Vägutrustning Permanenta vägmärken Del 3: Kantstolpar och retroreflektorer

Similar documents
Anläggningsmaskiner System för riskdetektion och visuella hjälpmedel Utförandekrav och provning (ISO 16001:2008, IDT)

Järnvägar Bromsindikatorer Del 1: Indikatorer för tryckluftsbromsar

Livsmedelsmaskiner Mekaniska rygghuggare för slakterier Säkerhets- och hygienkrav

Ljus och belysning Sportbelysning. Light and lighting Sports lighting SWEDISH STANDARDS INSTITUTE

Skorstenar Krav för metallskorstenar Del 1: Systemskorstenar. Chimneys Requirements for metal chimneys Part 1: System chimney products

Explosiv atmosfär Bestämning av explosionspunkt hos brännbara vätskor. Determination of explosion points of flammable liquids

Teknisk specifikation SIS-ISO/TS :2010 Publicerad/Published: Utgåva/Edition: 1 Språk/Language: engelska/english ICS:

Maskinsäkerhet Säkerhetskrav för fluidsystem och deras komponenter Pneumatik

Kyl- och värmepumpsanläggningar Säkerhets- och miljökrav Del 4: Drift, underhåll, reparation och återvinning

Vägutrustning Vägmärken Variabla meddelandeskyltar Del 3: Produktionskontroll

SVENSK STANDARD SS-EN 54-5/A1 2002:2016

Byggnadsbeslag Nödutrymningsbeslag manövrerade med tryck eller tryckplatta Krav och provning

Textil Provningsmetoder för nonwovens Del 14: Omslags våta baksida (ISO :2006)

Vägfordon Fritidsfordon Husvagnar för stationärt bruk Boendekrav relaterade till hälsa och säkerhet

Ergonomi för termiskt klimat Metoder för bedömning av reaktioner hos människan vid kontakt med ytor Del 1: Varma ytor (ISO :2006)

SVENSK STANDARD SS-EN ISO :2006/A1:2014

This document is a preview generated by EVS

Komponenter för lyftsling Säkerhet Del 1: Smidda komponenter av stål, Klass 8. Components for slings Safety Part 1: Forged steel components, Grade 8

Ytegenskaper för vägar och flygfält Provningsmetoder Del 8: Bestämning av tvärgående ojämnhetsindex

Eurokod 3: Dimensionering av stålkonstruktioner Del 1-1: Allmänna regler och regler för byggnader

Lekredskap Stötdämpande underlag för lekplatsens ytbeläggning Bestämning av kritisk fallhöjd

Sterilization of health care products Biological indicators Part 3: Biological indicators for moist heat sterilization processes (ISO :2006)

Lekredskap och stötdämpande underlag Del 1: Allmänna säkerhetskrav och provningsmetoder

Sterilisering av medicintekniska produkter Ångsterilisatorer Små autoklaver. Small steam sterilizers SWEDISH STANDARDS INSTITUTE

Portar Säkerhetsanordningar för maskindrivna portar Krav och provningmetoder

SVENSK STANDARD SS-EN :2012/A1:2016

SVENSK STANDARD SS-EN 54-4/A1:2016

Disk- och spoldesinfektorer Del 1: Allmänna krav, termer, definitioner och provningsmetoder (ISO :2006)

SWEDISH STANDARDS INSTITUTE

Road traffic noise reducing devices Specifications

SWEDISH STANDARDS INSTITUTE

Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004)

Icke aktiva kirurgiska implantat Osteosyntesmaterial Särskilda krav (ISO 14602:1998)

Ballast Geometriska egenskaper Del 11: Bestämning av sammansättningen hos grovkornig återvunnen ballast

Smoke and heat control systems Part 1: Specification for smoke barriers

SVENSK STANDARD SS-EN ISO 13897:2005. Tandvård Amalgamkapslar (ISO 13897:2003) Dentistry Amalgam capsules (ISO 13897:2003)

SVENSK STANDARD SS-EN ISO 8624:2011/A1:2015

SVENSK STANDARD SS-EN :2012/A2:2017


SVENSK STANDARD SS-EN :2005. Rörflänsar Flänsförband Skruvförband Del 3: Klassificering av material för stålflänsar, klassbetecknade

Glass packaging Hand-held crown bottle openers Dimensions


Papper och kartong avsedda för kontakt med livsmedel Sensorisk test Del 2: Bismak

SVENSK STANDARD SS-EN 2256:2004. Aerospace series Aluminium alloy AL-P2618A T852 Hand and die forgings a 150 mm. Fastställd Utgåva 1


SVENSK STANDARD SS-EN 4616:2005. Aerospace series Magnesium alloy MG-C18002 T4 Chill casting. Fastställd Utgåva 1

SVENSK STANDARD SS EN ISO :2009


Maskinsäkerhet Utrustning för mekaniserad parkering av bilar Säkerhets- och EMC-krav

SVENSK STANDARD SS-EN ISO 15652:2005. Båtar Styrsystem för småbåtar med inombordsvattenjetmotorer

SVENSK STANDARD SS-EN :2004

SVENSK STANDARD SS-EN ISO :2007. Anestesi- och ventilationsutrustning Koniska kopplingar Del 2: Gängade belastningsbara kopplingar


SVENSK STANDARD SS-EN ISO :2005. Kvalitetskrav för smältsvetsning av metalliska material Del 2: Omfattande kvalitetskrav (ISO :2005)

Plaströrssystem för självfallsledningar för avloppsvatten PRC Del 1: Rör och rördelar med flexibel koppling

SVENSK STANDARD SS-EN 10021:2007. Allmänna tekniska leveransbestämmelser för järn- och stålprodukter


Kallvalsade smala stålband Toleranser för dimensioner och form


Fönster och dörrar Produktstandard, funktionsegenskaper Del 1: Fönster och ytterdörrar utan egenskaper för brandmotstånd och/eller rökgasläckage

Järn och stål Bestämning av härddjup vid ythärdning

Skyddshandskar för brandmän. Protective gloves for firefighters

SVENSK STANDARD SS-EN ISO 15065:2005. Fästelement Försänkningar för skruvar med sänkhuvud utformat enligt ISO 7721 (ISO 15065:2005)

Glaskärl Halsringar Del 3: 38 normal (ISO :2005) Glass containers Vacuum lug finishes Part 3: 38 regular (ISO :2005)


SVENSK STANDARD SS-EN ISO :2007. Motståndssvetsning Mätning av svetsström Del 4: Kalibreringssystem (ISO :2005)

Transportörer Transportband Elektrisk ledningsförmåga Specifikation och provningsmetod (ISO 284:2003)

Explosiv atmosfär Trycktålig utrustning. Explosion resistant equipment


Brottsförebyggande genom stadsplanering och byggnadsutformning Del 8: Skydd av byggnader och platser mot intrång och angrepp med motorfordon

Blodtrycksmätare för indirekt blodtrycksmätning. Del 3: Särskilda krav för elektromekaniska mätsystem

SVENSK STANDARD SS-EN ISO :2005. Kvalitetskrav för smältsvetsning av metalliska material Del 2: Omfattande kvalitetskrav (ISO :2005)

Fönster och dörrar Mekanisk livslängd Krav och klassificering. Windows and pedestrian doors Mechanical durability Requirements and classification


SVENSK STANDARD SS-EN :2006

Inredning Köksinredning och apparater Måttsamordning. Kitchen furniture Co-ordinating sizes for kitchen furniture and kitchen appliances

Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 11: Drilling machines

SVENSK STANDARD SS-EN ISO :2006

SVENSK STANDARD SS-EN 10021:2007. Allmänna tekniska leveransbestämmelser för järn- och stålprodukter

SVENSK STANDARD SS-EN ISO :2006

SVENSK STANDARD SS-EN :2012/A3:2017

SVENSK STANDARD SS-EN ISO :2005. Mjukpapper och mjukpappersprodukter Del 5: Bestämning av våtstyrka (våtdragstyrka) (ISO :2005)

SVENSK STANDARD SS-EN 14286:2005. Aluminium och aluminiumlegeringar Svetsbara valsade produkter för tankar för transport och lagring av farligt gods

SVENSK STANDARD SS-EN :2004

SVENSK STANDARD SS-EN 54-7/A2:2006

SWEDISH STANDARDS INSTITUTE

Free-standing chimneys Part 6: Steel liners Design and execution

SVENSK STANDARD SS-EN ISO :2006. Plast Metoder för exponering i artificiellt ljus Del 2: Xenon-arc ljuskällor (ISO :2006)

Glasfasader Lufttäthet Prestandakrav och klassificering

Provning av sprutbetong Del 7: Fibermängd hos fiberarmerad betong

SVENSK STANDARD SS-EN ISO Tandvård Dentala material Legeringspulver (alloys) för amalgam (ISO 1559: Technical Corrigendum 1:1997)

SVENSK STANDARD SS-EN ISO :2005

Personlig fallskyddsutrustning Helselar. Personal protective equipment against falls from a height Full body harnesses

SVENSK STANDARD SS-EN 2732:2005. Aerospace series Magnesium alloy MG-C46001-T6 Chill casting. Fastställd Utgåva 1

Förpackningar Transportförpackningar för farligt gods Återvunnet plastmaterial (ISO 16103:2005)

Welding of thermoplastics Machines and equipment for hot gas welding (including extrusion welding)

Transcription:

SVENSK STANDARD SS-EN 12899-3:2007 Fastställd/Approved: 2007-11-13 Publicerad/Published: 2007-12-13 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 93.080.30 Vägutrustning Permanenta vägmärken Del 3: Kantstolpar och retroreflektorer Fixed, vertical road traffic signs Part 3: Delineator posts and retroreflectors SWEDISH STANDARDS INSTITUTE

Hitta rätt produkt och ett leveranssätt som passar dig Standarder Genom att följa gällande standard både effektiviserar och säkrar du ditt arbete. Många standarder ingår dessutom ofta i paket. Tjänster Abonnemang är tjänsten där vi uppdaterar dig med aktuella standarder när förändringar sker på dem du valt att abonnera på. På så sätt är du säker på att du alltid arbetar efter rätt utgåva. e-nav är vår online-tjänst som ger dig och dina kollegor tillgång till standarder ni valt att abonnera på dygnet runt. Med e-nav kan samma standard användas av flera personer samtidigt. Leveranssätt Du väljer hur du vill ha dina standarder levererade. Vi kan erbjuda dig dem på papper och som pdf. Andra produkter Vi har böcker som underlättar arbetet att följa en standard. Med våra böcker får du ökad förståelse för hur standarder ska följas och vilka fördelar den ger dig i ditt arbete. Vi tar fram många egna publikationer och fungerar även som återförsäljare. Det gör att du hos oss kan hitta över 500 unika titlar. Vi har även tekniska rapporter, specifikationer och workshop agreement. Matriser är en översikt på standarder och handböcker som bör läsas tillsammans. De finns på sis.se och ger dig en bra bild över hur olika produkter hör ihop. Standardiseringsprojekt Du kan påverka innehållet i framtida standarder genom att delta i någon av SIS ca 400 Tekniska Kommittéer. Find the right product and the type of delivery that suits you Standards By complying with current standards, you can make your work more efficient and ensure reliability. Also, several of the standards are often supplied in packages. Services Subscription is the service that keeps you up to date with current standards when changes occur in the ones you have chosen to subscribe to. This ensures that you are always working with the right edition. e-nav is our online service that gives you and your colleagues access to the standards you subscribe to 24 hours a day. With e-nav, the same standards can be used by several people at once. Type of delivery You choose how you want your standards delivered. We can supply them both on paper and as PDF files. Other products We have books that facilitate standards compliance. They make it easier to understand how compliance works and how this benefits you in your operation. We produce many publications of our own, and also act as retailers. This means that we have more than 500 unique titles for you to choose from. We also have technical reports, specifications and workshop agreements. Matrices, listed at sis.se, provide an overview of which publications belong together. Standardisation project You can influence the content of future standards by taking part in one or other of SIS s 400 or so Technical Committees.

engelska versionen av EN 12899-3:2007. Copyright/Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by!the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon 08-555 520 00. Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), tel +46 8 555 520 00. Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. SIS Förlag AB, SE 118 80 Stockholm, Sweden. Tel: +46 8 555 523 10. Fax: +46 8 555 523 11. E-mail: sis.sales@sis.se Internet: www.sis.se

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12899-3 November 2007 ICS 93.080.30 English Version Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors Signaux fixes de signalisation routière verticale - Partie 3: Délinéateurs et rétroréflecteurs Ortsfeste, vertikale Straßenverkehrszeichen - Teil 3: Leitpfosten und Retroreflektoren This European Standard was approved by CEN on 4 February 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12899-3:2007: E

SS-EN 12899-3:2007 (E) Provläsningsexemplar / Preview Contents Page Foreword... 3 Introduction... 4 1 Scope... 5 2 Normative references... 5 3 Terms, definitions, symbols and abbreviations... 6 4 Dimensions and tolerances... 7 5 Types of delineator post and retroreflector... 7 5.1 Types of delineator post... 7 5.2 Types of retroreflector... 7 6 Performance requirements... 7 6.1 General... 7 6.2 Fixing of retroreflectors on delineator posts... 8 6.3 Visual performance... 8 6.4 Physical performance... 10 7 Test methods... 12 7.1 Test conditions... 12 7.2 Test products... 12 7.3 Visual performance tests... 12 7.4 Physical performance tests... 13 8 Marking, labelling and product information... 15 8.1 Complete traffic delineators, delineator posts only or fixed retroreflectors only... 15 8.2 Components... 16 9 Evaluation of conformity... 16 10 Dangerous substances... 16 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive...17 ZA.1 Scope and relevant characteristics... 17 ZA.2 Procedure for attestation of conformity of delineator posts and fixed retroreflectors... 21 ZA.3 CE marking and labelling... 23 2

SS-EN 12899-3:2007 (E) Foreword This document (EN 12899-3:2007) has been prepared by Technical Committee CEN/TC 226 ''Road equipment'' the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by August 2012. No existing European Standard is superseded. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directives. For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. This European Standard consists of the following Parts under the general title: Fixed, vertical road traffic signs Part 1: Fixed signs Part 2: Transilluminated traffic bollards (TTB) Part 3: (this part) Delineator posts and retroreflectors Part 4: Factory production control Part 5: Initial type testing It is based on performance requirements and test methods published in CEN, CENELEC, CIE (International Commission on Illumination) and ISO documents together with standards of the CEN member organizations. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 3

SS-EN 12899-3:2007 (E) Provläsningsexemplar / Preview Introduction This European Standard is designed for use by road authorities. It can also be used by private developers who wish to use signs on their own land similar to those used on public highways. It can be used to implement type approval and certification testing. It derives from performance requirements and test methods published in CEN, CENELEC, CIE and ISO documents together with standards of the CEN member organizations. 4

SS-EN 12899-3:2007 (E) 1 Scope This Part 3 of EN 12899 specifies requirements for new delineator posts and for new retroreflectors as separate products or combined together to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retroreflective properties are specified taking into account CIE recommendations. Structural requirements include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. To define durability this standard also includes performance levels to be maintained after natural weathering exposure. No requirements are given for the use of colours, dimensions and tolerances of delineator posts and retroreflectors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12767, Passive safety of support structures for road equipment Requirements and test methods EN 12899-1:2007, Fixed, vertical road traffic signs Part 1: Fixed signs EN 12899-4:2007, Fixed, vertical road traffic signs Part 4: Factory production control EN 12899-5:2007, Fixed, vertical road traffic signs Part 5: Initial type testing EN ISO 877:1996, Plastics Methods of exposure to direct weathering, to weathering using glassfiltered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) EN ISO 9001, Quality management systems Requirements (ISO 9001:2000) ISO 4:1997, Information and documentation Rules for the abbreviation of title words and titles of publications ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests ISO/CIE 10526, CIE standard illuminants for colorimetry ISO/CIE 10527, CIE standard colorimetric observers CIE 15, Colorimetry CIE 54.2, Retroreflection Definition and measurement 5

SS-EN 12899-3:2007 (E) Provläsningsexemplar / Preview 3 Terms, definitions, symbols and abbreviations For the purposes of this document, the symbols and abbreviations given in ISO 4:1997 and the following apply. 3.1 delineator post post, placed at the edge of a carriageway, to indicate the alignment of the road and/or to warn of a hazard during daytime conditions. NOTE The delineator post can be equipped with one or more retroreflectors 3.2 ground line notional horizontal line on the delineator post which, when it is installed correctly, is level with the ground (see Figure 1) or with the top of the safety barrier (see Figure 2) on which it is installed NOTE Delineator posts are normally installed in the level part of the verge so as to fulfil their function of indicating the alignment of that part of the highway on which it is safe to drive and/or to indicate the presence of a hazard. Key: 1 Carriageway 5 Verge 2 Height 6 Slope 3 Delineator post 7 Retroreflector 4 Ground line Figure 1 Illustration of ground line (1) Key: 1 Carriageway 5 Verge 2 Safety barrier 6 Slope 3 Delineator post 7 Retroreflector 4 Ground line Figure 2 Illustration of ground line (2) 6

SS-EN 12899-3:2007 (E) 3.3 retroreflector device, made using any available technology, that retroreflects incident light. NOTE Retroreflectors may be installed on delineator posts 3.4 test product product (delineator post or retroreflector) in original size and design, or part of it prepared by the manufacturer or the supplier, to be subjected to testing in accordance with the applicable part of this standard 4 Dimensions and tolerances Dimensions and tolerances of delineators and retroreflectors shall conform to the customer s requirements. 5 Types of delineator post and retroreflector 5.1 Types of delineator post The classification of types of delineator post shall be: D1 delineator posts for ground fixing which are not specifically designed to be reusable after the impact test described in 7.4.1.3; D2 delineator posts for ground fixing which are designed to be reusable after the impact test described in 7.4.1.3 (e.g. those posts which may be dislodged, but are designed to be remounted); D3 delineator posts for ground fixing which are designed to deflect and after the impact test as described in 7.4.1.3 return to an upright position (spring-back or flexible); D4 delineator posts for fixing to structures (fixed), e.g. bridges, crash barriers and guard rails. 5.2 Types of retroreflector The classification of types of retroreflector shall be: R1 retroreflective sheeting (material); R2 plastic corner cube retroreflectors; R3 biconvex glass retroreflectors. 6 Performance requirements 6.1 General All parts of delineator posts of types D1, D2 and D3 shall present no sharp edges above the ground line. If the materials are suitable for recycling this shall be indicated by the appropriate material code. 7