in contact with the ground. Then tighten the adjustable foot knob and lock it. If the ground is not flat, correction should be made on the ground surface, otherwise the washer tub will incline and knock the cabinet) Connect with power source. Turn on the water supply. Put down the drain pipe. Install the water Inlet pipe. Connection Finished Installing the Rat Protection Cover 1 Lay down the washing machine on a soft fabric or cushion. 2 Insert the anti rat protection cover to be firmly fixed from the back or front of washing machine & fix it with screw. Put in clothes and suitable amount of washing powder. Before washing, please do take out coins, keys and other pointed objects from the pockets and zip up clothes tightly to prevent them and wash tub from damage. 15
Smart Touch Explanation Personalized Washing Program User can select washing program and water level according to their own need. Press the [Start/ Pause] key Install the Washing Machine Select the appropriate Water Level Load the Clothes Select the desired Program Smart Touch Function key can be pressed several times depending on the need of introducing wash, rinse, spin or soak process, you wish to select. Alternatively, user can use Smart touch function which simplifies the washing process. Measure out the detergent Plug the Power Supply Smart Wash Put down the Drain Pipe Close the Machine door Turn on the Water Tap Using advanced algorithms, it calculates and automatically determines the water level, wash program, number of rinses, and spin duration. 16 17
Wash Programs & Special Features Wash Programs & Special Features Note: Close the lid of the door when machine is running, otherwise it will automatically stop working during spin process and send out abnormal warnings. The washing machine will not work till the time, filled water does not reach the set water level. The selection of rinse water level: the level is equal to wash water level. STANDARD This wash program is suitable for almost all types of clothes with appropriate wash, rinse & spin time. Press (Rinse Level) button, the indicator light which stands for rinse level. User can select the rinse water level according to needs. Rinse level exceeds that water level all the time. It shows the wash level if not, press this button. Only show rinse level when rinse. After pressing (ON/OFF Switch ), if the (Start/ Pause ) button is not pressed, the power will be automatically cut off after 10 minutes. HEAVY LOAD Suitable for heavier clothes with strong washing ability. Detailed explanation of washing program Contents Program Standard Deep clean Fast clean Wash Time Spin Time Complete Time Rinsing Time Note: The time required will also vary with water pressures of inlet pipe, different clothes textures and different water drain conditions. Delicate DEEP CLEAN Suitable for the heavily soiled clothes with larger wash time. ACTIVE Suitable for lesser clothes with less dirt degree. Heavy load Active Tub clean FAST CLEAN It s used for washing the clothes which are not so dirty and the whole washing process uses shorter wash time. TUB CLEAN This program is useful to clean the wash tub thoroughly with high RPM water sprayed for 1 min. Drum dry DELICATE Suitable for delicate clothes like wool, silk, etc. It uses higher water levels and no spin cycle to safeguard any damage on clothes due to higher rotation of tub. DRUM DRY* Drum Dry program is a special program of this washing machine. The spin tub circulates in a high speed to make the outside of the tub dry. This helps in controlling the bacterial growth making the washing healthier. *Note: This program is used for drying the tub. Do not put clothes inside the tub. 18 19
Cleaning and Maintenance End of program The washing machine will send buzzer sound at the end of every program operation to remind you to take out the clothes or operate it again. After the sound, washing machine returns to its power-off state with no display and all lights off. Please turn off the tap, pull out the plug when not in use to avoid water leakage or any accidents. Clean the water inlet After long time usage, the water inlet mesh bag may be blocked with mud or sand, and should be cleaned according to the following steps: 1. Switch on the power, followed by turning off the tap. 2. Let the washing machine work for 5 seconds so that water flows into the tub through the water inlet pipe, then turn off the power. 3. Unload the water inlet pipe and clean the mesh bag. Clean the magic filter After using the washing machine for a period, please clean it according to the following steps: 1. Take out the magic filter. 2. Open the filter and wash it with water 3. Restore and fix it. Maintenance Use gentle clothing to wipe off the water and dirt from the surface each time after using the washing machine. Detergent, propellant and other chemicals are not allowed to be used so as to avoid any damage to the plastic parts. Troubleshooting When the washing machine is in trouble, please contact CMI service centre or call Midea toll free number. No water flows in No Washing Abnormal Draining If the power is off or the fuse is burned out. If the water supply is cut off or the water pressure is too low. If the inlet pipe is properly connected and the water tap is opened. If the filtering screen of inlet valve is blocked by dirt. If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal phenomenon when the inlet valve is switched on) If the "Start / Pause" button is pressed after the power switch is pressed. If the power is off or the fuse is burned out. If the power supply voltage is too low. If the water amount reaches to the required water level. (The washing machine will not work if the water amount does not reach the required water level) If the water drain pipe is placed very high. If the internal rubber ring of drain valve is blocked by dirt. Abnormal Spin If the door lid is closed. If all clothing piled largely at one side of tub or the clothing is excessively placed. If the washing machine is not placed in stable condition or it is placed in inclination state. (The ground is not flat). If the motor belt is loose. Note : During the spin process, if washing is piled at one side of the spin tub, it will cause unbalance of spin tub resulting in striking. At this moment, the computer inside the washing machine will feel this unbalance phenomenon and will automatically correct it ( fill in water Washing ). However, if unbalance situation is not removed after three continuous corrections, which means the computer auto- correction can not resolve the problem. Then the user has to manually and evenly place the clothing inside the tub to solve the problem. 20 21
Troubleshooting Technical Specifications When the washing machine is in trouble, please contact local service office or the sales service department of our company and the customer should not dismantle the machine without permission. Model MWMTL065ZOF MWMTL075ZOF If the washing machine can not work normally, and the abnormal indication is shown in the user interface, please check and correct as follows: Rated power supply Input power of motor 220-240 v - 50 Hz 400W 220-240 v - 50 Hz 450W Fault Cause of fault Indication Alarm for water inlet Alarm for opening lid Water injection for about 16 minutes, but do not reach preset water level Open the lid when the washer is spinning. The lights of standard, deep clean and soak will flare. The lights of fast clean, delicate and wash will flare. Alarm of the buzzing sound The buzzer goes on buzzing for 6 seconds. If the fault is not solved, buzzes again for 6 seconds in every 16 minutes. Stopping Alarm Open the lid to deal with faults, then close the lid to stop the alarm. Rated washing capacity Rated spin capacity Overall dimensions (W x D x H)mm *Applicable water pressure Weight Note : *Tested in laboratory conditions. 6.5 Kg 6.5 Kg 515x525x900(mm) 0.1 MPa - 0.6 MPa 29 Kg 7.5 Kg 7.5 Kg 550x564x910(mm) 0.1 MPa - 0.6 MPa 30Kg Imbalance alarm Checked imbalance for the third time. The lights of heavy load, active and rinse will flare. Drain alarm After draining for 4 minutes, does not finish draining. The lights of tub clean, air dry and spin will flare. 22 23
E-waste Management Guidelines E-waste Management Guidelines PERTAINING TO THE E-WASTE RULES Proper Handling and / or Recycling of the Washing Machines Under the E-Waste (Management & Handling) Rules, 2011 (hereafter referred to as the "E-Waste Rules"), it is incumbent for all consumers, including the purchaser of this washing machines, to properly recycle and dispose of all electrical and electronic equipment through authorized recyclers. E-Waste has been defined as "waste electrical and electronic equipment, whole or in part or rejects from their manufacturing and repair process, which are intended to be discarded". E-Waste contains various hazardous materials like lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominateddiphenyls ethers. Hence, improper handling and disposal of e-waste releases these hazardous material in the environment causing pollution, contamination of soil and water and various health hazards. Through, the product purchased by you is ROHS compliant & does not contain any hazardous material above the prescribed limit under the E-Waste Rules, it is imperative that the product should be handled with utmost caution and as per the guidelines mentioned in this manual including the following Do's and Don'ts : - Hand over the E-Waste to the Company / Authorised recycles. E-Waste should never be thrown in household bins. Keep the product in isolated area, after it becomes non-functional/un-repairable so as to prevent its accidental breakage. The product should not be opened by the User himself/herself, but only by authorised service personnel. Never sell the e-waste to any unauthorized agencies, scrap dealer/kabadiwalahs. Never throw E-Waste in bins as part of household waste. Never keep E-Waste in open and exposed area, accessible by all. Never open/dismantle any e-waste on your own. The following marking/symbol on the product or carton indicates that the product and its accessories/parts (e.g. remote controller, batteries, spare parts etc.) should not be disposed off with other household waste at the end of their working life. Please separate these items from other types of waste and recycle them responsibly for conservation of the environment and collective well-being. E-Waste Recycling Program We have tied up with government approved e-waste recycles for facilitating the collection of e-waste from our channel partners and customers for recycling. You are simply required to call our toll free number 1800 30 00 00 11 and register your request for collection of e-waste. Once your request is received, the representatives of the authorized recycles would collect the e-waste from your house/psemises after paying the value of the same to you. For more details and information on our E- Waste Recycling Program kindly visit our website. 24 25
Product & Warranty Terms & Conditions CARRIER MIDEA INDIA PRIVATE LIMITED (hereinafter referred to as the "Company"), incurred in connection with the visit of the service personnel, technicians etc., shall hereby warrants to the original domestic purchaser (here in after called the "Purchaser") of be borne by the Purchaser and shall be payable in advance. Additionally, all the product (as detailed within the Warranty Registration Card and here in after referred to expenses incurred by the authorized representative/dealer in collecting the unit as the "said unit") that the said unit is free from defects in materials and workmanship under or any part thereof from such outstation locations and its return to the original normal use and service and under specified voltage conditions, and that during a period of location shall be borne exclusively by the Purchaser. twenty four (24) months commencing from the date of invoice, as provided in the Warranty Registration Card, the Company undertakes to repair or to replace as it deems fit in sole 7. Any damage/fault caused due to sabotage, improper handling or treatment, discretion, free of charge, any part or parts of the said unit (including accessories) which carelessness, accident, fire, flood, earthquake or any act of God, or any corrosive proves to be defective in materials or workmanship. action on the original fittings, valves etc. for whatever reason, shall not be covered under this warranty. CONDITIONS OF WARRANTY 1. The warranty shall be valid and that the Purchaser can have the benefit of this warranty, 8. While the Authorized Dealers/Company will make every effort to carry out if and only if the Purchaser has duly intimated the fault to the Company or its authorized repairs/replacement of parts under this warranty as soon as the complaint is dealer and that the unit is in the possession of and is used by the Purchaser. received, it is expressly made clear that the Authorized Dealer/Company shall not be liable to do so within any specified period of time. 2. The Warranty will shall be valid only for the said period as specified above, irrespective of whether the said unit has been in use or not for any reason whatsoever, or the unit is 9. It shall be absolute discretion of the Company to (a) effect the repairs or moved from one location to another. The warranty period specified above shall include replacement of parts whether at the site of installation or at any service center; and time taken for repairs, replacements, testing of unit, technical breakdowns, transit time (b) have the job attended to either by the Company's service personnel or of its etc. This warranty shall automatically expire by efflux of time on completion of the authorized dealers. (c) This warranty shall be strictly limited to the repairs or period indicated herein above and no notice of such expiry will be given by the replacement of defective parts specified in the warranty. This warranty shall not Company. cover any consequential of resulting liability. (d) This warranty shall not, in any case, extend towards payments of an monetary consideration whatsoever 3. This warranty shall stand automatically terminated in the event of the said unit being ofreplacement or return of the product. (e) The company may repair/ supply parts serviced, repaired, installed, de-installed, re-installed or otherwise attended to by and free of cost during the warranty period. This warranty does not cover any Excise person or organization or agency or by the Purchaser himself (by whatever name Duty, Central or Sales Tax, Octroi and other local taxes or levies on the called), other that the authorized representative / Dealer of the Company. components/parts. (f) The parts shall be replaced by functionally operating equivalent material only and not necessarily brand new ones and are to be 4. Extended Wash Motor Warranty (Applicable on select Model : Please check with different from the one originally fitted. The parts thus removed shall be taken back Company Customer Care to confirm applicability of the special motor warranty) For by the company. (g) The company reserves the right to retain any part or select models, or as a special time-bound activity, the company may extend the components replaced at its sole discretion during the warranty period. warranty on wash motor for a specified period following the expiration of the entire unit warranty. The Company shall continue to warrant the wash motor to be free from 10. This warranty is in the nature of and for the purposes as set forth herein above and defects in material and workmanship under normal use and service and under in particular, the Company shall not in any event be liable for any direct, indirect, specified voltage conditions. This warranty covers only the wash motor. During the incidental or consequential loss or damages to either the said purchaser and/or additional warranty period, it does not cover any part such as overload protector, relay, his property or any other third party in course of attending to any complaint. electronics etc. Standard visiting charges will be applicable within the municipal limit of town where company has an Authorized Service Centre, Service outside municipal limit will attract to and fro traveling, other incidental expenses in addition to standard visiting charges, as prevailing from time to time. During the warranty period, only the parts replaced or repaired shall be free of costs, but service charges shall always be payable by the customer. Expendable items are excluded from this warranty and are on chargeable basis. This warranty is subject to use of product with input voltage of 230 V 11. Limitation of Warranty: Company shall not be responsible for providing any warranty under the following situations: i. If the appliance is not used in accordance with manufacturer's instruction given in the User's Manual. +/-10%. We recommend use of approved make of voltage protection devices. The ii. Service engineers visits to place of product installation to teach/instruct on how terms and conditions as set out below shall form the basis of this warranty: to use the product 5. Parts of the units replaced or repaired under the terms of this warranty are warranted only for the remaining period of the original warranty period. 6. For attending any service call under this warranty beyond the Municipal limits of the locality in which the authorized representative/dealer is situated (outstation locations), all to and fro traveling and other incidental expenses as prevailing from time to time iii. Noise or vibration that is considered normal for product operations like warning beeps, water drain sound, spin sound etc. iv. Correcting the installation, for example leveling the product, adjustment of inlet tap/drain hose etc v. Normal maintenance which is recommended by the user's manual vi. Removal of foreign objects / substances from the machine, including the pump and inlet hose filter for example grit, nails, buttons etc. vii. Replace fuses in or correct house wiring or correct house plumbing viii. If the product is used for commercial purpose, it is not warranted (example : Public places such as public bathroom, lodging house, dormitory etc) ix. Any damage caused by accident, mishandling, tampering with installation, or negligent in following instructions of the user manual issued by the Company. If the products has been installed/serviced / repaired/ opened or tampered by any unauthorized personnel. x. Any damage caused by power surges and dips, improper electrical circuit outside the unit or by any defective electrical supply. If defects arise/caused by accidents, alteration, misuse, substitution of original components with spurious/non-genuine components attacked by household pest/ rodent, fire, flood, earthquake, lighting and/or any other xiv. If sea water or any substandard detergent has been used in the appliance. xv. The product is shifted outside India xvi. Damage to the product due to operation in an abnormally corrosive alkaline / acidic atmosphere. Product/Parts is found defective if the product is installed/operated in abnormally corrosive alkaline / acidic atmosphere or near muddy sewages because toxic gases are harmful for the product. xvii. This warranty does not cover any type of painting, plating including rusting etc., or defects thereof act of God/ natural calamities. 12. None of the employees and/or Authorized dealers of the Company have the authority xi. At any time, during the currency of the warranty period, if any part of the unit is whatsoever to vary the terms and conditions of this warranty. tampered with, altered, repaired or serviced by any unauthorized person, not being the authorized representative of the Company or its authorized dealers. xii. If defects arising with optional accessories like trolleys, rat mesh, machine cover, online filter, inlet/ exhaust extension hoses, tap adapter, extended power supply cable, adjustment feet cover, etc. thereof xiii. The serial number on the unit or any part thereof is damaged, defaced, altered, obliterated, or tampered with or removed for any reason whatsoever. THIS WARRANTY IS NOT TRANSFERABLE AND APPLIES TO ORIGINAL PURCHASER ONLY. COMPLETE THIS RECORD AND KEEP IT TOGETHER WITH YOUR PURCHASE DOCKET IN A SAFE PLACE YOU WILL HAVE TO PRODUCE. SHOULD YOU REQUIRE SERVICE UNDER THE TERMS OF THIS WARRANTY, PLEASE CONTACT US. xviii. Plastic & Glass parts such as Door, Lid Assembly, Control Panel, Window, Knobs, Escutcheon Cabinet, Dispenser Assembly, Drain Pipe, Lint Filter, Wheels/Foot etc. are also not covered in warranty. 13. This warranty shall be deemed to have been issued at Gurgaon in the State of Haryana, and Courts at Gurgaon shall have exclusive jurisdiction on matters covered by or following from this warranty, and the Purchaser alone shall have cause of action arising out of the transaction. 26 27
Memo 28 29