34 40 44 46 53 57 72 76 79
NEWS The Monthly Technology and Standards 2
_3
NEWS The Monthly Technology and Standards 4
_5
NEWS The Monthly Technology and Standards 6
_7
8
_9
10
_11
12
_13
14
_15
16
_17
18
_19
20
_21
22
The Monthly Technology & Standards _23
24
_25
26
_27
28
é _29
30
_31
32
_33
34
_35
36
_37
38
_39
40
_41
42
_43
44
_45
46
_47
48
_49
50
_51
52
_53
54
_55
56
_57
58
_59
60
_61
62
_63
64
_65
66
_67
68
_69
70
_71
72
_73
74
_75
76
_77
78
_79
80
_81
IULTCS ISO/DIS 17234 Leather- Chemical tests- Determination of certain azo colourants in dyed leathers (Revision of ISO/TC 17234:2003) ISO/DIS 26081.2 Leather- Physical and mechanical test- Determination of soiling for domestic and contract upholstery leather TC 1 ISO/DIS 5408 Screw threads- Vocabulary (Revision of ISO 5408:1983) TC 8 ISO/DIS 25862 Ships and marine technology- Marine magnetic compasses, azimuth reading devices and binnacles for steering ISO/DIS 30000 Ships and marine technology- Ship recycling management systems- Specifications for management systems for safe and environmentally sound ship recycling facilities (Revision of ISO/PAS 30000:2008) TC 12 ISO/DIS 80000-1 Quantities and units- Part 1: General (Revision of ISO 31-0:1992, ISO 31-0:1992/Amd 1:1998, ISO 31-0:1992/Amd 2:2005) TC 22 ISO/DIS 26866 Road vehicles- Brake lining friction materials- Standard wear test procedure for commercial vehicles with air brakes TC 23 ISO/DIS 6814 Machinery for forestry- Mobile and self-propelled machinery- Terms, definitions and classification(revision of ISO 6814:2000) ISO/DIS 11783-6 Tractors and machinery for agriculture and forestry- Serial control and communications data network- Part 6: Virtual terminal (Revision of ISO 11783-6:2004) ISO/DIS 13772 Forestry machinery- Portable chain-saws- Non-manually actuated chain brake performance (Revision of ISO 13772:2004) ISO/DIS 26322-2 Tractors for agriculture and forestry- Safety- Part 2: Narrow-track and small tractors TC 24 ISO/DIS 9277 Determination of the specific surface area of solids by gas adsorption- BET method (Revision of ISO 9277:1995) TC 28 ISO/DIS 11158 Lubricants, industrial oils and related products (class L)- Family H (hydraulic systems)- Specifications for categories HH, HL, HM, HV and HG (Revision of ISO 11158:1997) TC 34 ISO/DIS 660 Animal and vegetable fats and oils- Determination of acid value and acidity (Revision of ISO 660:1996, ISO 660:1996/Amd 1:2003) ISO/DIS 22006 Quality management systems- Guidelines for the application of ISO 9001:2000 in crop production ISO/DIS 24333.2 Cereals and cereal products- Sampling ISO/DIS 26323 Milk products- Determination of the acidification activity of dairy cultures by continuous ph measurement (CpH) ISO/DIS 30024 Animal feeding stuffs- Determination of phytase activity TC 37 ISO/DIS 30042.2 Terminology and other language and content resources- Computer application 82
in terminology- TermBase exchange format specification (TBX) TC 38 ISO 15487:1999/ Textiles- Method for assessing appearance of apparel and other textile end DAmd 1 products after domestic washing and drying- Amendment 1 TC 39 ISO/DIS 19719.2 Machine tools- Work holding chucks- Vocabulary TC 42 ISO/DIS 3664 Graphic technology and photography- Viewing conditions (Revision of ISO 3664:2000) ISO/DIS 18939 Imaging materials- Digital hard copy for medical imaging- Methods for measuring permanence TC 44 ISO/DIS 6947 Welds- Working positions- Definitions of angles of slope and rotation (Revision of ISO 6947:1990) ISO/DIS 11666 Non-destructive testing of welds- Ultrasonic testing of welded joints- Acceptance levels ISO/DIS 17635 Non-destructive testing of welds- General rules for metallic materials (Revision of ISO 17635:2003) ISO/DIS 17640 Non-destructive testing of welds- Ultrasonic testing of welded joints- Methods and testing levels (Revision of ISO 17640:2005) ISO/DIS 23279 Non-destructive testing of welds- Ultrasonic testing- Characterization of indication in welds (Revision of ISO 23279:2007) TC 45 ISO/IDS 1658.2 Natural rubber (NR)- Evaluation procedure (Revision of ISO 1658:2994) ISO 3386-1:1986/ Polymeric materials, cellular flexible- Determination of stress-strain DAmd 1 characteristics in compression- Part 1: Low-density materials- Amendment 1 ISO 3386-2:1997/ Polymeric materials, cellular flexible- Determination of stress-strain DAmd 1 characteristics in compression- Part 2: High-density materials- Amendment 1 ISO/DIS 4662 Rubber- Determination of rebound resilience of vulcanizates (Revision of ISO 4662:1986) ISO 6502:1999/DAmd 1 Rubber- Guide to the use of curemeters- Amendment 1: Precision ISO/DIS 25518.2 Rubber gloves for general household use- Specification TC 54 ISO/DIS 14715 Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.L.] (Revision of ISO 14715:1999) TC 61 ISO/DIS 27547-1 Plastics- Preparation of test specimens of thermoplastic materials using mouldless technologies- Part 1: General principles, and laser sintering of specimens TC 67 ISO/DIS 17078-4 Petroleum and natural gas industries- Drilling and production equipment- Part 4: Practices for side-pocket mandrels and related equipment TC 98 ISO/DIS 13824 General principles on risk assessment of systems involving structures TC 110 ISO/DIS 3691-1.3 Industrial trucks- Safety requirements and verification- Part 1: Self-propelled industrial trucks, other than driverless, variable-reach trucks and burden-carrier trucks (Revision of ISO 3691:1980) TC 135 ISO/DIS 12706 Non-destructive testing- Vocabulary of terms used in penetrant testing (Revision of ISO 12706:2000) TC 138 ISO/DIS 8779 Plastics piping systems- Polyethylene (PE) pipes for irrigation- Specifications (Revision of ISO 8779:2001) _83
ISO/DIS 25780 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin- Pipes with flexible joints intended to be installed using jacking techniques TC 158 ISO/DIS 6145-9 Gas analysis- Preparation of calibration gas mixtures using dynamic volumetric methods- Part 9: Saturation method (Revision of ISO 6145-9:2001, ISO 6145-9:2001/Cor:2002) TC 160 ISO/DIS 28278-1 Glass in building- Glass products for structural sealant glazing- Part 1: Supported and unsupported monolithic and multiple glazing TC 164 ISO/DIS 16630 Metallic materials- Method of hole expanding test (Revision of ISO/TS 16630:2003) TC 165 ISO/DIS 15206 Timber poles- Test methods- Determination of structural properties TC 172 ISO/DIS 10936-2 Optics and photonics- Operation microscopes- Part 2: Light hazard from operation microscopes used in ocular srugery (Revision of ISO 10936-2:2001) ISO/DIS 10940 Ophthalmic instruments- Fundus cameras(revision of ISO 10940:1998) ISO/DIS 11553-3 Safety of machinery- Laser processing machines- Part 3: Safety requirements for noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) TC 181 ISO/DIS 8124-4.2 Safety of toys- Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use TC 182 ISO/DIS 22282-6 Geotechnical investigation and testing- Geohydraulic testing- Part 6: Water permeability tests in a borehole with packer and pulse-litre stimulation TC 184 ISO/DIS 13584-42 Industrial automation systems and integration- Parts library- Part 42: Description methodology: Methodology for structuring part families (Revision of ISO 13584-42:1998, ISO 13584-42:1998/Cor 1:2003) TC 197 ISO/DIS 15869.3 Gaseous hydrogen and hydrogen blends- Land vehicle fuel tanks TC 210 ISO/DIS 15225 Nomenclature- Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (Revision of ISO 15225:2000, ISO 15225:2000/Amd 1:2004) TC 213 ISO/DIS 3611 Geometrical product specification (GPS)- Dimensional measuring instruments- Micrometers for external measurements; Design and metrological characteristics(revision of ISO 3611:1978) TC 215 ISO/DIS 12967-1 Health informatics- Service Architecture- Part 1: Enterprise viewpoint ISO/DIS 12967-2 Health informatics- Service Architecture- Part 2: Information viewpoint ISO/DIS 12967-3 Health informatics- Service Architecture- Part 3: Computational viewpoint TC 227 ISO/DIS 26909 Springs- Terminology and classification of terms(revision of 2162-3:1993) TC 228 ISO/DIS 11107 Recreational diving services- Requirements for enriched air nitrox training programmes ISO/DIS 11121 Recreational diving services- Requirements for introductory scuba experience programmes 84
TC 23 ISO/FDIS 9644 Agricultural irrigation equipment- Pressure losses in irrigation valves- Test method (Revision of ISO 9644:1993, ISO 9644:1993/Amd 1:1998) ISO/FDIS 12003-1 Agricultural and forestry tractors- Roll-over protective structures on narrowtrack wheeled tractors- Part 1: Front-mounted ROPS (Revision of ISO 12003-1:2002) ISO/FDIS 12003-2 Agricultural and forestry tractors- Roll-over protective structures on narrowtrack wheeled tractors- Part 2: Rear-mounted FOPS (Revision of ISO 12003-2:2002) TC 27 ISO/FDIS 540.2 Hard coal and coke- Determination of ash fusibility(revision of ISO 540:1995) TC 34 ISO/FDIS 734-2 Oilseed meals- Determination of oil content- Part 2: Rapid extraction method (Revision of ISO 734-2:1998) ISO/FDIS 6668 Green coffee- Preparation of samples for use in sensory analysis (Revision of ISO 6668:1991, ISO 6668:1991/Cor 1: 2000) ISO/FDIS 21527-1 Microbiology of food and animal feeding stuffs- Horizontal method for the enumeration of yeasts and moulds- Part 1: Colony count technique in products with water activity greater than 0,95 (Revision of ISO 7698:1990, ISO 7954:1987, ISO 13681:1995) ISO/FDIS 21527-2 Microbiology of food and animal feeding stuffs- Horizontal method for the enumeration of yeasts and moulds- Part 2: Colony count technique in products with water activity less than or equal to 0,95 (Revision of ISO 7698:1990, ISO 7954:1987, ISO 13681:1995) TC 39 ISO/FDIS 8525 Airborne noise emitted by machine tools- Operating conditions for metalcutting machines TC 44 ISO 24304:2005/ Welding consumables- Solid wires and rods for fusion welding of titanium and FDAmd 1 titanium alloys- Classification- Amendment :. TC 61 ISO/FDIS 11357-6 Plastics- Differential scanning calorimetry (DSC)- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (Revision of ISO 11357-6:2002) ISO/FDIS 15106-4 Plastics- Film and sheeting- Determination of water vapour transmission rate- Part 4: Gas-chromatographic detection sensor method TC 67 ISO/FDIS 10426-6 Petroleum and natural gas industries- Cements and materials for well cementing- Part 6: Methods for determining the static gel strength of cement formulations ISO/FDIS 28300 Petroleum, petrochemical and natural gas industries- Venting of atmospheric and low-pressure storage tanks TC 92 ISO/FDIS 5660-4 Reaction-to-fire test- Heat release, smoke production and mass loss rate- Part 4: Measurement of heat release for determination of low level of combustibility TC 98 ISO/FDIS 13823 General principles on the design of structures for durability TC 100 ISO/FDIS 10190 Motorcycle chains- Characteristics and test methods (Revision of ISO 10190:1992) TC 106 ISO 3823-2:2003/FDAmd 1 Dentistry- Rotary bur instruments- Part 2: Finishing burs- Amendment 1 ISO/FDIS 11143 Dentistry- Amalgam separators (Revision of ISO 11143:1999, ISO _85
11143:1999/Cor 1:2002) TC 110 ISO/FDIS 22915-10 Industrial trucks- Verification of stability- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (Revision of ISO 10658:1996) ISO/FDIS 22915-20 Industrial trucks- Verification of stability- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization ISO/FDIS 22915-8 Industrial trucks- Verification of stability- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated (Revision of ISO 5767:1992, ISO 5767:1992/Amd 1:1999) TC 119 ISO/FDIS 4490 Metallic powders- Determination of flow time by means of a calibrated funnel (Hall flowmeter) (Revision of ISO 4490:2001) TC 121 ISO/FDIS 9170-1 Terminal units for medical gas pipeline systems- Part 1: Terminal units for use with compressed medical gases and vacuum (Revision of ISO 9170-1:1999) ISO/FDIS 15002 Flow-metering devices for connection to terminal units of medical gas pipeline systems (Revision of ISO 15002:2000) TC 127 ISO/FDIS 16754 Earth-moving machinery- Determination of average ground contact pressure for crawler machines TC 130 ISO/FDIS 15930-8 Graphic technology- Prepress digital data exchange using PDF- Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5) TC 131 ISO/FDIS 16889 Hydraulic fluid power- Filters- Multi-pass method for evaluating filtration performance of a filter element (Revision of ISO 16889:1999) ISO/FDIS 21003-1 Multilayer piping systems for hot and cold water installations inside buildings- Part 1: General ISO/FDIS 21003-2 Multilayer piping systems for hot and cold water installations inside buildings- Part 2: Pipes ISO/FDIS 21003-3 Multilayer piping systems for hot and cold water installations inside buildings- Part 3: Fittings ISO/FDIS 21003-5 Multilayer piping systems for hot and cold water installations inside buildings- Part 5: Fitness for purpose of the system TC 150 ISO/FDIS 13779-1 Implants for surgery- Hydroxyapatite- Part 1: Ceramic hydroxyapatite (Revision of ISO 13779-1:2000) ISO/FDIS 13779-2 Implants for surgery- Hydroxyapatite- Part 2: Coatings of hydroxyapatite (Revision of ISO 13779-2:2000) TC 159 ISO/FDIS 9241-171 Ergonomics of human-system interaction- Part 171: Guidance on software accessibility (Revision of ISO/TS 16071:2003) ISO/FDIS 15743 Ergonomics of the thermal environment- Cold workplaces- Risk assessment and management TC 163 ISO/FDIS 12575-1 Thermal insulation- Exterior insulating systems for foundations- Part 1: Specification TC 173 ISO/FDIS 7176-10 Wheelchairs- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs (Revision of ISO 7176-10:1988) 86
TC 190 ISO/FDIS 17402 Soil quality- Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials TC 195 ISO/FDIS 21573-2 Building construction machinery and equipment- Concrete pumps- Part 2: Procedure for examination of technical parameters ISO/FIDS 21873-1 Building construction machinery and equipment- Mobile crushers- Part 1: Terminology and commercial specifications TC 197 ISO/FDIS 22734-1 Hydrogen generators using water electrolysis process- Part 1: Industrial and commercial applications (Revision of ISO/CD 22734) TC 198 ISO/FDIS 13408-1 Aseptic processing of health care products- Part 1: General requirements (Revision of ISO 13408-1:1998) TC 202 ISO/FIDS 22493 Microbeam analysis- Scanning electron microscopy- Vocabulary TC 211 ISO/FDIS 6709 Standard representation of geographic point location by coordinates (Revision of ISO 6709:1983) TC 215 ISO/FDIS 27799 Health informatics- Information security management in health using ISO/IEC 27002 TC 220 ISO/FDIS 21013-1 Cryogenic vessels- Pressure-relief accessories for cryogenic service- Part 1: Reclosable pressure-relief valves JTC 1 ISO/IEC 10648:2003/ Information technology- Universal Multiple-Octet Coded Character Set (UCS)- FDAmd 4 Amendment 4: Cham, Game Tiles, and other characters ISO/IEC FDIS Information technology- Security techniques- Key management- Part 3: 11770-3 Mechanism using asymmetric techniques (Revision of ISO/IEC 11770-3:1999, ISO/IEC 15946-3:2002) ISO/IEC 14496-3:2005/ Information technology- Coding of audio-visual objects- Part 3: Audio- FDAmd 9 Amendment 9: Enhanced low delay AAC ISO/IEC FDIS Information technology- Radio frequency identification for item management- 18000-1 Part 1: Reference architecture and definition of parameters to be standardized (Revision of ISO/IEC 180001-1:2004) ISO/IEC 23002-1: Information technology- MPEG video technologies- Part 1: Accuracy 2006/FDAmd 1 requirements for implementation of integer-output 8x8 inverse discrete cosine transform- Amendment 1: Software for integer IDCT accuracy testing ISO/IEC FDIS Information technology- MPEG video technologies- Part 2: Fixed-point 8x8 23002-2 inverse discrete cosine transform and discrete cosine transform ISO/IEC FDIS Information technology- Biometric profiles for interoperability and data 24713-2 interchange- Part 2: Physical access control for employees at airports ISO/IEC FDIS 24759 Information technology- Security techniques- Test requirements for cryptographic modules ISO/IEC FDIS 24773 Software engineering- Certification of software engineering professionals- Comparison framework ISO/IEC FDIS 27011 Information technology- Information security management guidelines for telecommunications _87
20/933/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-10: Test for vertical flame 60332-3-10 Ed.1.0 spread of vertically-mounted bunched wires or cables- Apparatus 20/934/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-22: Test for vertical flame 60332-3-22 Ed.1.0 spread of vertically-mounted bunched wires or cables- Category A 20/935/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-23: Test for vertical flame 60332-3-23 Ed. 1.0 spread of vertically-mounted bunched wires or cables- Category B 20/936/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-24: Test for vertical flame 60332-3-24 Ed. 1.0 spread of vertically-mountedbunched wires or cables- Category C 20/937/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-25: Test for vertical flame 60332-3-25 Ed. 1.0 spread of vertically-mounted bunched wires or cables- Category D 20/938/CDV IEC 60800 Ed. 3.0 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation 23E/650/FDIS IEC 62335 Ed.1 Circuit breakers- Switched protective earth portable residual current devices for class I and battery powered vehicle applications 42/236/CDV IEC 60060-1 Ed. 3.0 High-voltage test techniques- Part 1: General definitions and test requirements 51/928A/CDV REVISED Amendment 1 Calculation of the effective parameters of magnetic piece parts to IEC 60205, Ed 3 57/930/FDIS IEC 61968-13 Ed.1 Application integration at electric utilities- System interfaces for distribution management- Part 13: CIM RDF Model exchange format for distribution 61F/744/CDV IEC 60745-2-5 Ed. 5.0 Hand-held motor-operated electric tools- Safety- Part 2-5: Particular requirements for circular saws 61F/747/CDV IEC 60745-2-13-A1 Ed 2.0 Hand-held motor-operated electric tools- Safety- Part 2-13: Particular requirements for chain saws 61F/748/CDV IEC 60745-2-15 A1 Ed 2.0 Hand-held motor-operated electric tools-part 2-15: Particular requirements for hedge trimmers 72/766/CDV IEC 60730-1 Ed.4 Automatic electrical controls for household and similar use - Part 1: General requirements 78/741/FDIS IEC 61230 Ed.2 Live working- Portable equipment for earthing or earthing and short-circuiting 86C/832/CDV IEC 62343-5-1 Ed. 1.0 Dynamic modules- Test methods- Part 5-1: Dynamic Gain tilt equalizer- Response time measurement 86C/833/DTR IEC 62572-2 TR Ed. 1.0 Fibre optic active components and devices- Reliability standards- Part 2: Technical report on laser module degradation 95/231/CDV IEC 60255-1 Ed.1 Measuring relays and protection equipment- Part 1: Common requirements 100/1386/CDV IEC 62448 Multimedia systems and equipment- Multimedia e-publishing and e-books- Generic format for e-publishing (TA10) CIS/A/786/FDIS Amendment 2 to Specification for radio disturbance and immunity measuring apparatus and CISPR 16-1-4 Ed.2 methods- Part 1-4: Radio disturbance and immunity measuring apparatus- Ancillary equipment- Radiated disturbances 88
34B/1381/FDIS IEC 60238 A1 Ed.8 Edison screw lampholders 34B/1382/FDIS IEC 60399 A1 Ed.2 Barrel thread for lampholders with shade holder ring 34B/1383/FDIS IEC 60400 Ed.7 Lampholders for tubular fluorescent lamps and starterholders 34B/1384/FDIS IEC 60838-1 A1 Ed.4 Miscellaneous lampholders- Part 1: General requirements and tests 34B/1385/FDIS IEC 61184 Ed.3 Bayonet lampholders 48B/1885/FDIS IEC 60512-16-3 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-3: Mechanical tests on contacts and terminations- Test 16c: Contact-bending strength 48B/1886/FDIS IEC 60512-16-5 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-5: Mechanical tests on contacts and terminations- Test 16e: Gauge retention force (resilient contacts) 48B/1887/FDIS IEC 60512-16-6 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-6: Mechanical tests on contacts and terminations- Test 16f: Robustness of terminations 48B/1888/FDIS IEC 60512-16-7 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-7: Mechanical tests on contacts and terminations- Test 16g: Measurement of contact deformation after crimping 48B/1889/FDIS IEC 60512-16-14 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-14: Mechanical tests on contacts and terminations- Test 16n: Bending strength, fixed male tabs 48B/1890/FDIS IEC 60512-16-16 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-16: Mechanical tests on contacts and terminations- Test 16p: Torsional strength, fixed male tabs 48B/1891/FDIS IEC 60512-16-17 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-17: Mechanical tests on contacts and terminations- Test 16q: Tensile and compressive strength, fixed male tabs 62D/682/CDV IEC 60601-2-18 Ed.3 Medical electrical equipment- Part 2-18: Particular requirements for basic safety and essential performance of endoscopic equipment 86A/1215/FDIS IEC 60794-2-41 Ed. 1.0 Optical fibre cables- Part 2-41: Indoor cables- Product specification for simplex and duplex buffered A4 fibres 100/1386A/CDV IEC 62448 Multimedia systems and equipment- Multimedia e-publishing and e-books- Generic format for e-publishing (TA10) CIS/B/459/CDV CISPR 11 f2 Ed5 Selection criteria for the minimum separation distance between EUT and measurement antenna- Proposal to replace the class criterion currently used in CISPR 11 by a size-of-equipmentcriterion 15/442/FDIS IEC 60626-3 Ed. 3.0 Combined flexible materials for electrical insulation- Part 3: Specifications for individual materials 40/1915/FDIS IEC 60384-1 Fixed capacitors for use in electronic equipment- Part 1: Generic specification 47E/361/CDV IEC 60747-14-1, Ed. 2 Semiconductor devices- Part 14-1: Semiconductor sensors- Generic _89
specification for sensors 47E/362/CDV IEC 60747-14-3, Ed. 2 Semiconductor devices- Part 14-3: Semiconductor sensors- Pressure sensors 48B/1892/FDIS IEC 60512-26-100 Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7- Tests 26a to 26g 48B/1893/FDIS IEC 61076-2-101 Ed. 2.0 Connectors for electronic equipment- Product requirements- Part 2-101: Circular connectors- Detail specification for M12 connectors with screw-locking 59D/343/CDV IEC 60456 Ed. 5.0 Clothes washing machines for household use- Methods for measuring the performance 61/3637/FDIS IEC 60335-2-8-A2 Ed 5.0 Household and similar electrical appliances- Safety- Part 2-8: Particular requirements for shavers, hair clippers and similar appliances 62C/445/CDV IEC 61676 A1 Ed.1 Medical electrical equipment- Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology 86A/1219/CDV IEC 60794-3-21 Ed. 2.0 Optical fibre cables- Part 3-21: Outdoor optical fibre cables- Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling 86A/1220/CDV IEC 60794-3-12 Ed. 2.0 Optical fibre cables- Part 3-12: Outdoor optical fibre cables- Product specification for duct and directly buried optical telecommunication cables for use in premises cabling 34C/833/CDV IEC 61347-1 A1 Ed.2 Lamp controlgear- Part 1: General and safety requirements 17B/1599/CDV IEC 60947-4-1 Ed. 3.0 Low-voltage switchgear and controlgear- Part 4-1: Contactors and motorstarters- Electromechanical contactors and motor-starters 25/382/FDIS IEC 62428 Ed.1 Electric power engineering- Modal components in three-phase AC systems- Quantities and transformations 26/381/CDV IEC 60974-8 Ed.2 Arc welding equipment- Part 8: Gas consoles for welding and plasma cutting systems 48B/1902/CDV IEC 61076-3-117 Ed. 1.0 Connectors for electronic equipment- Product requirements- Part 3-117: Rectangular connectors- Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface- Variant 14 related to IEC 61076-3-106- Push pull coupling 51/931/CDV IEC 60424-5 Ed.1 Ferrite cores- Guide on the limits of surface irregularities- Part 5: Planar-cores 64/1641/FDIS CEI 60364-4-43 Ed.3 Installations électriques à basse tension- Partie 4-43: Protection pour assurer la sécurité- Protection contre les surintensités 88/316/CDV IEC 61400-25-6 Ed.1 Wind turbines- Part 25-6: Communications for monitoring and control of wind power plants- Logical node classes and data classes for condition monitoring 91/766/CDV IEC 61191-6, Ed. 1 Printed board assemblies- Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA 108/297/CDV IEC 60950-1-A1 Ed 2.0 Information technology equipment- Safety- Part 1: General requirements 90
_91
92
_93
94
_95
96
_97
98
_99
100
_101
102
_103
104