OOL ING ONL Y HE AT P UM P PCV0612C. C ooling Only 50 Hz/60 Hz. Heat P ump 50 Hz/60 Hz

Similar documents
E 1E. small offices and shops. The ideal air conditioning system for. 5S+1E concepts of

COOLING ONLY HEAT PUMP PCV0612F. Cooling Only 50 Hz/60 Hz. Heat Pump 50 Hz/60 Hz

PCV0915. Cooling Only 50 Hz Heat Pump 50 Hz/60 Hz. A system with the high capacity needed to suit large-sized buildings

COOLING ONLY HEAT PUMP

PCV0915. Cooling Only 50 Hz Heat Pump 50 Hz/60 Hz. A system with the high capacity needed to suit large-sized buildings

PCV1217. Cooling Only 50 Hz Heat Pump 50 Hz/60 Hz. A system with the high capacity needed to suit large-sized buildings

PCVAU0828B WATER COOLED INVERTER SERIES. HEAT PUMP 50 Hz HEAT RECOVERY 50 Hz

PCV1009A Daikin products are manufactured for export to numerous countries throughout the world. Prior to

Single outdoor unit series suitable for homes, offices, shops, and middle-sized buildings

Ceiling Mounted Cassette ( Round Flow with Sensing ) Type

PCV0320. Quieter, Smaller, Sleeker, Simpler: The is now four times better. Even earth friendly with a higher COP.

PCXSPH1732A. Warning. Head office: Umeda Center Bldg., , Nakazaki-Nishi, Kita-ku, Osaka, Japan.

PLXRMM1606B. Wall Mounted. FTN-A Series. COOLING ONLY [50Hz] V

Split Type Air Conditioners FTNE-M Series Cooling Only [50 Hz]

FOR REPLACEMENT USE PCV1213. Cooling Only 50 Hz

Inverter Wall Mounted

VRVIV-0117-E. Cooling Only 50 Hz

Inverter Wall Mounted

W SERIES. PCVMT1603aprv WATER COOLED SYSTEM. Cooling Only 50 Hz

PCR0709A. Options. Indoor unit

Inverter Wall Mounted

VRV systems. Superior heating under low temperature conditions

DAIKIN Modular Inverter Air Cooled Chiller

A wider lineup of DC Inverter and Non-Inverter air conditioners with 19 models is currently available. You can choose whichever that fits your

SiENBE Service Manual. RXYSQ4-5-6PA7Y1B, PA7V1B R-410A HEAT Pump 50Hz

CHI NHAÙNH HAØ NOÄI Taàng 12, toøa nhaø Ocean Park Tower, 1 Ñaøo Duy Anh, Quaän Ñoáng Ña, Haø Noäi

ENERGY-INTELLIGENT TECHNOLOGY HEATING AND COOLING SYSTEMS 5.16 LIGHT COMMERCIAL RESIDENTIAL AIR COOLED RENOVATION NEW CONSTRUCTION

PVVVN1325aprv. PCVAU1327 Preview. Cooling Only / Heat Pump 50 Hz

The Comfort and Luxury You Deserve

VRV IV S-series heat pump

LV Series. SEER 15+ Concealed Built in Heat Pump

Energy-saving operation

The Multi-talented VRV-S.

P-SERIES PRODUCT CATALOGUE AIR CONDITIONER & HEAT PUMP

The Comfort and Luxury You Deserve

PLXSID1605. Warning HEAD OFFICE :

Si REMOVAL PROCEDURE. 4.0/5.0/5.2/5.8/6.8/7.5 kw Class. Outdoor Unit Inverter Multi Type

Si REMOVAL PROCEDURE. 2.5/3.2/3.5 kw Class. Outdoor Unit Inverter Pair Type

. Creating Maximum Comfort

MULTI SYSTEM SHOPS RESTAURANTS SMALL OFFICES COMMERCIAL MULTI SYSTEM.

PCRAU0726F. Multi-Split Type Air Conditioners L Series with DC Inverter Power Control Cooling Only & Heat Pump [50 Hz]

EDUS D Engineering Data. Design Manual RWEQ-TATJU, 208 / 230 V RWEQ-TAYDU, 460 V RWEQ-TAYCU, 575 V. Heat Pump 60 Hz Heat Recovery 60 Hz

VRV+AHU System DAIKIN NEW STANDARD SERIES UNIT MODEL AHUR-CA/SA

PCH0601 HE A T R E CLA IM V E N T ILA T ION

SKYAIR SERIES SINGLE ZONE HEATING & COOLING SYSTEMS. Up to 20 SEER / Up to 12.0 HSPF / 14.5 EER INVERTER, VARIABLE-SPEED COMPRESSOR

FBQ. DC Duct Heat Pump or Cooling Only

OUTDOOR UNITS Air-Cooled VRV REYQ8-48P8Y1B 140 RXYQ5-54P7W1B(A) 142 RXYQ16-36P7W1B 144 RXYSQ4-6PA7Y1B 145 RXYSQ4-6PA7V1B 146 RXQ5-18P7W1B(A) 147

OUTDOOR UNITS Air-Cooled VRV REYQ8-48P8Y1B 128 RXYQ5-54P7W1B(A) 130 RXYQ16-36P7W1B 132 RXYSQ4-6PA7Y1B 133 RXYSQ4-6PA7V1B 134 RXQ5-18P7W1B(A) 135

Concealed ceiling units

LV Series. SEER 20+ Wall Mount Heat Pump

Product. ortfolio. Integrated climate control

SiBE39-402A. Service Manual. R-410A Heat Pump 50Hz

VRV LIFE FLEXIBLE / DUAL-FUEL HEATING / INVERTER TECHNOLOGY / QUIET / SPACE-SAVING

Inventor of the Inverter Digital Inverter System

Quick & High Quality replacement

Technical Guide. Multizone: Multi-Split Type Heat Pump Systems

Heat Pump Air Conditioning Systems

NEW DAIKIN FTQ SERIES HEATING AND COOLING SYSTEMS. MULTI-POSITIONAL AIR HANDLER Up to 16 SEER / Up to 10.4 HSPF / Up to 12.5 EER

HEATING AND COOLING SOLUTIONS DUCTED SYSTEMS PCDUAU1117

P-SERIES PRODUCT CATALOGUE AIR CONDITIONER & HEAT PUMP

FAQ. Wall Mount Heat Pump or Cooling Only

HEATING AND COOLING SOLUTIONS DUCTED HEAT PUMPS PCDUNZ0717

EPCE03-06D. The Next Generation of Air Conditioning Systems

The Comfort and Luxury You Deserve

KE Series. SEER 14+ Wall Mount Heat Pump or Cooling Only

PRODUCT LINEUP VRF. For LIGHT COMMERCIAL & RESIDENTIAL, COMMERCIAL

DAIKIN FBQ DUCTED SERIES HEATING & COOLING SYSTEMS. DC DUCT-CONCEALED Up to 17.5 SEER / Up to 10.6 HSPF Up to 13.0 EER

Product. ortfolio. Integrated climate control

Split Type Air Conditioners

Up to SEER 26.1 Wall Mount Heat Pump

VRV HEAT RECOVERY

DAIKIN FHQ SERIES HEAT PUMP & COOLING ONLY SYSTEMS. CEILING-SUSPENDED CASSETTE Up to 18.0 SEER / Up to 10.0 HSPF Up to 14.0 EER

Air Conditioning. Technical Data. Concealed ceiling unit with high ESP EEDEN FDQ-C

High Efficiency, Powerful Heating and Cooling HEAT PUMP PEH-7, 8, 10 AIR COOLED SPLIT-TYPE DUCTED AIR CONDITIONERS. Series

2 &3-4 Head Multi System

Commercial Air Conditioners. VRF 60Hz V4+S/V4+R/V4+W/Mini VRF

Air conditioners, heating & cooling for shops,restaurants and offices

SiUS RXYQ72, 96, 144, 168, 192MTJU R-410A Heat Pump 60Hz RXYQ72MTJU RXYQ96MTJU RXYQ144MTJU RXYQ168MTJU RXYQ192MTJU

Midea Ducted and Cassette Split Systems. Maximum versatility, maximum value.

Air Conditioning. Technical Data. Concealed ceiling unit with high ESP EEDEN FXMQ-MB

Daikin air conditioners for your home

DAIKIN FHQ SERIES HEAT PUMP & COOLING ONLY SYSTEMS. CEILING-SUSPENDED CASSETTE Up to 18.0 SEER / Up to 10.0 HSPF Up to 14.0 EER

FTQ SERIES DUCTED HEAT PUMP SYSTEMS. INDOOR AND OUTDOOR UNITS Up to 20 SEER / Up to 12 HSPF / Up to 14.5 EER INVERTER, VARIABLE SPEED COMPRESSOR

Daikin Airconditioning UK Ltd

Si Heat Reclaim Ventilation - with DX coil - [Applied Models] VKM 50GAV1 VKM 80GAV1 VKM 100GAV1 VKM 50GAMV1 VKM 80GAMV1 VKM 100GAMV1

3 rd Generation of VRV. The professional solution for your professional project

RC-0219-A. Single-Split Non Inverter Series

Service Manual. Inverter Pair Floor Standing Type K-Series. Draft. SiBE [Applied Models] Inverter Pair : Heat Pump

DAIKIN FAQ SERIES HEATING & COOLING SYSTEMS. INDOOR WALL-MOUNTED UNITS Up to 18.6 SEER / Up to 9.4 HSPF Up to 12.7 EER

WALL MOUNTED AIR CONDITIONER RANGE THE PERFECT CLIMATE.

For Residential & Light Commercial Applications. 4 Ton 8 Zone Multi Split Heat Pump System

Product Brochure Smart Power. Low Profile Ducted

VRF D4 PLUS System. Highlights. Digital Scroll Series. Dealer information. Commercial Air Conditioner Business Units Midea Group

Quick & High Quality replacement

SiBE041010EA. Service Manual. Inverter Pair Wall Mounted Type J-Series. [Applied Models] Inverter Pair : Heat Pump

SiBE04-808_C. Service Manual. Inverter Pair Wall Mounted Type G-Series. [Applied Models] Inverter Pair : Cooling Only Inverter Pair : Heat Pump

Ultimate VRF System R410A, 50Hz

Technology that works fast. Inverter Ducted Systems

Technology that works fast. Inverter Ducted Systems

SiE Service Manual. RXYQ5-48MAY1 R410A Heat Pump 50Hz

Transcription:

Warning Daikin Industries, Ltd. s products are manufactured for export to numerous countries throughout the world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a particular country. Prior to purchase, please therefore confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation. Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion. Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion. Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings. If you have any enquiries, please contact your local importer, distributor and/or retailer. PCV06C Cautions on product corrosion. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor. JMI-007 JQA-45 About ISO 900 ISO 900 is a plant certification system defined by the International Organization for Standardization (ISO) relating to quality assurance. ISO 900 certification covers quality assurance aspects related to the design, development, manufacture, installation, and supplementary service of products manufactured at the plant. About ISO 400 ISO 400 is the standard defined by the International Organization for Standardization (ISO) relating to environmental management systems. Our group has been acknowledged by an internationally accredited compliance organisation as having an appropriate prograe of environmental protection procedures and activities to meet the requirements of ISO 400. A s pec ial air c onditioning s ys tem des igned for s mall offic es and s hops Dealer Specifications, designs and other content appearing in this brochure are current as of February 008 but subject to change without notice. Head Office: Umeda Center Bldg., -4-, Nakazaki-Nishi, Kita-ku, Osaka, 530-833 Japan Tokyo Office: JR Shinagawa East Bldg., -8-, Konan, Minato-ku, Tokyo, 08-0075 Japan http://www.daikin.com/global_ac/ c All rights reserved Printed in Japan 0/08/004 Y.K. OOL ING ONL Y C ooling Only Hz/60 Hz HE AT P UM P Heat P ump Hz/60 Hz

The ideal air conditioning system for small offices and shops E xtending the c ore 5S c onc epts pac e s aving, S uffic ient c apac ity, S lim des ign, S ound- reduc ed operation and S ingle phas e power s upplydaikin s VR V III- S offers added value with the E c onc epte as y ins tallation and E as y maintenanc e. W ith all thes e features and more, we proudly pres ent the ideal air c onditioning s ys tem des igned for s mall- s ized buildings. Slim, compact and sufficient capacity S 5S concept 5S +E c onc epts of Approx. 30 Footprint 635 VRV III (5 HP) Approx. 40% reduction 900 (4, 5, 6 HP) VRV III (5 HP) (4, 5, 6 HP) S pac e s aving S uffic ient c apac ity S lim des ign S ound-reduc ed operation S ingle phas e power s upply E as y maintenanc e E as y ins tallation E Outdoor unit can be installed on a balcony The compact, trunk-shaped outdoor unit can easily be installed on a balcony, realising complete system installation within each floor. This enables more useful utilisation of the space on the building rooftop. E concept Contents Introduction... page Indoor unit lineup... page 5 Option list... page 33 Indoor units... Outdoor units... page 6C ontrol s ys tems... page 3 Main features... page 3 Specifications... page 6 % reduction The VRV III-S is highly space saving, featuring slim and compact outdoor units. It is suitable for small offices and shops with capacities of 4, 5 and 6 HP. 765 The Volume Control systems... page 9 Indoor units... Outdoor units... page 33 page 35 page 35

MAIN FEATURES Wide range of choices Indoor units T o s uit the variety of rooms found in s mall offic es and s hops, the VR V III- S s ys tem offers wide range of indoor and outdoor units. VR V III- S indoor and outdoor units are almos t as eas y to ins tall as res idential air c onditioning s ys tems, making them ideal for s mall offic es and s hops. 4 types 77 models* A wide range of indoor units includes 77 models in 4 types. The indoor units can be selected to match every room and preference. Outdoor units 3 models Outdoor unit can be selected from three models to provide the power that suits your needs. The trunk-shaped outdoor unit can be neatly installed outside the office. Indoor unit lineup 4 types 77 models* Capacity Range 0.8 HP RX(Y)MQ4PVE 4 HP (. ) RX(Y)MQ5PVE 5 HP (4.0 ) RX(Y)MQ6PVE 6 HP (5.5 ) Cassette (Round Flow) Cassette (Double Flow) Cassette Corner Capacity Index 0 HP. HP.6 HP 3. HP.5 HP 3. HP 4 HP 5 HP 6.5 80 00 40 New FXFQ-P FXCQ-M FXKQ-MA Slim Ceiling Mounted Duct FXDQ-PVE (with drain pump) FXDQ-PVET (without drain pump) (700 width type) FXDQ-NAVE (with drain pump) FXDQ-NVET (without drain pump) Built-in FXSQ-M Duct New FXMQ-P Ceiling Suspended Wall Mounted (900/,00 width type) FXHQ-MA FXAQ-MA Floor Standing FXLQ-MA Concealed Floor Standing FXNQ-MA Note: R-40A VRV system indoor units are not compatible with the R- VRV system. * 3 types and 74 models for 60 Hz specifications. Connection unit series indoor units ( Hz only) Capacity Range Capacity Index Connection Unit Ceiling Suspended Cassette 0.8 HP 0 HP. HP 3..6 HP 40 HP 3 HP 7 BEVQ7MAVE 4 HP 00 5 HP BEVQ00MAVE BEVQMAVE FXUQ-MAV Note: BEV units are necessary for Connection unit series indoor units. Refer to the Engineering Data for details. 3 4

MAIN FEATURES 5 Energy efficiency and quiet operation Improved Outdoor units have been newly designed using the new compressor to realise energy saving performance and quiet operation. High COP during both cooling and heating operations One of the top features of the VRV III-S is its energy efficiency. It achieves high COP during cooling and heating operations by employing the new compressor. Improved Quiet operation provides luxurious comfort Quietness is yet another important feature of Daikin s VRV III-S system. To reduce noise and realise comfortable operation, latest technologies and features are applied to the outdoor units. For 4 and 5 HP cooling operations only. Nighttime quiet operation function Operation sound level selectable from 3 steps for the night mode Mode. Automatic mode Set on the outdoor PCB. Time of maximum temperature is memorised. The low operating mode will become active 8 hours* after the peak temperature in the daytime, and operation will return to normal 0 hours* after that. The operation sound level for the night mode can be selected from 47 db (Step ), 44 db (Step ) and 4 db (Step 3). Mode. Manual mode Starting time and ending time can be input. (An external control adaptor for outdoor unit, DTA04A6 or DTA04A6, and a subsequently obtained timer are necessary.) Mode 3. Combined mode Combinations of modes and can be used depending on your needs. *. Initial setting. Can be selected from 6, 8 and 0 hours. *. Initial setting. Can be selected from 8, 9 and 0 hours. Cooling VRVII-S Previous model RXYM-MVM 3.65 3.8.9 3.68 3.4 3.9 Above values are based on the following nominal conditions: Note: Cassette (Round Flow) type units are connected (4 HP: FXFQP x ; 5 HP: FXFQ63P x ; and 6 HP: FXFQ63P + FXFQ80P.) Cooling: Indoor temp. of 7 C DB, 9.0 C WB, and outdoor temp. of 35.0 C DB. : Indoor temp. of 0 C DB, and outdoor temp. of 7 C DB, 6 C WB. Lower operation sound is achieved in cooling operation! VRVII-S Previous model RXYM-MVM Cooling 4 HP 5 -db 5 0 5 HP 5 -db 5 Capacity % Load % Operation sound db Mode. 00 0 47 44 4 4 HP 5 HP 6 HP 4 HP 5 HP 6 HP Automatic mode Peak in outdoor temperature Step max. - 3dB ( 4 HP/. ) Step max. - 6dB ( 4 HP/. ) 8 hrs 0 hrs (Initial setting) Step 3 max. - 9dB ( 4 HP/. ) Night mode starts (Initial setting) Night Mode Step : 47 db Step : 44 db Step 3: 4 db Night mode ends High COP achieved in all ranges! db reduced in each model! 8:00 :00 6:00 0:00 0:00 4:00 8:00 Note: This function is available in setting at site. The relationship of outdoor temperature (load) and time shown in the graph is just an example. The capacity reduction rate differs depending on the operation sound level step selected. A collection of cutting-edge technologies realises efficient and quiet operation. 3 4 5 Improving the high efficiency compressor to achieve a higher COP Reluctance DC Scroll Compressor Overheating losses are reduced by pressurising the area around the motor, boosting energy saving performance in conjunction with other features. High thrust mechanism By introducing high pressure oil, the reactive force from the fixed scroll is added to the internal force, thereby reducing thrust losses. This results in improved efficiency and suppressed sound levels. >> Powerful magnets Use of neodymium magnets in the motor enables efficient generation of high torque, reducing the size of the compressor. Ferrite magnet Neodymium magnet Neodymium magnets are much more powerful than the coonly used ferrite magnets. >> Stronger materials The strength of the casing has been increased by boosting the internal dome pressure. Smooth Air Inlet Bell Mouth and Aero Spiral Fan These two features work to significantly reduce noise. Guides are added to the bell mouth intake to reduce turbulence in the airflow generated by fan suction. The Aero Spiral Fan features fan blades with the bent blade edges, further reducing turbulence. DC fan motor Efficiency improved in all areas compared to conventional AC motors, especially at low speeds. DC fan motor structure Reluctance DC motor >> Smooth sine wave DC inverter Use of an optimised sine wave smoothes motor rotation, further improving operating efficiency. Super Aero Grille Refined ventilation mechanism enables further reduction in required fan power. SC heat exchanger A larger sub-cooled area reduces refrigerant flow sound by making it easer to form a liquid seal in front of the electrical valve. Efficiency (%) Sine wave DC inverter >> Optimal refrigerant configuration Changes to the shape of the spiral and volume ratio result in optimal refrigerant layout. DC motor efficiency (comparison with a conventional AC motor) 00 80 60 40 0 Approx. 40% increase DC motor Approx. 0% increase AC motor 0 00 300 400 0 600 700 800 900 000 Motor speed (rpm) 4 With the bent blade edge 3 5 RX(Y)MQ4PVE RX(Y)MQ5PVE RX(Y)MQ6PVE Without the bent blade edge Escaping eddies are sucked in by the bent blade edges, reducing overall turbulence. Note: Data are based on studies conducted under controlled conditions at a Daikin laboratory. 6

MAIN FEATURES Design flexibility VR V III-S systems offer broad design flexibility with long refrigerant piping lengths and multiple indoor unit combinations, which provides generous freedom for office and shop design both inside and out. As many as 9 indoor units can be connected to a single outdoor unit Multiple indoor unit combinations are possible.* As many as 9 indoor units can be connected to a single outdoor unit, making the VRV III-S a remarkably versatile system. * Indoor units can be connected up to 30% of the capacity of the outdoor unit. For a 6 HP installation Long piping design possible The VRV III-S provides the long piping length possibility of m, with a total piping length of 300 m. If the outdoor unit is installed above indoor units the level difference can be up to a maximum of m. These generous allowances facilitate an extensive variety of system designs. Actual piping length Max. m 3 4 5 6 7 8 9 Total piping length Max. 300 m Max. units 9 * >> Max. 8 indoor units for a 5 HP installation >> Max. 6 indoor units for a 4 HP installation Max. 5 m Level difference between indoor units Max. m* Level difference Notes: *. 40 m when the outdoor unit is installed below indoor units. *. Maximum piping length between the indoor unit and the first branch is 40 m. Easy installation A variety of functions are provided that make installation easier, such as simple wiring and piping and automatic test operation. Easy wiring A new type of printed circuit board has been adopted that is easy to see and wire during installation. Automatic test operation Simply press the test operation button and the unit performs an automatic system check, including wiring, shutoff valves, and sensors. The results are returned automatically after the check finishes. Simple wiring and piping connection Unique piping and wiring systems make it possible to install a VRV III-S system quickly and easily. >> Super wiring system A super wiring system is used to enable shared use of the wiring between indoor and outdoor units and the central control wiring, with a relatively simple wiring operation. The DIII-NET counication system is employed to enable the use of advanced control systems. Central remote controller Outdoor unit Indoor unit >> REFNET piping system Previous model VRVII-S Daikin s advanced REFNET piping system makes installation easy. Only two main refrigerant lines are required in any one system. REFNET greatly reduces the imbalances in refrigerant flow between units, while using small-diameter piping. Wide operation temperature range Certified operation temperature range Easy maintenance The versatile operation range of the VRV III-S system works to reduce limitations on installation locations. The operation temperature range for heating goes all the way down to -0 C, while cooling can be performed with outdoor temperatures as high as 46 C. Both these achievements are due to the adoption of a high-pressure dome-type compressor. Outdoor temperature ( C DB) 40 30 0 0 0-0 46 C DB -5 C DB Cooling Outdoor temperature ( C WB) 0 5.5 C WB 0 0-0 -0 0 C WB VR V III-S features a self-diagnosis function for outdoor units that can determine the status of each component. Also, a new memory function helps to identify the problem if Memory function for operation data Operating data for the preceding 3 minutes is automatically stored in memory. Should a malfunction occur, this speeds up the process of identifying and fixing the cause of the problem. 7 8

CONTROL SYSTEMS Control systems Individual control systems The VR V III-S system uses the same DIII-NE T counication system as the VR V, enabling the use of advanced control systems. Wired remote controller (Option) Wireless remote controller (Option) BRCC6 Easier to read because LCD screen is larger. Digital display lets you set temperature in C units. Lets you individually prograe by timer the respective times for operation start and stop within a maximum of 7 hours. Equipped with a thermostat sensor in the remote controller that makes possible more comfortable room temperature control. Enables you to select cool/heat/fan operation mode with the indoor remote controller of your choice without using the cool/heat selector. Constantly monitors malfunctions in the system for a min. of 40 items, and is equipped with a "self-diagnosis function" that lets you know by message iediately when a malfunction occurs. Lets you carry out various field settings by remote controller. Enables you to select the ventilation mode and the volume of the HRV. The rubber switch and the oil-resisting resin casing have been adopted for durability. * When the auto-swing function is not available, the message, THIS FUNCTION IS NOT AVAILABLE is displayed when the wind direction adjustment button is pressed. Wireless remote controller Signal receiver unit (Separate type) The same operation modes and settings as with wired remote controllers are possible. A light receiver unit for a Cassette (Round Flow, Double Flow) type, Ceiling Suspended type and Wall Mounted type is mounted into the indoor unit. Signal receiver unit can be installed on the panel ex. Cassette (Round Flow) type Signal receiver unit (Installed type) Wired remote controller with weekly schedule timer (Option) BRCD6 Adds advanced functions to those of the above wired remote controller. Includes ventilation mode and airflow rate switching, the main functions of HRV series. 4-hour clock function (-hour backup for power failures) Prograing function for each day of week. Scheduling possible of start/stop and temperature limit (5 settings/day) Prograing can be enabled or disabled. Copy function for prograed schedules. Notes:. Standard remote controllers (BRCC6) not required.. If the BRCD6 is connected to the centralised remote controllers (DCS303A5, DCS30CA6,DCS30BA6, DST30BA6), the schedule function is not available. The wired remote controller supports a wide range of control functions Control of Cool/Heat changeover In all the series of VRV, Cool/Heat changeover in the same refrigerant circuit can be changed by the remote controller of the indoor unit. Outdoor unit Remote controller Equipment related to the central control Remote controller Group control One remote controller can control the operation of max.6 indoor units at the same time. Indoor unit The indoor unit can be connected by the two remote controller, for example one in the room and the other one in the control room, which can control the operation of indoor unit freely. (The last coand has a priority.) Of course, the group control by two remote controller is also possible. Control by two remote controller Remote control The wiring of remote controller can be extended to max. 0 m and it is possible to install the remote controllers for the different indoor units in one place. * Refer to page 35 for the name of each model. Simple remote controller (Option) Exposed type (BRCC5) Concealed type (For hotel use) (BRC3A6) The remote controller has centralised its frequently used operation selectors and switches (on/off, operation mode, temperature setting and airflow volume), making itself suitable for use in hotel rooms or conference rooms. The exposed type remote controller is fitted with a thermostat sensor. Wide variation of remote controllers for indoor units Wired remote controller (BRCC6) Wired remote controller with weekly schedule timer (BRCD6) Wireless remote controller* (Installed signal receiver unit) The concealed-type remote controller smartly fits into a night table or console panel in a hotel room. FXFQ FXCQ FXKQ FXDQ FXSQ FXMQ FXHQ FXAQ FXL(N)Q FXUQ Remote controller Remote controller Remote controller Remote controller Remote controller HRV Forced OFF input Remote controller 3 Control for the combined operation The operation of HRV can be controlled by the remote controller of the indoor unit. Of course, the remote controller can display the time to clean the filter. 4 Expansion of system control Wireless remote controller* (Separate type signal receiver unit) Simple remote controller (Exposed type) (BRCC5) 3 4 The system can be expanded to add several controllers, such as BMS, Forced OFF input and etc. Simple remote controller (Concealed type: for Hotel use) (BRC3A6) 9 Refer to page 7 for the total number of indoor units that can be connected to the outdoor unit. * Refer to page 35 for the name of each model. 0

CONTROL SYSTEMS Centralised control systems Up to 64 groups of indoor units (8 units) can be centrally controlled. Optional controllers for centralised control can be combined and optimised in accordance with building scale and purpose. System integration with various air-conditioning peripheral equipment such as HRV (Heat Reclaim Ventilation) is easy. Wiring can be run up to a total length of km, and adapts easily to large-scale system expansion. New DCS303A5 Residential central remote controller* (Option) Max. 6 groups of indoor units can be easily controlled with the large LCD panel. Max. 6 groups (8 indoor units) controllable Large backlit LCD panel for easy readability ON/OFF, temperature settings and scheduling can be controlled individually for indoor units. All indoor units can be turned on or off at once with ALL button. Each group has a dedicated button for convenience. Outside temperature display * For residential use only. Cannot be used with other centralised control equipment. Central remote controller (Option) Unified on/off controller (DCS30BA6) Connection of up to 8 units possible Connectable number of centralised control equipment Address setting of central control can be performed from the remote controller. Independent and centralised control of HRV is possible. DCS30CA6 Max. 64 groups (zones) of indoor units can be controlled individually same as LCD Remote controller. Max. 64 groups (8 indoor units) controllable Max. 8 groups (8 indoor units) are controllable by using central remote controllers, which can control from different places. Zone control Malfunction code display Max. wiring length,000 m (Total:,000 m) Connectable with Unified ON/OFF controller, schedule timer and BMS system Airflow volume and direction can be controlled individually for indoor units in each group operation. Ventilation volume and mode can be controlled for Heat Reclaim Ventilation (HRV). Up to 4 ON/OFF pairs can be set per day by connecting a schedule timer. Central remote controller units Group control of up to 6 units is possible (group control via automatic address setting) Unified on /off controller Schedule timer 8 units unit Unified ON/OFF controller (Option) Max. 6 groups of indoor units can be operated simultaneously/individually. Forced shut-down input Central remote controller (DCS30CA6) Up to units connectable Schedule timer (DST30BA6) unit connection possible ; 8 weekly schedule control patterns possible System without remote control is also available. Interface adaptor for SkyAir series (built-in indoor unit) (DTA0A5) 6 cores 7 cores max. Unification adaptor for computerised control * (DCS30A5) Central control adaptor kit (DTA07A55).. Refer to page 7 for the total number of indoor units that can be connected to the outdoor unit. Certain indoor units limit the functions of some control systems. For more details, please refer to the Engineering Data. Wiring adaptor for other airconditioners (DTA03A5) Outdoor-air processing unit can be connected. Interlink Building Management System (host computer monitor panel) also possible DCS30BA6 DST30BA6 Max. 6 groups (8 indoor units) controllable remote controllers can be used to control from different places. Operating status indication (Normal operation, Alarm) Centralised control indication Max. wiring length,000 m (Total:,000 m) Compact size casing (Thickness: 6 ) Connectable with Central Remote controller, Schedule timer and BMS system Schedule timer (Option) Max. 8 indoor units can be operated as prograed schedule. Max. 8 indoor units controllable When used in combination with a central remote controller, a maximum of 8 weekly schedule patterns can be set, while the central controller can be used to select desired zones. Up to ON/OFF pairs can be set per day. Max. 48 hours back up power supply Max. wiring length,000 m (Total:,000 m) Compact size casing (Thickness: 6 ) Connectable with Central Remote controller, Unified ON/OFF controller and BMS system

CONTROL SYSTEMS Advanced control systems New counication functions in the user-friendly icon-based multilingual controller simplify centralised control of the VRV system. Colour LCD touch panel icon display Small manageable size Simplified engineering Multi language (English, French, Italian, German, Spanish and Chinese) Yearly schedule PPD (Power Proportinal Distribution function) (Option) Auto heat/cool change-over Temperature limitation Enhanced history function Air Conditioning Network Service System (Optional Maintenance Service) Simple Interlock Function Function Support for centralised control from elsewhere using a PC with a Web browser (Option) Function Sending of e-mail alerts to a specified address when malfunctions occur (Option) Function 3 Built-in modem for connecting to Air Conditioning Network Service System (Option) Function 4 Doubling of number of connectable indoor units by adding a D -NET Plus Adaptor (Option) Function 5 Management of facilities/equipment other than A/C units(by adding Dio unit or Di unit) Function 6 Simple Interlock Function CSV output of power proportional distribution results (Option) PCMCIA Flash Memory Dio Unit DEC0A5 Dio Unit DEC0A5 Function 5 Function System Input (Lights) Input (Key signal - General purpose ADP) Set temperature change coand OFF coand Function 6 Remote monitoring and control Air Conditioning Network Service System modem for connections Function Function 3 Trouble reports Mobile Phone PC Public phone line Pi Port Connection to power consumption meter when using power proportional distribution function. (Option) S ys te m C ompone nts ACC center Air Conditioning Network Service System RS-3C D -NET Plus Adaptor DCS60A5 (option) Indoor Unit Number of indoor units expanded from 64 to 8. D -NET HRV Function 4 3 4

INDOOR UNIT LINEUP Model name Cassette (Round Flow) New FXFQ-PVE Cassette (Double Flow) FXCQ-MVE Cassette Corner FXKQ-MAVE FXDQ-PVE (700 width type) Slim Ceiling Mounted Duct Capacity Range Capacity Index 0.8 HP HP. HP.6 HP HP.5 HP 3. HP 4 HP 5 HP 0 3. 40 6.5 80 00 Cassette (Round Flow) FXFQP/FXFQ3P/FXFQ40P New FXFQP/FXFQ63P/FXFQ80P FXFQ00P/FXFQP GOOD DESIGN AWARD IN JAPAN with drain pump 360 airflow improves temperature distribution and offers a comfortable living environment. FXDQ-PVET without (700 drain width type) pump The industry s first* Round Flow Cassette type offers 360 airflow with improved temperature distribution. FXDQ-NAVE with (900/,00 drain width type) pump Round Flow 4-way flow FXDQ-NVET without (900/,00 drain width type) pump Built-in Duct There are areas of uneven temperature. FXSQ-MVE There are much fewer areas of uneven temperature. * As of April 004, the releas e date for J apan. All models are lighter than the conventional ones. Ex: Models FXFQP-P are 4.5 lighter (reduced from 4 to ). New FXMQ-PVE Ceiling Suspended FXHQ-MAVE Wall Mounted FXAQ-MAVE Floor Standing FXLQ-MAVE Drain pump is equipped as standard accessory, and the 8 lift height has been improved from 7 to 8. A modern sophisticated decoration panel has been applied, with a panel surface that has been treated with a dirt-repellant coating. Treated surface Untreated surface Dirt and grime C ondition after exposure to the smoke of 600 cigarettes in m3 enclosed space. Resists soiling Concealed Floor Standing FXNQ-MAVE Control of the airflow rate has been improved from -step to 3-step control. Note: R-40A VRV system indoor units are not compatible with the R- VRV system. Low operation sound level Connection unit series indoor units ( Hz only) Ceiling Suspended Cassette Model name Capacity Range Capacity Index Connection Unit 0.8 HP HP. HP.6 HP HP 0 3. 40 FXUQ-MAV Note: BEV units are necessary for Connection unit series indoor units. Refer to the Engineering Data for details. 5 3 HP 4 HP 5 HP 7 00 BEVQ7MAVE BEVQ00MAVE BEVQMAVE FXFQ-P Sound level (HH/H/L) 3 30/8.5/7 40 (db(a)) 63 80 00 3/9/7 3//7 34/3/8 36/33.5/3 43/37.5/3 44/39/34 Example of airflow patterns: All-round flow A new antibacterial treatment that uses silver ions has been applied to the drain pan, preventing the growth of slime, mould and bacteria that cause blockages and odours. The horizontal louvres prevent dew condensation. Their non-flocking surfaces, which repel dirt, are easy to clean. The air filter has an anti-mould and antibacterial treatment that prevents the growth of mould generated from dust or moisture that may adhere to the filter. 4-way flow 3-way flow L-shaped -way flow 360 airflow is available, as well as - to 4-way flows, so you can choose the most suitable airflow pattern depending on location or room layout. Note: Whatever the discharge direction, the same type of panel is used. If installing for other than all-round flow, an air discharge outlet sealing member (option) must be used to close each unused outlet. 6

INDOOR UNIT LINEUP Cassette (Double Flow) Cassette Corner FXCQ0M/FXCQM/FXCQ3M FXCQ40M/FXCQM/FXCQ63M FXCQ80M/FXCQM FXKQMA/FXKQ3MA FXKQ40MA/FXKQ63MA Thin, lightweight, and easy to install in shallow ceiling spaces Slim design for flexible installation The low profile unit (only 3 high) can be installed in a ceiling space as shallow as 355. All models feature a compact design with a depth of only 600. FXCQ-M 0 3 (When a high-efficiency filter is attached, the unit's height is 400.) Low operation sound level Sound level (H/L) 0V 3/7 34/8 34/9 37/3 39/34 44/38 40V /3 40/ 63 80 (db(a)) 34/9 36/30 37/3 39/34 4/36 46/40 Designed with higher airflow suitable for high ceiling application up to 3 metres. Single-flow type allows effective air discharge from corner or from drop-ceiling. Providing 3 different settings of standard, draft prevention and ceiling soiling prevention, the auto swing mechanism achieves even distribution of airflow and room temperature. (m) 3 8 C 3 C 30 C 6 C 4 C C 0 C 0 3 4 5 6 (m) Drain pump is equipped as standard accessory with 0 lift. Front discharge is possible with a air discharge unit (option), which allows the installation in the drop-ceiling or sagging wall. Main body Set for front discharge using a suspended ceiling. Main body 0 Downward discharge Air discharge grille (option) Providing different settings of standard and ceiling soiling prevention, the auto swing mechanism achieves even distribution of airflow and room temperature. Drain pump is equipped as standard accessory with 600 lift. 600 Two types of optional high-efficiency filter are available (65% and 95% NBS). A long-life filter (maintenance free up to one year) is equipped as standard accessory. Major maintenance work can be performed by removing the panel. A flat-type suction grille and a detachable blade make cleaning easy. Air discharge grille (option) Downward discharge is shut off and air is blown straight out (front discharge). Slim body needs only 0 space above the ceiling. If you use a panel spacer (option), the unit can be installed in the minimum space of 95. Min.95 0 Panel spac er A long-life filter (maintenance free up to one year) is equipped as standard accessory. 7 8

INDOOR UNIT LINEUP Slim Duct Slim design, quietness and static pressure switching Built-in FXSQ0M/FXSQM/FXSQ3M FXSQ40M/FXSQM/FXSQ63M FXSQ80M/FXSQ00M/FXSQM Suited to use in drop-ceilings! FXDQ0P/FXDQP/FXDQ3P FXDQ0N(A)/FXDQN(A)/FXDQ3N(A) FXDQ40N(A)/FXDQN(A)/FXDQ63N(A) Highly flexible for various application Only 700 in width and 3 in weight, this model is suitable to install in limited spaces like drop-ceilings in hotels. Great for hotel use! Only 700 00 Only 00 in height, this model can be installed in rooms with as little as 40 depth between the drop-ceiling and ceiling slab. 900 00,00 in width for the FXDQ63N(A) model. Highly flexible installation is possible with a complete lineup of optional kits to satisfy various needs, such as the design concept, interior decoration and so on. The unit can be installed, if there is a space of 3 above ceiling. (when suction panel is used.) Min. 3 Installation examples ( Optional parts) Standard With duct (case ) S c reening door Ac c ess panel Long-life filter Cassette style (standard filter) Air suc tion panel Cassette style (high efficiency filter) Air suc tion panel Long-life filter Air suc tion c anvas bellows High effic ienc y filter Air suc tion c anvas bellows AIR Suspension bolt* Air filter 40 Drain pump is equipped as standard accessory with 0 lift. With duct (case ) Ac c ess panel Long-life filter S c reening door Ceiling return Ac c ess panel Long-life filter Discharge grille* AIR Suction grille* *: To be obtained locally 0 High external static pressure allows the use of even flexible ducts of various length. Low operation sound level FXDQ-P(NA) Sound level (H/L) 0 33/9 33/9 3 33/9 40 34/30 35/3 (db(a)) 63 36/3 The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 db. Values are based on the following conditions: FXDQ-P: external static pressure of 0 Pa; FXDQ-N(A): external static pressure of 5 Pa. External static pressure selectable by remote controller switching make this indoor unit a very comfortable and flexible model. 0 Pa-30 Pa/factory set: 0 Pa for FXDQ-P models. 5 Pa-44 Pa/factory set: 5 Pa for FXDQ-N(A) models. FXDQ-P and FXDQ-N(A) models are available in two types to suit different installation conditions FXDQ-PVE, FXDQ-NAVE: with a drain pump (7 lift) as a standard accessory FXDQ-P(N)VET: without a drain pump 7 Ceiling Low operation sound level FXSQ-M Sound level (H/L) 0 3 0V 37/3 37/3 38/3 38/3 4/36 4/35 43/37 43/37 46/4 40V 39/34 39/34 40/34 40/34 43/38 44/37 45/39 45/39 48/43 Two types of optional high-efficiency filter are available (65% and 95% NBS). A long-life filter (maintenance free up to one year) is equipped as standard accessory. 40 63 80 00 (db(a)) 9 0

INDOOR UNIT LINEUP Duct Ceiling Suspended New FXMQ40P/FXMQP FXMQ63P/FXMQ80P FXMQ00P/FXMQP FXHQ3MA/FXHQ63MA FXHQ00MA Middle and high static pressure allows for flexible duct design Slim body with quiet and wide airflow A DC fan motor increases the external static pressure capacity range to include middle to high static pressures, increasing design flexibility. 30 Pa 60 Pa for FXMQ40P Pa 00 Pa for FXMQP-P Adoption of newly designed QUIET STREAM FAN Uses the quiet stream fan and many advanc ed tec hnologies. S ound absorption material All models (FXMQ40P-P) are only 300 in height, an improvement over the 390 height of conventional models. The weight of the FXMQ40P has been reduced from 44 to 8. Turbulent flow is produc ed Quiet stream fan S traightening vane 300 E asy installation in buildings with narrow c eiling spac es Low operation sound level FXHQ-MA Sound level (H/L) 3 36/3 (0 V-40 V)(dB(A)) 63 39/34 00 45/37 Drain pump is equipped as standard accessory with 700 lift. 700 Installation is easy Drain pump kit (option) c an be easily inc orporated. Control of the airflow rate has been improved from -step to 3-step control. Low operation sound level FXMQ-P Sound level (HH/H/L) 40 39/37/35 4/39/37 4/40/38 43/4/39 00 Energy-efficient The adopted DC fan motor is muc h more effic ient than the c onventional AC motor, yielding an approximate 0% dec rease in energy c onsumption. (FXMQP) 63 80 Ceiling (db(a)) 44/4/40 Improved ease of installation Airflow c an be c ontrolled using a remote c ontroller. With the c onventional model, the airflow rate was c ontrolled from the PC board. It is automatic ally adjusted to the range between approximately ±0% of the Improved ease of maintenance The drain pan c an be detac hed for easy c leaning. A new antibac terial treatment that uses silver ions has been applied to the drain pan, preventing the growth of slime, mould and bac teria that c aus e bloc kages and odours. 00 600 Drain pump kit (built inside main unit) Wide air discharge openings produce a spreading 00 airflow. Maintenance is easy Non-dew Flap with no implanted bris tles B ristle-free Flap minimises c ontamination and makes c leaning simpler. E as y-to-c lean flat des ign Non-dew Flap Maintenanc e is easier bec ause servic ing c an be performed from below the unit. A long-life filter (maintenanc e free up to one year) is equipped as standard

INDOOR UNIT LINEUP Wall Mounted Floor Standing FXAQ0MA/FXAQMA FXAQ3MA/FXAQ40MA FXAQMA/FXAQ63MA FXLQ0MA/FXLQMA FXLQ3MA/FXLQ40MA FXLQMA/FXLQ63MA Sophisticated design and compact casing harmonised with your interior décor Compact and stylish design that does not detract from the décor of the room. More compact when compared with previous model. (FXAQMA-63MA) 70 Suitable for perimeter zone air conditioning Floor Standing types can be hung on the wall for easier floor cleaning. Running the piping from the back allows the unit to be hung on walls. Cleaning under the unit, where dust tends to accumulate, is considerably easier. The adoption of a fibre-less discharge grille featuring an original design to prevent condensation also helps prevent staining and makes cleaning easier. 90,0 00 Drastic 0 weight reduc tion from 4 to 4. Volume reduc ed by %. S pac e savings of up to 47%. Low operation sound level FXAQ-MA Sound level (H/L) 0 35/9 36/9 37/9 (0 V-40 V)(dB(A)) 40 63 39/34 4/36 Drain pan and air filter can be kept clean by mildew-proof polystyrene. 3 46/39 A long-life filter (maintenance free up to one year) is equipped as standard accessory. Concealed Floor Standing FXNQ0MA/FXNQMA FXNQ3MA/FXNQ40MA FXNQMA/FXNQ63MA Wall hanging Floor installation Washable grille, the front grille can be easily removed for washing. Auto-swing maintains efficiency of air distribution. The louvre closes automatically when the unit stops. 5 steps of discharge angle can be set by remote controller. Discharge angle is automatically set at the same angle as the previous operation when restarting. (Initial setting; 0 for cooling and 70 for heating) Drain pump kit is available as optional accessory, which lifts the drain,000 from the bottom of the unit. Height of drain-up,000 Drain pump kit Indoor unit Flexible installation. Drain pipe c an be fitted to from either left or right s ides. Designed to be concealed in the perimeter skirting-wall The unit is concealed in skirting-wall of perimeter, that enables to create high class interior design. The connecting port faces downward, greatly facilitating on-site piping work. A long-life filter (maintenance free up to one year) is equipped as standard accessory. C onnec ting port R efrigerant piping Applies also to Floor Standing type (FXNQ-MA). 3 4

INDOOR UNIT LINEUP SPECIFICATIONS Ceiling Suspended Cassette ( Hz only) FXUQ7MAV FXUQ00MAV FXUQMAV This thin indoor unit achieves optimum air distribution, and can be installed without the need for ceiling cavity Depending on installation site requirements or room conditions, -way, 3-way and 4-way discharge patterns are available. 4-way airflow from the centre of the store. The 3-way airflow can distribute comfortable air throughout the room. INDOOR UNITS C e ilin g M o u n te d C a s s e tte ( R o u n d F lo w ) T y p e Cooling capacity capacity MODEL kcal/h(*) Btu/h(*) kcal/h Btu/h (*) (*) ( Hz/60 Hz) Airflow rate (HH/H/L) Sound level (HH/H/L) Dimensions (HXWXD) Machine weight m 3 /min cfm Piping connections Liquid (Flare) Panel (Option) Dimensions (HXWXD) Drain piping weight db(a) Gas (Flare) Model Colour FXFQPVE FXFQ3PVE FXFQ40PVE FXFQPVE FXFQ63PVE FXFQ80PVE FXFQ00PVE FXFQPVE,0 9,900.9,800 0,900 3. Galvanised steel plate 46X840X840 46X840X840 46X840X840 46X840X840 46X840X840 46X840X840 88X840X840 88X840X840 VP (External Dia, 3/Internal Dia, ) BYCPK-W Fresh white X9X9 X9X9 X9X9 X9X9 X9X9 X9X9 X9X9 X9X9 5.5 3,00,600 3.7 3,400 3,600 4.0 3/.5/0 3/.5/0 30/8.5/7 30/8.5/7 5.5 -phase, 0-40 V/0 V, /60 Hz 4,000 6,000 4.7 4,300 7,00 5.0 459/406/353 459/406/353 530/459/388 565/477/388 67/583/477 74/636/530,30/98/706,65/989/794 3/9/7 5.5 5,000 9,800 5.8 5,400,0 6.3 3//7 5.5 6,300 4,900 7.3 6,900 7,300 34/3/8 5.5 8,000 3,700 9.3.8 3.6 4.5 5.6 7. 9.0 8,600 34,00 0.0 5/3/ 6/3.5/ 9/6.5/3.5 /8/5 36/33.5/3 43/37.5/3 5.5 0,000 39,600.6 0,800 4,700.5 5.5,0 49,0 4.5. 4.0 3,800 54,600 0.033/0.03 0.033/0.03 0.047/0.04 0.05/0.0 0.066/0.063 0.093/0.09 0.87/0.86 0.09/0.08 0.07/0.07 0.07/0.07 0.034/0.034 0.038/0.038 0.053/0.053 0.075/0.075 0.74/0.74 0.00/0.00 3/6/0 6.0 33/8/.5 44/39/34 5.5 Only one unit is needed to distribute comfortable air throughout an L-shaped store. Connection unit Liquid pipe Refrigerant piping layout VR V -S series outdoor unit G as pipe Piping length* Connection unit is the device for connecting above indoor unit to VRV III-S. BEVQ7MAVE/BEVQ00MAVE/BEVQMAVE Connection unit for indoor unit BEVQ-MAVE Indoor unit External wiring layout S uper wiring ( DIII-NE T ) S ingle-phase 0-40 V power supply Indoor unit R emote c ontroller * Model FXUQ-MAV Maximum piping length between the BEV unit and the indoor unit. 5 m Notes: When connecting centralised-control device, it is necessary to install an interface adaptor for an indoor unit (DTA0A5). Connection unit BEVQ-MA is necessary for each indoor unit. The refrigerant piping height difference between the indoor units and the BEV unit must be within 4 m. The BEV unit must be installed within a maximum height difference between indoor units of 5 m. Branching of the refrigerant piping is not possible downstream of the BEV unit. C e ilin g M o u n te d C a s s e tte ( D o u b le F lo w ) T y p e Cooling capacity capacity MODEL kcal/h(*) Btu/h(*) kcal/h Btu/h (*) (*) ( Hz/60 Hz) Airflow rate (H/L) Sound level (H/L) Dimensions (HXWXD) Machine weight m 3 /min cfm Piping connections Liquid (Flare) Panel (Option) Dimensions (HXWXD) db (A) Drain piping weight 0V 40V Gas (Flare) Model Colour FXCQ0MVE FXCQMVE FXCQ3MVE FXCQ40MVE FXCQMVE FXCQ63MVE FXCQ80MVE FXCQMVE,000 7,800.3,00 8,0.5 7/5 47/77 3/7 305X775X600 6.0 53X,030X680,0 9,900.9,800 0,900 3. 9/6.5 38/30 34/8 305X775X600 6.0 BYBC3G-W 53X,030X680 -phase, 0-40 V/0 V, /60 Hz 3,00,600 3.7 3,400 3,600 4.0 9/6.5 38/30 34/8 305X775X600 6.0 Galvanised steel plate VP (External Dia, 3/Internal Dia, ) 53X,030X680 4,000 6,000 4.7 4,300 7,00 5.0 /9 44/38 34/9 305X990X600 3.0 BYBCG-W White (0Y9/0.5) 53X,45X680 8.5 5,000 9,800 /9 44/38 34/9 305X990X600 3.0 53X,45X680 8.5 6.5/3 58/459 37/3 305X,75X600 35.0 BYBC63G-W 53X,430X680 6/ 98/74 39/34 305X,665X600 47.0 53X,90X680.0 BYBCG-W 33/,65/883 44/38 34/9 36/30 36/30 37/3 37/3 39/34 4/36 46/40 5.8 5,400,0 6.3 6,300 4,900 7.3 6,900 7,300 8,000 3,700 9.3 8,600 34,00 0.0,0 49,0 4.5..8 3.6 4.5 5.6 7. 9.0 4.0 3,800 54,600 0.077/0.08 0.09/0.095 0.09/0.095 0.30/0.3 0.30/0.3 0.6/0.57 0.09/0.6 0.6/0.78 0.044/0.048 0.059/0.06 0.059/0.06 0.097/0.099 0.097/0.099 0.6/0.4 0.76/0.83 0.3/0.45 6.0 305X,665X600 4 53X,90X680 Note : Specifications are based on the following conditions; Cooling : (*) Indoor temp. of 7- CDB, CWB, and outdoor temp. of 35.0 CDB. (*) Indoor temp. of 7 CDB, 9.0 CWB, and outdoor temp. of 35.0 CDB. : Indoor temp. of 0 CDB, and outdoor temp. of 7 CDB, 6 CWB. Equivalent piping length : 7.5 m Level difference : 0 m Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See ENGINEERING DATA for details.) Sound level : Anechoic chamber conversion value, measured at a point.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions..0 6

SPECIFICATIONS 7 INDOOR UNITS C e ilin g M o u n te d C a s s e tte C o r n e r T y p e FXKQMAVE FXKQ3MAVE FXKQ40MAVE FXKQ63MAVE -phase, 0-40 V/0 V, /60 Hz Cooling capacity kcal/h(*),0 3,00 4,000 6,300 Btu/h(*) 9,900,600 6,000 4,900 (*).9 3.7 4.7 7.3 (*).8 3.6 4.5 7. capacity kcal/h,800 3,400 4,300 6,900 Btu/h 0,900 3,600 7,00 7,300 3. 4.0 5.0 0.066/0.069 0.066/0.069 0.076/0.09 0.05/0.0 ( Hz/60 Hz) 0.046/0.049 0.046/0.049 0.056/0.07 0.085/0.00 Galvanised steel plate Airflow rate (H/L) m 3 /min Hz /9 /9 3/0 8/5 cfm Hz 388/38 388/38 459/353 635/530 Sound level (H/L) db 0V 38/33 38/33 40/34 4/37 (A) 40V 40/35 40/35 4/36 44/39 Dimensions (HXWXD) X,0X70 X,0X70 X,0X70 X,30X70 Machine weight 3.0 3.0 3.0 34.0 Piping connections Liquid (Flare) Gas (Flare) Drain piping VP (External Dia, 3/Internal Dia, ) Panel (Option) Model Colour BYK45FJW White (0Y9/0.5) BYK7FJW Dimensions (HXWXD) weight 70X,40X800 8.5 70X,40X800 8.5 70X,40X800 8.5 70X,440X800 S lim C e ilin g M o u n te d D u c t T y p e ( 7 0 0 m m w id th ty p e ) MODEL Cooling capacity capacity Airflow rate (H/L) External static pressure Sound level (H/L) Dimensions (HXWXD) Machine weight MODEL Power consumption (PVE: Hz/60 Hz) 3 with drain pump without drain pump kcal/h(*) Btu/h(*) kcal/h Btu/h (*) Cooling (PVET: Hz/60 Hz) m 3 /min cfm Pa db(a) Piping connections Liquid (Flare),000 7,800 (*). Gas (Flare) FXDQ0PVE FXDQPVE FXDQ3PVE FXDQ0PVET FXDQPVET FXDQ3PVET,00 8,0,0 9,900,800 0,900 Galvanised steel plate 3,00,600 3,400 3,600.5 3. 4.0 0.086/0.09 0.086/0.09 0.089/0.095 0.067/0.073 0.067/0.073 0.070/0.076 / 8/6 -phase, 0-40 V/0 V, /60 Hz.3.9 3.7 / 8/6 / 8/6 33/9 33/9 33/9 00X700X60 3.0.8 3.6 0.067/0.073 0.067/0.073 0.070/0.076 0.067/0.073 0.067/0.073 0.070/0.076 30-0 00X700X60 3.0 Drain piping VP0 (External Dia, 6/Internal Dia, 0) 00X700X60 Note : Specifications are based on the following conditions; Cooling : (*) Indoor temp. of 7- CDB, CWB, and outdoor temp. of 35.0 CDB. (*) Indoor temp. of 7 CDB, 9.0 CWB, and outdoor temp. of 35.0 CDB. : Indoor temp. of 0 CDB, and outdoor temp. of 7 CDB, 6 CWB. : External static pressure is changeable to set by the remote controller. This pressure means "High static pressure - Standard". (Factory setting is 0 Pa.) : The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 db. 3 : Values are based on the following conditions: external static pressure of 0 Pa. Equivalent piping length : 7.5 m Level difference : 0 m Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See ENGINEERING DATA for details.) Sound level (FXKQ-MA) Anechoic chamber conversion value, measured at a point m in front of the unit and m downward. (FXDQ-P) Anechoic chamber conversion value, measured at a point.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions. 3.0 INDOOR UNITS S lim C e ilin g M o u n te d D u c t T y p e ( 9 0 0 /, 0 0 m m w id th ty p e ) MODEL Cooling capacity capacity kcal/h(*) Btu/h(*) C e ilin g M o u n te d B u ilt- in T y p e kcal/h Btu/h (*) (NAVE: Hz/60 Hz) Airflow rate (H/L) External static pressure Sound level (H/L) 3 Dimensions (HXWXD) Machine weight with drain pump without drain pump (NVET: Hz/60 Hz) m 3 /min cfm Pa db(a) Piping connections Liquid (Flare) MODEL FXDQ0NAVE FXDQNAVE FXDQ3NAVE FXDQ40NAVE FXDQNAVE FXDQ63NAVE FXDQ0NVET FXDQNVET FXDQ3NVET FXDQ40NVET FXDQNVET FXDQ63NVET,000 7,800 (*). Gas (Flare),00 8,0,0 9,900,800 0,900 3,00,600 3,400 3,600 4,000 6,000 4,300 7,00 Galvanised steel plate 5,000 9,800 5,400,0 6,300 4,900 6,900 7,300.5 3. 4.0 5.0 6.3 0./0.6 0./0.6 0./0.6 0.60/0.8 0.65/0.85 0.8/0.9 0.37/0.47 0.37/0.47 0.37/0.47 0.47/0.68 0.5/0.70 0.68/0.79 0.37/0.47 0.37/0.47 0.37/0.47 0.47/0.68 0.5/0.70 0.68/0.79 0.37/0.47 0.37/0.47 0.37/0.47 0.47/0.68 0.5/0.70 0.68/0.79 /7.5 335/65 /7.5 335/65 -phase, 0-40 V/0 V, /60 Hz.3.9 3.7 4.7 5.8 7.3 0.5/8.5 37/300 0.5/8.5 37/300.5/0.0 44/353 6.5/3.0 583/459 33/9 33/9 33/9 34/30 35/3 36/3 00X900X60 6.0.8 3.6 4.5 5.6 7. 00X900X60 6.0 00X900X60 6.0 44-5 00X900X60 7.0 Drain piping VP0 (External Dia, 6/Internal Dia, 0) 00X900X60 00X,00X60 FXSQ0MVE FXSQMVE FXSQ3MVE FXSQ40MVE FXSQMVE FXSQ63MVE FXSQ80MVE FXSQ00MVE FXSQMVE -phase, 0-40 V/0 V, /60 Hz Cooling capacity kcal/h(*),000,0 3,00 4,000 5,000 6,300 8,000 0,000,0 Btu/h(*) 7,800 9,900,600 6,000 9,800 4,900 3,700 39,600 49,0 (*).3.9 3.7 4.7 5.8 7.3 9.3.6 4.5 (*)..8 3.6 4.5 5.6 7. 9.0. 4.0 capacity kcal/h,00,800 3,400 4,300 5,400 6,900 8,600 0,800 3,800 Btu/h 8,0 0,900 3,600 7,00,0 7,300 34,00 4,700 54,600.5 3. 4.0 5.0 6.3 0.0.5 6.0 0.0/0.8 0.0/0.8 0.4/0.36 0.7/0.55 0.43/0.00 0.89/0.4 0.34/0.35 0.4/0.36 0.3/0.435 ( Hz/60 Hz) 0.090/0.08 0.090/0.08 0.094/0.6 0.07/0.35 0.3/0.80 0.69/0.34 0.4/0.95 0./0.306 0.30/0.45 Galvanised steel plate Airflow rate (H/L) m 3 /min Hz 9/6.5 9/6.5 /7.5/9 5/ /5.5 7/.5 8/ 38/8 cfm Hz 38/30 38/30 335/47 406/38 530/388 74/547 953/759 988/777,34/988 External static pressure Pa Hz 88-39-0 4 88-39-0 4 64-39-5 4 88-49-0 4 88-59-9 4 88-49-0 4 3-8 5 07-75 5 78-39 5 Sound level (H/L) db 0V 37/3 37/3 38/3 38/3 4/36 4/35 43/37 43/37 46/4 Hz (A) 40V 39/34 39/34 40/34 40/34 43/38 44/37 45/39 45/39 48/43 Dimensions (HXWXD) 300X5X800 300X5X800 300X5X800 300X700X800 300X700X800 300X,000X800 300X,400X800 300X,400X800 300X,400X800 Machine weight 30.0 30.0 30.0 30.0 3.0 4.0 5.0 5.0 5.0 Piping connections Liquid (Flare) Gas (Flare) Drain piping VP (External Dia, 3/Internal Dia, ) Panel(Option) Model BYBS3DJW BYBS3DJW BYBS3DJW BYBS45DJW BYBS45DJW BYBS7DJW BYBSDJW BYBSDJW BYBSDJW Colour White (0Y9/0.5) Dimensions 55X6X0 55X6X0 55X6X0 55X800X0 55X800X0 55X,00X0 55X,0X0 55X,0X0 55X,0X0 (HXWXD) weight 3.0 3.0 3.0 3.5 3.5 4.5 6.5 6.5 6.5 Note : Specifications are based on the following conditions; Cooling : (*) Indoor temp. of 7- CDB, CWB, and outdoor temp. of 35.0 CDB. (*) Indoor temp. of 7 CDB, 9.0 CWB, and outdoor temp. of 35.0 CDB. : Indoor temp. of 0 CDB, and outdoor temp. of 7 CDB, 6 CWB. : External static pressure is changeable to set by the remote controller. This pressure means "High static pressure - Standard". (Factory setting is 5Pa) : The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 db. 3 : Values are based on the following conditions: external static pressure of 5 Pa. 4 : External static pressure is changeable to change over the connectors inside electrical box, this pressure means "High static pressure-standard-low static pressure". 5 : External static pressure is changeable to change over the connectors inside electrical box, this pressure means "High static pressure-standard". Equivalent piping length : 7.5 m Level difference : 0 m Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See ENGINEERING DATA for details.) Sound level (FXDQ-N(A)) Anechoic chamber conversion value, measured at a point.5 m downward from the unit centre. (FXSQ-M) Anechoic chamber conversion value, measured at a point.5 m downward from the unit centre. 8 During actual operation, these values are normally somewhat higher as a result of ambient conditions. 3.0

SPECIFICATIONS C e ilin g M o u n te d D u c t T y p e Cooling capacity capacity INDOOR UNITS MODEL FXMQ40PVE FXMQPVE FXMQ63PVE FXMQ80PVE FXMQ00PVE FXMQPVE kcal/h(*) Btu/h(*) kcal/h Btu/h ( Hz/60 Hz) Airflow rate (HH/H/L) External static pressure Sound level (HH/H/L) Dimensions (HXWXD) Machine weight db (A) m 3 /min cfm Piping connections Liquid (Flare) Drain piping 4,000 6,000 (*) 4.7 4,300 7,00 5.0 6/3/ 565/459/388 39/37/35 300X700X700 5,000 9,800 5.8 5,400,0 6.3 8/6.5/5 635/58/530 4/39/37 Galvanised steel plate 300X,000X700 300X,000X700 300X,000X700 300X,400X700 300X,400X700 36.0 -phase, 0-40 V/0 V, /60 Hz 6,300 4,900 7.3 6,900 7,300 /7.5/6 688/68/565 4/40/38 36.0 8,000 3,700 9.3 8,600 34,00 0.0 /.5/0 883/794/706 43/4/39 36.0 VP (External Dia, 3/Internal Dia, ) 0,000 39,600.6 0,800 4,700.5 3/7/3,30/953/8,377/,65/98 43/4/39 46.0,0 49,0 (*) 4.5 5.6 7. 9.0. 4.0 4.5 3,800 54,600 6.0 39/33/8 Pa 30-60 -00-00 -00-00 -00 0V 40V Gas (Flare) 0.94/0.93 0./0.4 0.30/0.9 0.98/0.97 0.376/0.375 0.46/0.460 0.8/0.8 0.03/0.03 0.8/0.8 0.86/0.86 0.364/0.364 0.449/0.449 44/4/40 39/37/35 4/39/37 4/40/38 43/4/39 43/4/39 44/4/40 46.0 W a ll M o u n te d T y p e Cooling capacity capacity Airflow rate (H/L) MODEL Dimensions (HXWXD) Machine weight INDOOR UNITS kcal/h(*) Btu/h(*) kcal/h Btu/h m 3 /min cfm (*) (*) ( Hz/60 Hz) Sound level (H/L) db(a) Piping connections Liquid (Flare) Gas (Flare) Drain piping FXAQ0MAVE FXAQMAVE FXAQ3MAVE FXAQ40MAVE FXAQMAVE FXAQ63MAVE,000 7,800.3.9 3. 36/9 90X795X30.0 -phase, 0-40 V/0 V, /60 Hz,0 3,00 4,000 9,900,600 6,000 3.7 White (3.0Y8.5/0.5) 37/9 90X795X30.0 4.7..8 3.6 4.5,00 8,0.5 0.06/0.06 0.04/0.04 7.5/4.5 65/59 35/9 90X795X30.0,800 3,400 4,300 0,900 3,600 7,00 4.0 8/5 9/5.5 5.0 /9 8/77 38/94 44/38 39/34 90X,0X30 4.0 VP3 (External Dia, 8/Internal Dia, 3) 5,000 9,800 5,400,0 4/36 90X,0X30 4.0 6,300 4,900 7.3 6,900 7,300 0.0/0.0 0.07/0.07 0.00/0.00 0.07/0.07 0.0/0.0 0.07/0.07 0.03/0.03 0.00/0.00 0.03/0.03 0.060/0.060 5.8 5.6 6.3 5/ 9/4 530/44 7. 67/494 46/39 90X,0X30 4.0 9 C e ilin g S u s p e n d e d T y p e Cooling capacity capacity Airflow rate (H/L) Sound level (H/L) MODEL Dimensions (HXWXD) Machine weight kcal/h(*) Btu/h(*) kcal/h Btu/h ( Hz/60 Hz) m 3 /min cfm db(a) Piping connections Liquid (Flare) Gas (Flare) Drain piping FXHQ3MAVE 3,00,600 (*) 3.7 3,400 3,600 4.0 FXHQ63MAVE 6,300 4,900 7.3 6,900 7,300 White (0Y9/0.5) FXHQ00MAVE 0,000 39,600.6 (*) 3.6 7.. 0,800 4,700.5 /0 7.5/4 / 36/3 39/34 45/37 95X960X680 4.0 -phase, 0-40 V/0 V, /60 Hz 0./0.4 0.5/0.45 0.35/0.99 0./0.4 0.5/0.45 0.35/0.99 44/353 68/494 883/688 95X,60X680 VP0 (External Dia, 6/Internal Dia, 0) 95X,400X680 Note : Specifications are based on the following conditions; Cooling : (*) Indoor temp. of 7- CDB, CWB, and outdoor temp. of 35.0 CDB. (*) Indoor temp. of 7 CDB, 9.0 CWB, and outdoor temp. of 35.0 CDB. : Indoor temp. of 0 CDB, and outdoor temp. of 7 CDB, 6 CWB. : External static pressure can be modified using a remote controller that offers fourteen levels of control. These values indicate the lowest and highest possible static pressures. The standard static pressure is 00 Pa. Equivalent piping length : 7.5 m Level difference : 0 m Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See ENGINEERING DATA for details.) Sound level : (FXMQ-MA) Anechoic chamber conversion value, measured at a point.5 m downward from the unit centre. (FXHQ-M) Anechoic chamber conversion value, measured at a point m in front of the unit and m downward. During actual operation, these values are normally somewhat higher as a result of ambient conditions. 33.0 F lo o r S ta n d in g T y p e /C o n c e a le d F lo o r S ta n d in g T y p e FXLQ FXNQ Cooling capacity capacity Airflow rate (H/L) Sound level (H/L) MODEL Dimensions (HXWXD) Machine weight kcal/h(*) Btu/h(*) kcal/h Btu/h m 3 /min cfm (*) (*) ( Hz/60 Hz) db (A) 0V 40V FXLQ FXNQ FXLQ FXNQ Piping connections Liquid (Flare) Gas (Flare) Drain piping FXLQ0MAVE FXLQMAVE FXLQ3MAVE FXLQ40MAVE FXLQMAVE FXLQ63MAVE FXNQ0MAVE FXNQMAVE FXNQ3MAVE FXNQ40MAVE FXNQMAVE FXNQ63MAVE,000 7,800.3.,00 8,0 7/6 47/ 600X,000X.0,0 9,900.9.8,800 0,900 FXLQ: Ivory white (5Y7.5/) / FXNQ: Galvanised steel plate 7/6 47/ 600X,000X.0 -phase, 0-40 V/0 V, /60 Hz,600 8/ 388/300 494/388 565/44 O.D. Note : Specifications are based on the following conditions ; Cooling : (*) Indoor temp. of 7- CDB, CWB, and outdoor temp. of 35.0 CDB. (*) Indoor temp. of 7 CDB, 9.0 CWB, and outdoor temp. of 35.0 CDB. : Indoor temp. of 0 CDB, and outdoor temp. of 7 CDB, 6 CWB. Equivalent piping length : 7.5 m Level difference : 0 m Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See ENGINEERING DATA for details.) Sound level : (FXAQ-MA) Anechoic chamber conversion value, measured at a point m in front of the unit and m downward. (FXLQ-MA,FXNQ-MA) Anechoic chamber conversion value, measured at a point.5 m in front of the unit at a height of.5 m. During actual operation, these values are normally somewhat higher as a result of ambient conditions. 3,00 3.7 3.6 3,400 3,600 8/6 600X,40X 30.0 4,000 6,000 4.7 4.5 4,300 7,00.5 3. 4.0 5.0 /8.5 600X,40X 30.0 5,000 9,800 5.8 5.6 5,400,0 6.3 4/ 600X,40X 36.0 6,300 4,900 7.3 6,900 7,300 0.049/0.047 0.049/0.047 0.090/0.079 0.090/0.084 0.0/0.05 0.0/0.08 0.049/0.047 0.049/0.047 0.090/0.079 0.090/0.084 0.0/0.05 0.0/0.08 6/ 35/3 35/3 35/3 38/33 39/34 40/35 37/34 37/34 37/34 40/35 4/36 4/37 600X,40X 60X930X0 60X930X0 60X,070X0 60X,070X0 60X,3X0 60X,3X0 36.0 9.0 9.0 3.0 3.0 7.0 7.0 7. 30