2015 GLUE PUMPS for Labelling Machines NEW MODEL 2015 ADVANTAGES: hoseproof IP66 programmable NFC-enabled Timmer GmbH Dieselstraße 37 D-48485 Neuenkirchen Tel.: +49 5973 9493-0 Fax: +49 5973 9493-90 www.timmer.de
HEADQUARTERS OVER 35 Y E A R S Timmer GmbH Timmer GmbH is your reliable partner in pneumatics, vacuum technology, pumps and dosing technology. Employing a staff of over 120, we develop, produce and sell an extensive product range in two factories from customised solutions to technical accessories. In short: We offer everything you need on a day-to-day basis. Our products are known all over the world under the brand names Timmer and TIVAtec. Administration Purchasing & Sales Inventory & Logistics Manufacturing of Pumps Manufacturing of Cylinders Manufacturing of Costumized Solutions BRANCH Research & Development Engineering & Design Prototyping Manufacturing of Cylinders Manufacturing of Vacuum Lifting Devices Construction of Jigs and Fixtures
Innovation Glue Pump News Timmer GmbH has been manufacturing glue pumps for labelling machines for over 20 years. With more than 20.000 pumps sold, Timmer is your contact for any application in the beverage industry - no matter where you are, we are your first choice in reliable and stable glue conveying. State-of-the-art research in pump technology and technical innovations in the electronic industry in collaboration with our customers led to the development of this new progressive glue pump. High reliability Easy adjustment of stroke frequency Low maintenance Interface for the preselection of the temperature (optional) NFC-enabled Protection class IP66: hoseproof Energy-efficient Programmable Control Interface Features: Temperature display Temperature range up to 50 C IP66 Display in Celsius or Fahrenheit Stroke counting readable via NFC Display of stroke frequency on adjusting the throttle Operational data readable via Android App Maintenance interval display ANDROID APP ON Google Play is a trademark of Google Inc. Technical and optical modifications reserved. Errors and omissions excepted.
Pump series PTI-D3 Technical Data / Sectional View General data 140 mm 125 mm Actuator pneumatic, self-priming Suction height 2 m of water column (20 C) Transmission ratio 3,8:1 Max. flow rate (water) 33 cm³ per double stroke (4 l/min / 240 l/h at 2 Hz) Temperature (fluid) max. 50 C can be adjusted electronically Viscosity (fluid) max. 100.000 mpa s Low pulsation conveying of medium in suction and pressure modes Suction side - connection suction pipe (standard length 420 mm) Pressure side - connection hose nozzle 19 mm, 3/4 female thread Weight 6,9 kg Max. stroke frequency 2 Hz Glue outlet 738 mm Materials Housing cover Plastic ABS Housing base Plastic POM Housing of suction foot Fluid valve balls Riser pipe Piston rod Heater Tie rods (2 pieces) Nozzle (19 mm) Handle O-rings of suction- and pressure valves FKM Heater Suction valve 125 mm 304 mm Elektrische Daten (Glue pump with heater) Electrical connection 200-240 V, 50/60 Hz Power input approx. 950 W by maximum heater output Power supply lead (shock-proof plug) 2 m rubber cable Temperature control unit electronic Temperature range up to +50 C Temperature setting via display and keypad / Timmer App Protection class IP66 protection against dust, water-jets SPS interface optional Pneumatic data 43 mm 83 mm Compressed air connection Operating air pressure Compressed air consumption Pneumatic actuator (pump with heater) Pneum. actuator (pump without heater) plug connection 7,2 NW 3-6 bar filtered compressed air max. 170 l/min at continous operation 5/2 way valve, electric oscillating valve Glue inlet 4 Technical and optical modifications reserved. Errors and omissions excepted.
Pneumatic Glue Pump for viscous and liquid fluids Pump series PTI-D3 Pneumatic Glue Pump With Heater Order no. Type Version Scope of delivery 54005000 PTI-D3-H-400 with integrated heater Heater (stainless steel) Nozzle (19 mm, stainless steel) Air connection with ball valve 1/4 and plug nipple DN 7,2 Power supply lead w. shock-proof plug, 2m Operating manual The Timmer glue pump with integrated heater and electronic control is a pneumatic driven piston pump which conveys glue in both stroke movements at a max. frequency of 2 Hz. The stroke frequency can be shown on the display. The glue facilitation runs with suction and pressure valves, as soon as the pump starts pneumatically. The pump frequency is generated with an exhaust air valve, which can be adjusted manually. 54005000 Pneumatic Glue Pump Without Heater Order no. Type Version Scope of delivery 54005200 PTI-D3-O-400 without heater Nozzle (19 mm, stainless steel) Air connection with ball valve 1/4 Operating manual The pump without heater does not require a power supply but is controlled pneumatically. The pump frequency is generated with an exhaust air valve, which can be adjusted manually. 54005200 Technical and optical modifications reserved. Errors and omissions excepted. 5
Pump series PTI-D3 Pneumatic Container Glue Pump Pneumatic Container Glue Pump With Heater Order no. Type Version Scope of delivery 54005400 PTI-D3-H-Cont-400 with integrated heater Pump with integrated heater and electronic stroke counter Container lid, plastic Clamp ring for mounting Feed hose with filling valve Fastening for feed hose Air connection with ball valve 1/4 Power supply lead with shock-proof plug, 2m Operating manual The Timmer container glue pump is equivalent to the glue pump with heater (54005000) but with an extended suction pipe (1000mm) for conveying glue from IBC containers. The number of strokes which have to be adjusted by the integrated stroke counter dictates the volume of the medium. The glue facilitation runs with suction and pressure valves, as soon as the pump starts pneumatically. The pump frequency is generated with an exhaust air valve, which can be adjusted manually. Upon reaching the programmed amount of strokes, the pump shuts down automatically. 54005400 Pump Connections Glue outlet Additional compressed air connection Power supply lead Compressed air connection with plug nipple Glue inlet 6 Technical and optical modifications reserved. Errors and omissions excepted.
Accessories (optional) Pump series PTI-D3 Container cover for glue pump as set Order no. Type 59010020 PTI-D3-ZUB-Leimdeckel-Set Consists of: stainless steel container covering, POM funnel with bayonet fastener, stainless steel double sieve 59010020 Container cover glue cover for glue pump stainless steel stainless steel 59010018 PTI-D3-ZUB-Leimdeckel-VA Consists of: stainless steel container covering 59010018 Glue funnel with double sieve for glue pump POM 59010019 PTI-D3-Leimtrichter-Set POM funnel, stainless steel double sieve 59010019 Mounting clamp ring for height adjustment of glue pump series D3 POM 55002010 PTI-D3-ZUB-Montageklemmring Consists of: POM clamp ring with bayonet fastener, stainless steel screws 55002010 Euro plug (CEE plug, shaped plug) 52020071 PTI-D2-ZUB-CEE-Formstecker CEE plug 3x16 A 220 V with bend protection for the cable, pre-assembled 52020071 Procon plug 52020070 PTI-D2-ZUB-Proconstecker Procon plug, pre-assembled Compressed air connection with hose 52020070 Pressure regulator ¼, PVC hose 12/6, ball valve mini ¼ with nozzle 6 ¼, pre-assembled Order no. Type Hose length Hose inner ø Hose outer ø 54000191 PTI-D3-ZUB-Druckluftanschluss-2m 2 m 6 mm 12 mm 54000192 PTI-D3-ZUB-Druckluftanschluss-5m 5 m 6 mm 12 mm 54000191 54000192 Feed hose PVC Feed hose PVC, incl. hose clamp Order no. Type Hose length Hose inner ø Hose outer ø 52020073 PTI-D2-ZUB-Förderschlauch-2M 2 m 19 mm 27 mm 52020068 PTI-D2-ZUB-Förderschlauch-5M 5 m 19 mm 27 mm Technical and optical modifications reserved. Errors and omissions excepted. 52020073 52020068 7
TIM M E R I S R E P R ESENT ED INT ERNAT IONAL LY: Germany Spain Finland France Poland Slovakia Hungary Italy Luxembourg Romania Russia Ukraine China India Canada USA Indonesia Timmer GmbH HEADQUARTERS Dieselstraße 37 48485 Neuenkrichen Germany CC 3.0 License by www.mygeo.info Projekt BRANCH Auf der Lauge 4 48485 Neuenkrichen Germany References Tel.: +49 (0) 59 73-94 93-0 Fax: +49 (0) 59 73-94 93-90 E-Mail: info@timmer.de www.timmer.de Certification Field of application: Our glue pumps can be used everywhere, where labels are fixed on bottles, cans, drinks, etc.: Food and beverage industry: Breweries Wine Fruit juice etc.... Other fields of application: Manufacturers of glue for labelling Manufacturers of labelling machines Furniture industry and many others DIN ISO 9001:2008 certified 99999940EN/10/2015 Timmer GmbH Czech Republic The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. http://developer.android.com/distribute/tools/promote/brand.html Google Play is a trademark of Google Inc. Turkey