SHEPHERD Smart solutions to protect and manage what matters the most to you
Security Shepherd Gateway & Keypad, Repeater, PIR Detectors, PIR Camera, Magnet, Glass Break, Siren 1-10 Safety & Air Quality Smoke, Flood, Air Quality 11-16 Home Comfort & Energy Saving Smart Plug, Door Lock 17-20 Secure and easy Shepherd Cloud Platform and Smart APP 21-24 1 2 3 4
1. 01. SECURITY
Shepherd Gateway Keypad Repeater PIR Detectors PIR Camera Magnet Glass Break Siren Mini Gateway - IOT Series 2.
Shepherd Gateway Control Panel The Shepherd is an advanced gateway which uses Crow s two way radio communication with dedicated FW2 protocol for outstanding encrypted security and reliability of data transmission with all peripherals as well as with Crow Cloud. Crow s peripherals offers up to 10 years battery life. Operation in a harmonized 868 MHz & 916 Mhz bands Compliance with RE directive (RED):2014/53/EU and EN50131 European standard Grade 2 Two Way ISM Transmission of encrypted and long range communication Green Eco system with peripherals life time operation up to 10 years without battery replacement SUOTA Software Over for the Air for easy Remote configuration, upgrade and testing of wireless equipment Advanced diagnostic tools for optimal installation and configuration Smart and wide Portfolio for Security, Safety, Comfort, Green Eco system Energy Management and Big Data collection Long range of wireless communication Outstanding Crow Cloud and Smart Shepherd Apps 3.
Easy Shepherd The Shepherd Easy Installation and Configuration. The gateway and its peripherals are very easy to install and configure Via EASY SHEPHERD or via Shepherd APP. Learning a device is done by simply entering its serial number provided on a label or scanning the barcode and inserting a battery or tamper? The Shepherd gateway will instantly recognizes the device with its default settings and allow to change them as per the installation requirements and needs. Status and diagnostic such as communication quality, battery level, RSSI, s as well as updates, changes and upgrades can also be performed Via EASY SHEPHERD or via Shepherd APP. 4.
SH-KP 2 Way Wireless Icon Keypad SH-KP1 is a Two-way Wireless Keypad for the daily operation of the Shepherd gateway. This keypad provides the controls, notifications and indications the Shepherd gatway. Easy and user-friendly control of the security system Integrated panic function Ergonomic design for handheld use or wall mounting 5 years battery life SPECIFICATION Detection Method Data Protocol Modulation Type Frequency Band Identification Indications RFID Functions Communication Range Current Consumptions Battery Battery Life Operating Temperature Dimensions Weight (Inc. battery) Numerical Keypad & RFID Freewave2 Two Way Protocol GFSK 868-869MHz / 916-917MHZ Unique ID serial number 24 bit LED Icons Built-in proximity reader Arm, Disarm, Zone Bypass, Panic Alarm, Chime Local Programming mode (users/tags) 500 m in open space Average: 10μA Standby: 4μA Transmission ~28 ma 3 x Lithium batteries / Size CR123 Up to 5 years -10 C to +55 C 152mm x 87mm x 28mm 200 gr SH-RPT The SH-RPT 1 is an advanced Wireless Repeater for the Shepherd gateway it extends the communication range between the Shepherd and its perioherals It receives alarm, status and control messages from the wireless devices, and sends them to the control panel. Up to 50 different devices can be enrolled to the repeater Mains powered, with a 36-hour, rechargeable backup battery LED indications for power failure, activity, and installation performance diagnostics 5.
SH-PIR 2 Way Wireless PIR Detector The SH-PIR is fully supervised low current Two Way Wireless PIR detectors, including the advanced Freewave2 Two way protocol for secure and reliable system operation. Full communication administration (Supervision, Tamper, Low Batt.) as well as test transmission signals (Communication, Tamper, Alarm). Quad element Motion Detector ASIC based Coverage up to 12m Powered by 1 lithium battery CR123 Battery life more than 5 years Configurable over-the-air by the Base Station Tamper Switch: Front cover and back tamper SPECIFICATION Detection Method Data Protocol APS Automatic Power Saving Modulation Type Frequency Band Quad Element PIR Freewave2 Two Way Protocol Yes GFSK 868-869MHz / 916-917MHZ Identification Event Transmission LED Indications Range in open Tamper Switch Supervision Time Unique ID serial number 24 bit Alarm, Tamper, Supervision, Low Battery Green LED: PIR channel Red LED during alarm space 500 m Optimal installation height 1.8m to 2.4m Current Draw Transmit power Power Supply Battery Life Operating Temperature Dimensions Weight (Inc. battery) Front cover removal & Back tamper 7 min by default (programmable between 1 to 30 min) Standby ~7 A Receive mode ~29 ma Transmit mode ~38 ma ~ 14dBm Lithium 3V battery type CR123 / Size 2/3AA Up to 5 years -10 C to +50 C 108mm x 58mm x 42.5mm 120 gr 6.
SH-PIR-CRT 2 Way Wireless Curtain PIR Detector The SH-CRT is a wireless mirror curtain detector that provides solid curtain coverage up to 8m length by 3m height. The SH-CRT may be used for perimeter protection by setting up detection curtains along walls, windows, skylights. The Mirror detector SH-CRT use varifocal mirror that improves the focus and the level of energy received by the Pyro Sensor. Motion Detector with Mirror Optics Configurable detection range: 4-6m or 6-8m Powered by 1 lithium battery CR123 Battery life more than 5 years Configurable over-the-air by the Base Station Tamper Switch: Front cover and back tamper SPECIFICATION Detection Method Data Protocol APS Automatic Power Saving Quad Element PIR Freewave2 Two Way Protocol Yes Modulation Type Frequency Band Identification Event Transmission LED Indications Range in open Tamper Switch Supervision Time GFSK 868-869MHz / 916-917MHZ Unique ID serial number 24 bit Alarm, Tamper, Supervision, Low Battery Green LED: PIR channel Red LED during alarm space 500 m Optimal installation height 1.8m to 2.4m Current Draw Transmit power Power Supply Battery Life Operating Temperature Dimensions Weight (Inc. battery) Front cover removal & Back tamper 7 min by default (programmable between 1 to 30 min) Standby ~7 A Receive mode ~29 ma Transmit mode ~38 ma ~ 14dBm Lithium 3V battery type CR123 / Size 2/3AA Up to 5 years -10 C to +50 C 108mm x 58mm x 42.5mm 120 gr 10.
SH-PIRCAM INDOOR 2 Way Wireless Indoor PIR & Camera Detector The SH-PIRCAM Indoor is a two way wireless motion detector with a built-in CMOS high quality color camera that provides the perfect solution for visual alarm verification of your premises. When your control panel is armed and the PIR sensor detects movement, the detector sends an alert and transmit picture to the CMS or to your mobile phone (via CrowCloud ). Quad element Motion Detector ASIC based CMOS with VGA resolution Coverage up to 12m Pet Immunity up to 25kgs Configurable over-the-air by the Base Station Tamper Switch: Front cover and back tamper SPECIFICATION Detection Method Data Protocol Modulation Type Quad Element PIR & CMOS Camera for visual verification Freewave2 Two Way Protocol GFSK Frequency Band Identification Event Transmission LED Indications Tamper Switch Supervision Time Communication Range Picture Range Camera Picture Mode 868-869MHz / 916-917MHZ Unique ID serial number 24 bit Alarm, Picture(s), Tamper, Supervision, Low Bat Supervision Red LED during alarm Font Cover and Wall Removal 7 min by default (programmable between 1 to 30 min) space 500 m in open space 12 m Optimal installation height 1.8m to 2.4m CMOS camera with CIF or VGA resolution 16 Lux Color Picture (take picture only) 16 to 8 Lux B&W Picture with Gain Control 8 Lux B&W Picture with Gain control and IR LED illumination Current Draw Power Supply Battery Life Operating Temperature Dimensions Weight (Inc. battery) Average ~87 μa Receive mode ~24 ma Transmit mode ~38 ma 3 x 3V Lithium battery CR123 Up to 5 years -10 C to +55 C 131.5mm x 61mm x 50mm 200 gr 10.
SH-MAG 2 Way Wireless Door/Window Magnetic Contact The SH-MAG is an advanced magnetic contact sensor with integrated RF transceiver designed to be a fully supervised low-current device. A built-in reed switch and/or an external wired input may be applied in this device. Internal Reed Switch Coverage 500m in open space Powered by 2 Lithium batteries AAA 1.5V Battery life more than 5 years Configurable over-the-air Tamper Switch: Front cover removal Multicolor LED indications SPECIFICATION Detection Method Data Protocol Modulation Type Reed Switch Freewave2 Two Way Protocol GFSK Frequency Band Identification Event Transmission LED Indications Range Tamper Switch 868-869MHz / 916-917MHZ Unique ID serial number 24 bit Alarm, Tamper, Supervision, Low Battery Red LED during alarm 500 m in open space Front cover removal Supervision Time 7 min by default (programmable between 1 to 30 min) Current Draw Standby ~ 5µA Receive mode ~24 ma Transmit mode ~50 ma Transmit power ~ 12dBm Power Supply 2 Lithium batteries AAA 1.5V Battery Life Operating Temperature Dimensions Weight (Inc. battery) Up to 5 years -10 C to +55 C 100mm x 26mm x 16mm 80 gr 7.
SH-VIBMAG Wireless Vibration Detector & Magnetic Contact The SH-VIB is used to protect doors or windows by detecting vibrations caused by attempts to force them open (piezoelectric sensor) or signaling their opening (magnetic sensor). Sensitivity of the vibration sensor is configured remotely by using the EASY SHEPHERD s/w or the Shepheard app. Using the two built-in reed switches provides an option to choose the method of installation: the magnet interacting with the sensor can be placed either under or beside the detector, depending on the needs. The detector has a tamper switch and a test mode LED indicator. 8.
SH-GBD Two Way Wireless Shock & Glass Break Detector The SH-GBD is an Omni-directional Two Way Wireless Shock & Glass Break Detector, providing detection coverage of 180 measured from the sensor to the point on the glass farthest from the sensor. The SH-GBD detector transmits series of messages for full communication administration (Alarms, Supervision, Tamper Status, Battery Status, Configuration, etc.) as well as test transmission signals. 2 Way Wireless communication ISM Radio 2GFSK Frequency Band: 868MHz, 915MHz Low current Technology Powered by 2 Lithium batteries 1.5 Volt Battery life : up to 4 years Back Tamper (removal protection) Supervision transmission Battery status signal transmission Unique ID number (24 bits) Configurable over-the-air SPECIFICATION Detection Method Data Protocol Modulation Type Frequency Identification Events Transmission Supervision Time Range in open space Coverage Area Battery Battery life Current Consumptions Tamper Switch Operating temperature Dimensions Weight (inc. battery) Omni-directional Shock & Glass Break FreeWave2 GFSK (2 frequencies) 868-869MHz / 916-917MHz Unique ID serial number 24 bit Alarm, Tamper, Supervision, Low Bat. 7 min by default (configurable) 500m Up to 8m - 180º radius 2 Batteries Lithium 1.5V, model LR6, Size: AA Up to 4 years Standby ~11µA Receive mode ~24 ma Transmit mode ~45 ma Transmit power ~14dBm Back Tamper (Removal) -10 C to +55 C 85mm x 54mm x 21mm 120 gr. 9.
SH-SIRINT Two Way Wireless Indoor Sounder The SH-SIRINT is the ideal two way wireless indoor sounder for your premises particularly if outdoor sounders are prohibited or if extra intrusion alert is required. Fully standalone, this sounder is cable free installation and do not require any AC power. The sounder s two-way communication maintains continual supervised communication with the control panel SPECIFICATION Data Protocol Modulation Type Frequency Band Identification Indications Freewave2 Two Way Protocol GFSK 868-869MHz / 916-917MHZ Unique ID serial number 24 bit LED during transmission and Activation Range in open space Sound Pressure Level Siren Tone Frequency Range Current consumption Siren Alarm Period 500m More than 100dB at 1 meter yelp Low Battery Level 2.8V Low Battery Indication LED Indication Supervision Tamper Switch Power Supply Voltage Battery Life Operating temperature Dimensions Weight (Without Battery) 2700 ±500 Hz Standby: 60uA ±10uA Alarm: 250mA (average) Configurable from the control panel Message sent to the control panel Configurable from control panel Red/Green LED during warm-up and learning White LED during Alarm Sync signal every 1 min. Normally Closed 2 x Lithium batteries AA (Energizer L91 Type) Up to 5 years (Based on 2 min Piezo operation/ month) -10 C to +55 C 92.6mm x 30mm 200 gr 10.
11. 02. SAFETY & Air Quality
Smoke Detector FW-FLOOD Air Quality 12.
SH-SMK 2 Way Wireless Smoke Detector The SH-SMK is a two way wireless photoelectric smoke detector using low current technology. The detector automatically compensates for long-term environmentally induced changes to maintain a constant smoke sensitivity. When the drift compensation has reached its high or low limit of adjustment, the detector will go into the trouble state. Wireless Smoke detector Available in 868Mhz or 916Mhz Powered by of 2 Lithium 3V, Size: AA Battery life more than 10 years SPECIFICATION Detection Method Data Protocol Modulation Type Frequency Band Identification Event Transmission LED Indications Tamper Switch Photoelectric Smoke Detector Freewave2 Two Way Protocol GFSK 868-869MHz / 916-917MHZ Unique ID serial number 24 bit Alarm, Tamper, Supervision, Low Bat Supervision Red LED during alarm Font Cover and Removal Supervision Time 7 min by default (programmable between 1 to 30 min) Communication Range Detection sensitivity Alarm sound level Audible Warning Test mode / activation EMI rejection Battery Battery Life Operating Temperature Dimensions Weight (Inc. battery) space 500 m in open space 2.3+1.2%/ft 85 db at 3 m (10 feet) Built-in horn beeps ones Test mode Or Alarm Beeper test & Alarm transmission test up to 2 GHz > 10 V/m 2 x AA 1.5V Lithium/Iron More than 10 years -10 C to +55 C 124mm x 34.5 x 124mm 200 gr 13.
SH-FLOOD Way Wireless Flood Detector 2 The SH-Flood is an advanced flood sensor with integrated RF transceiver designed to be a fully supervised lowcurrent device. A built-in terminal connection for an external wired sensor applies in this device. Wireless Flood detector Available in 868Mhz or 916Mhz Powered by of 2 Lithium 3V, Size: AA Battery life more than 10 years SPECIFICATION Detection Method Data Protocol Modulation Type External golden contacts pins device Freewave2 Two Way Protocol GFSK Frequency Band Identification Event Transmission LED Indications Tamper Switch 868-869MHz / 916-917MHZ Unique ID serial number 24 bit Alarm, Tamper, Supervision, Low Bat Supervision Red LED during alarm Font Cover Removal Supervision Time 7 min by default (programmable between 1 to 30 min) Communication Range in open space Current Consumptions Battery Battery Life Operating Temperature Dimensions Weight (inc. battery) space 500 m Standby ~3 μa Receive mode ~29 ma Transmit mode ~38 ma Lithium. 3V Type: CR123A Size:2/AA Up to 5 years -10 C to +55 C 63mm x 23.3m x 63mm 100 gr SH-AQ SH-AQ is a unique detector which combines barometric pressure, relative humidity, ambient temperature and air quality. It is small and user friendly making it easy to integrate to your Shepherd system. Data is registered in Crow Cloud and user can monitor his ambient indoor air quality for his personal health and quality of life. SH-AQ turns your smartphone into a portable indoor air quality monitor. 14.
17. 03. HOME COMFORT
Smart Plug Door Lock 18.
SH-PLUG Wireless remote controlled AC plug socket for indoor use This SH-SPLG is easy-to-install and can be plugged into any socket of your choice, allowing you to control any electrical appliance rated less than 3200W (heater, lamp, etc ) either manually directly on the Plug, locally from panel or control device and/or remotely via mobile application. FW2 protocol 2GFSK modulation type Frequency Band: 868.35MHz / 916MHz Supervision transmission. Color LED indications Range up to 150m on open space. SPECIFICATION Detection Method Data Protocol Modulation Type Frequency Identification Event Transmission Supervision Time Communication Range Power Supply Current Consumptions Operating Temperature Dimensions Weight (inc. battery) Relay Switch OPEN / CLOSE FreeWave2 GFSK 868-869MHz / 916-917MHZ Unique ID serial number 24 bit ON/OFF Status, Supervision 7 min by default (configurable between 1 to 30 minutes) 150 m in open space Powered directly from the mains Standby ~24ma@220VAC Receive mode ~25 ma Transmit mode ~45 ma -10 C to +55 C 100mm x 50mm x 75mm 100 gr 19.
Door Lock Did your kids forget their keys? Is a neighbor or a friend stopping by? Unlock the door remotely from the comfort of your office or anywhere right from your smartphone, PC or any wireless mobile device. 20.
21. 04. SECURE AND EASY ACCESS
CLOUD PLATFORM & SMART APP 30. 22.
23.
24.
HEADQUARTERS: CROW ELECTRONIC ENGINEERING LTD. 12 Kineret St. Airport City, 70100 Israel Tel. +972 3 9726000 Fax. +972 3 9726001 sales@crow.co.il support@crow.co.il www.thecrowgroup.com INTERNATIONAL OFFICES: CROW LATIN AMERICA 7855NW 29 Street 150 Second Floor Doral - Florida, 33122 Tel. +1 305 513-4001 Fax. +1 305 513-4005 rejane@crowlatinamerica.com www.crowlatinamerica.com