BULGARIAN ACCREDITATION SERVICES ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005

Similar documents
Innovations in the Field of Noise and Vibrations by Spectri Ltd.

Annex of the Certificate (Page 1/4) Scope of Accreditation

Proforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986

Elite Safety Consultants. Your One Stop Safety Solution Provider Safety: It s a choice and not a chance. A glimpse at our Profile

GASTEC QA. Approval Requirements 31-2

GASTEC QA. Approval Requirements 31-1

Sound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class

10.6 Schedule of Accreditation

Annex of the Certificate (Page 1/7) Scope of Accreditation

Test procedure/ method identification IP 100 (ISO 9096, ČSN EN )


Valves for natural gas transportation in pipelines Performance requirements and tests

This document is a preview generated by EVS

CERTIFICATE of Product Conformity (QAL1 )

Title. Author(s)Yoshida, Fumikazu; Yoshida, Haruyo. Issue Date Doc URL. Type. File Information

DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)

Glenside Environmental Services Ltd

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

Glass fibre rovings - Non-metallic materials

ISO INTERNATIONAL STANDARD

GASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012

CZ-CPA code CSNEN CPNBÚ CSNEN ISO/IEC 17067:2014 scheme la, lb, 5 CP NBÚ CSNEN ISO/IEC 17067:2014 scheme 3 CPNBÚ

This document is a preview generated by EVS

INSPECTION REPORT Nr IDD/S-09/922

TSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017

CERTIFICATE of Product Conformity (QAL1 )

SCESm Directory Accreditation number: SCESm 0013

This document is a preview generated by EVS

GASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)

RENAR Accreditation Activities

SCESm Directory Accreditation number: SCESm 0013

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Government Gazette Staatskoerant

CONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE

ASME/ANSI Interpretations No. 6. Replies to Technical Inquiries July 1, 1987, Through April 30, 1988

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

Management Systems Certification Ltd

Declaration of Conformity

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

A Notification under Article 12 of Regulation (EU) No 1025/2012 1

INTERNATIONAL STANDARD

This document is a preview generated by EVS

Certificate: _01 / 22 March 2013

INTERNATIONAL STANDARD

DESIGN, OPERATION & MAINTENANCE MANUAL

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

Contents. EN :2012 (E) Issue 5 ( ) Page

Standardization Programme ( ) Building & Construction Standards Committee

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

GASTEC QA. Approval Requirements 69-1

INTERNATIONAL STANDARD

DECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES

University of Minnesota Nano Fabrication Center Standard Operating Procedure

Australian/New Zealand Standard

TABLE OF CONTENTS. 1.0 INTRODUCTION Scope References Test Specimen Description Summary 1

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

GASTEC QA. Approval Requirements 136

SELF PRESERVATION SOCIETY By Jim Creak

MINISTRY OF THE INTERIOR CHIEF-DIRECTORATE FIRE SAFETY AND CIVIL PROTECTION DISASTERS RESPONSE AND UNIFIED RESCUE SYSTEM

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.

safety requirements are to comply with this compulsory specification twelve (12) months after the publication of this notice.

SCESm Directory Accreditation number: SCESm 0047

WATER HEATERS.

COUNTRY REPORT Slovak Republic (Observer) 9 th meeting of representatives from CEFTA countries responsible for conformity assessment

Standardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart

WORK PACKAGE 4 DELIVERABLE D.T4.1.4

Certificate: _01 / 29 April 2014

BRAZED PLATE HEAT EXCHANGERS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015

Testing coated fabrics

INTERNATIONAL STANDARD

TECHNICAL APPROVAL. TA no.: AT/ Edition V/2015 Date of expiry: 25 November 2020 Page: 1 of 14

TEST REPORT Page 1 of 28. Uçar Oyuncak San.ve Tic.Ltd.Şti.

TECHNICAL REPORT IEC/TR Fibre optic communication system design guides Part 11: Multimode launch conditions. Edition 1.

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.

Certificate: _01 / 22 March 2013

SOUTH AFRICAN NATIONAL STANDARD

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017

Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania

INTERNATIONAL STANDARD

CEN System Delegated Decisions Dispatch 33:2016

This document is a preview generated by EVS

GENERAL FIRE SAFETY TERMS & DEFINITIONS

GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES

TRG 5-53 TRG 5-54 TRG 5-55 TRG 5-57

DECLARATION OF PERFORMANCE. No EN

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2017

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription:

BULGARIAN ACCREDITATION SERVICES CERTIFICATE FOR ACCREDITATION MULTITEST LTD Inspection Body of Type A Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 UIC: 813141496 SCOPE OF ACCREDITATION To carry out inspection of: Welded metallic joints of pressure equipment; Welded joints of piping, oil and oil product pipelines; Welded joints of gas pipelines and associated equipment of metallic transporting and distributing pipelines, and natural gas equipment, installations and appliances; Permanent joints of gas equipment and installations for liquefied petroleum gases; Metallic and reinforced concrete structures and related components, including components of heat and water supplying systems, gas equipment and installations, hoisting equipment, hoisting and transport facilities, pressure vessels and equipment: Type, size and location of imperfections RT; Type, size and location of imperfections, wall thickness UT; Type, size and location of surface and subsurface indications MT; Type, size and location of indications, surface breaking PT; Type, size and location of imperfections, deviations from geometric dimensions VT; Percentage of chemical elements by optical emission spectral analysis ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005 Order No. 1039/26.09.2011 is integral part of this accreditation certificate, total number of pages 6. BAS reg. No. 267 OKA Expiry date: 30.09.2015... Executive director: Eng. Elza Yaneva Sofia 26.09.2011

REPUBLIC OF BULGARIA Executive Agency Bulgarian Accreditation Services ORDER No. 1039 Sofia, 26.09.2011. By virtue of Article 10, Paragraph 1, Item 2, in connection with Article 20, Paragraph 6 of the Law of National Accreditation of Conformity Assessment Bodies and 4.3.7 of Accreditation Procedure BAS QR 2 in connection with open procedure reg. No. 289-ОК/15.11.10., assessment report No. 289-ОК- 8/В/31.03.2011., opinion of Accreditation Committee No. 289-ОК-12/В/22.06.2011., letter ref. Nos. 7996/08.09.2011. (our incoming ref. No. 289-ОК/20/П/09.09.2011.) and ref No. 8034/19.09.2011. (our incoming ref. No. 289-ОК/21/Е/19.09.2011.), report incoming No. 289-ОК/22/В/26.09.2011. To carry out inspection of: Field of inspection I ACCREDIT Inspection Body of Type A AT MULTITEST LTD Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 Type of inspection Scope of inspection to parameters Methods and procedures as: norm, standard, specification and/or internal procedure 1 2 3 4 New and/or in service objects/equipment /products Welded metallic joints of pressure equipment; Welded joints of piping, oil and oil product pipelines; Welded joints of gas pipelines and associated equipment of metallic transporting and distributing pipelines, and natural gas equipment, installations and appliances; Permanent joints of gas equipment and installations for liquefied petroleum gases; Metallic and reinforced concrete structures and related components, including components of heat and water supplying systems, gas equipment and installations, hoisting equipment, hoisting and transport facilities, pressure vessels and equipment Type, size and location of imperfections 1. Radiographic inspection WQP 504-01-03 ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.) - art. 19, art.21. ODSOOOPP (published in State Gazette, issue 104/26.11.2004.) - art. 7, art. 25, art.26 Gazette, issue 67, dated 02.08.2004.) - art. 6, art,9, art.127. ODSOGEILPG (published in State Gazette, issue 82/21.09.2004.) - art.105 BDS EN 286-1 BDS EN 286-2 BDS EN 286-3 BDS EN 286-4 BDS EN 448 BDS EN 489 BDS EN 10217-1 BDS EN 10217-5 BDS EN 10217-6 BDS EN 10217-7 BDS EN 13458-2 BDS EN 14197-2 BDS EN 444 BDS EN 1435 BDS EN ISO 10893-6 BDS EN 12681

Type, size and location of imperfections Wall thickness BDS EN 12517-1 BDS EN 12517-2 2. Ultrasonic inspection WQP 504-02-03 ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.) - art. 19, art.21 ODSOGEILPG (published in State Gazette, issue 82/21.09.2004.) - art. 105 ODSOOOPP (published in State Gazette, issue 104/26.11.2004.) - art.7, art.25, art. 26 Gazette, issue 67, dated 02.08.2004.) - art.6, art.9, art.127. BDS EN 10025-1 BDS EN 10207 BDS EN 10208-1 BDS EN 10208-2 BDS EN 10217-1 BDS EN 10217-2 BDS EN 10217-3 BDS EN 10217-4 BDS EN 10217-5 BDS EN 10217-6 BDS EN 10217-7 BDS EN 10222-1 BDS EN 10312 BDS EN 12952-2 BDS EN 583-1 BDS EN 583-3 BDS EN 583-4 BDS EN 583-5 BDS EN 10160 BDS EN 10228-3 BDS EN 10228-4 BDS EN 10307 BDS EN 10308 BDS EN 12680-1 BDS EN 12680-2 BDS EN 12680-3 BDS EN ISO 17640 BDS EN ISO 11666 BDS EN ISO 23279 3. Ultrasonic inspection WQP 504-02-03 ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.) - art. 19 ODSOOOPP (published in State Gazette, issue 104/26.11.2004.) - art. 7, art.25, art.26 ODSOGEILPG (published in State Gazette, issue 82/21.09.2004.) - art.105 BDS EN 10208-1 EA BAS Order No.1039/26.09.2011. Page 2/5

Type, size and location of surface and subsurface indications Type, size and location of surface breaking indications Type, size and location of imperfections, deviations from geometric dimensions BDS EN 14127 4. Magnetic particle inspection WQP 504-03-03 ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.) - art. 20, art.21. Gazette, issue 67, dated 02.08.2004.) - art.6, art.9, art.127 BDS EN 10222-1 BDS EN ISO 15620 BDS EN 1369 BDS EN ISO 9934-1 BDS EN 10228-1 BDS EN ISO 10893-5 BDS EN ISO 17638 BDS EN ISO 23278 5. Liquid penetrant inspection WQP 504-04-03 ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.) - art. 20, art.21. Gazette, issue 67, dated 02.08.2004.) - art.6, art.9, art.127 BDS EN 10222-1 BDS EN ISO 15620 BDS EN 571-1 BDS EN 1371-1 BDS EN 1371-2 BDS EN ISO 10228-2 BDS EN ISO 10893-4 BDS EN ISO 23277 6.Visual inspection WQP 504-05-03 ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.)- art.19, art.21 Gazette, issue 67, dated 02.08.2004.) - art.6, art.9, art.127. BDS EN 286-1 BDS EN 286-2 BDS EN 286-3 BDS EN 286-4 BDS EN 334 EA BAS Order No. 1039/26.09.2011. Page 3/5

Percentage of chemical elements С, Si, Mn, Р, S, Cr, Мо, Ni, Аl, Со, Сu, Nb, Ti, V in metals of Fe base and Percentage of chemical elements Zn, Pb, Sn, Mn, Fe, Ni, Si, Al in metals of Cu base I ORDER BDS EN ЕN 13445-5 BDS EN 13458-2 BDS EN 14197-2 BDS EN ISO 17637 BDS EN 13018 7. Spectral analysis by optical emission WQP 504-11-01 ODSOOOPP (published in State Gazette, issue 104/26.11.2004.) - Art. 25 Stahlschluessel 2010 BDS EN 10028-2 BDS EN 10028-3 BDS EN 10028-4 BDS EN 10028-5 BDS EN 10028-6 BDS EN 10207 BDS EN 10208-1 BDS EN 10208-2 BDS EN 10217-1 BDS EN 10217-2 BDS EN 10217-3 BDS EN 10217-4 BDS EN 10217-5 BDS EN 10217-7 BDS EN 10219-1 BDS EN 10225 BDS EN 10248-1 BDS EN 10269 BDS EN 12420 BDS EN 12451 BDS EN 12452 BDS EN 12952-2 BDS EN 13480-2 BDS EN 13674-3 That an Accreditation Certificate is issued with reg. No. 267 ОКА dated 26.09.2011., and validity to 30.09.2015., with this order as appendix being integral part of it. The Accreditation Certificate and its appendix shall be received by the General Manager of Multitest Ltd, Varna, the Head of the Inspection Body of Type A or other authorized person in the premises of EA BAS. This order shall be communicated to the legal entity/sole trader within 3 (three) days from its issue. Eng. ELZA YANEVA Executive Director of EA BAS EA BAS Order No.1039/26.09.2011. Page 4/5

1. ODSOPE (published in State Gazette, issue 64, dated 18.07.2008.) - Ordinance on the design, safe operation and technical surveillance of pressure equipment (published in State Gazette, issue 64, dated 18.07.2008.) 2. ODSOOOPP (published in State Gazette, issue 104/26.11.2004.) - Ordinance on the design and safe operation of oil and oil product pipelines (published in State Gazette, issue 104/26.11.2004.) 3. Gazette, issue 67, dated 02.08.2004.) - Ordinance on the design and safe operation of transporting and distributing gas pipelines, and natural gas equipment, installations and appliances (published in State Gazette, issue 67, dated 02.08.2004.) 4. ODSOGEILPG (published in State Gazette, issue 82/21.09.2004.) - Ordinance on the design, safe operation and technical surveillance of gas equipment and installations for liquefied petroleum gases (published in State Gazette, issue 82/21.09.2004.) 5. Technical Specofocation; EA BAS Order No. 1039/26.09.2011. Page 5/5