LABORATORY INSTRUMENTATION
MINI SLIDE DRYER The Convenient Way To Dry Slides. Temperature control to 75 C from ambient Clear front for easy viewing Thermal switch for overheat protection Accommodates two slide staining racks Dimensions: 80mm (W) x 55mm (D) x 17mm (H) ELECTRICAL DIMENSIONS WEIGHT CODE 30 Volts (50 Watts) W/80mm H/17mm D/55mm 5KG (11lb) NSI-00946
SLIDE DRYING HOTPLATE Temperature controlled hotplate from slightly above ambient to 100ºC. Holds up to fifty standard slides and has three drying options. Durable and easy to clean surface, with coated aluminium top to reduce glare for viewing specimens. ELECTRICAL DIMENSIONS WEIGHT CODE 30 Volts (150 Watts) W/390mm H/90mm D/180mm.4KG (5.3lb) MH6616
SECTION MOUNTING BATH Bath for floating out sections with built in temperature controller from 40ºC to 75ºC. Built in safety device to shut off energy supply to the heater in event of overheat condition such as boiling dry. The bath has a durable aluminium exterior and plastic lid available which is easy to clean. ELECTRICAL CAPACITY CHAMBER OVERALL LID DIMENSIONS DIMENSIONS WEIGHT CODE CODE 30 Volts (150 Watts).5 Litres H/70mm D/mm H/130mm D/330mm.7KG (6lb) MH8517 MH8517L
WAX DISPENSER White enamel 4.5 litre capacity wax dispenser. Tap has a filter, heater with regulator and LED showing in use. Main tank is anodised black stove enamel and has a temperature regulator with safety warning over-temperature LED and in use LED. CHAMBER OVERALL ELECTRICAL CAPACITY DIMENSIONS DIMENSIONS WEIGHT CODE 30 Volts (150 Watts) 4.5 Litres H/150mm D/150mm H/300mm D/80mm 4.5KG (10lb) MH853
PARAFFIN SECTION MOUNTING BATH Black anodised aluminium giving excellent visibility of specimens Variable Heat Setting with temperature regulator and controlled by a thermostat with fluid expansion sensor Wide surround giving improved draining and support area External casing made of even painted aluminium coated with epoxy paint Insulated interior with fibreglass to minimise heat loss and maintain uniform temperature
GENERAL DESCRIPTION The histology section mounting bath has a black anodised aluminium giving excellent visibility of specimens. It has a variable heat setting with a temperature regulator, which is controlled by a thermostat with a fluid expansion Sensor. The wide surround gives improved draining and support area. The external casing is made of oven painted aluminium coated with epoxy paint making an easy clean finish. The unit has an insulated interior with fibreglass to minimise heat loss and maintain uniform temperature. ACCESSORY Lid To Fit AVAILABILITY & ORDERING DETAILS This item is available form stock for next day delivery. Product Code: FLC001 Paraffin Section Mounting Bath Circular Product Code: FLC00 Lid for FLC001 TECHNICAL Voltage: 30V Power: 50W Internal volume: 1.5 litres Temp range: +5 amb. to +90ºC Protection rating: IP 54 Tank precision [HO]: ±1.5ºC Internal dimension DxH: 00x60mm External dimension DxH: 330x10mm
LABORATORY INCUBATOR The General Purpose Incubator Stainless steel chamber Optional fan assisted heater on 30L or higher models Temperature control with safety overheat thermostat Optional windowed door available extra Full two year warranty GENERAL DESCRIPTION The exterior is constructed from sheet steel finished in an easy clean powder coated paint. The interior chamber is made from stainless steel chamber with a mild steel coated with aluminium (CLAD) available as an option.
Fitted with fixed shelf runners and removable chrome plated wire grid shelves. The top vent is fitted with a clip to hold a mercury in glass thermometer. The vertical style units are fitted with the controls below the door, the horizontal style units with the controls fitted on the side. The incubators have a solid steel door as standard or as an alternative a door with an integral viewing window (VIS) can be fitted. As an option a double door, comprising steel outer with an inner glass door is also available. HEATING Heated by Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The maximum temperature depends on the specification of the model ordered so please contact us for more information. The 00 litre units have fan circulation as standard. CONTROLS The control system comprises of a direct reading thermostat and overheat thermostat both with calibrated scales and tamper proof locks. They also include main switch with indicator and heat and overheat indicators. Options include a PID Microprocessor controller with dual displays of set point and actual temperature, which are auto-tuned for each individual unit to optimise the heat up, overshoot and control of temperature. DIMENSIONS AND WEIGHT Volume Internal External Without fan External With fan Shelves Shelf Positions Weight Litres Dimensions HxWxD(cm) Dimensions HxWxD(cm) Dimensions HxWxD(cm) MINI/6/SS incubator 6 15 x 3 x 19 39 x 3 x 33 N/A 1 1 7 MINI/18/SS incubator 18 6 x 6 x 7 5 x 38 x 41 N/A 14 MINI/30/SS incubator 30 4 x 36 x 35 50 x 48 x 49 50 x 48 x 6 0 MINI/40/SS incubator 40 3 x 36 x 35 58 x 48 x 49 58 x 48 x 6 3 3 MINI/50/SS incubator 50 33 x 49 x 33 59 x 61 x 47 59 x 61 x 59 3 6 MINI/75/SS incubator 75 33 x 49 x 45 59 x 61 x 60 59 x 61 x 7 3 34 ORDERING All units have stainless steel interior with thermostatic control as standard. Where options are required simply add the option code to the original reference. i.e. MINI/75 with stainless steel interior and digital controller becomes MINI/75/SS/DIG OPTION CODES CLAD interior/clad, Stainless steel/ss, Fan circulation/f, Viewing window/vis, Double door/dd and Digital control/dig
WWW.SOLMEDIALTD.COM TEL: +44 (0)844 8080 900 FAX: +44 (0) 844 8080 901 EMAIL: LABSUPPLIES@SOLMEDIALTD.COM