Λευκωσία, 19 Απριλίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 19 Απριλίου 2018 ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: meropi@ccci.org.cy, Ιστοσελίδα:www.ccci.org.cy

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Register issued on : 2018-04-13 A list of subsectors can be found at the end of this document.

Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector A : SERVICES Register issued on : 2018-04-13

Subsector A10: SERVICES OF REAL ESTATE AGENTS Page 3 Subsector : A10 Registration Date : 2018-03-13 SN Norway ID : NOT18003/0001 Draft for public enquiry 91.010.30 NS 3600 Technical Surveyor's report on dwellings in preparation for sales This standard specifies minimum requirements for what a technical condition analysis of an individual dwelling should include to give the buyer and the seller correct information about the dwelling. The standard contains detailed lists of components to be inspected and criteria for classification of deviations from the reference condition. Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : 2018-03-09 TSE Turkey ID : t0122258/0001 03.080.30 Mehteran Team This standard covers the structure of the mehter teams and their costumes, equipment, repertoire, training, walking and concert arrangements and the equipment to be used in the tuğ. Subsector : A11 Registration Date : 2018-03-09 TSE Turkey ID : t1013181/0001 03.080.30, 11.180.10 Work places - Prosthetics - Orthotics manufacturing and fitting centers General rules This standard, includes, rules for management structural properties, technical equipment and personnel characteristics of Prosthetics - Orthotics manufacturing and fitting centers Subsector A13: EXPERTISE SERVICES

Page 4 Subsector : A13 Registration Date : 2018-03-19 SNV Draft Issue Date : 2018-03-15 Switzerland Latest Date for Comments : 2018-06-15 ID : CH180003/0001 Draft for public enquiry 07.060 prsia 106 Order for services and fees of geologists REV/AMD SIA 106:2007 ** End of Sector **

Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2018-04-13

Subsector B01: FIRE PROTECTION Page 6 Subsector : B01 Registration Date : 2018-03-16 SIS Draft Issue Date : 2018-03-16 Sweden Latest Date for Comments : 2018-04-16 ID : 00003656/0001 13.220 3656 Portable fire extinguishers Maintenance and recharging Thisstandardhasbeencompletelyrevised. Byportablefireextinguisher,thisstandardmeansextinguisherapprovedaccordingtoEN3. Provided that portable fire extinguishers are in working condition, they are an effective extinguishing tool. They are especially valuable in the early stages of the fire and can be used effectively by an untrained person. Portable fire extinguishers have a long service life, but it should be kept in mind that the functionality depends on the maintenance to ensure the immediate usefulness of the portable fire extinguishers. This Swedish standard specifies requirements for control and maintenance of portable fire extinguishers so that they can offerthesamefunctionaswhenmanufactured,deliveredandinstalled. This standard includes handheld extinguishers, regardless of location. Subsector : B01 Registration Date : 2018-03-27 AFNOR France ID : 00207579/0001 PR NF S61-213/CN Pillar fire hydrants - National addition to NF EN 14384:2006 Subsector : B01 Registration Date : 2018-03-27 AFNOR France ID : 00207581/0001 PR NF S 61-550 Firefighting and rescue service equipment - Special complementary provisions for hydraulic platforms (HPs) Subsector : B01 Registration Date : 2018-03-27 AFNOR France ID : 00207582/0001

Page 7 PR NF S61-211/CN Underground fire hydrants - National addition to NF EN 14339:2006 Subsector : B01 Registration Date : 2018-03-02 PKN Poland ID : 18001192/0001 13.220.50 prpn-b-02852 Fire protection in buildings -- Calculation of fire load and relative length of time of fire The standard describes the calculation method of the fire load in buildings and landfills of solid materials as well as calculation method of relative duration of fire Subsector : B01 Registration Date : 2018-03-02 PKN Poland ID : 18001193/0001 13.220.20 prpn-b-02877-4 Fire protection in buildings -- Natural smoke and heat axhaust systems -- Principles of design The standard concerns the principles of designing natural smoke and and heat exhaust ventilator. The standard specifies the rules for calculating the area of smoke vents and their arragement in the roofs of single-storey buildings and on the highest floors of multi-storey buildings. The standard does not apply to the design of powered smoke and heat exhaust systems. Subsector : B01 Registration Date : 2018-03-30 TSE Turkey ID : t7004156/0001 13.220.20 Fire safety measures in public places and buildings - Part 7: Industrial constructions This standard specify all kinds of products that are processed in the factory and processing and assembly, mixing, cleaning, washing, packaging, storage, distribution and repair works and raw materials and semi-finished products are processed into finished products; manufacturing plants, food processing plants, filling and discharging facilities, dry cleaning facilities, mining processing facilities, raffiners, etc., to be used in manufacturing plants,

Page 8 factories, workshops, printing houses, locations. Subsector B02: STRUCTURES Subsector : B02 Registration Date : 2018-03-09 UNMZ Draft Issue Date : 2017-12-10 Czech Republic Latest Date for Comments : 2018-01-30 ID : 65000417/0003 Bitumen and bituminous binders Modified bitumens Part 3: Special polymer modified bitumens This standard contains the requirements of the Czech Republic for modified asphalt binders usedinroadconstruction.thisstandardconsistsofthreeparts: Part1:Polymersmodifiedbitumens Part2:Crumbrubbermodifiedbitumens Part3:Specialpolymermodifiedbitumen ČSN657222-3specifiestypesofspecialpolymermodifiedbitumens.Aninternational standard has not yet been developed for this part, only the draft CEN / TC 336 / N 689 that has been taken into account. Subsector : B02 Registration Date : 2018-03-09 NBN Belgium ID : BE664056/0001 13.220.50, 91.010.30, 91.080.30 prnbn EN 1996-1-2 ANB:2018 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design - National annex REV/AMD NBN EN 1996-1-2 ANB:2012 European : Not Equivalent to EN 1996-1-2:2005 Subsector B03: CONCRETE Subsector : B03 (Secondary Subsector) TSE Turkey ID : t0122283/0001 Registration Date : 2018-03-30

Page 9 91.100.10, 91.100.15, 91.100.30 Tests for geometrical properties of aggregates Quality assessment of fine aggregate (sand) or very fine materials (passing 0,063 sieve) Rapid determination of the methylene blue value by using a colorimeter This standard provides a rapid test method to determine the amount of methylene blue adsorbed by a part of fine aggregate or mineral filler and can be used both in the laboratory and in the field. International : Modified ASTM C1777:2015 Subsector B08: DOORS AND WINDOWS Subsector : B08 Registration Date : 2018-03-27 AFNOR France ID : 00207752/0001 PR NF P23-309 Wood-aluminum composite joinery Technical specifications of windows, door height windows, external doors and screens Subsector : B08 Registration Date : 2018-03-19 DIN Germany ID : 00518206/0001 00518206 Interior doors made from wood and wood-based panels - Part 1: Door leaves; Concepts, sizes, requirements Subsector : B08 Registration Date : 2018-03-19 DIN Germany ID : 00518207/0001 00518207 Interior doors made from wood and wood-based panels - Part 2: Door crozes; Concepts, sizes, installation

Page 10 Subsector : B08 Registration Date : 2018-03-28 UNI Italy ID : 01604338/0001 03.180, 91.060.50 UNI1604338 Installation of doors and windows Part 3: Requirements for provide courses of nonformal education and training to specialist in installation of doors and windows This standard defines minimal requirements for providing a non-formal training course about installation of doors and windows according to UNI ISO 29990. This standard applies to training activity for specialist in installation of doors and windows according to UNI 11673-2, Clause 1. Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : 2018-03-22 EVS Estonia ID : 00098872/0001 27.220, 91.120.10 prevs 860-7 Thermal insulation of technical equipment - Part 7: Insulation of pipes, vessels and equipment - Covering materials and support structure This standard is a part of Thermal insulation of technical equipment series, which has been composed to engineers, contractors and customers. This standard presents the most common covering materials and support structures for insulation works, as well as their markings and technical properties. Subsector : B09 Registration Date : 2018-03-15 UNE Spain Latest Date for Comments : 2018-04-24 ID : P0049810/0001 Draft for public enquiry PNE 92325 Thermal insulation products and glass enclosures for buildings. Installation control. This standard collects the steps to follow for the control of the insulation, and is organized into:project,installationworkandfinishedwork. This standard aims to provide procedures for project control, installation work and finished work that serve to assist the compliance of the CTE DB-HE1. These procedures can be used by prescribers or designers, control entities, insulation installers, and those responsible for buildingconstruction.

Page 11 This standard includes in its annexes a few checklists intended to help verify and check that insulationhasbeeninstalledcorrectlyinconstruction. Annex M contains a list of verification for the control of the installation of windows and glass enclosures. Note: the technical Committee CTN 85 has published the standard UNE 85219, "Windows. Installationonsite",whichincludesspecificinformationfortheinstallationofwindows. REV/AMD UNE 92325:2016 Subsector B12: MASONRY Subsector : B12 Registration Date : 2018-03-19 DIN Germany ID : 00518250/0001 00518250 Testing of mortars containing mineral binders - Hardened mortars - Part 4: Determination of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test Subsector : B12 Registration Date : 2018-03-19 DIN Germany ID : 00518251/0001 00518251 Testing of mortars with mineral binders - Fresh mortars - Part 7: Determination of the water retention value by the filter plate method Subsector : B12 Registration Date : 2018-03-19 DIN Germany ID : 00518252/0001 00518252 Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination of the mortar compressive strength in the bed joint

Page 12 Subsector : B12 (Secondary Subsector) TSE Turkey ID : t0122283/0001 91.100.10, 91.100.15, 91.100.30 Registration Date : 2018-03-30 Tests for geometrical properties of aggregates Quality assessment of fine aggregate (sand) or very fine materials (passing 0,063 sieve) Rapid determination of the methylene blue value by using a colorimeter This standard provides a rapid test method to determine the amount of methylene blue adsorbed by a part of fine aggregate or mineral filler and can be used both in the laboratory and in the field. International : Modified ASTM C1777:2015 Subsector B15: SANITARY APPLIANCES Subsector : B15 Registration Date : 2018-03-27 AFNOR France ID : 00207652/0001 PR NF D12-101 Sanitary appliances - Sanitary ceramic WC pans Subsector : B15 Registration Date : 2018-03-19 DIN Germany ID : 00300674/0001 00300674 Proportional Flow Controller for use in drinking water installations - Requirements and tests Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2018-03-19 DIN Germany ID : 11904287/0001 11904287 Plans for Public Utilities, Water Resources and Long-distance Lines - Teil 4: Drain and sewer systems outside buildings Page 13 Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : 2018-03-02 EVS Estonia ID : 00098703/0001 93.080.20 prevs 901-3 Road construction. Part 3: Bituminous mixtures This is national implementation standard for bituminous mixtures standard series EN 13108 (EN 13108-1:2016, EN 13108-2:2016, EN 13108-3:2016, EN 13108-4:2016, EN 13108-5:2016, EN 13108-6:2016, EN 13108-7:2016, EN 13108-8:2016, EN 13108-20:2016 and EN 13108-21:2016). This standard gives characteristics and requirement levels of aggregates for bituminous mixtures and defines national requirements which supplement the European standard and which are not in conflict with the requirements in the European standard. The national standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in Estonia. Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : 2018-03-19 DIN Germany ID : 00518253/0001 00518253 Waterproofing of elements in contact with soil - Part 1: Requirements and principles for design and execution; Amendment A1 Subsector : B27 Registration Date : 2018-03-19

DIN Germany ID : 00518254/0001 00518254 Waterproofing of elements in contact with soil - Part 3: Waterproofing with liquid-applied waterproofing materials Page 14 Subsector : B27 Registration Date : 2018-03-19 DIN Germany ID : 00518255/0001 00518255 Waterproofing of concrete areas trafficable by vehicles - Part 3: Waterproofing comprising two layers of polymerized bitumen sheeting; Amendment A1 Subsector : B27 Registration Date : 2018-03-19 DIN Germany ID : 00518267/0001 00518267 Waterproofing of concrete areas trafficable by vehicles - Part 5: Waterproofing comprising a layer of polymerized bitumen sheet in conjunction with a single synthetic or elastomer sheeting; Amendment A1 Subsector : B27 Registration Date : 2018-03-30 TSE Turkey ID : tst00113/0002 75.140 Roofing - Bitumen emulsions used as a protective coating -Specifications This standard covers bitumen emulsions suitable for use as protective coating on terrace roofs and other open surfaces with a slope of less than 4% or less than 42 mm / m International : Modified ASTM D 1227-95:1995

Subsector B29: AGGREGATES Page 15 Subsector : B29 Registration Date : 2018-03-30 TSE Turkey ID : t0122283/0001 91.100.10, 91.100.15, 91.100.30 Tests for geometrical properties of aggregates Quality assessment of fine aggregate (sand) or very fine materials (passing 0,063 sieve) Rapid determination of the methylene blue value by using a colorimeter This standard provides a rapid test method to determine the amount of methylene blue adsorbed by a part of fine aggregate or mineral filler and can be used both in the laboratory and in the field. International : Modified ASTM C1777:2015 Subsector B30: FLOOR AND SURFACING Subsector : B30 Registration Date : 2018-03-19 DIN Germany ID : 00518269/0001 00518269 Sports grounds - Part 5: Tamped areas Subsector : B30 Registration Date : 2018-03-28 UNI Italy ID : 01604340/0001 71.100.50, 79.020 UNI1604340 Wood finishes - Surface finishes for wood doors and windows - Part 2: Minimum requirements for degradation resistance of wood substrates and painting cycles for external doors and windows made of wood and other materials Thestandarddefines: - characteristics of raw materials and finished products affecting the degradation of wood substrates and painting cycles for doors and windows made of mixed materials, for example wood-aluminum,wood-plasticorwood-iron,tobeusedinexternalenvironments; - methods for the determination and/or evaluation of the characteristics in accordance with normativereferences,ifany; -minimumrequirementsrelatedtoeachcharacteristic. The standard does not apply to doors and windows entirely made of wood.

Page 16 Subsector : B30 Registration Date : 2018-03-15 UNE Spain Latest Date for Comments : 2018-04-24 ID : P0049189/0001 Draft for public enquiry PNE 147301 Sport surfaces of artificial turf for the practice of paddle. Requirements The objective of this standard is to serve as a reference document for the construction, inspection and maintenance of surfaces of artificial grass destined to the practice of the paddle. This Spanish standard includes laboratory tests, in situ tests and product identification tests for this type of sports surface, so as to ensure that the sports performance properties evaluated on the product in the laboratory are reproducible at the facility and identified with the data sheets declared by the manufacturers of the material.de in the construction of football, rugby and golf sports surfaces of natural grass outdoor with a regular use. Subsector B99: UNDETERMINED Subsector : B99 Registration Date : 2018-03-19 DIN Germany ID : 00518185/0001 00518185 Construction of schools - Constructional requirements for accident prevention Subsector : B99 Registration Date : 2018-03-19 DIN Germany ID : 00518223/0001 00518223 Playgrounds and outdoor play areas - Requirements on planning, building and operation Subsector : B99 Registration Date : 2018-03-19 DIN

Page 17 Germany ID : 00518256/0001 00518256 Waterproofing for indoor applications - Part 5: Waterproofing with waterproofing materials in sheet form in conjunction with tiles; Amendment A1 ** End of Sector **

Information procedure Page 18 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2018-04-13

Subsector C01: Food products Page 19 Subsector : C01 Registration Date : 2018-03-28 UNI Italy ID : 01604278/0001 67.100.10 UNI1604278 Method for the determination of rind content in grated long ripened hard cheese produced with raw bovine milk This standard describes the method for measuring the content of rind in grated cheese, using capillary electrophoresis (CZE). This standard is applicable to grated hard cheese, producedwithrawmilk and ripened more than 9 months. The determination is based on the ratio between alfa s2 casein and the peptide (f 88-199) of alfa-s1 casein that, during ripening, undergo a different rate of accumulation in rind and in cheese. Subsector : C01 Registration Date : 2018-03-28 UNI Italy ID : 01604279/0001 67.100.10 UNI1604279 Extraction method for the analysis of lactose, glucose and galactose in soft, fresh and blue cheeses This technical specification describes the extraction procedure for analyzing the content of lactose, glucose and galactose in fresh, soft and blue cheeses. This technical specification widens the application field of UNI/TS 11687 that was restricted to hard and long ripened cheese. Similarly to UNI/TS 11687, it is applicable to cheese in which both the reduction of lactose and the further metabolization of glucose and galactose, naturally occurred during the technological process by the action of microflora. It is not applicable to dairy products in which the lactose hydrolysis has been obtained by the addition of the beta- galactosidase enzyme, and consequently contain high concentration of glucose and galactose. The method has been validated by only one laboratory. Subsector : C01 Registration Date : 2018-03-09 TSE Turkey ID : t2001535/0001 67.160.20 Orange juice This standard covers orange juice

Page 20 Subsector : C01 Registration Date : 2018-03-30 TSE Turkey ID : tst12399/0002 67.080.20 Canned vegetables- Garniture This standard covers canned vegetables (garniture) Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : 2018-03-27 AFNOR France ID : 00207649/0001 PR NF T34-560 Paints and varnishes - XXXXXXXXX Subsector C03: CHEMISTRY Subsector : C03 Registration Date : 2018-03-15 UNE Spain Latest Date for Comments : 2018-04-24 ID : P0047748/0001 Draft for public enquiry PNE 84092 Cosmetic raw materials. Polyethylenglycol-20 stearate This standard defines the physico-chemical characteristics of polyethylenglycol-20 stearate for use in cosmetics REV/AMD UNE 84092:1997 Subsector C20: EXPLOSIVES AND FIREWORKS Subsector : C20 Registration Date : 2018-03-09 TSE Turkey

Page 21 ID : t0112741/0001 71.100.30, 95.020 Non-technical Survey This standard establishes principles and provides guidance on the conduct of non-technical survey and details responsibilities and obligations of the organisations involved. Subsector : C20 Registration Date : 2018-03-09 TSE Turkey ID : t0112742/0001 71.100.30, 95.020 Clearance requirements based on requirements of IMAS 09 10 and IMAS 09 11 This standard defines 'clearance' as part of the land release process and specifies the quality system (i.e. the organisation, procedures and responsibilities) necessary to determine that land has been cleared by the demining organisation in accordance with its contractual obligations. IMAS 09.11 provides guidance for Battle Area Clearance. IATG 11.30 ASA Explosions EOD Clearance provides guidance on clearance of the area around an ammunition storage site after an undesired explosion. Subsector : C20 Registration Date : 2018-03-09 TSE Turkey ID : t0112744/0001 71.100.30, 95.020 Information management, including data collection and reporting based on requirements of IMAS 05.10 and reporting format available in IMSMA. This standard establishes general principles and provides guidance for effective information management in mine action programmes. Subsector : C20 Registration Date : 2018-03-09 TSE Turkey ID : t0121730/0001 71.100.30, 95.020 Mine action - Mine and ERW Risk Education

Page 22 This IMAS establishes principles and provides guidance for the effective assessment, planning, implementation, management, monitoring and evaluation of MRE. This IMAS updates and replaces all previous IMAS on MRE, specifically 07.11, 07.31, 07.41, 08.50, 12.10, 12.20, and 14.20. This document is intended to serve as a basic framework for MRE globally. Further detail on implementing the IMAS may be found in the guidebooks and modules referred to in the section below on resources (Annex A). This IMAS should be read in conjunction with other IMAS and guides. In particular, attention is drawn to IMAS 01.10, which defines the role of the IMAS, and establishes the guiding principles for their proper use. ** End of Sector **

Information procedure Page 23 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2018-04-13

Subsector F07: DOCUMENTATION AND INFORMATION Page 24 Subsector : F07 Registration Date : 2018-03-27 AFNOR France ID : 00207577/0001 XP X30-123 Guide on energy audits for transport activities Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : 2018-03-27 AFNOR France ID : 00207640/0001 PR X 50-144-2 Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 2: Guidelines for the environmental project tailoring Subsector : F20 Registration Date : 2018-03-27 AFNOR France ID : 00207641/0001 PR X 50-144-5 Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 5: Safety factor Subsector : F20 Registration Date : 2018-03-27 AFNOR France ID : 00207642/0001 PR X 50-144-1 Demonstration of Resistance to Environmental conditions - Design and carrying out of Environmental Tests - Part 1: Basis of the General Environmental Management Plan

Page 25 ** End of Sector **

Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on : 2018-04-13

Subsector H04: SPORTS EQUIPMENT Page 27 Subsector : H04 Registration Date : 2018-03-19 DIN Germany ID : 11201203/0001 97.220.99 DIN 32935 Home sports Equipment - Non-stationary tension and pression training equipment - Safety requirements and test methods Subsector H09: FURNITURE Subsector : H09 Registration Date : 2018-03-28 UNI Italy ID : 01604339/0001 71.100.50, 97.140 UNI1604339 Wood finishes - Determination of surface tendency to retain dirt The standard specifies a test method for evaluating the surface tendency to retain dirt. The method is suitable both to compare different finishing systems, and as a control test to ensure that a certain level of performance is maintained or achieved. REV/AMD UNI 9300:2015 Subsector H26: SEALING MATERIALS Subsector : H26 Registration Date : 2018-03-19 DIN Germany ID : 03200725/0001 23.060.40 DIN 30652-1 Excess flow valves - Part 1: Excess flow valves for gas installation Subsector H31: DEDICATED LPG APPLIANCES Subsector : H31 Registration Date : 2018-03-27 AFNOR France

Page 28 ID : 00207750/0001 PR NF D35-360/A1 LPG fired itinerant professional cooking facilities intended for food applications Subsector H99: UNDETERMINED Subsector : H99 Registration Date : 2018-03-21 ASI Austria ID : 00027374/0001 ÖNORM H 2201 Services of sanitary, heating, ventilation and cooling technics - Contract to provide services This Austrian Standard specifies methods and contractual provisions for the services of sanitary, heating, ventilations and cooling technics. It shall be used for works and services inside and outside of building structures from the transfer point of commissioning of the relevant supply or disposal networks. ** End of Sector **

Information procedure Page 29 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector I : MECHANICAL ENGINEERING Register issued on : 2018-04-13

Subsector I09: SMALL TOOLS Page 30 Subsector : I09 (Secondary Subsector) Registration Date : 2018-03-09 TSE Turkey ID : tst06061/0001 17.040.30, 23.040.40 Workshop gauges and reference gauges for plain parts; tolerances and admissible wear This standard covers tolerances and admissible wear of workshop gauges and reference gauges for plain parts. European : Not Equivalent to DIN 7163:2017 Subsector I20: REFRIGERATION Subsector : I20 Registration Date : 2018-03-08 NEN Netherlands ID : 50002064/0001 27.200 NPR 7600:2018 Concept nl Application of hydrocarbon as refrigerant in refrigerating systems and heat pumps NPR 7600 concerns the application of hydrocarbon as refrigerant in refrigerating systems and heat pumps, including the safety aspects. Subsector I30: AIR DISTRIBUTION Subsector : I30 Registration Date : 2018-03-19 DIN Germany ID : 04111960/0001 04111960 Ventilation and air conditioning - Part 4: Ventilation in buildings and rooms of health care - Supplement 1: Checklist for planning, execution and operation of components Subsector I36: THERMOPROCESSING TECHNOLOGY Subsector : I36 (Secondary Registration Date : 2018-03-08

Subsector) NEN Netherlands ID : 50002064/0001 27.200 NPR 7600:2018 Concept nl Application of hydrocarbon as refrigerant in refrigerating systems and heat pumps NPR 7600 concerns the application of hydrocarbon as refrigerant in refrigerating systems and heat pumps, including the safety aspects. Page 31 ** End of Sector **

Information procedure Page 32 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector M : METALLIC MATERIALS Register issued on : 2018-04-13

Subsector M01: STEEL Page 33 Subsector : M01 Registration Date : 2018-03-27 AFNOR France ID : 00207638/0001 PR NF A 35-015 Reinforcing steel - Weldable smooth steel - Bars and coils Subsector : M01 Registration Date : 2018-03-27 AFNOR France ID : 00207639/0001 PR NF A 35-080-1 Reinforcing steel - Weldable steel - Part 1: Bars and coils Subsector : M01 Registration Date : 2018-03-27 AFNOR France ID : 00207740/0001 PR NF A 36-711 Non packaging steel - Stainless steel intended for use in contact with foodstuffs, products and beverages for human and animal consumption Subsector : M01 Registration Date : 2018-03-09 TSE Turkey ID : tst06061/0001 17.040.30, 23.040.40 Workshop gauges and reference gauges for plain parts; tolerances and admissible wear This standard covers tolerances and admissible wear of workshop gauges and reference gauges for plain parts. European : Not Equivalent to DIN 7163:2017

** End of Sector ** Page 34

Information procedure Page 35 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector N : NON-METALLIC MATERIALS Register issued on : 2018-04-13

Subsector N03: PETROLEUM PRODUCTS Page 36 Subsector : N03 Registration Date : 2018-03-19 DIN Germany ID : 06235346/0001 06235346 Testing of lubricants - Test for fuel diluent in used automotive engine oils - Gas chromatography method Subsector : N03 Registration Date : 2018-03-09 NBN Belgium ID : BE664057/0001 75.160.20 prnbn T 52-707:2018 Petroleum products - Lamp oil - Specifications REV/AMD NBN T 52-707:2015 Subsector : N03 Registration Date : 2018-03-09 TSE Turkey ID : t1013472/0001 75.100 Lubricating oils, industrial oils and related products (Class L) - Group Y: Miscellaneous - Chain saw oils This standard specifies requiremenets and test methods for chain saw oils. Subsector : N03 Registration Date : 2018-03-30 TSE Turkey ID : tst07836/0001 23.040.01, 75.200 Determination of remaining strength of partial corroded line pipe This standard is intended solely for the purpose of providing guidance in the evaluation of metal loss due to corrosion in pressurized steel pipelines and piping systems used for petrol and petroleum produdcts., and natural gas.

Page 37 Subsector N05: TEXTILES Subsector : N05 Registration Date : 2018-03-15 UNE Spain Latest Date for Comments : 2018-04-24 ID : P0049335/0001 Draft for public enquiry PNE 40608 Agrotextiles. Determination of the efficacy against the insects passage This standard establishes a method to evaluate the efficacy of the agrotextiles against the passage of the different insect species. The efficacy determined in this standard is the percentageofexclusionmeasuredinlaboratoryconditions. This standard is applied to the textiles aimed to the crops protection against insects in the agriculture. Subsector : N05 Registration Date : 2018-03-30 TSE Turkey ID : t0122308/0001 97.160 Textiles - Bedding sets for babies This standard specifies the description, classification and characteristics, sampling, inspection and marketing of bedding sets for babies Subsector N09: PLASTICS Subsector : N09 Registration Date : 2018-03-27 AFNOR France ID : 00207586/0001 PR NF T54-981 Plastics Plastic dispatching films for the manufacturing of covers intended to be used in automatic processing in mail network Specifications for manufacturing and recommendations for use

** End of Sector ** Page 38

Information procedure Page 39 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on : 2018-04-13

Subsector S01: ACOUSTICS AND SOUND INSULATION Page 40 Subsector : S01 Registration Date : 2018-03-19 DIN Germany ID : 00101022/0001 17.140.30 DIN 45689-1 Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation method Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT Subsector : S04 Registration Date : 2018-03-27 AFNOR France ID : 00207651/0001 S74-303 Test procedure for damping perforating and not perforating shocks applied to thorax, arm, forearm, leg, thigh protective equipment Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : 2018-03-27 AFNOR France ID : 00207400/0001 PR XP T90721 Water quality Subsector : S09 Registration Date : 2018-03-19 DIN Germany ID : 11904285/0001 11904285 Drinking water supply from small units and non stationary plants - Part 1: Small units -

Guidelines for drinking water, planning, construction, operation and maintenance of plants Page 41 Subsector : S09 Registration Date : 2018-03-19 DIN Germany ID : 11904286/0001 11904286 Drinking water supply from small units and non stationary plants - Part 1: Small units - Guidelines for drinking water, planning, construction, operation and maintenance of plants; Supplement 1: Example for a checklist for the control of water catchment plants Subsector : S09 Registration Date : 2018-03-19 DIN Germany ID : 11904288/0001 11904288 UV devices for water treatment - Part 3: Reference radiometers for low pressure UV devices Subsector S16: AIDS FOR THE DISABLED Subsector : S16 Registration Date : 2018-03-30 TSE Turkey ID : t2013720/0001 11.180.01 Assistive products for blind and vision impaired persons - Product properties for tactile walking surfaces This standard provides product specifications and certification for polymer tactile walking surface indicators used to assist in the safe and independent mobility of blind or vision impaired persons.

Subsector S99: UNDETERMINED Page 42 Subsector : S99 Registration Date : 2018-03-19 DIN Germany ID : 06301853/0001 11.040.25 DIN 13097-4 Hypodermic needles - Part 4: Point geometry, requirements and testing ** End of Sector **

Information procedure Page 43 Monthly Notifications Register Notifications registered at CCMC from 2018-03-01 to 2018-03-31 Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on : 2018-04-13

Subsector T02: AEROSPACE Page 44 Subsector : T02 Registration Date : 2018-03-27 AFNOR France ID : 00207467/0001 NF L09-751 Aerospace series Designation of standard items Parts numbers writting Subsector : T02 Registration Date : 2018-03-27 AFNOR France ID : 00207468/0001 PR NF L09-004 Aerospace series Helicopters components part numbers Subsector : T02 Registration Date : 2018-03-27 AFNOR France ID : 00207469/0001 PR NF L09-003 Aerospace series Aircrafts and gliders components part numbers Subsector : T02 Registration Date : 2018-03-27 AFNOR France ID : 00207470/0001 PR NF L09-002 Aerospace series Aerospace components part numbers Major and minor modifications identification Subsector : T02 Registration Date : 2018-03-27

AFNOR France ID : 00207471/0001 NF L09-001 Aerospace series Identification of Aerospace components Parts numbers writting Page 45 Subsector T16: LIFTS & ESCALATORS Subsector : T16 Registration Date : 2018-03-05 UNMZ Czech Republic ID : 27000318/0001 Safety rules for lifts - Operation and service of lifts Subsector : T16 Registration Date : 2018-03-05 UNMZ Czech Republic ID : 27000418/0001 Safety rules for lifts - Operation and service of lifts Subsector : T16 Registration Date : 2018-03-05 UNMZ Czech Republic ID : 27000518/0001 Safety rules for lifts - Testing and inspections of lifts in operation Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2018-03-21 LVS Draft Issue Date : 2018-03-22 Latvia Latest Date for Comments : 2018-04-23 ID : 00058774/0001 Draft for public enquiry 93.080.30 LVS 85:2016/prLVS Road marking The standard specifies shape, colour, size, technical requirements and installation rules of road marking. REV/AMD LVS 85 Page 46 ** End of Sector **

List of non-electrotechnical subsectors 2011-06 Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete 71 104; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures 165 124 B11 Metal structures 167 135 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134 B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 401 C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C22 Bio-Based products / 411 C99 Undetermined / 386

Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74 I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics 61 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS ;377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150; 324 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2018 Issued on : 13 April 2018

Page 1 Information Procedure on Standards Notifications registered at CCMC during March 2018 Sector U : GENERAL ELECTROTECHNICAL STANDARDS Register issued on : 13 April 2018

Subsector U04: ELECTRICAL FLUIDS Page 2 Subsector : U04 Registration Date : 2018-03-19 DIN Germany ID : 06235347/0001 06235347 Testing of lubricants - Determination of low boiling components in used engine oils - Gas chromatography Subsector : U04 Registration Date : 2018-03-19 DIN Germany ID : 06235347/0001 06235347 Testing of lubricants - Determination of low boiling components in used engine oils - Gas chromatography ** End of Sector **

Page 3 Information Procedure on Standards Notifications registered at CCMC during March 2018 Sector V : ELECTRONIC ENGINEERING Register issued on : 13 April 2018

Subsector V17: ELECTRONIC MEASURING EQUIPMENT Page 4 Subsector : V17 Registration Date : 2018-03-19 DIN Germany ID : 02228092/0001 02228092 Determination of the breath alcohol concentration - Part 4: Requirements for facilities to test evidential breath analyzers by using calibration gas Subsector V99: UNDETERMINED Subsector : V99 Registration Date : 2018-03-19 DIN Germany ID : 02228064/0001 02228064 Road Traffic Signal Systems - Part 300: Technical Requirements for Signal Heads with LED ** End of Sector **

Page 5 Information Procedure on Standards Notifications registered at CCMC during March 2018 Sector W : ELECTRICAL ENGINEERING Register issued on : 13 April 2018

Subsector W03: ELECTRIC TRACTION EQUIPMENT Page 6 Subsector : W03 Registration Date : 2018-03-19 DIN Germany ID : 02228111/0001 02228111 State of the railway vehicles - Control and instrumentation technology - Part 207-12: External visible and audible warning devices for trains Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS Subsector : W27 Registration Date : 2018-03-19 DIN Germany ID : 02228115/0001 02228115 Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets (Amendment 3) (IEC 64/2253/CD:2017) Subsector : W27 Registration Date : 2018-03-19 DIN Germany ID : 02228120/0001 02228120 Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement (IEC 64/2255/CD:2017) Subsector W31: LIGHTNING PROTECTION Subsector : W31 Registration Date : 2018-03-09 TSE Turkey ID : t0122257/0001 91.120.40