Hire Depots - Nationwide - www.cwplant.co.uk In partnership with SPE 36 POWER TROWEL Reliable robust machine suitable for finishing large areas of freshly laid concrete. Adjustable handle Heavy duty clutch Includes pan and combination blades Precision balanced Rugged construction CODE No. CPR-TRO36Q 24 EDGING TROWEL HAND FLOATS These compact machines will finish right up to the edge and are ideal for finishing around plumbing pipes and specialist floors. Fuel: Petrol Power Source: Honda GX160/270 Power Output: 8.5hp / 6.3kw Float Blade Size: 10 x 14 / 250mm x 360mm Finish Trowel Size: 6 x 14 / 150mm x 360mm Combination Blade Size: 8 x 14 / 200mm x 360mm Float Pan: 36.5 / 930mm Operating Weight: up to 86kg 7 103.2 Precision balanced for smooth, easy operation Folding handle for easy storage Chrome plating for easy clean up Includes pan and combination blades FLOOR PREPARATION Pedestrian Floats 7 103 CODE No. CPR-TRO24 Type: Engine: Power Output: Combination Blade Size: Float Pan: Operating Weight: Petrol Honda 4.8hp / 3.6kw 4.75 x 9 / 120mm x 230mm 24 / 600mm up to 57kg CODE No. DESCRIPTION WEEK CPR-FLT EASY FLOAT POA CPR-FMF MAGNESIUM BULL FLOAT POA CPR-FBB BIG BLUE POA CPR-FFB FRESNO BROOM POA CPR-BEAM HAND BEAM TAMP POA 60
MAGIC SCREED 9.0 50.0 Various blades available FLOOR PREPARATION A levelling device that will strike off concrete, aggregates, fibres and float the surface of the concrete giving a smooth surface. Fast, light and effective. It is specially designed to enable a single operator to efficiently level an entire area. CODE No. WEEK ROLLER STRIKERS VIBRATING BEAM SCREED BLADE FOR THE ABOVE AVAILABLE IN VARIOUS SIZES CPR-SCREEM POA PER METRE POA 5.9 100 7.75 89.0 An accurate and efficient way to compact and level concrete slabs, rafts and floors up to 150mm/6" thick. The unit is designed so that maximum vibration is concentrated on the leading beam with lighter vibration applied to the following beam to achieve a smooth finish. CODE No. CPR-SCREE6 PER METRE POA Engine Fuel Capacity Est. Running Time Weight (dry) Weight (operating) The roller striker is a fast and efficient unit for screeding areas of freshly poured concrete. Friction enables the Faststrike to gather and carry surplus material during concrete placement leaving a smooth finish. This creates a very strong floor ready for power travelling, if required. CODE No. CPR-RSKT INDENT ROLLER 1.3hp, 35cc, recoil start, air cooled, single overhead cam cylinder 0.17 gal (0.65L) 1.1hrs @ 7000rpm 27.9lbs +blade (12.7kg +blade) 29.6lbs +blade (13.5kg +blade) High quality brass indent roller used for applying non-slip surface to concrete slab. Often referred to as a spiked roller, the indent roller will leave a durable non-slip surface of indented pyramids that will not 'scrub' out. CODE No. CPR-ROL WEEK 35.70 Width 30cm/12" 30cm/12" Telephone your nearest Hire Depot 61 61
11 Hire Hire Depots - Serving - Nationwide South - www.cwplant.co.uk and North of England PLANER 200 The BEF 200 is a strong and reliable machine suitable for a variety of applications including the cleaning and texturing of concrete and asphalt. This planer comes with a 50mm (2 ) dust extraction port and is virtually dust-free when operated with an SPE vacuum. Screw-type raise and lower control Large diameter wheels for excellent mobility and stability Front wheels protected from debris 6.6 101.3 CODE No. CPR-110V Type: Petrol Electric Power Output: 5.5hp (4.1kw) 3hp (2.2kw) Voltage: - 110v Length: 940mm (37 ) Width: 340mm (13.4 ) Height: 905mm (35.6 ) FLOOR TILE STRIPPER 230 CODE No. LE-TILE This compact, easy-to-use floor tile stripper offers the operator a solution for commercial and domestic applications. The MS 230 has an adjustable handle to suit different body types. 13.5 79.5 Fully adjustable chassis to adjust blade angle Simple clamp arrangement for quick and easy blade change Power Output: 2hp (1.5kw) Work Width: 230mm (9 ) Height: 787mm (31 ) Length: 685mm (27 ) Weight: 45kg Width: 380mm (15 ) BEF 200N SCARIFIER The BEF 200N has a rigid and compact design so it can be used to clean and texture concrete and asphalt. It can also be used to remove paint, rust, grease, ice deposits, line markings, and concrete laitance. The large diameter of the wheels enable excellent mobility and stability. Dust-free when operated with a suitable vacuum Front wheels protected from debris Non-slip finishes Type: Petrol Electric Power Output: 5.5hp (4.1kw) 3hp (2.2kw) Voltage: - 110v Length: 990mm (39 ) Width: 360mm (14 ) Height: 942mm (37 ) PLANER 275 This planer offers the user a machine of compact proportions which gives outstanding performance rates in preparing and planning concrete floors. The BEF 275 comes with a 50mm (2 ) dust extraction port and is virtually dust-free when operated with the SPE 316 vacuum. Large diameter wheels for excellent mobility and stability Forward mounted cutter drum for perfect balance Handle height is fully adjustable for operational control 9.58 106 CODE No. CPR-PL275P Type: Petrol Power Output: 11hp (8.2kw) Length: 1220mm (48 ) Width: 511mm (20.1 ) Height: 900mm (95.4 ) Weight: 145kg FLOOR TILE STRIPPER 330 The MS 330 offers the operator a totally effortless high-performance floor tile stripper for the removal of materials in the toughest possible conditions CODE No. LE-TILEHD Blade angle is adjustable to suit application All support wheels are power driven to provide excellent forward traction Manually operated positive drive clutch for forward drive / free wheel 9.4 90.4 Power Output: 3hp (2.2kw) Work Width: 330mm (13 ) Height: 1000mm (39.4 ) Length: 1100mm (43.3 ) Weight: 132kg Width: 480mm (18.9 ) 203 62 54
PLANER 320 The BEF 320 is a robust, self-propelled, hydrostatically-driven machine having infinitely variable speed control to each independent drive wheel motor. This allows the planer a forward and reverse feature which gives the planer the capability to turn around on its own axis. The BEF 320 comes with a 50mm (2 ) dust extraction port and is virtually dust-free when operated with the SPE 316 vacuum. CODE No. CPR-PL320D Type: Diesel Power Output: 10hp (7.5kw) Starter: Manual Travel Speed 0-12 (mtr/min) Length: 1230mm (48.4 ) DFG 280 FLOOR GRINDER Power Output: 3hp (2.2w) Length: 1020mm (40 ) 7.8 112 Self-propelled hydrostatic drive Forward and reverse controls Surface textures and max cutter life Up-cutting drum for efficiency Width: 590mm (23.2 ) Height: 1220mm (48 ) Weight: 319kg *Wear charges apply on grinders. DFG 400 FLOOR GRINDER The DFG 280 is the perfect machine for every tight spot and small corner. It has edge grinding capabilities on both sides and the folding handles makes it a compact and reliable grinder. The DFG 280 is suitable for the grinding of most concrete and terrazzo floors and is also suitable for the removal of latex, adhesive and old floor coatings. 10 grinding head Built in lifting handles Wall Walking roller bearing for edge work Dust free vac port Width: 280mm (11 ) Height: 940mm (37 ) Weight: 44kg DFG 250 FLOOR GRINDER The DFG 250 is a single-head grinder that produces accurate and rapid grinding. It allows for perfect grinding in all types of situations. This machine comes with a 50mm (2 ) dust extraction port and is virtually dust-free when used in conjunction with our range of vacuums. Simple foot pedal to raise or lower machine during use Anti-vibration handle bar mounts Screw type hand wheel allows machine to be set accurately to the surface CODE No. CPR-FGP2 The DFG 400 is an easy-to-use and reliable general purpose floor grinder. The twin grinding heads, driven by heavy duty gearboxes, ensure high productivity. The floor grinder comes with a 50mm (2 ) dust extraction port and is virtually dust-free when used in conjunction with our range of vacuums. Handle height is adjustable for operator comfort Heavy duty gearbox drive system Screw-type hand wheel to level machine to surface Large diameter wheels for excellent mobility and stability 1.2 CODE No. CPR-FGE 100 Power Output: 3hp (2.2kw) Length: 820mm (32.3 ) 9.4 90.4 Type: Petrol Power Output: 13hp (9.7kw) Height: 1040mm (41 ) Length: 1120mm (44.1 ) Weight: 122kg Width: 670mm (26.4 ) Width: 560mm (22 ) Height: 700mm (27.6 ) Weight: 86kg FLOOR PREPARATION Telephone your nearest Hire Depot 63 63
11 Hire Hire Depots Depots - Serving - Nationwide South - and www.cwplant.co.uk North of England DFG 460 FLOOR GRINDER The DFG 460 grinds to a polished finish and is ideally suited for the grinding of most types of concrete floors. To aid operator comfort the handle bars are adjustable and anti-vibration. This machine is efficient, powerful and portable. The grinder comes with a 50mm (2 ) dust extraction port and is virtually dust-free when operated with the SPE 316 vacuum CODE No. CPR-FGE3 Power Output: 3hp (2.2kw) Length: 1040mm (41 ) Mixit 25 The Mixit 25 has been developed to mix a wide range of materials promptly and effectively. These include cement, adhesives, liquid plastics, paints and powders etc. The machine is both robust and portable, offering the user high output and single-handed operation. Disposable mixing container Light and portable Quickly disassembles for transportation in a van or car Fully protected against overload. CODE No. CPR-MIX25 Heavy duty gearbox drive system Adjustable height, anti-vibration handles Self-levelling head design Large diameter wheels for excellent mobility and stability 2.85 89 Width: 470mm (18.5 ) Height: 1080mm (42.5 ) Weight: 117kg 73.3 Power Output: 1hp (0.75kw) Length: 700mm (27.6 ) Height: 813mm (32 ) Capacity: 32 litres Weight: 43kg Width: 460mm (18.1 ) EASY GRIND Attachment to convert 9 hand-held grinders into a trolley mounted surface grinding system. This allows the operator to stand whilst using the tools on floor surfaces. This attachment device aids operator comfort CODE No. CPR-GRIND Power Output: 11hp (8.2kw) Length: 1220mm (48 ) Width: 511mm (20.1 ) Mixit 60 This forced-action pan mixer has been developed specifically for heavy duty industrial applications. As the mixing head is lowered, the machine automatically starts and then stops when the head is raised. Automatic stop/start when mixing head is lowered/raised Safety lock for mixing head 85.9 CODE No. CPR-MIX60 Power Output: 3hp (2.2kw) Capacity: 60 litres Length: 1200mm (47.2 ) Height: 900mm (95.4 ) Weight: 145kg Width: 700mm (27.6 ) Height: 1100mm (43.3 ) Weight: 275kg 203 64 54
VACUUM 316 Industrial surface preparation equipment requires efficient, heavy-duty, high-volume collection of dust and debris. It is essential the correct vacuum equipment is used. Our range of industrial vacuum cleaners provides the operator with robust, powerful machines which are capable of controlling dust in the most demanding conditions Practical drop bin for easy disposal of debris. Wet conversion kit available. CODE No. VAC-316 95.6 Power Output: 4hp / 3kw Airflow 8640 l/min Height: 1530mm (60.2 ) Weight: 66kg FOR DIAMOND FLOOR GRINDER AND STR701 ACCESSORIES - SEE NEXT PAGE PERGO SWM 620P-Grout Power Sponge These machines are for cleaning cements and grouts from quarry tiles, external paviers, natural stones and granite sets. The machine is used to pass over the newly grouted area and to sponge off any residue, leaving a clean surface and compact joint. The system improves the joint quality whilst avoiding washing away the cement in the joint. 76 WEEK POA Power: 4hp Weight: 62kg Height: 88cm Sponge width: 36cm Vibration level: 2.5m/s Sponge belts available for sale upon request VACUUM 380 This is a single phase industrial vacuum cleaner with three collector motors. It is suitable to operate safely in any environment or application where there are large quantities of dust to be vacuumed due to the use of three class H filters and the fully automatic cleaning system of the filter. The new SPE Auto Clean system allows automatic cleaning without interrupting the vacuum cleaning process. This ensures a constant and efficient suction power. Each of the fitted filters is periodically cleaned by the vibration action 3 collector motors Cleaning cycle every 3 minutes for 15 seconds Vibration cleaning cycle CODE No. VAC-HC Type: Electric Power Output: 4hp / 3kw Filter Shaker: Auto Filter Class: H Airflow: 7500 l/min Max Depression: 230m Bar STR701 MULTIPURPOSE CODE No.. CPR-PL701 95.6 Capacity: 50 litres Length: 800mm (31.5 ) Width: 600mm (23.6 ) Height: 1180mm (46.5 ) Weight: 65kg The STR701 is a rotary preparation machine. Simple, safe,comfortable to operate and highly effective. Low noise levels along with the complete absence of fumes, vibration and dust makes this machine ideal for refurbishment and renovation. Multi-purpose preparation system Thermal overload protection Safety start mechanism Power Output: 2hp / 1.5kw Length: 580mm (22.8 ) Width: 470mm (18.5 ) Height: 1250mm (49.2 ) Weight: 61kg 1.3 92.7 FLOOR PREPARATION Telephone your nearest Hire Depot 65 65
DIAMOND FLOOR GRINDER & STR701 ACCESSORIES GRINDING PLATES STR701 ACCESSORIES 11 Hire Hire Depots Depots - Serving - Nationwide South - and www.cwplant.co.uk North of England Part No. 6401 Part No. 6402 Part No.6403Y SALE THE AGGRESSOR PCD SERIES The Aggressor PCD Series removes all types of stubborn coatings such as paint, varnish, black tar adhesive and water proofing etc. This tooling series will provide you with the power needed to get through the toughest of coatings. SALE TMAG METAL BOND DIAMONDS Premium grade 250mm 16 segment (blue) Removal and grinding of most types of concrete fl oor in preparing for follow on coatings. General all purpose head for most grinding works. Can be used wet or dry. Hard bond premium grade 250mm 16 segment (black) Same application as 6403 standard grade but gives longer life on softer substrates. Can be used wet or dry Standard grade 250mm 16 segment (yellow) Economical grinding of concrete in preparation for follow on coatings. Excellent cost per square metre * Other grinding plates available Metal bond diamond grinding tools for coating removal, aggressive concrete grinding and surface preparation, for all types of floors. POA POA Heavy duty double sided resin bonded silicon carbide sanding discs. Standard double sided resin bonded silicon carbide sanding discs Sanding, grinding and keying of coatings, wooden floors and latex. Laitance removal from concrete floors Resin bonded silicon carbide grinding blocks to fi t the block drive plate PN P53530 General grinding of concrete, latex and screed Diamond block Rapid grinding of concrete, keying of power fl oated concrete. Removal of trowel marks and coatings. Fits to P53530 Drive Plate Double sided steel disc coated with tungsten carbide. Long life and excellent self cleaning properties Grinding and texturing of concrete floors. Removal of rubber, ice dirt and ATA adhesive. Removal of laitance from concrete floors. 3 disc drive plate Grinding and texturing of concrete floors. Planetary action provides a smooth profi led finish. Cleaning/Scarifying brush with long life silicon carbide impregnated nylon bristles The cleaning of block paving, concrete and non glazed hard fl oor tiles SALE POA SALE POA 66