Hi-Vi search Loudspeakers For complete specifications: www.swanspeaker.com Model (width x height) Imp. W Fs Hz Qts Ltrs Power Watts db Fre quency Range VC Ø mm c. Box Li ters S / V F3 Hz S / V Price Each Isodynamic Rib bon Tweet ers RT1.3 88mm x 102mm flange 6 - - - 10 92 2.5k-30kHz Neodymium magnet $42.95 RT1.3WE 120mm round flange 6 - - - 10 92 2.5k-20kHz Neodymium magnet $37.85 RT1C-A 120mm round flange 5 - - - 15 94 4.5k-23kHz Neodymium magnet $40.90 RT2II 145mm x 166mm rect an gu lar flange 8 - - - 30 93 2k-27kHz Neodymium magnet $108.35 RT2C-A 176mm round flange 8 - - - 30 93 3k-40kHz Neodymium magnet $100.05 RT2-Pro 220mm x 166mm rect an gu lar flange 8 - - - 30 99 2.3k-35kHz Neodymium magnet $246.35 RT8II 160mm x 220mm rect an gu lar flange 8 - - - 30 95 1.7k-27kHz Neodymium magnet $171.10 1" Fab ric Dome Tweet ers T20 52mm round flange, 20mm tex tile dome 4/8 2000 - - 15 91/89 4k-20kHz 19 Small tex tile dome $12.75 Q1R 116mm round flange, shielded 6 1000 - - 15 89 2.5k-20kHz 28 Shielded mag net $22.70 TN28 46mm Ø x 99mm Top Mount 6 1300 - - 15 90 3k-25kHz 28 Top mount, shielded $25.95 TN25 54.5mm square with cham ber 5 1500 - - 15 90 3k-21kHz 25 Small flange, shielded $17.65 K1 116mm round alu mi num flange, shielded 5 800 - - 15 92 2.5k-25kHz 25 Aluminum face plate $13.80 2" Fab ric Dome Midranges DMN-A 116mm round flange w/cham ber, neo 5 800 - - 60 93 1kHz-10kHz 50 117mm deep bul let ch. $76.55 DMB-A 145mm round flange, shielded 5 700 - - 80 92 800Hz-10kHz 50 43mm D., rough dome $28.40 Small Full Range Speak ers, Shielded, Metal Al loy Cones B1S 36mm square flange, cop per color cone 8 220 0.56 0.04 1 79 250Hz-20kHz 19 6 cu bic inch 270 $10.10 A2S 53mm square flange, shielded, sil ver color 8 153 1.27 0.2 10 78 150Hz-15kHz 25 0.5-2 150 $23.25 B2S 53mm square flange, shielded, cop per color 8 152 1.2 0.2 10 78 150Hz-15kHz 25 0.5-2 150 $23.50 B3S 78mm square flange, shielded, cop per color 8 80 0.93 1.6 15 80 80Hz-8kHz 20 0.5-2 80 $12.20 B3N 90mm round flange, shielded, cop per color 8 77 0.86 1.7 15 81 80Hz-8kHz 20 0.5-2 80 $10.60 C3N-III 90mm round Paper cone, shielded 8 130 0.96 0.86 15 84 130Hz-10kHz 20 0.5-2 130 $10.60 "D" Se ries Min eral Filled Poly propy lene Cones, Large Di am e ter Voice Coils D6.8 174mm round flange, cast frame 8 42 0.40 13.5 60 85 40Hz-4kHz 76 7 / 12 74 / 42 $107.10 "F" Se ries Kevlar/Pa per Cones, Cast Frames, Shielded Mag nets, Yel low Cones F5 154mm round flange, phase plug 8 52 0.33 7.3 35 86 65Hz-8kHz 25 2 / 4 111 / 63 $32.35 F6 197mm round flange, phase plug 8 45 0.35 16.4 45 88 50Hz-5kHz 25 5 / 11 92 / 51 $44.70 "L" Se ries Wo ven Kevlar Cones L5-8R 5" pin cush ion frame, shielded 8 60 0.71 7 30 85 60Hz-5kHz 25 8 / - 75 / - $21.15 L6-4R 6" cast frame with phase plug, shielded 8 50 0.4 14.7 30 88 50Hz-4kHz 30 5 / 12 106 / 55 $39.25 L6-6R 6" cast frame, shielded 8 45 0.43 20 30 88 45Hz-5kHz 30 6 / 12 89 / 55 $38.55 "M" Se ries Mag ne sium/alu mi num Al loy Cones, Cop per Color Cones M3N 90mm round flange, shielded mag net 8 91 0.80 1.5 15 82 95-7kHz 20 2.2 / - 100 $13.25 M4N 116.5mm round flange, shielded magnet 8 69 1.08 4.3 30 82 69-4kHz 20 4 / - 73 / - $17.50 M5N 144mm round flange, shielded magnet 8 47 0.35 11.3 35 87 53Hz-5kHz 25 3.5 / 6 95 / 59 $22.85 M5a 140mm round flange, shielded mag net 8 48 0.34 11.2 35 87 65Hz-3kHz 25 3 / 5 100 / 63 $28.60 M6a 174mm round flange, shielded mag net 8 46 0.38 13.6 45 88 50Hz-3kHz 25 9 / 14 86 / 53 $38.10 M8a 215mm round flange 8 30 0.43 50.3 80 87 30Hz-2kHz 35 29 / 40 49 / 32 $53.05 Autosound Speakers D620 Component System with 6.5" Kevlar/Pa per cone with 3" voice coil and shal low frame; 28mm tex tile dome tweeter, cross overs, grills, hardware $256/pr D630 Component System with 6.5" Kevlar/Pa per cone woofer with 3" voice coil, 50mm tex tile dome midrange, 28mm tex tile dome tweeter, x-overs, etc $476/pr FR600 Component System with 6.5" Kevlar/Pa per com pos ite cone woofer and Isodynamic Rib bon tweeter, in cludes driv ers, grills, cross overs, hardware $186/pr F1500 Component System with 5" Kevlar/Pa per com pos ite cone woofer and tex tile dome tweeter, in cludes driv ers, grills, cross overs and hardware $176/pr F1600 Component System with 6.5" Kevlar/Pa per com pos ite cone woofer and tex tile dome tweeter, in cludes driv ers, grills, cross overs & hard ware $186/pr CF240 4" co ax ial speaker with grill, Pair 4 - - - 30 90 85Hz-23kHz - - - $66/pr CF250 5" co ax ial speaker with grill, Pair 4 - - - 40 91 60Hz-23kHz - - - $72/pr CF260 6" co ax ial speaker with grill, Pair 4 - - - 50 92 45Hz-23kHz - - - $76/pr SP10 246mm round flange, subwoofer 4 34 0.57 17.1 500 84 40Hz-500Hz 76 32 40 $240.75
RT1.3 Ribbon 88 x 102mm flange 2.5k-30kHz Flat Impedance curve RT1.3WE Ribbon 120mm Round flange 4.5k-20kHz Flat impedance curve Nom. Power 10 Watts 2.83V / 1m 92 db Neodymium 0.2 kg Nom. Power 10 Watts 2.83V / 1m 92 db Neo dym ium 0.2 kg RT1C-A Ribbon 120mm Round flange 4.5k-23kHz Flat impedance curve RT2II Ribbon 160 x 186mm flange 2k-27kHz Flat Impedance curve Znom 5 ohm atts 2.83V / 1m 94 db Neo dym ium 0.2 kg Nom. Power 30 Watts 2.83V / 1m 93 db Neodymium 0.87 kg
RT2C-A Ribbon 176mm Round flange 3k-40kHz Flat Impedance curve RT2-Pro Ribbon 220 x 166mm flange 2.3k-35kHz Flat Impedance curve Znom 8 ohm Nom. Power 30 Watts 2.83V / 1m 93 db Mag net Sys - tem Neo dym ium Nom. Power 30 Watts 2.83V / 1m 99 db Neo dym ium 1.06 kg RT8II Ribbon Nom. Power 30 Watts 2.83V / 1m 95 db Neo dym ium 1.1 kg 160 x 220mm flange 1.7k-27kHz Flat Impedance curve T20-8 Tweeter 20mm fabric dome 53mm flange (2") 36mm cut out 10mm depth 4 or 8 ohm fs 2000 Hz 6.8 ohm VC Ø 20 mm 2.83V / 1m 89 db
Q1R Tweeter Fabric dome tweeter 116mm flange TN28 Tweeter Top Mount Fabric dome tweeter fs 1000 Hz Nom. Power 89 W 5.3 ohm VC Ø 28 mm 2.83V / 1m 89 db 0.8 kg fs 1300 Hz 5.1 ohm VC Ø 28 mm 2.83V / 1m 90 db 0.14 kg TN25 Tweeter Fabric dome tweeter 54.5mm square flange Shielded, w/ chamber K1 Tweeter Fabric dome tweeter 116mm round flange Znom 5 ohm fs 1500 Hz 4.6 ohm 2.83V / 1m 90 db 0.09 kg Znom 5 ohm fs 800 Hz 4.6 ohm 2.83V / 1m 92 db 0.9 kg
DMN-A Midrange 2" fabric dome Chambered back 116mm round flange Znom 5 ohm fs 800 Hz Nom. Power 60 W 4.3 ohm VC Ø 50 mm 2.83V / 1m 93 db 0.4 kg DMB-A Midrange 2" textured fabric dome 145mm round flange Znom 5 ohm fs 700 Hz Nom. Power 80 W 4.3 ohm VC Ø 50 mm 2.83V / 1m 92 db 1.6 kg B1S Full Range 1" magnesium/aluminum cone full range (copper) Foam surround 270Hz-20kHz 36mm square flange 32.5mm cut out 13.1mm depth A2S Full Range 2" magnesium/aluminum cone full range (copper) 150Hz-15kHz 53mm square flange 48mm cut out 30.5mm depth fs 220 Hz Nom. Power 2 W Qms 2.57 Qes 0.68 Qts 0.56 0.5 g Cms 1057 µm/n Sd 5 cm 2 2.3 Tm 0.04 ltrs 0.95 mm peak VC Ø 19 mm 2.83V / 1m 79 db 0.03 kg c. 6 cu bic inch sealed, f3 270 fs 153 Hz Nom. Power 10 W Qms 7.33 Qes 1.53 Qts 1.27 1.5 g Cms 707 µm/n Sd 13 cm 2 2.5 Tm 0.2 ltrs 1.5 mm peak 2.83V / 1m 78 db 0.12 kg c. 0.5-5 li ters sealed, f3 150
B2S Full Range 2" magnesium/aluminum cone full range (copper) 150Hz-15kHz 53mm square flange 48mm cut out 30.5mm depth C3N-III Full Range 3" Paper cone full range 130Hz-20kHz 90mm round flange 71mm cut out 53mm depth fs 152 Hz Nom. Power 10 W Qms 5.69 Qes 1.53 Qts 1.20 1.6 g Cms 689 µm/n Sd 13 cm 2 2.5 Tm 0.2 ltrs 1.5 mm peak 2.83V / 1m 78 db 0.12 kg c. 0.5-5 li ters sealed, f3 150 fs 130 Hz Qms 3.86 Qes 1.27 Qts 0.96 2.06 g Cms 671.6 µm/n Sd 30 cm 2 2.98 Tm 0.87 ltrs 2.6 mm peak 2.83V / 1m 84 db 0.53 kg c. 0.4 li ter sealed 270Hz B3S Full Range fs 80 Hz Qms 4.29 Qes 1.19 Qts 0.93 3.1 g Cms 1260 µm/n 3" magnesium/aluminum cone full range Copper color 80Hz-8kHz 78mm square flange 70mm cut out 53mm depth B3N Full Range Sd 30 cm 2 2.9 Tm fs 77 Hz 1.6 ltrs 3.0 mm peak VC Ø 20 mm Qms 4.48 2.83V / 1m 80 db Qes Qts 1.07 0.86 0.53 kg 3.2 g c.box 0.5-5 li ters sealed, f3 80 Cms 1320 µm/n 3" magnesium/aluminum cone full range Copper color 80Hz-8kHz 90mm round flange 71mm cut out 53mm depth Sd 30 cm 2 3.1 Tm 1.7 ltrs 3.0 mm peak VC Ø 20 mm 2.83V / 1m 81 db 0.55 kg c.box 0.5-5 li ters sealed, f3 80
M3N Full Range 3" magnesium/aluminum cone full range Conex spider, Kapton VC 90Hz-7kHz 90mm round flange 71mm cut out 53mm depth M4N Full Range 4" magnesium/aluminum cone full range Copper color 70Hz-4kHz 116.5mm round flange 93mm cut out 63mm depth fs 91 Hz Qms 3.57 Qes 1.03 Qts 0.80 2.6 g Cms 1172 µm/n Sd 30 cm 2 3.0 Tm 1.5 ltrs 3.0 mm peak VC Ø 20 mm 2.83V / 1m 82 db 0.55 kg c.box 0.5-5 li ters sealed, f3 95 fs 69 Hz Qms 5.39 Qes 1.35 Qts 1.08 4.8 g Cms 1080 µm/n Sd 53 cm 2 3.1 Tm 4.3 ltrs 3.0 mm peak VC Ø 20 mm 2.83V / 1m 82 db 0.60 kg c.box 4 li ters sealed, f3 73 M5N Midbass fs 47 Hz Nom. Power 35 W Qms 6.51 Qes 0.37 Qts 0.35 10.7 g Cms 1051 µm/n 5" Magnesium/ Aluminum alloy cone Stamped steel frame Frequency response 53Hz-5kHz 144mm flange 115mm cut out 91mm depth Sd 87 cm 2 7.5 Tm 11.3 ltrs 2.7 mm peak 2.83V / 1m 87 db 1.5 kg c. Box: 6 ltrs, 1"Ø x 2.3" F3 59 D6.8 Midbass 7" mineral filled polypropylene cone 3" Voice coil 40Hz-4kHz 174mm flange 136mm cut out 76mm depth fs 42 Hz Nom. Power 60 W Qms 3.81 Qes 0.45 Qts 0.40 21.8 g Cms 652 µm/n Sd 121 cm 2 9.5 Tm 13.5 ltrs 4.8 mm peak VC Ø 76 mm 2.83V / 1m 85 db 1.9 kg c. box 12 ltrs, 1.5"Ø x 5", F3 42
F5 Midbass fs 52 Hz Nom. Power 35 W Qms 4.31 Qes 0.36 Qts 0.33 11.5 g Cms 828 µm/n 5.5" Kevlar /Paper cone Phase plug 65Hz-8kHz 154mm flange 116.5mm cut out 89mm depth Sd 79 cm 2 8.3 Tm 7.3 ltrs 2.7 mm peak 2.83V / 1m 86 db 1.6 kg c. Box: 4 ltrs, 1"Ø x 4" F3 63 F6 Midbass fs 45 Hz Nom. Power 45 W Qms 3.91 Qes 0.38 Qts 0.35 18.3 g Cms 658 µm/n 7" Kevlar /Paper cone Phase plug Frequency response 50Hz-5kHz 197mm flange 149mm cut out 92mm depth Sd 139 cm 2 9.0 Tm 16.4 ltrs 4.3 mm peak 2.83V / 1m 88 db 2.1 kg c Box: 11 ltrs, 1.5"Ø x3.75" F3 L5-8R Midbass fs 60 Hz Nom. Power 30 W Qms 7.0 Qes 0.78 Qts 0.71 7.87 g Cms 800 µm/n 5.5" Woven kevlar cone woofer stamped steel frame 60Hz-5kHz 132.2mm flange 116.5mm cut out 77.5mm depth Sd 80 cm 2 5 Tm 7 ltrs 3.65 mm peak 2.83V / 1m 85 db 1.35 kg c. Box: 8 ltrs sealed F3 75 L6-4R Midbass Znom 4 ohm fs 50 Hz Nom. Power 30 W Qms 3.86 Qes 0.44 Qts 0.4 3.6 ohm 17.3 g Cms 588 µm/n 6.5" Woven kevlar cone woofer w/phase plug 450Hz-5kHz 170mm flange 146.4mm cut out 95.7mm depth Sd 133 cm 2 6.6 Tm 14.7 ltrs 4.3 mm peak VC Ø 30 mm 2.83V / 1m 88 db 1.77 kg c. Box: 12 ltrs,1.5" x 4", F3 55
L6-6R Midbass 6.5" Woven kevlar cone woofer 45Hz-5kHz 170mm flange 146.4mm cut out 95.7mm depth M5a Midbass 5" Magnesium/ Aluminum alloy cone Frequency response 54Hz-8kHz 140mm flange 116mm cut out 89.2mm depth fs 45 Hz Nom. Power 30 W 5.2 ohm Qms 8.08 Qes 0.49 Qts 0.43 15.2 g Cms 806 µm/n Sd 130 cm 2 7 Tm 20 ltrs 4 mm peak VC Ø 30 mm 2.83V / 1m 88 db 1.77 kg c. Box: 12 ltrs,1.5"x4", F3 55 fs 48 Hz Nom. Power 35 W Qms 6.71 Qes 0.36 Qts 0.34 10.8 g Cms 1038 µm/n Sd 87 cm 2 7.6 Tm 11.2 ltrs 2.7 mm peak 2.83V / 1m 87 db 1.6 kg c. Box: 5 ltrs, 1"Ø x 2.6" F3 63 M6a Midbass 7" Magnesium / Aluminum alloy cone Frequency response 50Hz-5kHz 174mm flange 148mm cut out 95mm depth fs 46 Hz Nom. Power 45 W Qms 3.94 Qes 0.42 Qts 0.38 13.6 g Cms 874 µm/n Sd 139 cm 2 7.8 Tm 21.9 ltrs 4.3 mm peak 2.83V / 1m 88 db 2.0 kg c. Box: 14 ltrs, 2"Ø x 5" F3 53 M8a Woofer 8" Magnesium / Aluminum alloy cone Copper color cone Frequency response 30Hz-2kHz 215mm flange 187mm cut out 99mm depth fs 30 Hz Nom. Power 80 W Qms 4.90 Qes 0.47 Qts 0.43 35.1 g Cms 773 µm/n Sd 214 cm 2 9.6 Tm 50.3 ltrs 5.8 mm peak VC Ø 35 mm 2.83V / 1m 87 db 2.5 kg c. Box: 40 ltrs, 2" x 5.1" F3 32
SP10 Subwoofer Znom 4 ohm fs 34 Hz Nom. Power 500 W 3.4 ohm Qms 4.83 Qes 0.65 Qts 0.57 235 g Cms 91.4 µm/n 10" Subwoofer with double layer mica film cone Large roll rubber surround 261mm flange, 236mm cut out and 145mm depth 15.5mm X-max peak! For Home or Autosound applications For Home: 25Hz in 1.1 cu bic foot sealed with KG5230. For Car: 15Hz in 1.1 cu bic foot sealed box (with +6dB of cabin gain) db Sd 363 cm 2 16.6 Tm 17.1 ltrs 15.5 mm pk F1500 5-1/4" Autosound System Kevlar/Paper composite cone with phase plug Ferrofluid cooled fabric dome tweeter, flush or surface Open geometry cast frame, several screw hole options Decorative woofer grill included, tweeter includes grill Impedance: 4 ohm Frequency response: 50Hz to 25kHz Nominal power handling: 40W Sensitivity: 86dB 12dB passive x-over @ 4.5kHz (125mm x 95mm x 35mm) 132.5mm woofer frame diameter (5.2") 120mm woofer cut out hole size (4.7") 55.5mm depth (2.2") Grill dimensions: 159mm x 20mm (6.25" x 0.79") 6 0-6 -12-18 -24-30 -36 5 Hz 10 50 100 500 1 K 5 K 10 K 20 K Simulated car response F1600 6-1/2" Autosound System Kevlar/Paper composite cone with phase plug Ferrofluid cooled fabric dome tweeter, flush or surface Open geometry cast frame, several screw hole options Decorative woofer grill included, tweeter includes grill Impedance: 4 ohm Frequency response: 45Hz to 25kHz Nominal power handling: 50W Sensitivity: 88dB 12dB passive crossover (125mm x 95mm x 35mm) 166mm woofer frame diameter (6.53") 150mm woofer cut out hole size (5.9") 66mm depth (2.6") Grill dimensions: 173mm x 22mm (6.8" x 0.87") FR600 6-1/2" Autosound System Kevlar/Paper composite cone with phase plug Isodynamic ribbon tweeter, use flush or surface mount Open geometry cast frame, several screw hole options Decorative grill included, tweeter includes grill Impedance: 4 ohm Frequency response: 45Hz to 40kHz Nominal power handling: 50W Sensitivity: 88dB 12dB passive crossover (125mm x 95mm x 35mm) 166mm woofer frame diameter (6.53") 150mm woofer cut out hole size (5.9") 66mm depth (2.6") Grill dimensions: 173mm x 22mm (6.8" x 0.87")
D620 6-1/2" 2-way Autosound System German crafted 6.5" Paper/Kevlar fiber cone Large 3" diameter voice coil for increased power handling and control Shallow woofer moutning depth of 61mm (2.4") 1" Textile dome tweeter, use either as flush mount or with wedge mount 12/18dB 2-way 2.2kHz crossover Multiply tweeter connections to adjust tweeter output levels Decorative metal grill In cludes screws, spac ers and gaskets Power (RMS/MAX) 60W / 120W Fre quency re sponse 60Hz-20kHz 86dB (1W/1m), Nominal Impedance 4 ohm D630 6-1/2" 3-way Autosound System German crafted 6.5" Paper/Kevlar fiber cone Large 3" diameter voice coil for increased power handling and control 50mm soft dome midrange, flush mount 1" Textile dome tweeter, use either as flush mount or with wedge mount German fabric uses for tweeter and midrange Shallow woofer moutning depth of 61mm (2.4") 3-way 512Hz & 5.3kHz crossover, 12/18/12 db Decorative metal grill In cludes screws, spac ers and gaskets Power (RMS/MAX) 60W / 120W Fre quency re sponse 60Hz-20kHz 86dB (1W/1m), Nominal Impedance 4 ohm CF150 5.25" Autosound Coaxial Rigid ceramic polypropylene talc cone Ferrofluid cooled fabric dome tweeter Decorative rubber boot covers the woofer magnet Decorative grill included, tweeter grill (also removable) Impedance: 4 ohm Frequency response: 60Hz to 23kHz Nominal power handling: 40W Sensitivity: 91dB Internal crossover 138mm frame diameter (5.43") 116mm cut out hole size (4.57") 62mm depth (2.44") Grill dimensions: 158mm x 22mm (6.22" x 0.87") CF160 6" Autosound Coaxial Rigid ceramic polypropylene talc cone Ferrofluid cooled fabric dome tweeter Decorative rubber boot covers the woofer magnet Decorative grill included, tweeter grill (also removable) Impedance: 4 ohm Frequency response: 45Hz to 23kHz Nominal power handling: 50W Sensitivity: 92dB Internal crossover 156.5mm frame diameter (6.16") 144mm cut out hole size (5.67") 65mm depth (2.56") Grill dimensions: 172.5mm x 22mm (6.79" x 0.87")