Lighting of the future
LIGHTFIT the only LED-system, that makes the exchange of all the individual components possible without tools! Modularity Modular pluggable system consisting of: LED light source with high efficiency Very efficient electronic driver with radio communication interface Efficient optics with high light output Emergency lighting module with rechargeable batteries Communication Radio based communication network for smart lighting software for the commissioning, visualization, monitoring, maintenance and evaluation of the whole lighting system Optics Different light distribution options in order to adapt to the lighting task and object requirements New optical axis, that leads to plannable photometrical properties Emergency lighting Emergency lighting control module with monitoring You save between 45% and 55% of your energy costs with LIGHTFIT. With the lighting control the possible savings can go up to 70-80% on average.
Modularity & Exchangeability LIGHTFIT-luminaires fit into existing T8-sockets (G13) and use the mechanical suspension as well as the electric supply from CCG- or ECG-lamps Existing fixtures or trunking rails can remain without a change of the electrical installation, the invest cost is reduced Replacement of optics, LED-module, driver, if necessary battery (Emergency lighting) without tools In case of performance improvements, changes in use or malfunction every component can be separately supplemented or exchanged, the system grows with your demands, the lifetime of the lighting system is significantly expanded Thermal separation of heat-producing and thermosensitive parts Extension of the lifetime Fixture operation in safety low voltage (SELV) Operating staff is protected, non-electricians are allowed to exchange the luminaire s components Adapter for non-horizontal situated socket holes available Use of every type of standard luminaire possible LIGHTFIT Standard version LIGHTFIT Version with adapter
Communication & Control Integrated smart lighting control based on radio communication Light quantity scalable/dimmable (0-100%), grouping, presence- or day light control and regulation of the maintenance factor enable an additional reduction in energy consumption and an extension of the lifetime without further wiring Constant Light Output in every single fixture Prevention of over-lighting and additional energy saving by regulation of the maintenance factor Usage of a free frequency band (868 MHz) No disruption of usual Wifi-systems, clearly extended spread of radio waves Smart condition monitoring Burning-time counter, temperature measurements, current monitoring, emergency light functionality etc. (also as remote access) Operation in optimum mode and proactive maintenance extend the lifetime and reduce the operation costs Graphic operating software for installer and users Easy commissioning and operation No limitations in the amount of luminaires in operation systems Suitable for large halls and multiple buildings Planned design of lighting control ( Top down ) or continuous extension ( bottom up ) Lighting system can be extended step by step Monitoring of energy usage data All lighting data for the energy management (z.b. ISO 50.001) can be easily activated and are available to the user Software based identification of single fixtures in the overall system prevents an undesirable stand-alone lighting operation Theft protection (especially in public buildings or facilities) Software updates in the ongoing operation are possible at any time Quick and cheap operation optimization Positions of single fixtures in the building are stored in the software Quick localization in case of disturbances or exchange as well as acquisition of existing operating parameters without new programming
Optical characteristics Different optic versions (options of light refraction and scatter) with optimized light distribution curve Luminous intensity and uniformity can be adjusted individually to the lighting tasks Perfect lighting technology with high light output Lighting tasks are fulfilled optimally and energy efficiently Lighting intensity is continuously dimmable/ scalable (0 100%) Ideal adaptation to individual lighting demands New scalable optical axis The LIGHTFIT lighting has its own predictable lighting distribution curve and is independent from the lighting characteristic of the existing luminaire [%] 100% 50% 0% continuously dimmable/ scalable [Φ] 3 different optical chcaracteristics: standard (Lambert) wide beam narrow beam Emergency lighting and monitoring An additional module for emergency lighting with integrated and rechargeable single battery is available integration of emergency lighting in the general lighting system is available without any problems easy and cost-effective expansion and modification Emergency lighting monitoring according to EN 50172 by radio control (without additional wiring) manual control of the emergency lighting s functions is NOT necessary
LIGHTFIT brings additional value Flexible disassembly and conversion Modular, pluggable system Easy refitting of replacement and extension components (for example: emergency lighting) Maintenance can be done by non-electricians Sustainability Extremely long-life duration of the general system as the substantial components (optic, drivers, LED-module) can be exchanged separately Individual and ajusted lighting solution Light distribution (for example narrow beaming, wide beaming) can be adjusted individually for every luminaire through replaceable optic components Energy and economic efficiency Highest system efficiency of up to 150 lm/w Low invest costs through usage of available luminaires or simple new luminaires Minimal maintenance costs, as all the maintenance components are located outside of the LED body and maintenance can be easily carried out by anyone Radio-based controlling and visualizing Control and monitoring of every luminaire or luminaire groups through modern radio technology No additional wiring necessary Each luminaire or luminaire groups are programmable via software and can be represented in floor plan
Technical LIGHTFIT bringt data Mehrwert Length 1.500 mm 1.200 mm 600 mm Luminous flux: 4.500 lm 3.600 lm Power consumption: 31 W 25 W Luminous efficiency: 145 lm/w 145 lm/w Color temperature: 3.000 K / 4.000 K / 6.500 K 3.000 K / 4.000 K / 6.500 K Lifetime: > 50.000 h > 50.000 h in preparation For further details see product data sheet Certificates and standards The fixtures fulfil the certifications CE and VDE as well as the IEC 62776 No electro-professional is required for the replacement of fluorescent lamps in the CCG-operation the fluorescent lamp is simply replaced by a LIGHTFIT-luminaire and an additional starter. The replacement of fluorescent lamps in the ECG-operation has to be executed by an electro-installer - the ECG is bypassed. In doing so, the electro-professional (for example ARATRON) takes responsibility for the refurbishment.
ARATRON your partner for modern LED-technology Own development and production everything from one provider Made in Germany We develop and produce in our location in Kandel in the Palatinate region (Germany) For our products we use components from global market leaders Our team ensures a very high quality standard Our location enables us a high reaction speed and flexibility Long-time experience in the lighting industry More than 15 years of development, production, service and marketing experience Contact: ARATRON GmbH Jahnstraße 2b 76870 Kandel Phone: +49 7275 914 68 60 Fax: +49 7275 914 68 62 info@aratron.de