Femto on Jetfire femto newsletter 2013/4 Top Partner award 3 Femto Engineering receives Siemens Top Partner award for the Benelux. Femto on JetFire 4 Thermal and structural response on an exceptionally high Jetfire load. Bullet impact 6 Femto R&D bullet impact on metal plate. Happy holidays 8 Femto wishes you happy holidays and an innovative 2014!
The past year featured significant milestones for Femto. There were large projects executed, the demand on CAE software grew significantly and we received the Siemens Top Partner Award Femto Engineering is specialized in mechanics and analyzes products and constructions using Finite Element Technology. In addition to linear FEA, we also offer solutions for dynamic, transient, thermal, flow (CFD) and fatigue issues. Femto advises companies in the selection of CAE software and develops customized programs for easy and quick simulation performance. As the official Siemens PLM reseller in the Benelux, we can provide you with state of the art CAE software such as Femap, NX CAE and NX Nastran. 2
News and events New office for Femto Engineering GmbH www.femto-engineering.de In October Femto Engineering GmbH moved to a new office as the old office became too small. The additional space allows Femto to expand further with new engineers and interns. The new office is also located in the Technologiehof Münster, thus the visiting adres remains: Femto Engineering GmbH, Mendelstraße 11, 48149 Münster, Germany. Succes Plastic Fair and Offshore Energy September and October 2013 Femto has been present at both the Plastics fair and the Offshore Energy expo. Many different Industries need specialized people, software and skills to make sure they develop their products and projects based on quality information. Femto has been welcoming old and new relations during these expo s and had a great opportunity to show and explain all the specialized services Femto supports. Thank you for visiting us! Femto receives Siemens Top Partner Award 5th November 2013 At the Siemens PLM Software European Partner Leadership Summit (EPLS) on the 5th of November, Femto Engineering was rewarded with the Top Partner Award for the Benelux. Because of the 150% year to year growth of their CAE software business for Siemens PLM Software, their excellent performance on the Voice of the Customer survey and the high loyalty of their customer base for many years, Femto received the Top Partner award. Tom Santegoeds and Bastiaan Modderman accepted the award from Tony Jolly, Vice President channels, EMEA. This is a major achievement for the team at Femto Engineering, said Tom Santegoeds, Managing Director of Femto Engineering. 3
Van Dam Femto on Jetfire A Finite Element Analysis was performed by Femto Engineering on a Van Dam Gadam fire door for the Offshore Industry. The results were correlated to a full scale fire test according to the IMO Fire Test Procedure. After this the model was then used to predict thermal and structural response on an exceptionally high 60 minute Jetfire load. The project was to analyse both the thermal and structural behaviour of the fire doors, with the main purpose to obtain a realistic model in FEMAP which could be used to simulate other fire tests, on similar types of door in different sizes. In order to develop a Finite Element Method (FEM) model correlating to the full scale tested fire door, certain analysis parameters had to be tuned to be able to simulate the tests. The material properties of the insulation layers, sealing and steel parts are highly dependent on temperature and show complex thermal behaviour. To perform the thermal analysis a furnace temperature was applied on the fire side of the door. 4 This analysis has become a key factor in the Approval of special fire doors. Pieter Verburg Van Dam BV On the non-fire side a convection load was applied to give an optimal simulation of the heat transfer to the adjacent room. After the thermal analysis a structural analysis was performed. For this analysis
the thermal load was used generated from the output of the previous thermal analysis. The door was placed in a bulkhead and for the structural analyses the edges of the bulkhead where fixed in all translational and rotational degrees of freedom. The temperatures resulting from the Finite Element Analysis where correlated and therefore identical to the temperatures measured at the thermocouples used in the fire test. Since all results where representative for the real fire door, the material properties had to be tuned correctly and the model is considered to be valid for the prediction of other tests for the same type of door. For the next test the worst-case jet fire load situation was simulated by using an almost instant temperature rise up to 1200 degree Celsius on the fire side of the door. In 60 minutes the door still gave good insulation against the exceptionally high temperature load. Realistic temperature contour plots were made. By using structural analysis we were able to assess displacements with given thermal expansion to prevent firepassage. Want to know more? For more information, please contact Daan van Campen (dvc@femto.eu). 5
Femto R&D Bullet impact & New Employee In previous newsletters you might have already seen some things about the SPH method. SPH stands for Smoothed Particle Hydrodynamics; it is a continuum based discrete element method that uses particles to simulate the behavior of materials. Due to its dynamic structure SPH is often used to simulate fluids. However it can also be used to simulate solids. To illustrate this we have created a benchmark SPH simulation about a bullet impacting a steel plate. The plate has a thickness of 14.3 mm. The bullet, a 338 Winchester Magnum A-frame hunting bullet, impacts the plate with an initial velocity of 842 m/s. The results of the simulation were compared to experimental results. The overall difference was less than five percent. For the bullet impact movie check www. youtube.com/user/femtofem Marcel de Bruin Project Engineer After travelling the world for two years Marcel settled down at Femto where he now works as a project Engineer. Before his travels he also worked as an Engineer at Brabant Engineering where he worked on several projects in a wide range of Industries. He studied Mechanical Engineering in Enschede and he did his graduation on developing a selection method for excavators.you can contact Marcel at mdb@femto.eu Try Femap for free! Learn more about Femap with the free trial version. You can check our website or the QR code. 6
Announcements and courses Introduction Femap with NX Nastran 4 days January 7th, 14th, 21st, 28th February 4th, 11th, 18th, 25th Training for those who start with FEM in Femap with NX Nastran. NX CAE @ Femto November 7th Femto Engineering can now also offer NX CAE software, a leading integrated solution for computer-aided design, on top of Femap and NX Nastran software, to its current and future customers. As partner of Siemens PLM Software for Femap and NX Nastran, Femto Engineering now adds the NX CAE software to its services and thereby putting even more engineering know-how to good use in supporting its customers with the development of their innovative products and projects. For more information about Femto and NX CAE check our website or the QR code. Basic non-linear 1 day January 23rd Training for non-linear analysis in the basic solver of Femap with NX Nastran. Femap test drive 1 day February 6th Guided try-out for Femap with NX Nastran. NX CAE Event 1 day December 10th Event at the LMS headquarters in Leuven. With new features in NX 9 and the new NX Nastran 9 solver. For details check our website, www.femto.eu 7
Happy Holidays! Femto can help you solve your present stress And wishes you an innovative 2014 we enable innovation