PINK MAGNETIC RECUMBENT BIKE P8400 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877 - 90SUNNY (877-907-8669). 0
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level. 2. Be aware of your body s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program. 3. Keep children and pets away from the equipment. The equipment is designed for adult use only. 4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60CM) of free space all around it. 5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear. 6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified. 7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment. 8. Do not place fingers or objects into the moving parts of the equipment. 9. The maximum weight capacity of this unit is 220 pounds (100 KG). 10. The equipment is not suitable for therapeutic use. 11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required. 12. Your product is intended for use in cool and dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems. 13. This equipment is designed for indoor and home use only; it is not intended for commercial use! 1
EXPLODED DIAGRAM 1 2
EXPLODED DIAGRAM 2 HARDWARE PACKAGE #16 M10*60 4PCS #19 d10*φ25*2*r30 4PCS #37 M8*60 1PC #7 d8*φ20*2*r30 4PCS #8 M8*16 5PCS #32 d8*φ16*1.5 2PCS #20 M10 4PCS #31 M8 1PC #46 S17-19 #38 d8 2PCS #22 M16*1.5*27 1PC #45 S13-14-15 #44 S6 3
PARTS LIST No. Description Spec. Qty. No. Description Spec. Qty. 1 Computer 1 46 Spanner S17-19 1 1a Computer Wire 1 47 Fixing Plate t1.5*56*72 2 2 Screw M5*15 1 48 Screw M6*10*Φ12 5 3 Arc Washer d5*φ20*1*r30 1 49 Washer d 6*Φ16*1.5 3 4 Foam Grip Φ23*5*120 2 50 Bolt M6*12*S10 3 5 Handlebar Post 1 51 Screw M6*8*Φ12 1 6 End Cap Φ25*16 4 52 Inertial Axle 1 7 Arc Washer d8*φ20*2*r30 4 53 Idler Connecting Rod 1 8 Screw M8*16 17 54 Spring Φ2*Φ12*60*N20 1 9 Sensor Wire A 1 55 Nut M8*H7.5*S13 1 10 Sensor Wire B 1 56 Bearing 6001-2RS CXSH 2 11 Tension Control Cable 1 57 Idler Wheel 1 12 Sensor Wire C 1 58 Screw 1 13 Tension Hook 1 59 Washer D12*Φ17*0.5 1 14 Sensor Wire D 1 60L/R Crank Cap 2 15 End Cap Φ50 4 61 Screw ST4.2*19*Φ8 6 16 Bolt M10*60 4 62L/R Chain Cover 2 17 Front Stabilizer 1 63 Thin Nut 1 18L/R Pedal L/R 2 64 Washer D26*Φ38*1 1 19 Arc Washer d10*φ25*2*r30 4 65 Washer 1 20 Nut M10 4 66 Bearing Housing 2 21 Main Frame 1 67 Ball Bearing 2 22 Knob M16*1.5*27 1 68 Cap 1 23 Bushing Φ50 1 69 Nut M6*H5*S10 2 24 Sensor Wire E 1 70 Bolt M6*45*S10 1 25 Rear Main Frame 1 71 Sensor Seat 1 26 End Cap Φ50 2 72 Screw ST4.2*10*Φ8 1 27 Rear Stabilizer 1 73 Crank with Belt Wheel 1 28 Screw ST4*19 2 74 Round Magnet 1 29 Foam Grip Φ23*5*500 2 75 Belt 1 30 Handle Pulse Wire 1 76 Square Magnet 40*25*10 4 31 Nut M8 1 77 Magnet Locator 1 32 Washer d8*φ16*1.5 14 78 Magnetic Board 1 33 Grommet Φ12*Φ11*3 3 79 Spring Φ1.5*Φ15*41*N8 1 34 Handlebar 1 80 Bolt M6*16*S10 2 35 Hand Pulse Sensor 2 81 Spring Washer D6 2 36 End Cap F38*38*1.5 2 82 Washer D6*Φ12*1.2 2 37 Bolt M8*60 1 83 C Clip D12 2 38 Spring Washer d8 6 84 Axle for Magnetic Board 1 39 Backrest Frame 1 85 Screw ST3*10*Φ5.6 5 40 Seat Cushion 1 86 Inertial Wheel 1 41 Backrest Cushion 1 87 Bearing Seat 2 42 Screw M5*10 2 88 Bearing 6001-2RS C&U 2 43 Washer d6*φ12*1 2 89 Washer 1 44 Allen Wrench S6 1 90 Nut 1 45 Spanner S13-14-15 1 91 Screw ST4.2*20 4 Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) The product name (found on cover of manual) The part number found on the EXPLODED DIAGRAM and PARTS LIST (found near the front of the manual) Please contact us at support@sunnyhealthfitness.com or 1-877 - 90SUNNY (877-907-8669). 4
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 1: #16 M10*60 2PCS #19 d10*φ25*2*r30 2PCS #20 M10 2PCS #46 S17-19 Secure Front Stabilizer (No. 17) to Main Frame (No. 21) with 2 Bolts (No. 16), 2 Arc Washers (No. 19), and 2 Nuts (No. 20). #8 M8*16 4PCS #7 d8*φ20*2*r30 4PCS #44 S6 STEP 2: Connect Sensor Wire A (No. 9) with Sensor Wire C (No. 12). Then connect Sensor Wire B (No. 10) with Sensor Wire D (No. 14). (See diagram A to the left) b C NOTE: Turn the Tension Control Cable (No. 11) all the way to the left (the lowest level of resistance). This provides the tension cable with the longest length required to connect it. (See diagram C) a Connect Tension Hook (No. 13) with Tension Control Cable (No. 11). (See diagram B) Secure Handlebar Post (No. 5) to Main Frame (No. 21) with 4 Screws (No. 8) and 4 Arc Washers (No. 7). 5
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). #42 M5*10 2PCS a #45 S13-14-15 a STEP 3: Remove 2 preassembled Screws (No. 42) from the back of the computer. Connect Computer Wire (No. 1a) with Sensor Wire A (No. 9), then secure Computer (No. 1) to Handlebar Post (No. 5) with 2 Screws (No. 42). Insert Sensor Wire B (No. 10) into the back of Computer (No. 1). Secure Pedal (No. 18L/R) onto the left and right crank of Main Frame (No. 21). CAUTION: The left side of the machine has reversed threading. You must screw the left pedal counter-clockwise to tighten. The right pedal is tightened by turning clockwise. Failure to follow these instructions can result in permanent damage to your bike. #16 M10*60 2PCS #19 d10*φ25*2*r30 2PCS #20 M10 2PCS #8 M8*16 12PCS #32 d8*φ16*1.5 12PCS #38 d8 4PCS #46 S17-19 #44 S6 STEP 4: Secure the Rear Stabilizer (No. 27) to the Rear Main Frame (No. 25), with 2 Bolts (No. 16), 2 Arc Washers (No. 19), and 2 Nuts (No. 20). Parts No. 8, 38, 32 are preassembled on Rear Main Frame (No. 25). Simply unscrew and reattach with the Backrest Frame (No. 39). Secure Backrest Frame (No. 39) to Rear Main Frame (No. 25) with 4 Screws (No. 8), 4 Spring Washers (No. 38), and 4 Washers (No. 32). For easier installation of the next step, try flipping Rear Main Frame (No. 25) over. Secure Seat Cushion (No. 40) and Backrest Cushion (No. 41) to Backrest Frame (No. 39) with 8 Screws (No. 8) and 8 Washers (No. 32). Part No. 8 & 32 are preassembled on Seat Cushion (No. 40) and Backrest Cushion (No. 41). 6
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). #22 M16*1.5*27 1PC STEP 5: Connect Sensor Wire D (No. 14) with Sensor Wire E (No. 24), then secure the Rear Main Frame (No. 25) to the Main Frame (No. 21) with the Knob (No. 22). NOTE: There are different holes on the Rear Main Frame (No. 25) which can be used for people with different height. You can find the best position hole for your height. With feet at the extended position, your knee should bend at 15 degrees. #37 M8*60 1PC #32 d8*φ16*1.5 2PCS #31 M8 1PC #8 M8*16 1PC #38 d8 2PCS #44 S6 #45 S13-14-15 STEP 6: Secure Handlebar (No. 34) to Backrest Frame (No. 39) with 1 Bolt (No. 37), 1 Screw (No. 8), 2 Spring Washers (No. 38), 2 Washers (No. 32), and 1 Nut (No. 31). Connect Sensor Wire E (No. 24) with Handle Pulse Wire (No. 30). The assembly is complete! 7
EXERCISE COMPUTER FUNCTION BUTTONS: MODE: Press to select functions. Press and hold the MODE button for 3 seconds to reset time, distance, and calories. SET: Press to set values of time, pulse, distance, and calories when not in scan mode. Press the MODE button to cycle through functions: time, distance, and calories to select desired function. Use the SET button to set a value for time, distance, or calories. The value of a function will be set on a countdown. Press the MODE button once more, to save the function value you ve created. RESET: Press to reset time, pulse, distance, and calories to zero when not in scan mode. OPERATION FUNCTIONS: SCAN: Press MODE button until appears at SCAN position (or until SCAN appears), the computer will rotate through all 5 functions: Time, Speed, Distance, Calories, and Total Distance. Each display will be held for 6 seconds. TIME: Counts the total time of the exercise from start to finish. SPEED: Displays the current speed. DISTANCE (DIST): Counts the distance of an exercise from start to finish. CALORIES (CAL): Counts the number of total calories burned during an exercise from start to finish. TOTAL DISTANCE (ODO): Counts the total distance after installing the batteries. AUTO ON/OFF & AUTO START/STOP: If the wheel is in motion or if any button is pressed, the computer will become active and shall remain active until it s been inactive for 8 minutes. Then, the power (computer) will turn off automatically. PULSE RATE: Press MODE button until appears at PULSE position, (or until appears). To properly measure your pulse rate, you must place both your palms on the hand pulse sensors located on the handlebar next to the seat. Remark: During the process of pulse measurement, the measurement value may be higher than virtual pulse rate during the first 2~3 seconds, after which it will return to normal level. To ensure testing accuracy, it is suggested that user test pulse during stop/pause exercise to avoid any possible influence. The measurement value cannot be regarded as the basis of medical treatment. ALARM: The functions of time, distance, and calorie can be set to countdown, if any of the above value goes to zero, the computer will beep for 15 seconds. Press MODE to select the function, then press SET to adjust the value. 8
SPECIFICATIONS: FUNCTION Battery Type Auto Scan Running Time Current Speed Trip Distance Calories Total Distance Pulse Rate Every 6 seconds 00:00 ~ 99:59(Minute: Second) The max pick-up signal is 999.9 MILE/H (or 9999RPM) 0.0 ~ 999.9 MILE 0 ~ 9999 Kcal 0 ~ 9999 MILE 40-240BPM 2 pcs of SIZE- AAA Operating Temperature 0 ~ +40 (32 ~104 ) Storage Temperature -10 ~ +60 (14 ~140 ) BATTERY REPLACEMENT: The batteries are located on the back of the computer. To replace the batteries, open the battery cover. Remove the batteries. Replace with new batteries. Make sure the (-) end of the battery goes to the spring end in the battery compartment. Put the cover back. When changing batteries, always change both with new batteries. Do not mix old and new batteries. BATTERY DISPOSAL: Dispose the batteries according to the laws and regulations of your local region. Some batteries may be recycled. When disposing or recycling, do not mix battery types. Version 1.9 9