Memco Catalogue Digital Communications System Emergency Telephones Light Curtains Making Lifts Smarter, Simpler and Safer.
Detectors Table of Contents + Introduction to Avire 3 + Introduction to Digital Communication System 5 + DCP (Digital Communication Platform) 6 + Digital Audio Unit 8 + Digital Communication System Accessories 9 + Digital Communication System Installation 10 + The Avire Hub 11 + PSTN Telephones 12 + Memcom + 14 + Car Operating Panel Accessories 15 + Firefighter Unit 16 + Memcom Accessories 17 + Introduction to Light Curtains 21 + Panachrome + 22 + Pana40 Plus 24 + Contacts 26 Introduction Avire is a market leading and global manufacturer of light curtains, displays, emergency telephones, cellular communication and monitoring solutions for elevators. Our five brands are long standing and well-trusted by engineers, consultants and building managers alike. Our customers choose Avire because we are committed to exceeding their expectations and we strive for excellence in everything we do. Avire is part of the Infrastructure Safety Sector of Halma plc, a FTSE100 company with an annual turnover of over 1bn. Halma is an international leader in safety, medical and sensor technology with over 5,800 employees in around 50 businesses worldwide. Memco products have led the way with elevator-safeguarding for 40 years and have built a brand which is synonymous with trust, reliability and exceptional quality. Our products are now sold widely across the world to meet legislative demands and technology advances. Avire is committed to delivering innovative, high-quality engineering solutions that offer significant value to our customers. Investing in our research & development capability is of key importance to us and we now have Engineering teams dedicated to the development of Memco products located in the UK, Czech Republic and Spain. 1
Digital Communication System The Digital Communications System At the heart of the Digital Communications System is the DCP. This platform allows for two-way data communication and provides the foundations for a wealth of possibilities. It includes a GSM gateway, emergency telephone and M2M gateway in a single unit and complies with EN81-28 and EN81-70 standards. Using data to improve efficiency is not a new concept and the Digital Communications System brings this to lifts, without the cost and hassle of installing a new controller. With remote configuration and monitoring the DCP allows customers to have real time information regarding lift status for the purposes of predictive maintenance and to inform decision making.* The products within the Digital Communications System are easy to install as we understand the need for minimising installation and programming time. There are also options for both on site and remote programming. The Avire Hub is a cloud based platform and allows for monitoring and configuration from any internet connected device. The Avire Hub's intuitive user experience takes the hassle out of monitoring devices and staying compliant to industry standards with actions such as 3 day test calls and technical alerts. TURN COMPLEXITY INTO SIMPLICITY Cellular Data Our Digital Communication Platform (DCP) transmits data over the cellular network s data channels (2G/GPS and 3G), unlike older systems which use the voice channel. Utilising the data channel means that information can be transferred faster and more reliably. In addition call costs are lowered because the voice channel is only used for two way voice communication. CAN Bus All of the digital audio modules within the system connect to the DCP by a 4 wire CAN Bus. This allows for quick & easy installation and addressing of the modules, as well as the option to add in additional sensors and CAN enabled devices. Lift Telemetry Using either a serial connection (RS232/ RS422/RS485) to the lift controller, or connected sensors, lift and controller status can be monitored remotely using either lift controller manufacturers software or the Avire Hub. Throughout this catalogue the logo above indicates that the product works with the Avire Hub. *Currently of Memco Emergency Telephones systems but soon to be extended to our other product lines, and in future full lift monitoring. 2 3
Digital Communication System DCP Digital Communication Platform The Memco DCP combines a GSM gateway, emergency telephone and M2M gateway in a single unit. This system is ideal for those seeking to: Install an EN81-28 compliant emergency telephone system for up to four lifts Upgrade an existing emergency telephone system from a PSTN connection to GSM Reliably configure, update and monitor connected devices remotely Gather and stream data from a lift controller via the cellular network All programming for the system is either carried out remotely from the Avire Hub or at the main unit in the machine room or control cabinet. Digital Audio Units (DAU) in the lift cars and/or pits connect to the DCP over a 4 wire CAN Bus system. All technical and configuration calls are sent over the data channel of the cellular network, reducing voice call costs and significantly improving reliability. ++ EN81-28 compliant ++ Integrated battery back-up ++ 4-wire CAN Bus connections to lift car, landing and pit devices ++ High audio quality over 400m cables ++ Technical, 3-day background and configuration calls carried out over data network for high reliability and low costs ++ Machine room or lift controller mounted ++ Supports up to eight separate Digital Audio Units or PSTN Telephones ++ CAN and RS-232 or RS-422/485 connections for lift controller ++ Signal strength indicator It is recommended that the DCP is used with Digital Communication System accessories but is also backwards compatible with the full range of Memco telephone products. DCP Specifications Parameter Value Power Supply 220-240 VAC Consumption 1.8 to 10 VA Internal Battery 12V, 600 mah, 9 hr Connections CAN, RJ-11, RS-232 or RS-422/485 Networks 2G or 3G Op. Temp. -40 to +85 oc Dimensions 210 x 110 x 65 mm DCP Part Numbers Part Description MC-2CM10-100-F-20-000 Digital Communication Platform - GSM/GPRS/2G/RS-232 MC-2CM10-100-F-40-000 Digital Communication Platform - GSM/GPRS/2G/RS-422/485 MC-3CM10-100-F-20-000 Digital Communication Platform - GSM/GPRS/3G/RS-232 MC-3CM10-100-F-40-000 Digital Communication Platform - GSM/GPRS/3G/RS-422/485 Reliable and Cost Effective Connectivity Made Simple Remote Monitoring All transmission between the gateway unit and the outside world is carried over the mobile data network unless an entrapment voice call is placed. This minimises ongoing call costs to the installation owner, improves the reliability of telemetry and remote updates, and enables instant communication with cloud monitoring systems. All modules within the digital audio system are connected via a fourwire CAN Bus. This plug-and-play setup makes initial installation quick and easy, and enables lift engineers to quickly connect sensors, displays, and additional modules to the system as required. All voice and data communication takes place over two wires, with power provided locally or via the remaining two wires in the CAN Bus. The serial interface (RS232 or RS223/ RS485) and CAN Bus connections on the DCP allow for machine to machine (M2M) communication with lift controllers and connection to sensors within the lift installation to retrieve data on system performance and status. For more information, download our product datasheet at http://www.avire-global.com 4 5
Digital Communication System Digital Audio Unit The Digital Audio Unit (DAU) is mounted behind the car operating panel (COP) and works when connected to the DCP. The DAU is connected to the DCP by a 4-wire CAN Bus which provides power and communication. Easy to connect using plug-and-play 4-wire CAN Bus Does not require a local battery or power supply The digital connection between the DAU and the DCP provides high audio quality compared with analogue telephone solutions, even over 400m of cable Digital Communication System Accessories ++ EN81-28 and EN81-70 compliant ++ Integrated battery back-up ++ 4-wire CAN Bus connections to lift car, landing and pit devices ++ High audio quality over 400m cables ++ Technical, 3-day background and configuration calls carried out over data network for high reliability and low costs ++ Machine room or lift controller mounted ++ Supports up to eight separate Digital Audio Units or PSTN Telephones ++ CAN and RS-232 or RS-422/485 connections for lift controller Triphony Unit (MC-DAT01-100-0-08-000) Compact audio module for remote alarm points around lift (such as top of car) ++Simple plug-and-play connection to Digital Audio Unit in COP (ethernet cable provided) ++Can be used as local intercom point or to make external alarm calls (short/long press of button) ++Powered via Digital Audio Unit ++Ability to daisy chain units 2 inputs, one output (e.g. Digital Audio Unit to top of car, and top of car to bottom of car) ++Two LEDs indicate device and call status Digital Audio Unit PIT (MC-DAP01-100-F-08-000) Compact audio module for pit of lift shaft remote alarm point. ++Compliance to EN81-28; provides remote alarm initiation point in the pit ++Robust housing Specifications ++LEDs to indicate call and device status Parameter Value Power Supply 10 to 30 VDC Consumption 30 to 150 ma Connections CAN or RS-485 Op. Temp. -40 to +85 oc Dimensions 150 x 68 x 30 mm CAN Bus Splitter (MC-ASM00-100-F-00-000) Allows the DCP to connect to more than two Digital Audio Units (including Pit variant) ++ power required ++Consolidates up to four CAN Bus circuits into one Part Numbers Part Description MC-DAB00-100-F-C8-000 Digital Audio Unit with CAN Bus MC-DAB00-100-F-08-000 Digital Audio Unit Provides EN81-70 compliance for hard of hearing passengers MC-DAB00-100-F-48-000 Digital Audio Unit with RS485 Inductive Loop (MC-AAT00-100-0-08-000) ++Amplifier component connected to DAU with input for three antenna types Small COP antenna (MC-ALF00-100-0-00-000) Large loop installed on car roof (MC-ALT00-140-0-00-000) Large loop within car wall (MC-ALT00-160-0-00-000) Universal Power Supply (MC-ABV10-100-0-00-000) Mounted in the motor room and used to power the DCP when more than two Digital Audio Units are connected (which in turn drives the whole DAU system through the CAN Bus connections) ++Mains input (85-230VAC 50/60Hz), ++Constant output 12VDC 1A For more information, download our product datasheet at http://www.avire-global.com 6 ++Two LEDs to indicate power status 7
Digital Communication System Digital Communication System Installation DRIVING INSIGHTS FROM EVERYDAY LIFT DATA MONITORING CONFIGURATION DCP EN81-28 compliant monitoring of emergency telephones Remote configuration Remote firmware updates Digital Audio Unit Triphony Unit Triphony Unit Provides the interface to receive updates from all connected devices to remotely monitor lift status and, in the future, provide data for predictive and preventative maintenance Implement updates and new features to all connected devices ensuring you have the latest, most up-to-date functionality MAINTENANCE MODE Lift monitoring using Avire sensors Monitor Displays Monitor light curtain functionality Configure Avire sensors Display layout updates Digital Audio Unit Pit BENEFITS Accessible from any web-enabled device without the need for extra hardware On-the-go access to view all Avire connected devices User access management feature 8 For more information, download our product datasheet at http://www.avire-global.com avire-global.com Please contact your local sales representative for information regarding solutions available in your market.
PSTN Emergency Telephones The Memco range of PTSN Emergency telephones is long standing and has been developed and tailored to fit the lift industry's needs over ten years. Providing both EN81-28 and EN81-70 compliance, our product ranges include both Top Of Car (TOC) and Car Operating Panel (COP) mounting options along with all the necessary accessories such as speakers, inductive loops and our wiring looms; a key accessory for working with many OEM lifts to save time and hassle. We understand the need for minimising installation and programming time; therefore our solutions are easy to install and have a variety of programming options for both on site and remote programming. Memcom includes an inbuilt LCD and keypad, together with a simple tick & cross programming menu. This provides engineers with an easy-to-use interface; allowing any errors to be quickly and easily identified and resolved. All Memco emergency telephones can be programmed remotely using a touchtone telephone or the Avire Hub. The Memco range also comes with P100 protocol. The Avire Hub is a cloud based platform which allows for monitoring and configuration from any internet capable device. The Avire Hub's intuitive user experience takes the hassle out of monitoring devices and staying compliant to industry standards with actions such as 3 day test calls and technical alerts. The Memco range also comes with P100 protocol and GSM options. 10 PSTN Telephones Gateways EN81-28 Monitoring Avire s emergency telephones are easy to fit and program and provide reliable alarm points for trapped passengers and service engineers. They perform periodic self-checks and will place calls to report technical faults and lift usage. Avire gateways can be used in place of landlines and provide a reliable connection to the outside world. Installation and monthly costs of landlines can be expensive to route to the top of a lift shaft, expensive to maintain compared to a monthly SIM contract, and are often replaced by digital systems in new buildings. Furthermore, GSM gateways have greater levels of redundancy than fixed landlines, as they are able to switch to a new mobile tower in the event that signal from one goes down. Avire telephones place routine calls and perform self-checks as required with EN81-28. These calls can be logged either at a call centre or using an Avire monitoring platform giving both the installer and the building owner peace of mind. 11
Emergency Telephones Memcom+ Emergency Telephone ++ Allows full compliance with EN81-28 and EN81-70 ++ Connect up to 8 Memcom+ units to the same phone line ++ Up to 4 alarm numbers and 2 technical alarms ++ Backlit LCD display for programming and status information The Memcom emergency telephone provides both a fully complaint EN81-28 & EN81-70 autodialler and an engineer s intercom for safer and more efficient installations. + ++ Stand-alone battery back-up of complete system including GSM Memcom connects to our Multi Point Station (MPS) accessories by a simple two-wire bus. The MPS units, powered and battery backed by the Memcom+, are both engineer s intercom points and EN81-28 remote alarm points. 453 011 453 000 24VDC or 80-250VAC (TOC) 115 x 300 x 30 COP Accessories Features Chart 24VDC (COP) *Able to work on VOIP/NGN networks using a VOIP to analogue converter, or the analogue port on the VOIP master station **Up to 5 additional MPS stations can be added to the system, but each will require its own 24V power supply For more information, download our product datasheet at http://www.avire-global.com 12 Connection Alarm Options Points PSTN/PBX/ GSM/VoIP* Designed to reduce the amount of modification required inside the elevator car, all COP accessories are delivered pre-wired to increase speed of installation and reduce time spent on site. ++ Able to work on VOIP/NGN networks using a VOIP to analogue convertor, or the analogue port on the VOIP master station Memcom Emergency Telephone Specifications Dimensions Compliance (W x H x D) (mm) EN81-28 / EN81-70 / EN627 Our solutions range from simple lightweight speaker/ microphone units with LED indicators to show call in progress and call acknowledgement, to premium stainless steel plates incorporating pictograms and alarm push buttons. ++ Avire Hub allows easy management of technical alerts and EN81-28 test calls and the ability to remotely program and re-program installed units Memcom can be connected to either a PSTN landline or via a DCP acting as a gateway. Power Supply The Memcom emergency telephone product range includes a comprehensive selection of Car Operating Panel (COP) accessories providing a wide choice of system finishes. ++ Easy programming using a simple tick box system + Part. Car Operating Panel Accessories 4** Intercom Points 4** Battery Integrated Integrated Tick Box Back-up Keypad Display Programming SS Plate/ enclosure Integrated LED Indicators/ pictograms Integrated pictograms are US91 Integrated Alarm Push Button Integrated US91 Alarm Push Button Part. Product Description Dimensions 450 880-01 External microphone with 4m cable 450 880-03 External speaker 450 883-01 COP Speaker / Microphone Accessory mounted on a Plastic plate 79x75 450 883-01/T COP Speaker / Microphone Accessory mounted on a Plastic plate, with a 10m cable 79x75 450 883-02 COP Speaker / Microphone Accessory mounted on a Plastic plate, with integrated Green and Yellow LED indicators 79x75 450 883-03 COP Speaker / Microphone Accessory mounted on a Plastic plate, with integrated Green and Yellow LED indicators and alarm push button 79x75 450 250 Stainless steel COP plate accessory with integrated speaker and microphone 200x80 450 200 Stainless steel COP plate accessory with integrated speaker, microphone, Call Waiting and Call Acknowledged pictograms 200x80 450 210 Stainless steel COP plate accessory with integrated speaker, microphone, Dual illuminated Alarm push button and Call Acknowledged pictogram 200x80 450 340 Stainless steel COP plate accessory with integrated speaker, microphone, Dual illuminated Alarm push button and Call Acknowledged pictogram with EN81-71 compliance 188x90 450 260 COP surface mount speaker / microphone acccessory 139x89x25 450 270 COP surface mount speaker / microphone acccessory with integrated pictograms 139x89x25 450 280 COP surface mount speaker / microphone acccessory with integrated pictograms and alarm button 139x89x25 450 290 COP surface mount speaker / microphone acccessory with integrated pictograms, alarm button and inductive loop 139x89x25 13
Memcom Accessories Memcom Accessories Memcom Multi Point Station (MPS) (492 021) Part. The Memcom Multi Point Station (MPS) provides external emergency telephone points for the elevator engineer in the shaft, pit or machine room. This easy-to-install unit allows local communication between different points of the elevator installation, a considerable benefit during commissioning and installation of the elevator. 492 021 Memcom Multi Point Station (MPS) 451 000 Inductive loop 494 053 Wiring Loom compatible with OTIS REM/GEN2 450 887-02 Wiring Loom compatible with Thyssenkrupp Galaxy, Synergy and Ysis 450 887-03 Wiring Loom compatible with Schindler Smart Lifts 450 887-04 Wiring Loom compatible with KONE KRM 450 887-06 Wiring Loom compatible with Sodimas 450 887-07 Wiring Loom compatible with Otis REM6 450 880-02 Wiring Loom compatible with Orona ARCA2 450 880-03 Wiring Loom compatible with Orona ARCA3 450 880-08 Wiring Loom compatible with Orona ARCA3(GERMANY) US 91 yellow jewel 30mm round pictogram Spares & Accessores 450 881 In-car instruction plate. Sticky back 491 003-003 BT male plug with 3m cable to loose end Switch spur with cable 450 880-04 Spare battery for Memcom + Allows local communication between different MPS points assisting in elevator installation 450 882-02 Adaptor for BT line 450 300 Top of Car enclosure + Adjustable volume and status LED 494 020 Inductive loop test meter + Allows compliance to EN81-28 and EN81-70 494 054 Alarm push button- 30mm round, 12V, dual illuminate + 2-wire system and screwless connectors for easy installation Product Description 450 887-01 US 91 green jewel 30mm round pictogram 450 880-06 + Universal use - pit, machine room, cabin roof or under the cabin Part. Pictogram 494 051 Using a 2-wire connection, up to 3 MPS units can be wired in parallel back to the Memcom. The system is fully supported by the Memcom integral battery, but can be boosted using 24VDC. Product Description System Inductive Loop (451 000) The Memcom Inductive Loop ensures that passengers with limited hearing can hear emergency messages and operator instructions when trapped in a elevator. + Necessary to meet EN81-70 + Fully compatible with existing emergency telephone installations + Quick and easy to install + High-quality sound + Battery back-up (through Memcom unit) Memcom Wiring Looms The Memcom wiring looms have been developed to allow the quick and simple integration of a Memcom unit into installed lifts, and for the existing pictograms and alarm push button on the lifts to be utilised. Looms are currently compatible with OTIS, Thyssenkrupp, Schindler, KONE, Sodimas and Orona lifts. + Pre-wired into the Memcom terminal block + Labelled connections for every connection required on the lift + Integrated relays where required + Reduce installation complexity + Allow the existing pictograms and alarm push button to be utilised + Speed up installation + Reduce the risk of wiring errors For more information, download our product datasheet at http://www.avire-global.com 14 15
Emergency Telephones Memcom+ with DCP Installation Memcom MPS DCP Memcom Elevator Emergency Telephone Surface Mount COP Accessory Memcom MPS For more information, download our product datasheet at http://www.avire-global.com 16 16 17 17
Introduction to Light Curtains Avire has supplied light curtains to the elevator market for over 30 years and has always been at the leading edge of the industry. More than two million Avire light curtains have reached customers ranging from global elevator manufacturers to local, independent installers. All Avire products are designed with absolute customer safety in mind. All Memco light curtains are manufactured at our ISO accredited factory in the EU. They are built for quick installation, enhanced durability and maximum safety, whether installing in a factory or in the field. Memco light curtains are fully compliant to EN81-20 and we offer a range of protection features to suit different customer needs. These features include or 3D detection, a range of different profile designs and the option to incorporate visible light indicators to highlight door movement. 3D Detection Visible Light Indicators Diagnostic Output In addition to detection in the dooway, Memco Panachrome and Pana40+ products can extend passenger protection to the landing area. Reflective infra-red technology allows approaching passengers to trigger the doors to reopen before they reach the lift. This feature, offering enhanced safety, is ideal for high traffic installations such as hotels, hospitals and airports. The patented red and green indicators on the Panachrome have been proven to reduce damage to installations and to enhance passenger safety. When combined with 3D detection in Memco s premium product, this offers maximum passenger safety and cost-saving potential to the end user. The diagnostic output acts as a second relay and activates whenever a diode goes into timeout mode. As a result, the door controller can be put into a safety mode if any diodes are permanently blocked and detector sensitivity is reduced. 19
Detectors Panachrome+ 3D and Specifications Panachrome + A true innovation in elevator door safeguarding, Memco Panachrome+ provides the elevator industry with a revolutionary detection system for maximum safety. This unique solution has red and green indicators which operate on door movement to visually show the opening and closing of the doors. Installations using Panachrome+ or 3D detection often result in a reduction in door damage and this means less downtime. This premium light curtain is also available with 3D detection in the landing zone for enhanced passenger protection and is typically used in high-traffic applications. Both the visible indicators and the 3D detection improve safety for passengers and have been shown to significantly reduce door damage. ++ EN81-20 & EN81-70 compliant ++ Red and green indicators highlight door movement which can reduce door damage Part. Product Description G3510 000. of Diodes. of Beams Max. Range Light immunity IP Rating Operating Temp. EMC Compliance Ultraslim 10mm 48 234 6m Range >100,000 lux IP65-10 C to +65 C Emissions to EN 12015:2014; Immunity to EN12016:2013 Standard 43mm 48 >100,000 lux IP65-10 C to +65 C Emissions to EN 12015:2014; Immunity to EN12016:2013 2000mm Ultraslim 10mm 48 234 6m Range >100,000 lux IP65-10 C to +65 C Emissions to EN 12015:2014; Immunity to EN12016:2013 2005mm Standard 43mm 48 234 6m Range >100,000 lux IP65-10 C to +65 C Emissions to EN 12015:2014; Immunity to EN12016:2013 Height Profile Set of Panachrome+ 3D Light Curtains 2000mm Set of Panachrome+ 3D Light Curtains 2005mm G2510 000 Set of Panachrome Light Curtains G2540 000 Set of Panachrome Light Curtains G3540 000 3D - half-door separation (up to 1.2m from doorway) 234 6m Range 3D - half-door separation (up to 1.2m from doorway) ++ and 3D detector models available ++ Dense 234 infrared beam pattern ++ 4m pluggable extension cable ++ Suitable for centre- and side-opening doors ++ Typical applications include hospitals, hotels and airports Panachrome+ 3D & Universal Controller Specifications Part. Dimensions (mm) G3850 000 240 x 172 x 51 ++ Available in 10mm and 43mm profile Power Consumption Voltage Door Operator Relay Timeout 30VA maximum with detectors fitted, visual indication on Universal AC supply 85-240VAC or 15-48VDC 240VAC, 24VDC at 5A Switched ON/OFF 10-70 seconds adjustable Operating Temp. -10 C to +65 C Panachrome+ Accessories (included with light curtains) Previous version Spare Parts Part. Product Description Part. Product Description 015 455 Panachrome 4m extension cable C3510 000 Set of Panachrome 3D Light Curtains (10mm profile) 091 360 Flat fixing bracket for leading edge/slampost mounting with self-tapping screws C3540 000 Set of Panachrome 3D Light Curtains (43mm profile) 091 365 L Fixing bracket C2510 000 Set of Panachrome Light Curtains (10mm profile) C2540 000 Set of Panachrome Light Curtains (43mm profile) C2850 000 Panachrome Controller C3850 000 3D Panachrome Controller For more information, download our product datasheet at http://www.avire-global.com 20 21
Light Curtains Pana40 Plus Controller Specifications Pana40 Plus Product Description. of Beams Pana40+ Scan Time Pana194 Scan Time Cables Supplies 841 000 Pana40 Plus Controller 40 45ms (40 beams) - 2 x 4m ext. cables 202mm x 186mm x 52mm 5VA max. with light 110/240VAC curtains fitted 841 012 Pana40 Plus Controller 194-200ms (194 beams) 2 x 4m ext. cables 202mm x 186mm x 52mm 5VA max. with light 110/240VAC curtains fitted 841 008 Pana40 Plus 3D Controller 40 45ms (40 beams) - 2 x 4m ext. cables 202mm x 186mm x 52mm 5VA max. with light 110/240VAC curtains fitted 841 009 Pana40 Plus 3D Controller 194-200ms (194 beams) 2 x 4m ext. cables 202mm x 186mm x 52mm 5VA max. with light 110/240VAC curtains fitted ++ 40 parallel or 194 criss-cross beams offer protection up to a height of 1.8m 843 030 Pana40 Plus 3D Diagnostic Output 194 200ms (194 beams) 2 x 4m ext. cables 202mm x 186mm x 52mm 5VA max. with light curtains fitted 240VAC ++ 3D detection provides extended protection into the landing area 843 031 Pana40 Plus Disgnostic Output 194 200ms (194 beams) 2 x 4m ext. cables 202mm x 186mm x 52mm 5VA max. with light curtains fitted 240VAC Part. Pana40 Plus is one of the most established products within the Memco range and is renowned for being an exceptionally high quality, reliable solution. Pana40 Plus has 40 diodes making it compliant to the EN81-20 standards. The Pana40 Plus is available in or 3D versions and operates via an external control unit which accepts voltages of 110/240VAC and 11-25VDC. The Pana40 Plus controller can drive any or 3D Pana40 Plus light curtains. Depending on the configuration, either a 40 beam or 194 beam pattern will be generated between the detector edges. ++ EN81-20 and EN81-70 compliant ++ Suitable for centre-opening or side-opening doors Pana40 Plus 2-in-1 and 3-in-1 versions are also available in this range. A 2-in-1 version is a light curtain with a mechanical edge and a 3-in-1 version is a 3D light curtain with a mechanical edge. - Dimensions Power Consumption Voltage Timeout Operating Temp Switched ON/ OFF 10-70 -10 C to 65 C seconds by pot EMC Compliance Emissions to EN12015:2004; Immunity to EN12016:2004 Please contact your local sales representative if you need advice on which controller you require ++ Diagnostic LEDs ++ Enhanced light immunity for installations exposed to bright light ++ Available in Standard, Leading Edge, Slimline, Ultraslim and Slampost profiles Pana40 Plus Specifications Part. Product Description 740 040 Detection Height Profile Universal Fixing 2100mm 43mm 741 000 Slimline 2000mm 15mm 743 000 Ultraslim 2000mm 9mm 744 010 Slampost Limpet 2100mm 40mm 744 020 Mixed Limpet 2100mm 40/43mm 744 040 Slampost Limpet 2000mm 40mm 770 040 Universal Fixing 3D 2100mm 43mm 771 000 Slimline 3D 2000mm 15mm 774 000 Ultraslim 3D 2000mm 9mm 745 xxx Set of Pana40 Plus 2-in-1 Light Curtains 2115mm 20mm 1900mm 25mm. of Diodes. of Beams Max. Range Set of Pana40 Plus 2-in-1 Light Curtains 40 40 or 194 depending on controller used 6m 5m 6m 6m 2270mm 775 xxx Set of Pana40 Plus 3-in-1 Light Curtains 3D 2110mm 20mm 2130mm 22mm 2100mm 25mm Operating Temp. EMC Compliance 100,000 lux IP54-10 C to 65 C Emissions to EN12015:2004; Immunity to EN12016:2004 4m 2070mm 20mm IP Rating 6m 2115mm 755 xxx Light Immunity Pana40Plus Accessories Part. Product Description Part. Product Description 007 035 Sightguard 40mm wide 2.1m high for Slimline & Ultraslim 015 199 P40+ 4m extension cable 007 045 Sightguard 46mm wide 2.1m high for Slimline & Ultraslim 616 800-010 Static fixing kit c/w fixing screws (Ultraslim only) 007 065 Sightguard 30mm wide 2.1m high for Slimline & Ultraslim 743 803 Ultraslim clamp plate kit (per light curtain) 007 137 Right hand finger guard 16mm wide 2.1mm high for 771 Slimline 3D 741 800-002 Slimline clamp plate (per light curtain) 007 138 Left hand finger guard 16mm wide 2.1mm high for 771 Slimline 3D 001 888 Igus chain 0.8m (for use with extension cables) 001 889 Igus chain 1.2m (for use with extension cables) 5m For more information, download our product datasheet at http://www.avire-global.com 22 23
24 tes
Contacts Office Locations Australia India Singapore Unit 16 69-73 O Riordan Street P O Box 6414 Alexandria NSW 2015 Australia T: +61 (2) 9669 1102 F: +61 (2) 6963 1137 Plot no. A/147 Road Number 24 Wagle Industrial Estate Thane (W), India, 400604 T: +91 22 4124 8000 F: +91 22 4124 8080 8 Admiralty Street, #05-02 Admirax, Singapore 757438 Singapore T: +65 6776 4111 F: +65 6774 7555 China Italy Spain 4th floor, G Building, 1999-2059 Du Hui Road Shanghai 201108 China T: +21 64953748 F: +21 64859264 Via G. B. Pergolesi, 8 20124 Milano Italy M: +39 335 5994156 C/Castillo de Fuensaldaña, 4-of.127 Edificio Rozas va 28232 Las Rozas, Madrid, Spain T: +34 91 636 35 02 F: +34 91 637 39 06 Eastern Europe Japan Spain - Setco Okruzni 2615 370 01 Ceske Budejovice Czech Republic T: +387 005 602 F: +387 005 695 104-0031 東京都中央区京橋 3 丁目 9-7 京橋鈴木ビル 5F T: +81-35579 9039 F: +81 50 3730 0847 Setco S.A. Miquel Romeu 56 08907-L Hospitalet de Ll. Barcelona T: +34 932 611 760 France Malaysia UK ZAC des Portes de l Oise 9 Bis Rue Léonard de Vinci 60230 Chambly France T: +33 (1) 30 28 95 39 F: +33 (1) 30 28 24 66 Suite 39, 15-1, Menara 1 Mont Kiara. 1, Jalan Kiara, Mont Kiara 50480 Kuala Lumpur Malaysia T: +603 7493 5152 F: +603 7493 5901 Unit 1, The Switchback Gardner Road Maidenhead Berks SL6 7RJ T: +44 (0) 1628 540 100 F: +44 (0) 1628 621 947 Germany Middle East USA Am Zeughaus 9-13 97421 Schweinfurt Germany T: +49 (0)9721 38656-0 F: +49 (0)9721 38656-99 c/o Netherlocks City Tower 2, Sheikh Zayed Road 48 8th Floor, Office. 804B/C United Arab Emirates T: +971 4 295 5648 F: +971 4 295 5649 415 Oser Avenue Suite Q Hauppauge NY 11788 T: +1 631 864 3699 F: +1 631 864 2631 http://www.avire-global.com/contact-us/ Memco PC/UK V05 Memco is a registered trademark of Avire Ltd