Safety Program Eastern Electrical Testing Corporation 2 Skyline Drive Clarks Summit, PA 18411 (570) 586-4900
Eastern Electrical Testing Corporation Safety Program Table of Contents Safety Program... Section Basic Safety Rules... 1 Mechanical Safety... 2 Electrical Safety... 2 Typical Safety Concerns... 3 Everyone's Responsibility... 4 First Aid... 8 Initial Inspections and Testing... 9 Jobsite Inspection Record... 10 Electrical Injuries... 11 Safe Practices When Using Hand & Power Tools... 14 Safe Practices When Lifting... 15 Safe Practices When Using Scaffolds... 16 Safe Practices When Using Ladders... 17 Safety Equipment... 18 Fire Prevention and Control... 19 Motor Fleet Safety... 20 Accident Investigation... 21 Listed and Required Responsibilities... Appendix A Supervisor's Accident Investigation Forms... Appendix B Jobsite Inspection Record Forms... Appendix C Tool Box Safety Program... Section 2 Meeting Topics... Section 3 Lockout/Tagout... Section 4 Confined Space... Section 5 Trenching... Section 6 Hazard Communication Program... Section 7 Hazard Communication Program... 1 Hazardous Material Inventory... 6 Right to Know... 7 Material Safety Data Sheet Sample Form... Appendix 1 Employee Request for Material Safety Data Sheet Form... Appendix 2 Employee Acknowledgement of Training Form... Appendix 3 Training Attendance Roster... Appendix 4 Training Checklist... Appendix 5 M a t e r i a l S a f e t y D a t a S h e e t s S e c t i o n.. 8
Hot Work... Section 9 Electrical Safe Work Practices Plan... 1 Welding and Cutting Safety Program... 4 Company Policy... 7 Chapter I Welding and Cutting Safety Program G.R. Noto Electrical Construction, Inc... 8 Background... 8 Scope and Application.... 8 General Requirements... 8 Training Requirements... 9 Inspection and Maintenance... 10 Use of Welding and Cutting Tools... 10 Recommended Safety Practices... 10 Personal Protective Equipment... 11 Chapter II Welding, Cutting and Braising General Guidelines... 12 Hose and Hose Connections... 13 Welding Generators, Cables and Connectors... 13 Additional Guidelines... 14 CHAPTER III Resistance Welding - CFR 1910.255 General Requirements... 15 Spot and Seam Welding... 15 Portable Welding Machines... 16 Flash Welding Equipment... 17 Maintenance... 17 CHAPTER IV Gas Welding and Cutting - CFR 1926.350 Transporting, Moving, and Storing... 18 Compressed Gas Cylinders... 18 Placing Cylinders... 19 Treatment of Cylinders... 19 Use of Fuel Gases... 19 Fuel Gas and Oxygen Manifolds... 20 Ho se... 20 Torches... 21 Regulators and Gages... 21 Oil and Grease Hazards... 21 Additional Rules... 21 CHAPTER V Arc Welding and Cutting - CFR 1926.351 Manual Electrode Holders... 22 Welding Cables and Connectors... 22 Ground Returns and Machine Grounding... 22 Operating Instructions... 23 Shielding... 23 Revised 5115112
CHAPTER VI Fire Prevention - CFR 1926.352... 24 CHAPTER VII Ventilation and Protection in Welding, Cutting and, Heating - CFR 1926.353 Mechanical Ventilation... 26 Welding, Cutting, and Heating in Confined Spaces... 26 Welding, Cutting, and Heating of Metals of Toxic Significance... 27 Inert-gas Metal-arc Welding... 27 General Welding, Cutting, and Heating... 28 CHAPTER VIII Training Requirements - CFR 1926.2... 29 Welding and Cutting - Safety Forms Areas Surveyed for Welding and Cutting... 30 Other Equipment... 31 Safety Team Member Employee Training Log... 32 Employee Training Record... 33 Fall Protection Program... Section 10 Respiratory Protection Program... Section 11 Scissor & Manlift Safety... Section 12 Aerial Lift Safety... 1 Safety Rules for Aerial Work Platform... 10 Tool Box Topic - Aerial Work Platforms... 15 When to use fall arrests with scissor lifts... 16 Operator Evaluation Form... 17 Operator Review... 18 Training Certificate... 20 Aerial Devices Safety Manual... 21 Aerial Platform Safety Manual... 69 Environmental Practices... Section 13 Purpose... Definitions... Policy or Policy Description... 1 Training Requirements... 1 Responsibilities... 1 Document Management System... 2 Spill Prevention and Spill Reporting... 2 Materials Storage... 2 Waste Management... 3 Excavations, Soil Disturbance and Excess Soil... 3 Handling and Disposal of Construction and Demolition Debris... 5 NFPA 70E Safety Training... Section 14
Bloodborne Pathogens... Section 15 Forklift Operation Plan... Section 16 Hand Protection Policy... Section 17 Mobile Communication Device Policy... Section 18 Workplace Safety Committee Bylaws... Section 19