EN - Available documents withdrawn between and

Similar documents
IEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas

IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation

Vydané medzinárodné normy a iné publikácie IEC za obdobie od do

IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018

Use case methodology - Part 2: Definition of the templates for use cases, actor list and requirements list 4 IEC 60836:2015 PRV

(Notices) EUROPEAN COMMISSION

NEWS STANDARDS: 2017/01

IEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas

Elenco delle Norme CENELEC rese disponibili nel mese di Marzo 2017

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do

BSOL Modules EC Directives

Mauritian Standards/Amendments Published in 2013

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.

IEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.

Nr. Standard reference Title

Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings

(Notices) EUROPEAN COMMISSION

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

Safety Standards for Electronic Products

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 298/02)

IEC PROJETOS EM VOTAÇÃO

Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 418/2017 Απ. 5053, Απιθμόρ 418. ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 έσο 2012

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. July 2017

Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements 5 EN 716-2:2017

ISO NORMAS PUBLICADAS

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1

IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON

Nr. Standard reference

Nr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors

NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. januára 2011 do 31. januára Documents Title Closing Date

IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring

CORRIGENDA. (Publication of titles and references of harmonised standards under Union harmonisation legislation)

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 173/05)

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017

C 319/6 Official Journal of the European Union

Just Published. Karl Ruling. 118 publications since Just Published Sent: Saturday, 01 December :39

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 293/03)

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 335/02)

Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method 3 EN 280:2013+A1:2015

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

IEC PROJETOS EM VOTAÇÃO. IEC Ed.4: Railway applications - Traction transformers and inductors on board rolling stock

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 126/02)

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2018

ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO

Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) 3 EN ISO 287:2017

NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date

Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2017

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2018

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Ιούλιο 2018, μπορείτε να τα δείτε στο ακόλουθο link:

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 092/02)

รายช อเอกสารใหม (มกราคม-ม นาคม 2559)

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. January 2018

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

INTERNATIONAL STANDARD

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES

ISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.

Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam 2 EN 54-26:2015

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018

This is a preview - click here to buy the full publication

STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION. Title ICS1 Withdrawn

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. October 2014

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2014

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. September 2015

Vydané medzinárodné normy a iné publikácie IEC za obdobie od do

26: Carbon monoxide detectors - Point detectors. 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors

Industrial furnaces and associated processing equipment Safety. Part 2: Combustion and fuel handling systems

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do Stránka 1

Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners 4 EN 565:2017

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. June 2014

EXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)

Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009)

New Sensing products of Meggitt Group. Moscow - October the 23 rd

Standards - Consolidated with amendments The dates in brackets following the document number are the year of publication and the approval date.

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 389/04)

Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC

G Calculation of perforation efficiency ISO/TR 24498: 2006 Paper, board and pulps Estimation of uncertainty for test methods C

C 271/32 Official Journal of the European Union

INTERNATIONAL STANDARD

Project planning (original) EN. Functional safety. Inverter i550-cabinet kw

Automatic Water System Pump SERIES

Numerical Standards Listing

OFFICIAL JOURNAL OF IN VITRO DIAGNOSTIC MEDICAL DEVICES DIRECTIVE (98/79/EC)

Vydané medzinárodné normy a iné publikácie IEC za obdobie od do

Transcription:

EN - Available documents withdrawn between 2018-07-01 and 2018-07-31 Standard reference Withdrawal date English title CEN ISO/TS 16530-2:2015 2018-07-04 Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) CEN ISO/TS 17427:2014 2018-07-18 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) CEN ISO/TS 17892-12:2004 2018-07-11 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: CEN ISO/TS Determination of Atterberg limits 17892-12:2004/AC:2005 (ISO/TS 17892-12:2004) CEN/TR 13387-2:2015 2018-07-11 Child use and care articles - General safety guidelines - Part 2: Chemical hazards CEN/TR 13387-3:2015 2018-07-04 Child use and care articles - General safety guidelines - Part 3: Mechanical hazards CEN/TS 1992-4-1:2009 2018-07-18 Design of fastenings for use in concrete - Part 4-1: General CEN/TS 1992-4-2:2009 2018-07-18 Design of fastenings for use in concrete - Part 4-2: Headed Fasteners CEN/TS 1992-4-3:2009 2018-07-18 Design of fastenings for use in concrete - Part 4-3: Anchor channels CEN/TS 1992-4-4:2009 2018-07-18 Design of fastenings for use in concrete - Part 4-4: Post-installed fasteners - Mechanical systems CEN/TS 1992-4-5:2009 2018-07-18 Design of fastenings for use in concrete - Part 4-5: Post-installed fasteners - Chemical systems CEN/TS 419241:2014 2018-07-04 Security Requirements for Trustworthy Systems Supporting Server Signing EN 10221:1995 2018-07-25 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions EN 12079-1:2006 2018-07-11 Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking Replaced by See Resolution CEN/BT C088/2018 EN ISO 17427-1:2018 EN ISO 17892-12:2018 CEN/TR 13387-2:2018 CEN/TR 13387-3:2018 EN 1992-4:2018 EN 1992-4:2018 EN 1992-4:2018 EN 1992-4:2018 EN 1992-4:2018 EN 419241-1:2018 EN ISO 9443:2018 EN ISO 10855-1:2018 1

Standard reference Withdrawal date English title EN 12079-2:2006 2018-07-11 Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking EN 12079-3:2006 2018-07-11 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing EN 12285-1:2003 2018-07-04 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids EN 1279-1:2004 EN 1279-1:2004/AC:2006 2018-07-25 Glass in Building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description EN 1279-2:2002 2018-07-25 Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration EN 1279-3:2002 2018-07-25 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances EN 1279-4:2002 2018-07-25 Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals EN 1279-5:2005+A2:2010 2018-07-25 Glass in building - Insulating glass units - Part 5: Evaluation of conformity EN 1279-6:2002 2018-07-25 Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests EN 12809:2001 2018-07-25 Residential independent boilers fired by EN 12809:2001/A1:2004 solid fuel - Nominal heat output up to 50 kw - Requirements and test methods EN 12809:2001/A1:2004/AC: 2007 EN 12809:2001/AC:2006 EN 12815:2001 2018-07-25 Residential cookers fired by solid fuel - EN 12815:2001/A1:2004 Requirements and test methods EN 12815:2001/A1:2004/AC: 2007 EN 12815:2001/AC:2006 Replaced by EN ISO 10855-2:2018 EN ISO 10855-3:2018 EN 12285-1:2018 EN 1279-1:2018 EN 1279-2:2018 EN 1279-3:2018 EN 1279-4:2018 EN 1279-5:2018 EN 1279-6:2018 EN 16510-1:2018 EN 16510-1:2018 2

Standard reference Withdrawal date English title EN 12972:2015 2018-07-04 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks EN 13229:2001 2018-07-25 Inset appliances including open fires EN 13229:2001/A1:2003 fired by solid fuels - Requirements and test methods EN 13229:2001/A2:2004 EN 13229:2001/A2:2004/AC: 2007 EN 13229:2001/AC:2006 EN 13229:2001/A2:2004/AC: 2006 EN 13240:2001 2018-07-25 Roomheaters fired by solid fuel - EN 13240:2001/A2:2004 Requirements and test methods EN 13240:2001/A2:2004/AC: 2007 EN 13240:2001/AC:2006 EN 13317:2002+A1:2006 2018-07-11 Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly EN 13704:2002 2018-07-18 Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) EN 14025:2013+A1:2016 2018-07-25 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction EN 14067-6:2010 2018-07-25 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment EN 14399-7:2007 2018-07-25 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies EN 14399-8:2007 2018-07-25 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut Replaced by EN 12972:2018 EN 16510-1:2018 EN 16510-1:2018 EN 13317:2018 EN 13704:2018 EN 14025:2018 EN 14067-6:2018 EN 14399-7:2018 EN 14399-8:2018 3

Standard reference Withdrawal date assemblies English title EN 15860:2010 2018-07-25 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods Replaced by EN 15860:2018 EN 1616:1997 2018-07-04 Sterile urethral catheters for single use EN ISO 20696:2018 EN 1616:1997/A1:1999 EN 1617:1997 2018-07-04 Sterile drainage catheters and accessory devices for single use EN 16726:2015 2018-07-18 Gas infrastructure - Quality of gas - Group H EN 3745-505:2007 2018-07-18 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength EN 4641-001:2009 2018-07-25 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification EN 9115:2013 2018-07-11 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) EN ISO 10042:2005 2018-07-11 Welding - Arc-welded joints in aluminium and its alloys - Quality levels EN ISO 10042:2005/AC:2006 for imperfections (ISO 10042:2005) EN ISO 10477:2004 2018-07-04 Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004) EN ISO 10927:2011 2018-07-11 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011) EN ISO 15103-2:2007 2018-07-25 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) EN ISO 15138:2007 2018-07-11 Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) EN ISO 15612:2004 2018-07-18 Specification and qualification of welding procedures for metallic EN ISO 20697:2018 EN 16726:2015+A1:2018 EN 3745-505:2018 EN 4641-001:2018 EN 9115:2018 EN ISO 10042:2018 EN ISO 10477:2018 EN ISO 10927:2018 EN ISO 20557-2:2018 EN ISO 15138:2018 EN ISO 15612:2018 4

Standard reference Withdrawal date English title materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) EN ISO 15952:2011 2018-07-25 Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2006) EN ISO 16151:2008 2018-07-25 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005) EN ISO 1716:2010 2018-07-11 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) EN ISO 17708:2003 2018-07-11 Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003) EN ISO 19011:2011 2018-07-04 Guidelines for auditing management systems (ISO 19011:2011) EN ISO 23611-1:2011 2018-07-11 Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and formalin extraction of earthworms (ISO 23611-1:2006) EN ISO 28941-1:2008 2018-07-11 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008) EN ISO 3923-1:2010 2018-07-11 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008) EN ISO 3949:2014 2018-07-25 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009) EN ISO 4048:2008 2018-07-18 Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content (ISO 4048:2008) EN ISO 4098:2006 2018-07-11 Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter (ISO 4098:2006) EN ISO 4264:2007 2018-07-18 Petroleum products - Calculation of EN ISO 4264:2007/A1:2013 cetane index of middle-distillate fuels by Replaced by EN ISO 15952:2018 EN ISO 16151:2018 EN ISO 1716:2018 EN ISO 17708:2018 EN ISO 19011:2018 EN ISO 23611-1:2018 EN ISO 20557-1:2018 EN ISO 3923-1:2018 EN ISO 3949:2018 EN ISO 4048:2018 EN ISO 4098:2018 EN ISO 4264:2018 5

Standard reference Withdrawal date English title 2018-07-18 the four-variable equation (ISO 4264:2007) Replaced by EN ISO 4957:1999 2018-07-18 Tool steels (ISO 4957:1999) EN ISO 4957:2018 EN ISO 5398-1:2007 2018-07-18 Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2007) EN ISO 5398-3:2007 2018-07-18 Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2007) EN ISO 5398-1:2018 EN ISO 5398-3:2018 EN ISO 6875:2011 2018-07-25 Dentistry - Patient chair (ISO 6875:2011) EN ISO 7494-1:2018 EN ISO 7494-1:2011 2018-07-25 Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011) EN ISO 7590:2009 2018-07-25 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009) EN ISO 7494-1:2018 EN ISO 7590:2018 6

CENELEC - Monthly list of publications made available July 2018 From these 17 documents, ENs have to be implemented by the specified date INFORMATION CONCERNING THE IMPLEMENTATION IS TO BE DELIVERED THROUGH iprojex Publication date EN 50059:2018 DAV: 2018-07-27 DOA: 2018-10-27 2019-01-27 2021-07-27 WI: 58819 EN 50341-2-9:2017/A1:2018 DAV: 2018-07-27 DOA: 2018-11-15 2019-05-15 2021-05-15 WI: 66722 EN 50377-14-1:2018 DAV: 2018-07-13 DOA: 2018-08-14 2019-02-14 2019-05-14 WI: 62902 EN 50491-12-1:2018 DAV: 2018-07-27 DOA: 2018-12-18 2019-06-18 2021-06-18 WI: 63376 EN 50594:2018 DAV: 2018-07-20 DOA: 2018-10-23 2019-04-23 2021-04-23 WI: 62877 CLC/TR 50625-6:2018 DAV: 2018-07-13 DOA: WI: 65313 EN 50640:2018 DAV: 2018-07-20 DOA: 2018-10-23 2019-04-23 2021-04-23 WI: 62876 EN IEC 60079-0:2018 DAV: 2018-07-06 DOA: 2018-10-06 2019-01-06 2021-07-06 WI: 63177 EN IEC 60404-6:2018 DAV: 2018-07-13 DOA: 2018-09-29 Publication title Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials Overhead electrical lines exceeding AC 1 kv - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or B6 fibre for Category C according to EN 61753 1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Building Resource manager - General Requirements and Architecture Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614 Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intended for commercial use Explosive atmospheres - Part 0: Equipment - General requirements Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at 1

CENELEC - Monthly list of publications made available Publication date 2019-03-29 2021-06-29 WI: 63184 EN IEC 60404-8-11:2018 DAV: 2018-07-06 DOA: 2018-07-12 2019-01-12 2021-04-12 WI: 64206 EN IEC 60404-16:2018 DAV: 2018-07-06 DOA: 2018-07-12 2019-01-12 2021-04-12 WI: 64764 EN IEC 60794-1-31:2018 DAV: 2018-07-06 DOA: 2018-09-19 2019-03-19 2021-06-19 WI: 62779 EN IEC 61290-4-3:2018 DAV: 2018-07-13 DOA: 2018-09-01 2019-03-01 2021-06-01 WI: 65085 EN IEC 61837-2:2018 DAV: 2018-07-13 DOA: 2018-09-12 2019-03-12 2021-06-12 WI: 64919 EN IEC 62046:2018 DAV: 2018-07-06 DOA: 2018-08-02 2019-02-02 2021-05-02 WI: 24590 EN 62153-4-7:2016/A1:2018 DAV: 2018-07-13 DOA: 2018-09-13 2019-03-13 2021-06-13 WI: 63447 EN IEC 62610-2:2018 DAV: 2018-07-13 DOA: 2018-09-20 2019-03-20 2021-06-20 WI: 63141 Publication title frequencies in the range 20 Hz to 100 khz by the use of ring specimens Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures Safety of machinery - Application of protective equipment to detect the presence of persons Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling 2

C E NE L E C - P ublications forecas t for Augus t 2018 Total:52 WI number Standard reference Forecasted date 59248 EN 50107-3:2018 2018-08-03 60942 EN 50136-1:2012/A1:2018 2018-08-03 63176 EN IEC 60079-15:2018 2018-08-10 63616 EN IEC 62435-4:2018 2018-08-10 64201 EN IEC 62282-5-100:2018 2018-08-10 61856 EN IEC 60238:2018/ A1:2018 2018-08-10 64131 EN 61400-11:2013/A1:2018 2018-08-10 64265 EN IEC 62676-5:2018 2018-08-10 62840 EN IEC 61987-92:2018 2018-08-10 JT005104 EN 16603-20-20:2018 2018-08-15 62831 EN IEC 61265:2018 2018-08-17 62582 EN 60335-2-27:2013/A2:2018 2018-08-17 61914 EN 60335-2-109:2010/A2:2018 2018-08-17 61444 EN 60335-2-28:2003/A11:2018 2018-08-17 61442 EN 60335-2-16:2003/A11:2018 2018-08-17 61299 EN 60335-2-4:2010/A11:2018 2018-08-17 60734 EN 60335-2-15:2016/A11:2018 2018-08-17 60243 FprEN 50318:2018 2018-08-17 59924 EN 60335-2-11:2010/FprA2:2017 2018-08-17 58970 EN IEC 60375:2018 2018-08-17 24703 EN 60335-2-109:2010/A1:2018 2018-08-17 58483 EN 60204-1:2018 2018-08-17 63186 EN 61162-460:2018 2018-08-17 63185 EN IEC 61162-450:2018 2018-08-17 62976 FprEN 61375-2-6:2018 2018-08-17 JT014011 FprEN ISO 50001 2018-08-22 62893 EN IEC 60376:2018 2018-08-24 63070 EN IEC 61788-24:2018 2018-08-24 62744 EN IEC 60034-4-1:2018 2018-08-24 62897 EN IEC 63032:2018 2018-08-24 65439 EN IEC 62325-451-6:2018 2018-08-24 1

WI number Standard reference Forecasted date 63066 EN IEC 62442-3:2018 2018-08-24 65308 EN 62351-3:2014/FprA1:2018 2018-08-24 63193 EN IEC 62271-102:2018 2018-08-24 63242 EN 61466-2:1998/A2:2018 2018-08-24 63301 FprEN 60601-2-16:2018 2018-08-24 63601 EN IEC 60721-2-4:2018 2018-08-24 62700 EN IEC 60127-8:2018 2018-08-24 64130 EN IEC 61755-6-2:2018 2018-08-24 61708 EN IEC 60900:2018 2018-08-24 61526 EN IEC 60794-4:2018 2018-08-24 64244 EN IEC 62969-4:2018 2018-08-24 64295 EN 50131-2-10:2018 2018-08-24 64815 EN IEC 63093-11:2018 2018-08-24 64831 CLC/ TR 50600-99-3:2018 2018-08-24 65095 CLC/ TR 50600-99-1:2018 2018-08-24 65096 CLC/ TR 50600-99-2:2018 2018-08-24 63367 EN 62386-101:2014/A1:2018 2018-08-31 64814 EN IEC 63093-6:2018 2018-08-31 63615 EN IEC 60384-26:2018 2018-08-31 60533 EN 50556:2018 2018-08-31 66145 EN IEC 62680-1-3:2018 2018-08-31 CE NE L E C - P ublications forecas t for S eptember 2018 Total:20 WI number Standard reference Forecasted date 63296 FprEN 80601-2-59:2017 2018-09-07 63514 EN 60335-2-6:2015/prA1:2016 2018-09-07 62252 FprEN 61482-2:2018 2018-09-07 62533 EN 61850-6:2010/FprA1:2017 2018-09-07 62699 EN 60811-501:2012/FprA1:2018 2018-09-07 62843 FprEN 60695-6-2:2018 2018-09-07 63391 FprEN 62853:2018 2018-09-07 66142 pren 61189-2-630:2017 2018-09-14 2

WI number Standard reference Forecasted date 61809 CLC/ TS 50134-9:2018 2018-09-14 64961 FprEN 61290-4-4:2018 2018-09-14 64876 EN 60705:2015/FprA2:2018 2018-09-14 64797 EN 61010-031:2015/FprA1:2018 2018-09-14 64117 FprEN 61788-23:2018 2018-09-14 64199 pren 61757-1:2017 2018-09-21 61289 FprEN 61167:2017 2018-09-21 63446 pren 62386-221:2017 2018-09-21 63064 EN 62442-1:2011/prA1:2017 2018-09-21 63065 EN 62442-2:2014/prA1:2017 2018-09-21 64062 pren 61058-2-1:2017 2018-09-28 63172 FprEN 62477-2:2018 2018-09-28 3

CEN - Monthly list of publications made available July 2018 From these 86 documents, ENs have to be implemented by 2019-01-01 INFORMATION CONCERNING THE IMPLEMENTATION IS TO BE DELIVERED THROUGH iprojex Publication date EN 419241-1:2018 DAV: 2018-07-04 DOA: 2018-10-30 WI: 00224251 EN ISO 374-1:2016/A1:2018 WI: 00162413 EN 1090-4:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00135021 EN 1279-1:2018 WI: 00129209 EN 1279-2:2018 WI: 00129210 EN 1279-3:2018 WI: 00129206 EN 1279-4:2018 WI: 00129207 EN 1279-5:2018 2019-01-31 2020-04-30 WI: 00129208 EN 1279-6:2018 WI: 00129205 Publication title Trustworthy Systems Supporting Server Signing - Part 1: General System Security Requirements Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018) Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and coldformed structures for roof, ceiling, floor and wall applications Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts Glass in building - Insulating glass units - Part 5: Product standard Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests 1

CEN - Monthly list of publications made available Publication date EN ISO 1716:2018 WI: 00127333 EN 2279:2018 WI: 04000301 EN 2280:2018 WI: 04000302 EN 2319:2018 WI: 04000337 EN 2387:2018 WI: 04000390 EN 2799:2018 WI: 04001046 EN 3745-505:2018 WI: 04004002 EN ISO 3923-1:2018 WI: CSM11096 EN ISO 3949:2018 WI: 00218199 EN ISO 4048:2018 WI: 00289195 Publication title Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018) Aerospace series - Steel FE-PM37-900 MPa Rm 1 100 MPa - Forgings - De 150 mm Aerospace series - Steel FE-PM37-900 MPa Rm 1 100 MPa - Sheet - a 6 mm Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a 75 mm Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm a 12,5 mm Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2018) Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2018) Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content (ISO 4048:2018) 2

CEN - Monthly list of publications made available Publication date EN ISO 4098:2018 WI: 00289188 EN ISO 4264:2018 WI: 00019522 EN 4510:2018 WI: 04003896 EN 4641-001:2018 WI: 04003900 EN 4832:2018 WI: 04003911 EN 4833:2018 WI: 04003912 EN 4838-004:2018 WI: 04004195 EN ISO 4957:2018 WI: EC105076 EN ISO 5398-1:2018 WI: 00289196 EN ISO 5398-3:2018 WI: 00289197 Publication title Leather - Chemical tests - Determination of water-soluble matter, watersoluble inorganic matter and water-soluble organic matter (ISO 4098:2018) Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation (ISO 4264:2018) Aerospace series - Pipe couplings, 60, spherical, in titanium alloy TI- P64001, adapters, straight, double end, with locking ring Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification Aerospace series - Adaptor, Pipe coupling 24 Cone up to 35 000 kpa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer - Inch Series - Technical specification Aerospace series - Pipe coupling 24 Cone up to 35 000 kpa (5 080 psi) Ring-locked fitting - Flareless End - Inch Series - Extra Fine Thread Pitch Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 004: With signal contact - Product standard Tool steels (ISO 4957:2018) Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2018) Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2018) 3

CEN - Monthly list of publications made available Publication date EN ISO 7494-1:2018 WI: 00055414 EN ISO 7590:2018 WI: 00188097 EN 9115:2018 WI: 04004231 EN 9300-100:2018 WI: 04004093 EN 9300-115:2018 WI: 04004090 EN ISO 9443:2018 WI: EC105077 EN ISO 10042:2018 WI: 00121743 EN ISO 10318-1:2015/A1:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00189240 EN ISO 10318-2:2015/A1:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00189241 EN ISO 10477:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00055394 Publication title Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements (ISO 7494-1:2018) Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018) Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 115: Explicit CAD assembly structure Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018) Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018) Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/Amd 1:2018) Geosynthetics - Part 2: Symbols and pictograms - Amendment 1 (ISO 10318-2:2015/Amd 1:2018) Dentistry - Polymer-based crown and veneering materials (ISO 10477:2018) 4

CEN - Monthly list of publications made available Publication date EN ISO 10855-1:2018 WI: 00012347 EN ISO 10855-2:2018 WI: 00012348 EN ISO 10855-3:2018 WI: 00012349 EN ISO 10927:2018 WI: 00139594 EN ISO 11070:2014/A1:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00205334 EN 12285-1:2018 DAV: 2018-07-04 DOA: 2018-10-31 2019-01-31 2020-04-30 WI: 00265016 EN 12814-4:2018/AC:2018 DAV: 2018-07-11 DOA: WI: 00249C27 EN 12972:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00296099 EN 13317:2018 WI: 00296092 CEN/TR 13387-2:2018 DAV: 2018-07-11 DOA: WI: 00252112 Publication title Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018) Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018) Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018) Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF- MS) (ISO 10927:2018) Sterile single-use intravascular introducers, dilators and guidewires - Amendment 1 (ISO 11070:2014/Amd 1:2018) Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly Child care articles - General safety guidelines - Part 2: Chemical hazards 5

CEN - Monthly list of publications made available Publication date CEN/TR 13387-3:2018 DAV: 2018-07-04 DOA: WI: 00252107 EN 13704:2018 WI: 00216098 EN 14025:2018 WI: 00296094 EN 14067-6:2018 WI: 00256758 EN 14399-7:2018 WI: 00185309 EN 14399-8:2018 WI: 00185310 EN ISO 15138:2018 WI: 00012343 EN ISO 15612:2018 WI: 00121677 EN 15860:2018 WI: 00249899 EN ISO 15952:2018 WI: 00444112 Publication title Child care articles - General safety guidelines - Part 3: Mechanical hazards Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2018) Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018) Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2018) 6

CEN - Monthly list of publications made available Publication date EN ISO 16151:2018 WI: 00262313 EN 16236:2018 2019-01-31 2020-04-30 WI: 00154164 EN 16510-1:2018 2019-01-31 2021-07-31 WI: 00295030 EN 16726:2015+A1:2018 WI: 00234083 EN 16755:2017/AC:2018 DAV: 2018-07-18 DOA: WI: 00175C11 CEN/TS 16826-3:2018 WI: 00140122 CEN/TS 16931-3-2:2017/AC:2018 DAV: 2018-07-18 DOA: WI: 00434C01 CEN/TR 17016-101:2018 DAV: 2018-07-04 DOA: WI: 00440012 CEN/TR 17017-101:2018 DAV: 2018-07-04 DOA: WI: 00440011 EN 17155:2018 WI: 00019518 Publication title Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018) Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control Residential solid fuel burning appliances - Part 1: General requirements and test methods Gas infrastructure - Quality of gas - Group H Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications Molecular in vitro diagnostic examinations - Specifications for preexamination processes for snap frozen tissue - Part 3: Isolated DNA Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note Electronic public procurement - Business interoperability interfaces (BII), e-ordering - Part 101: Overview Electronic public procurement - Business interoperability interfaces (BII), e-fulfilment - Part 101: Overview Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber 7

CEN - Monthly list of publications made available Publication date CEN/TS 17195:2018 WI: 00351016 CEN/TS 17196:2018 WI: 00351017 CEN/TS 17197:2018 WI: 00351018 CEN/TS 17200:2018 WI: 00351019 CEN/TS 17201:2018 WI: 00351021 CEN/TR 17207:2018 DAV: 2018-07-04 DOA: WI: 00136408 CWA 17316:2018 DAV: 2018-07-04 DOA: WI: WSSMA001 EN ISO 17427-1:2018 WI: 00278393 EN ISO 17708:2018 WI: 00309190 EN ISO 17892-12:2018 WI: 00341113 Publication title Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES) Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests Playground and recreational areas - Framework for the competence of playground inspectors Smart CE marking for construction products Intelligent transport systems - Cooperative ITS - Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO 17427-1:2018) Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018) Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018) 8

CEN - Monthly list of publications made available Publication date EN ISO 18593:2018 WI: 00275313 EN ISO 19011:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: CSF20060 EN ISO 20557-1:2018 WI: 00249901 EN ISO 20557-2:2018 WI: 00249902 EN ISO 20696:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00205323 EN ISO 20697:2018 DAV: 2018-07-04 DOA: 2018-10-31 WI: 00205324 EN ISO 23611-1:2018 WI: 00444115 Publication title Microbiology of the food chain - Horizontal methods for surface sampling (ISO 18593:2018) Guidelines for auditing management systems (ISO 19011:2018) Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20557-1:2018) Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018) Sterile urethral catheters for single use (ISO 20696:2018) Sterile drainage catheters and accessory devices for single use (ISO 20697:2018) Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and extraction of earthworms (ISO 23611-1:2018) 9

CEN - Publications forecast for August 2018 Total:97 WI number Standard reference Forecasted date 00155806 EN ISO 15874-2:2013/ A1:2018 2018-08-01 00192110 EN 16712-4:2018 2018-08-01 00252123 EN 16232:2013+A1:2018 2018-08-01 04003914 EN 4835:2018 2018-08-01 04003915 EN 4836:2018 2018-08-01 00251323 EN ISO 11238:2018 2018-08-01 00250194 CEN/ TR 17231:2018 2018-08-01 00138225 EN 17119:2018 2018-08-01 00248545 EN 16781:2018 2018-08-01 00248544 EN 16780:2018 2018-08-01 00318073 CEN/ TS 17171:2018 2018-08-01 00327091 CEN/ TS 17174:2018 2018-08-01 00155807 EN ISO 15874-3:2013/ A1:2018 2018-08-01 00155823 EN ISO 15874-5:2013/ A1:2018 2018-08-01 00423002 EN 12830:2018 2018-08-01 04001043 EN 2796:2018 2018-08-01 04000531 EN 2541:2018 2018-08-01 04000530 EN 2540:2018 2018-08-01 00248543 EN 16779-1:2018 2018-08-01 00278452 CEN/ TS 17184:2018 2018-08-01 04003913 EN 4834:2018 2018-08-01 00072118 EN 54-7:2018 2018-08-08 00054160 EN 13445-2:2014/A3:201X 2018-08-08 00023185 FprEN ISO 13769 2018-08-08 00104369 EN 12390-14:2018 2018-08-08 00162384 EN ISO 15384:2018 2018-08-08 00072149 EN 54-5:2017+A1:2018 2018-08-08 04002434 EN 6126:2018 2018-08-08 04003495 EN 2591-326:2018 2018-08-08 04003564 EN 6109:2018 2018-08-08 00240079 EN 17001:2018 2018-08-08 1

WI number Standard reference Forecasted date 00240080 EN 17002:2018 2018-08-08 04003916 EN 4838-001:2018 2018-08-08 04004004 EN 3719:2018 2018-08-08 04004041 EN 4840-101:2018 2018-08-08 00240081 EN 1395-5:2018 2018-08-08 00240082 EN 13507:2018 2018-08-08 04004178 EN 3475-411:2018 2018-08-15 04004176 EN 4604-010:2018 2018-08-15 04004154 EN 9278:2018 2018-08-15 04003724 EN 3646-003:2018 2018-08-15 04003707 EN 2591-318:2018 2018-08-15 04003627 EN 2591-100:2018 2018-08-15 00444153 EN 16167:2018 2018-08-15 00443004 EN 12131:2018 2018-08-15 00443002 EN 1885:2018 2018-08-15 00337059 EN 15597-1:2018 2018-08-15 00337056 EN 15597-2:2018 2018-08-15 00274087 EN 12312-8:2018 2018-08-15 00264153 CEN/ TS 17198:2018 2018-08-15 00252098 EN 1888-1:2018 2018-08-15 00252097 EN 1888-2:2018 2018-08-15 00249927 pren ISO 1856 2018-08-15 00190073 EN 1563:2018 2018-08-15 00160069 EN 358:2018 2018-08-15 00151455 FprEN ISO 19014-1 2018-08-15 00145074 EN 12012-1:2018 2018-08-15 00139559 EN 927-6:2018 2018-08-15 00109042 EN 13203-6:2018 2018-08-15 00088416 EN 13497:2018 2018-08-15 00088387 EN 17101:2018 2018-08-15 00085080 EN 14458:2018 2018-08-15 JT005104 EN 16603-20-20:2018 2018-08-15 00033516 EN 13126-6:2018 2018-08-15 2

WI number Standard reference Forecasted date 00019511 EN 15293:2018 2018-08-22 00033407 EN 12519:2018 2018-08-22 00038181 CEN/ TS 16818:2018 2018-08-22 00054168 EN 13445-5:2014/A1:2018 2018-08-22 00129204 EN 1096-4:2018 2018-08-22 00136381 EN 13451-10:2018 2018-08-22 00175165 EN 13756:2018 2018-08-22 00249928 pren ISO 8307 2018-08-22 00249A0G pren ISO 12058-1 rev 2018-08-22 00252122 EN 1400:2013+A2:2018 2018-08-22 00443005 EN 13088:2018 2018-08-22 00443007 EN 12130:2018 2018-08-22 00444163 CEN/ TS 16675:2018 2018-08-22 04003727 EN 3646-006:2018 2018-08-22 04003755 EN 4611-002:2018 2018-08-22 04003855 EN 2084:2018 2018-08-22 04004185 EN 3375-001:2018 2018-08-22 04004186 EN 6059-309:2018 2018-08-22 04004220 EN 2031:2018 2018-08-22 JT014011 FprEN ISO 50001 2018-08-22 WS088001 prcwa 17302 2018-08-22 00144340 EN 12733:2018 2018-08-29 00162422 EN 1073-1:2016+A1:2018 2018-08-29 00230348 CEN/ TR 17244:2018 2018-08-29 00230349 CEN/ TR 17245:2018 2018-08-29 00296091 EN 14596:2018 2018-08-29 04004309 EN 2475:2018 2018-08-29 00426001 EN 17093:2018 2018-08-29 00433001 EN 17115:2018 2018-08-29 04004221 EN 4840-001:2018 2018-08-29 04004222 EN 6049-003:2018 2018-08-29 04004223 EN 6049-001:2018 2018-08-29 00296093 EN 17110:2018 2018-08-29 3

CEN - Publications forecast for September 2018 Total:20 WI number Standard reference Forecasted date 00069212 EN 12516-1:2014+A1:2018 2018-09-05 04004249 EN 2880:2018 2018-09-05 04004248 EN 2878:2018 2018-09-05 00019532 FprCEN/ TR 17225 2018-09-07 00275323 EN ISO 6888-1:1999/ FprA2 2018-09-12 00069213 EN 12516-4:2014+A1:2018 2018-09-12 00150109 CEN/ TS 1459-8:2018 2018-09-12 00162424 EN 16523-2:2015+A1:2018 2018-09-12 00162423 EN 16523-1:2015+A1:2018 2018-09-12 00162354 EN 1149-5:2018 2018-09-12 00181072 EN 16436-1:2014+A2:2018 2018-09-19 00161084 EN 13832-2:2018 2018-09-19 00161083 EN 13832-1:2018 2018-09-19 00152011 EN 13814-3:2018 2018-09-19 00152010 EN 13814-1:2018 2018-09-19 00152009 EN 13814-2:2018 2018-09-19 00331113 FprCEN/ TS 17217 2018-09-26 00242058 FprEN 17064 2018-09-26 EC103108 FprEN 10164 2018-09-26 00245041 FprEN 1647 2018-09-26 4

CEN - Withdrawals forecast for August 2018 Total:53 WI number Standard reference Forecasted date 00162144 EN 15614:2007 2018-08-08 04003253 EN 3719:2010 2018-08-08 00240032 EN 1395-5:2007 2018-08-08 00072016 EN 54-7:2000 2018-08-08 00240042 EN 13507:2010 2018-08-08 00072119 EN 54-5:2017 2018-08-08 00023147 EN ISO 13769:2009 2018-08-08 00222014 EN 12131:1998 2018-08-15 00190058 EN 1563:2011 2018-08-15 00088120 EN 13497:2002 2018-08-15 00033346 EN 13126-6:2008 2018-08-15 04001940 EN 2591-318:1998 2018-08-15 00274065 EN 12312-8:2005+A1:2009 2018-08-15 04003503 EN 3475-411:2014 2018-08-15 04003753 EN 4604-010:2017 2018-08-15 04001735 EN 3646-003:2006 2018-08-15 00337021 EN 15597-1:2009 2018-08-15 00249638 EN ISO 1856:2000/A1:2007 2018-08-15 00252059 EN 1888:2012 2018-08-15 00444122 EN 16167:2012 2018-08-15 00337037 CEN/TS 15597-2:2012 2018-08-15 00160032 EN 358:1999 2018-08-15 00249345 EN ISO 1856:2000 2018-08-15 04002566 EN 2591-100:2005 2018-08-15 00145060 EN 12012-3:2001+A1:2008 2018-08-15 00085054 EN 14458:2004 2018-08-15 00139134 EN 927-6:2006 2018-08-15 00222005 EN 1885:1998 2018-08-15 00145058 EN 12012-1:2007+A1:2008 2018-08-15 00019349 CEN/TS 15293:2011 2018-08-22 04001738 EN 3646-006:2006 2018-08-22 1

WI number Standard reference Forecasted date 00444026 CEN/TS 16675:2014 2018-08-22 04003821 EN 2084:2015 2018-08-22 00129089 EN 1096-4:2004 2018-08-22 04003422 EN 4611-002:2012 2018-08-22 04001505 EN 3375-001:2007 2018-08-22 00252089 EN 1400:2013+A1:2014 2018-08-22 00249625 EN ISO 8307:2007 2018-08-22 00136251 EN 13451-10:2014 2018-08-22 00249C11 EN ISO 12058-1:2002/AC:2004 2018-08-22 00033016 EN 12519:2004 2018-08-22 JT014009 EN ISO 50001:2011 2018-08-22 00249498 EN ISO 12058-1:2002 2018-08-22 00175044 EN 13756:2002 2018-08-22 00443006 EN 12130:1998 2018-08-22 00222028 EN 13088:2001 2018-08-22 00296010 EN 14596:2005 2018-08-29 04003702 EN 6049-001:2015 2018-08-29 00162C23 EN 1073-1:2016/AC:2016 2018-08-29 WS025002 CWA 15902-2:2008 2018-08-29 00144226 EN 12733:2001+A1:2009 2018-08-29 00162255 EN 1073-1:2016 2018-08-29 04003152 EN 6049-003:2009 2018-08-29 CEN - Withdrawals forecast for September 2018 Total:13 WI number Standard reference Forecasted date 00069145 EN 12516-1:2014 2018-09-05 00069158 EN 12516-4:2014 2018-09-12 00162350 EN 16523-1:2015 2018-09-12 00162345 EN 16523-2:2015 2018-09-12 00162226 EN 1149-5:2008 2018-09-12 00181068 EN 16436-1:2014+A1:2015 2018-09-19 00152005 EN 13814:2004 2018-09-19 2

WI number Standard reference Forecasted date 00161052 EN 13832-2:2006 2018-09-19 00161051 EN 13832-1:2006 2018-09-19 EC103035 EN 10164:2004 2018-09-26 00245039 EN 1647:2012 2018-09-26 00242031 CEN/TR 14819-1:2004 2018-09-26 00242032 CEN/TR 14819-2:2005 2018-09-26 3

CENELEC - Withdrawals forecast for August 2018 Total:12 WI number Standard reference Forecasted date 17001 EN 61400-25-3:2007 2018-08-04 16999 EN 61400-25-2:2007 2018-08-04 21118 EN 50180:2010 2018-08-10 16200 EN 61010-2-040:2005 2018-08-11 22221 EN 61340-5-3:2010 2018-08-20 16064 EN 60836:2005 2018-08-20 25344 EN 62056-6-2:2016 2018-08-23 21017 EN 60384-20:2008 2018-08-26 11709 EN 61800-2:1998 2018-08-26 16898 EN 60384-25:2006 2018-08-26 16895 EN 60384-24:2006 2018-08-26 16353 EN 50289-4-17:2011 2018-08-31 CENELEC - Withdrawals forecast for September 2018 Total:25 WI number Standard reference Forecasted date 12148 EN 60700-1:1998 2018-09-01 22653 EN 60086-1:2011 2018-09-01 21598 EN 60700-1:1998/A2:2008 2018-09-01 14827 EN 60700-1:1998/A1:2003 2018-09-01 23892 EN 61938:2013 2018-09-03 15680 EN 61675-2:1998/A1:2005 2018-09-10 15664 EN 60789:2005 2018-09-10 11692 EN 61675-2:1998 2018-09-10 11712 EN 60598-2-5:1998 2018-09-10 11789 EN 61675-3:1998 2018-09-10 15324 EN 50200:2006 2018-09-14 4226 EN 60601-2-1:1998 2018-09-15 13388 EN 60601-2-23:2000 2018-09-15 13682 EN 60601-2-49:2001 2018-09-15 1

WI number Standard reference Forecasted date 7612 EN 60601-2-25:1995/A1:1999 2018-09-15 5698 EN 60601-2-5:2000 2018-09-15 5724 EN 60601-2-18:1996 2018-09-15 13125 EN 60601-2-18:1996/A1:2000 2018-09-15 14389 EN 60601-2-51:2003 2018-09-15 4239 EN 60601-2-25:1995 2018-09-15 14390 EN 60601-2-1:1998/A1:2002 2018-09-15 21424 EN 61174:2008 2018-09-23 15015 EN 60862-1:2003 2018-09-24 21288 EN 62317-13:2008 2018-09-24 21727 EN 61800-7-202:2008 2018-09-25 2

CENELEC - Available documents withdrawn between 2018-07-01 and 2018-07-31 Standard reference Withdrawal date English title CLC/TS 50562:2011 2018-07-31 Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems EN 122340:2002 2018-07-10 Sectional Specification: Radio frequency coaxial connectors - Series MMCX EN 50066:1992 2018-07-11 Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles EN 60068-2-60:1996 2018-07-23 Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test EN 60079-28:2007 2018-07-01 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation EN 60079-7:2007 2018-07-31 Explosive atmospheres - Part 7: Equipment protection by increased safety "e" EN 60118-0:1993 2018-07-14 Hearing aids - Part 0: Measurement of EN 60118-0:1993/A1:1994 electroacoustical characteristics EN 60118-1:1995 2018-07-14 Hearing aids - Part 1: Hearing aids with EN 60118-1:1995/A1:1998 induction pick-up coil input EN 60118-2:1995 2018-07-14 Hearing aids - Part 2: Hearing aids with EN 60118-2:1995/A2:1997 automatic gain control circuits EN 60118-6:1999 2018-07-14 Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids EN 60143-1:2004 2018-07-30 Series capacitors for power systems - Part 1: General EN 60143-3:1998 2018-07-14 Series capacitors for power systems - Part 3: Internal fuses EN 60320-1:2001 2018-07-29 Appliance couplers for household and similar general purposes - Part 1: EN 60320-1:2001/A1:2007 General requirements EN 60335-2-8:2003 2018-07-20 Household and similar electrical EN 60335-2-8:2003/A1:2005 appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers EN 60335-2-8:2003/A2:2008 and similar appliances Replaced by EN 50562:2018 EN 61169-52:2015 See Resolution D160/C045 EN 60068-2-60:2015 EN 60079-28:2015 EN 60079-7:2015 EN 60118-0:2015 EN 60118-0:2015 EN 60118-0:2015 EN 60118-0:2015 EN 60143-1:2015 EN 60143-3:2015 EN 60320-1:2015 EN 60335-2-8:2015 EN 60455-2:1999 2018-07-30 Resin based reactive compounds used EN 60455-2:2015 1

Standard reference Withdrawal date English title for electrical insulation - Part 2: Methods of test EN 60601-2-66:2013 2018-07-31 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems EN 60793-2-30:2013 2018-07-30 Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres EN 61010-031:2002 EN 61010-031:2002/A1:2008 2018-07-03 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test EN 61300-3-35:2010 2018-07-30 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection EN 61804-3:2011 2018-07-14 Function Blocks (FB) for process control - Part 3: Electronic Device Description Language (EDDL) EN 62343-1-2:2008 2018-07-30 Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C) EN 62386-201:2009 2018-07-01 Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) HD 50573-5-57:2014 2018-07-17 Co-ordination of electrical equipment for protection, isolation, switching and control HD 60364-5-53:2015 2018-07-17 Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear Replaced by EN 60601-2-66:2015 EN 60793-2-30:2015 EN 61010-031:2015 EN 61300-3-35:2015 EN 61804-3:2015 EN 62343-1-2:2015 EN 62386-201:2015 HD 60364-5-53:2015 HD 60364-5-53:2015 2

2024 © homedocbox.com Privacy Policy | Terms of Service | Feedback