For architects, builders and planners The new way to convey energy and signals Hahn Türband 4 Inductio www.inductio.eu
THE AESTHETICS OF INVISIBLE FUNCTIONALITY
Inductio is a wireless path for transmitting energy and signals. Architects, builders, planners and door installers have had to accept the necessity of having a cable transition between door frames and leaves as a necessary evil until today. Damage to the profile and broken wires were deemed as inevitable. The Hahn Türband 4 Inductio now offers a path for transmitting signals and energy that withstood up to 10 million opening cycles carried out in load tests. With convincingly positive results. SECURITY AT ITS BEST. Test d'endurance Dauerfunktionstest Endurance test Cable breakage is now a thing of the past.
THE FIRST SYSTEM DESIGNED FOR CONDUCTING ENERGY AND SIGNALS WHICH HAS VdS-C CERTIFICATION IN THE FORM OF A DOOR HINGE The Inductio hinge makes it easier for door manufacturers and installers of safety installations to route cables along doors and connect access Security alarm installation 16-core wire Primary electronics 12V DC control systems and alarm systems. The Inductio line was developed to provide a path for the bidirectional transmission of data and energy necessary for consumers, e.g. the motorised lock, LED lighting system, in both directions at the same time. Alarm group 1 Open sensor Alarm group 2 Breach sensor Alarm group 3 Close sensor Alarm group 4 Tamper sensor Alarm group 5 Malfunction Monitoring resistors at soldering points from electronic block Malfunction output System malfunction Relay 1, e.g. interlock control Ö M S Relay 2, e.g. catch control Ö M S WITHOUT ANY ANNOYING CABLE TRANSITIONS BETWEEN DOOR LEAVES AND FRAMES Power supply 12V DC /24V DC Fixed connection in electronic block Frame and leaf electronics are concealed in the door frame and leaf. The dimensions of the PVC housing for connecting the components match the dimensions of the lock recess that is used by door manufacturers for installing a mortise lock. THE SMARTEST DOOR HINGE BY FAR! 6. 1. 7. 2. SECURITY COMPONENTS AT THE DOOR 3. 4. 1. MAGNETIC CONTACT Automatic alarm for monitoring doors and windows 3. MOTORISED LOCK Prevents unauthorised persons from gaining entry into a house, since the door is always locked 9. 8. 5. 2. LOCKING ELEMENT Prevents access to armed area of security alarm system 4. INTERLOCK SWITCH CONTACT Allows the security alarm system to determine whether the door is locked or not
AN INDUCTIO SYSTEM REPLACES SEVERAL WIRE TRANSITIONS Secondary electronics Close sensor 4 free terminals Magnetic contact Magnet Alarm system (or wired glass) or glass breakage sensor 12V DC line voltage Interlock switch or strike plate contact or lock feedback External sabotage contact Key product features Energy and signals are transmitted through electrically isolated and maintenance-free conducting components An energy and signal conducting element without any load-bearing function that is distinguished by the roll look of a three-piece door hinge made of extruded aluminium for steel and aluminium frame doors equipped with an electronic security system Visually appealing Hahn Türband 4, three-piece Path for bidirectional transmission intended for connecting a central security system with consumers and alarms installed at doors Ö M S Ö M Terminal screws or soldering tags 12V DC /24V DC S Relay 1 Relay 2 External malfunction input (EN) for actuating motorised lock, etc. Stabilized voltage output 12V DC /20 ma, short-circuit proof for e.g. vibration alarm Power supply of consumers Cyclical self test Operating voltage monitoring Bearing point, maintenance-free Easy to install and disassemble door leaves, since there are no fixed cable connections to be loosened and re-installed AESTHETIC FOR ARCHITECTS. CONVENIENT FOR INSTALLERS. ECONOMICAL FOR BUILDING OWNERS. 5. LED STRIPES Not related to security 7. ACTIVE GLASS BREAK SENSOR Ultrasound transmitter with receivers, responds to damage or when pressure is applied 9. ALARM SYSTEM WIRED GLASS In case of broken glass, the leads of the alarm system are interrupted 6. PASSIVE GLASS BREAK SENSOR Responds to glass break vibrations of approx. 100 khz 8. VIBRATION ALARM Collects acoustic events in frequency ranges and evaluates these using a CPU
ELEGANT AND FREE OF WEAR The Hahn Türband 4 Inductio is a new, technically impressive solution that makes it incredibly simple for builders and door installers when it comes to connecting security-related components. The product successfully completed more than 10 million opening and closing cycles with a frequency of 1 Hz without a failure occurring. Even building owners gain decisive advantages stemming from the use of the Hahn Türband 4 Inductio : The door can be easily removed for renovations and re-installed again afterwards. It is no longer necessary for certified installers to connect electrical lines for VdS-approved installations. Besides the longevity of the Hahn Türband 4 Inductio, this also represents a clear economic advantage that ensures a fast return on investments in modern technology.
THE PERFECT SOLUTION FOR EVERY SITUATION Enthusiasm for excellent design, perfect technology and exceptional service has made Dr. Hahn one of the leading companies when it comes to development and production of hinges for metal and PVC-U doors. Since 1961, Dr. Hahn and its staff, which has grown to 400 employees in the meantime, create and manufacture door hinges with great attention to detail. Almost every installation situation involving metal and PVC-U doors can nowadays be solved by using a Dr. Hahn hinge always with the objective of ensuring a smooth process through to final installation of the door thanks to easy handling. With Inductio Dr. Hahn offers architects, planners, builders and door installers an internationally unique innovation for commercial doors equipped with electronic security systems and for high-quality residential doors. Hinges. Made in Germany.
INDUCTIO IS SYSTEM-FREE AND MAY BE USED WITH ALL APPROVED SECURITY ALARM SYSTEMS/INSTALLATIONS Specifications Operating voltage 12 V DC / 24 V DC Operating voltage range 9.6 V DC bis 28.8 V DC Closed-circuit current input 50 ma at 12 V DC 30 ma at 24 V DC Load capacity of feedback outputs 100 ma Contact rating of relay outputs 30 V DC 300 ma Protection against electromagnetic influences (EMC) 2014 / 30 / EU and as per VdS 2110 Environmental class as per VdS Türband 4 Inductio Class IV Electronic housing Class III Degree of protection Türband 4 Inductio IP65 Electronic housing IP54 Storage temperature range 0 to 50 C Operating temperature range 40 to + 70 C Relative air humidity max. 93 % (not condensing) Installation position vertical Electronic housing dimensions 290 (252) x 20 (17.8) x 38.6 mm Certified in accordance with VdS Class C and EN 50131 Grade 3 system-free Dr. Hahn GmbH & Co. KG Trompeterallee 162 170 D-41189 Mönchengladbach Postfach 40 01 09 D-41181 Mönchengladbach Phone + 49 (0) 2166 / 954-3 Fax + 49 (0) 2166 / 954-444 Internet: www.dr-hahn.com E-Mail: sales@dr-hahn.com Prsp. INDUCTIO / GB / D-PRO0168 / 11.17 Subject to technical changes.