High Efficiency Radiator Novelty in Heating Systems Designed by Suitable for low and high water temperature Suitable for public District Heating Systems Operating with constant water flow Quick acting on room heating High quality of heated air Easy and quick installation Engineering Germany Issued 1/ 2007 Update 1/ 2013 U
General Description The system Is comparable and not to compare with a standard radiator of heating systems. By simply adjusting the wing like a louver on the top of the termoplus radiator, the new type of heating terminal quickly assures a comfortable temperature in the entire room. This heating system is based on principle of natural convection and connections to the electrical power supply are not necessary. termoplus convectors are available in: * 8 sizes * 20 models * 4 version each model The Advantages Function termoplus is a new developed high-tech product and the result of a long term experience in production of thermal exchangers. The function is a very efficient principle of natural convection. Increasing the temperature the air goes up causing a new flow of cold air from below in recycling. This process is called the chimney effect. Air Quality The convective air motion of termoplus guaranties a uniform and comfortable room temperature in a very short period of time, assuring an immediate sense of wellbeing. The air coming out of termoplus always has a temperature under 55 C. Result is a natural and pleasant heating while keeping a correct degree of humidity and temperature in the room. heating only where and when it is needed by a lower energy consumption. Safety Even at maximum performance, touching the termoplus never will injurious to health. The cabinet not exceeds 43 C. Adding this advantage to the rounded shape without corners makes termoplus especially safe for children. Healthiness Airflow leaving termoplus don t toast the air. Typically for traditional radiators are the soot smell and the soot stains on the wall; this becomes avoided using new termoplus radiators. This guarantees a healthy and breathable air, above all and for the children. Easy and quick installation termoplus radiators have a light weight and can be easily carried by one person. Also be installed easily and quickly on any kind of wall. termoplus is supplied with this clear installation instructions explaining exactly how the unit can be assembled and mounted also after the construction site works are finished. Only four inserts are enough to fix termoplus to the wall quickly. The hydraulic circuits and junctions are the same as for traditional heating systems. Energy Saving Different from traditional radiators termoplus only contains a small content of water inside. Therefore the room is heating immediately and it allows Settings The heating capacity can be easily adjusted controling the air flow with the wing on the top. termoplus radiators are also available with a fixed grid, manual adjustable wing and thermostatic controlled wing.
Comparison with conventional Radiators Comparison between termoplus and conventional radiators termoplus Conventional Radiator Radiator medium water water Price comparable comparable Quick Installation yes no Flexible Installation Quickly done Flexibility limited Dimensions comparable comparable Silent working yes yes Standard to use with low water temperature yes no Instantaneous heating yes no Security yes no 1 - termoplus 2 - floor heating System 3 - ground line 4 - geothermal Heat pump an ideal radiator for: Heat pumps New and innovating energy saving heating systems in buildings have already been realised in Europe. termoplus applications in geothermal heat pump circuits offer a significant energy saving and take care for the environment. The new invention Heat Exchange for radiators Condensing boilers High thermal capacities even at low warm water temperatures make it possible to have full advantages in combination with modern condensing boilers. The heat distribution in the rooms is much more homogeneous and also the heating comfort is much more higher compared to traditional radiators Heating with low energy consumption The termoplus radiators are developed to guarantee a fast and comfortable heating at low energy consumption for domestic applications in both in new or in existing buildings. The new termoplus versions TH 130, TH 230, TH 330 and TH 430 are specially constructed to guarantee high heating capacities also in heating circuits with a relatively low water temperature. A new finned heating coil has been developed for an average water temperature between 45 C and 50 C. termoplus make it possible to change the older boiler for a new modern and efficient one, without to change the existing hydraulic system. Changes in the wall construction are not necessary, only to change the old radiators against termoplus. termoplus is available with a unique patented automatic wing (system thermofone), which include an integrated thermostat which can be controlled and adjusted by the user. The thermostat in combination with an electrical motor automatically control the opening of the wing on the top of termoplus, activating or deactivating the warm air flow. The system is feed by a usual 9 Volt battery with the life time of app. 3 years. This result in a completely autonomous use of termoplus, without any connection to the electrical power supply.
Technical Data Heating time: Comparison between termoplus and conventional radiator Series TH Outlet temperature: in comparison between heated water circuit of termoplus and conventional radiator Model TH 110 TH 120 TH 210 TH 220 TH 310 TH 320 TH 410 TH 420 Heating capacity (Qo) EN 442 (1) kw 0,7 0,91 1,01 1,35 1,4 1,75 1,81 2,25 Water flow (2) kg/h 60 78 87 116 120 150 156 190 Water pressure drop kpa 0,18 0,22 0,24 0,5 0,35 0,95 0,52 1,31 Exponent n (3) 1,31 Water content l 0,4 0,5 0,5 0,8 0,6 1 0,7 1,1 Net weight kg 11,6 12,1 14,2 14,9 17,1 18 19,9 21 Model Heating capacity (Qo) EN 442 (1) Water flow (2) Water pressure drop Exponent n (3) Water content Net weight Heigh (H) (Series TH) kw kg/h kpa l kg mm TH 130 TH 230 TH 330 TH 430 1 87 0,26 0,6 12,5 1,54 135 0,72 1,1 15,6 1,28 675 2 176 1,36 1,4 18,7 2,515 221 1,91 1,6 21,9 Series TL Model TL 120 TL 130 TL 220 TL 230 TL 320 TL 330 TL 420 TL 430 Heating capacity (Qo) EN 442 (1) kw 0,86 0,92 1,27 1,35 1,67 1,78 2,08 2,21 Water flow (2) kg/h 74 78 109 115 144 152 179 189 Water pressure drop kpa 0,2 0,24 0,45 0,55 0,81 1,01 1,02 1,46 Exponent n (3) 1,39 1,28 1,39 1,28 1,39 1,28 1,39 1,28 Water content l 0,5 0,6 0,8 1,1 1 1,4 1,1 1,6 Net weight kg 11,6 12,1 14,2 14,9 17,1 18 19,9 21 Heigh (H) (series TL) mm 575 Length (common data) mm 600 800 1000 1200 Heat exchanger length (common data) mm 425 625 852 1025 Depth (common data) mm 140 Connection diameter (common data) inch ½" Maximum working temperature 90 C Maximum working pressure 8 bar (1) Conditions to EN 442 Entering water temperatur twi = 75 C Leaving water temperature twa = 65 C (Δtw = 10 C) (3) For different other conditions as Δto = 50 C Room air temperature ta = 20 C (Δto = 50 C) Example for TH 430 using following Data: (2) Water flow and presure drop data refer to UNI 442 test Δto = 50 C twi = 60 C twa = 50 C ta = 20 C Q = 2515 Watt n = 1,28 See Page 11-21
General Features General Description Cabinet (1) The rounded curves of the cabinet present an aesthetic design. Available in RAL 9002 colour, made from hot painted steel sheets and polyurethane powdered after treatment against rust and corrosion. Heat exchanger (2) Designed and studied in order to pay tribute to the natural convective thermal exchange. The coil is a copper pipe coil with aluminium fins mechanical fitted by expansion of the pipes. The coil can be reserved on site. Rear bearing frame (3) The frame is made from galvanized thick metal sheet to ensure protection against corrosion. The rear of the frame has holes for wall mounting and the appliance; pre-blanked holes on both sides is very flexible for the hydraulic installations. The pre-blanked holes in the upper side allow the substitution of existing radiators (TH - Version) with a distance from the water inlet pipe to the water outlet pipe from 480 to 630 mm. Water connections (4-5) The collectors are provided with female connections (½ ). If it s necessary to reverse the heat exchanger, it is possible to connect on the right or left side of the rear bearing frame. Air distribution head (6) made from high temperature-resistant PVC and available in 3 models: * with fixed steel metal grid * with manual adjustable louver * with automatic louver The model with automatic louver is equipped with an electric motor served by a common 9 Volts battery. The open and closing control is given by an onboard thermostat, manual adjustable. Air louver (7) The air louver is positioned at the top of the heat exchanger designed as a wing. Air conveyor (8) The air conveyors, on both sides, optimize the ascending airflow, maximizing the natural convective heat flow. Application termoplus is very easy to install and reversible water connections allow to choose a right or left installation. The removable cabinet ensures thorough cleaning, essential for installations or in those with special hygienic requirements. termoplus is in full compliance with the safety regulations. Packaging The units are packed in a standard card box for transport.
Installation termoplus convectors must be installed perfectly horizontal, the installation phases are following: 1. Fix the rear frame at the wall 2. Fix the heat exchanger and the convector to the rear frame; make the water connections. 3. Hook up the cabinet at the rear frame. Installing of the unit, proceed as following: 1.) Use the pre-printed template on the packaging - or the rear frame (installation to the wall) - in order to define the position of the hydraulic connections, respecting the minimal distance from the floor (100mm - suggested: 130mm) and the minimal distance from the top side of the rear frame in case of installation in niche (under window sill). Installation in new buildings Replacement of radiators in existing buildings In following picture are shown the different kind of installation and water inlet and water outlet TF - Size 1 TF - Size 2 TF - Size 3 TF - Size 1 TF - Size 2 TF - Size 3