Λευκωσία, 9 Μαϊου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Similar documents
Λευκωσία, 14 Ιουνίου ΘΕΜΑ: May 2016 Notification Procedure 1025/2012. Κυρία/Κύριε,

Λευκωσία, 27 Δεκεμβρίου Κυρία/ε,

Λευκωσία, 4 Ιανουαρίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 11 Οκτωβρίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 8 Δεκεμβρίου ΘΕΜΑ: November 2016 Notification Procedure 1025/2012. Κυρία/Κύριε,

Λευκωσία, 19 Απριλίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 12 Μαρτίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 24 Σεπτεμβρίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 8 Νοεμβρίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 18 Μαϊου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

ΘΕΜΑ: December 2015 Notification Procedure 1025/2012

Εισήγηση για δημιουργία νέας Ευρωπαϊκής Τεχνικής Επιτροπής Τυποποίησης με θέμα Food Authenticity

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Ιανουάριο 2019, μπορείτε να τα δείτε στο ακόλουθο link:

Η Δημοσίευση έχει γίνει την Παρασκευή 6 Ιουλίου 2018 /Παράρτημα Τρίτο- Μέρος 1/Αρ. 5097/Κ.Δ.Π. 190/2018 και Κ.Δ.Π 191/2018.

NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (August, 2013)

Notifications over Directive 98/34/ЕС (October, 2011)

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης μπορείτε να τα δείτε στο ακόλουθο link

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Ιούλιο 2018, μπορείτε να τα δείτε στο ακόλουθο link:

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015

NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (May, 2016)

Monthly Notifications Register

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018

NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (December, 2016)

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. July 2017

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Αύγουστο 2018, μπορείτε να τα δείτε στο ακόλουθο link:

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2017

Λευκωσία, 22 Αυγούστου Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC. Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν:

This document is a preview generated by EVS

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

This document is a preview generated by EVS

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Φεβρουάριο 2018, μπορείτε να τα δείτε στο ακόλουθο link

Aggregates Table 1 No. Title Options

CEN System - Delegated Decisions Dispatch 14:2017

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2014

NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (January, 2018)

Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Οκτώβριο 2017, μπορείτε να τα δείτε στο ακόλουθο link:

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2017

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. January 2018

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2018

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2016

FINAL DRAFT FprEN

НОВИ НАЦИОНАЛНИ ИНИЦИАТИВИ ЗА СТАНДАРТИЗАЦИЯ, НОТИФИЦИРАНИ В СЕКТОРИТЕ ОТ ОБЛАСТТА НА СТАНДАРТИЗАЦИЯ НА CEN/CENELEC (април, 2017)

Monthly Notifications Register

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Notifications over Directive 98/34/ЕС (March, 2012)

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2018

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2015

DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Contents. EN :2012 (E) Issue 5 ( ) Page

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

STS Directory Accreditation number: STS 0030

National foreword. Compliance with a British Standard cannot confer immunity from legal obligations.

BUSINESS PLAN CEN/TC 337. Road operation equipment and products

NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (June, 2016)

INTERNATIONAL STANDARD

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. September 2015

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General

Monthly Notifications Register

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

Monthly Notifications Register

CEN System Delegated Decisions Dispatch 33:2016

NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (August, 2017)

Standards and Standardisation. An Overview

ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. October 2014

Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν:

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2018

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2016

This document is a preview generated by EVS

This document is a preview generated by EVS

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2017

STS Directory Accreditation number: STS 0329

Monthly Notifications Register

Standardization Programme ( ) Building & Construction Standards Committee

Notifications over Directive 98/34/ЕС (November, 2011)

asphalt applications European Asphalt Standards and their application in the UK mpa asphalt Asphalt Information Service Mineral Products Association

This document is a preview generated by EVS

Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania

Monthly Notifications Register

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD. Non-destructive testing Magnetic particle testing Part 2: Detection media

National foreword. Text affected

SOUTH AFRICAN NATIONAL STANDARD

Monthly Notifications Register

This document is a preview generated by EVS

Bitumen and bituminous binders - Specifications for paving grade bitumens

This document is a preview generated by EVS

Sýnishorn Maintenance - Qualification of maintenance personnel

ELSTA MOSDORFER- Energy Distribution with Competence

Transcription:

Λευκωσία, 9 Μαϊου 2017 ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: meropi@ccci.org.cy, Ιστοσελίδα:www.ccci.org.cy

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Register issued on : 2017-05-08 A list of subsectors can be found at the end of this document.

Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector A : SERVICES Register issued on : 2017-05-08

Subsector A08: FUNERAL SERVICES Page 3 Subsector : A08 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-27 ID : P0040506/0002 Draft for public enquiry PNE 190002 Coffins. Test Methods. This standard describes test methods to assess the structural strength of common and specialcoffins. The test methods apply to coffins of any size and shape, regardless of the materials they are constructed. This standard applies also to those coffins exclusively made for incineration. REV/AMD UNE 11030:1993, UNE 11030:1993 ERRATUM:2009 Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : 2017-04-19 TSE Turkey ID : t2012257/0001 03.080.30 Student and personnel transport services- General rules This standard includes, general rules for management, transport services characteristics driver, guide and passanger of student and personnel transport services Subsector A99: UNDETERMINED Subsector : A99 Registration Date : 2017-04-27 UNI Italy ID : 01602950/0001 03.080.30 UNI1602950 Estimation of the beach facilities value. Guidelines The aim of the standard is to provide a guideline for estimating the value of the beach facilities. Moreover, it enable beach operators to prepare the appropriate documentation to request the new state property concession in cases of administrative procedure by a formal act. This guidelines is applicable to a state property concession where a beach facility already insists or that a new one has to be built.

Page 4 ** End of Sector **

Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2017-05-08

Subsector B01: FIRE PROTECTION Page 6 Subsector : B01 Registration Date : 2017-04-21 NBN Belgium ID : BE664041/0001 Draft for public enquiry 13.220.20 NBN S 21-100-1:2015/prA1 Fire detection and fire alarm systems - Part 1: Rules for risk analysis and assessment of the needs, the study and the design, installation, commissioning, control, use, inspection and maintenance REV/AMD NBN S 21-100-1:2015 Subsector B02: STRUCTURES Subsector : B02 Registration Date : 2017-04-06 NEN Netherlands ID : 50002025/0001 91.080.01, 93.020 NPR 9998:2017 Concept nl Assessment of buildings in case of erection, reconstruction and disapproval - Basic rules for seismic actions: induced earthquakes NPR 9998 gives practical methods and calculation methods to improve the robustness against actions from earthquakes for buildings for the induced earthquakes in the province of Groningen. It can be used for construction, reconstruction and disapproval. The TS is based upon Eurocode 8 (EN 1998). Subsector B03: CONCRETE Subsector : B03 Registration Date : 2017-04-21 NBN Belgium ID : BE664040/0001 Draft for public enquiry 91.100.30 prnbn B 15-215 Testing hardened concrete - Absorption of water by immersion REV/AMD NBN B 15-215:1989 Subsector B04: CEMENT

Subsector : B04 Registration Date : 2017-04-11 ISRM Former Yugoslav Republic of Macedonia ID : 00058912/0001 91.100.10 HМКС1017:2017 Pozzolanic Materials Constituent for cement production Specification, criteria and conformity assessment Determination of compressive strength This standard establishes specifications for pozzolanic materials for use as an ingredient for cement, it defines, the requirements regarding the properties, the methods of testing and the procedures for conformity assessment of the pozzolanic materials. Page 7 Subsector B08: DOORS AND WINDOWS Subsector : B08 Registration Date : 2017-04-18 DIN Germany ID : 00517720/0001 00517720 Building hardware - Door handles, door plates and door roses - Concepts and definitions, dimensions, requirements Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : 2017-04-18 DIN Germany ID : 00517995/0001 00517995 Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions - Requirements and directions for design and construction Subsector B12: MASONRY Subsector : B12 Registration Date : 2017-04-21 NBN

Belgium ID : BE664032/0001 Draft for public enquiry 91.100.10 prnbn B 14-221 Test methods for mortars bond strength between masonry units and mortar cross shaped test Page 8 Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Subsector : B17 Registration Date : 2017-04-27 UNI Italy ID : 01603054/0001 17.180.20, 29.140.01, 91.010.30 UNI1603054 Light and lighting -Standard File Format for the electronic transfer of photometric and spectrometric data of luminaires and lamps. This standard specifies an XML based data format for the transfer of photometric, colorimetric, spectrometric and energy consumption data of luminaires, lamps and LED modules. Subsector B23: DISTRICT HEATING Subsector : B23 Registration Date : 2017-04-20 DIN Germany ID : 04111914/0001 04111914 District Heating System - Safety equipment of substations, house substations and consumers installations connected to hot-water district heating networks Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : 2017-04-06 NEN Netherlands ID : 50002024/0001

91.060.40, 91.140.30, 91.140.40 NPR 3378-45:2017 Concept nl Code of practice gas installations - Section flue systems - Part 45: Working on chimney systems and the evaluation of the consequences of changes to the existing ventilation and infiltration of the building - Guidelines to NEN 2757 and NEN 8757 This code of practice forms a guidance to the use of NEN 2757, NEN 2757-2 and NEN 8757. This code of practice gives determination methods for the smoke outlet in existings buildings. Page 9 Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027120/0001 93.080.20 ÖNORM B 3584-2 Bituminous mixtures - Material specifications - Stone Mastic Asphalt - Part 2: Performance based requirements - Rules for the implementation of ÖNORM EN 13108-5 This ÖNORM specifies selected requirements for stone mastic asphalt complying with ÖNORM EN 13108-5, ÖNORM EN 13108-20 and ÖNORM EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM specifies the implementation of the performance based approach defined in ÖNORM EN 13108-5 and shall be applied to asphalt layers exposed to high stresses (e.g. due to high traffic loads, temperature changes). Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027121/0001 93.080.20 ÖNORM B 3583 Bituminous mixtures - Material specifications - Hot Rolled Asphalt - Rules for the implementation of ÖNORM EN 13108-4 This ÖNORM specifies selected requirements Hot Rolled Asphalt complying with ÖNORM EN 13108-4, ÖNORM EN 13108-20 and ÖNORM EN EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined.

Page 10 Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027122/0001 93.080.20 ÖNORM B 3580-2 Bituminous mixtures - Material specifications - Asphalt Concrete - Part 2: Performance based requirements - Rules for the implementation of ÖNORM EN 13108-1 This ÖNORM specifies selected requirements asphalt concrete complying with ÖNORM EN 13108-1, ÖNORM EN 13108-20 and ÖNORM EN EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM specifies the implementation of the performance based approach defined in ÖNORM EN 13108-1 and shall be applied to asphalt layers exposed to high stresses (e.g. due to high traffic loads, temperature changes). Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027123/0001 93.080.20 ÖNORM B 3580-1 Bituminous mixtures - Material specifications - Asphalt Concrete - Part 1: Empirical approach - Rules for the implementation of ÖNORM EN 13108-1 This ÖNORM specifies selected requirements asphalt concrete complying with ÖNORM EN 13108-1, ÖNORM EN 13108-20 and ÖNORM EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM supports the implementation of the empirical approach defined in ÖNORM EN 13108-1. Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027124/0001 93.080.20 ÖNORM B 3581 Bituminous mixtures - Material specifications - Asphalt concrete for very thin layers - Rules for the implementation of ÖNORM EN 13108-2 This ÖNORM specifies selected requirements asphalt concrete for very thin layers complying

Page 11 with ÖNORM EN 13108-2, ÖNORM EN 13108-20 und ÖNORM EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027125/0001 93.080.20 ÖNORM B 3582 Bituminous mixtures - Material specifications - Soft Asphalt - Rules for the implementation of ÖNORM EN 13108-3 This ÖNORM specifies selected requirements soft asphalt complying with ÖNORM EN 13108-3, ÖNORM EN 13108-20 and ÖNORM EN EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027126/0001 93.080.20 ÖNORM B 3584-1 Bituminous mixtures - Material specifications - Stone mastic asphalt - Part 1: Empirical approach - Rules for the implementation of ÖNORM EN 13108-5 This ÖNORM specifies selected requirements Stone mastic asphalt complying with ÖNORM EN 13108-5, ÖNORM EN 13108-20 and ÖNORM EN EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027127/0001 93.080.20

Page 12 ÖNORM B 3585 Bituminous mixtures - Material specifications - Mastic asphalt - Rules for the implementation of ÖNORM EN 13108-6 This ÖNORM specifies selected requirements mastic asphalt complying with ÖNORM EN 13108-6, ÖNORM EN 13108-20 and ÖNORM EN EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027128/0001 93.080.20 ÖNORM B 3586-1 Bituminous mixtures - Material specifications - Porous asphalt (PA) - Part 1: Empirical Approach - Rules for the implementation of ÖNORM EN 13108-7 This ÖNORM specifies selected requirements Porous asphalt complying with ÖNORM EN 13108-7, ÖNORM EN 13108-20 and ÖNORM EN EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027129/0001 93.080.20 ÖNORM B 3586-2 Bituminous mixtures - Material specifications - Porous asphalt (PA) - Part 2: Performance based requirements - Rules for the implementation of ÖNORM EN 13108-7 This ÖNORM specifies selected requirements for porous asphalt complying with ÖNORM EN 13108-7, ÖNORM EN 13108-20 and ÖNORM EN 13108-21, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM specifies the implementation of the performance based approach defined in ÖNORM EN 13108-7 and shall be applied to asphalt layers exposed to high stresses (e.g. due to high traffic loads, temperature changes).

Page 13 Subsector : B26 Registration Date : 2017-04-21 ASI Austria ID : 00027130/0001 93.080.20 ÖNORM B 3587 Bituminous mixtures - Material specifications - Cold asphalt (CA) - Rules following ÖNORM EN 13108-7 This ÖNORM specifies selected requirements cold asphalt complying with ÖNORM B 3130, ÖNORM B 3507, ÖNORM B 3508, ÖNORM EN 13108-7 and ÖNORM EN 13108-20, based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : 2017-04-19 UNMZ Draft Issue Date : 2017-05-30 Czech Republic Latest Date for Comments : 2017-07-30 ID : 73002717/0001 Road building - Cationic bituminous emulsions The aim of the amendment Z1 is modification of tables 1 and 4. Use of new information in this area. REV/AMDAmendmentZ1ofČSN736132(2015) Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : 2017-04-24 SNV Draft Issue Date : 2017-04-20 Switzerland Latest Date for Comments : 2017-06-09 ID : CH170007/0001 Draft for public enquiry 91.100.50 prsia 281 Sealingsheets- Plasticsealingsheets, Bituminoussealingsheetsand sealing sheets produced from clay REV/AMD SIA 281:2013 Subsector B30: FLOOR AND SURFACING

Page 14 Subsector : B30 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-17 ID : P0043987/0003 Draft for public enquiry PNE 41901 EX Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method. Wet test. This standard describes a test method used in the laboratory or in situ to determine the value of the slip resistance of flooring surfaces for pedestrian transit using the pendulum frictiontest,bothinwetconditions. This standard is compatible with the test of the friction pendulum performed under wet conditions and with rubber shoe 57, described in Annex C of technical specification CEN / TS 16165. Subsector : B30 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-17 ID : P0047551/0001 Draft for public enquiry PNE 41902 EX Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method. Dry test. This standard describes a test method used in the laboratory or in situ to determine the value of the slip resistance of flooring surfaces for pedestrian transit using the pendulum frictiontest,bothindryconditions. This standard is compatible with the pendulum method of friction in dry conditions and is used 96 rubber slider; which is described in the annex C of the Technical Specification CEN/TS 16165. Subsector B99: UNDETERMINED Subsector : B99 Registration Date : 2017-04-20 DIN Germany ID : 00518008/0001 00518008 Placement of service conduits in public circulation areas - Guideline for planning

** End of Sector ** Page 15

Information procedure Page 16 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2017-05-08

Subsector C01: Food products Page 17 Subsector : C01 Registration Date : 2017-04-27 UNI Italy ID : 01603053/0001 67.200.10 UNI1603053 Extra virgin olive oil - Determination of hydroxytyrosol and tyrosol content in extra virgin olive oils This standard describes an analytical method for the quantification of total hydroxytyrosol and tyrosol in extra virgin olive oil. Subsector : C01 Registration Date : 2017-04-11 UNMZ Draft Issue Date : 2017-05-31 Czech Republic Latest Date for Comments : 2017-07-31 ID : 56000417/0001 67.190 Chocolate and chocolate confectionery - Determination of fat-free cocoa solids Standard specifies method for determination of fat-free cocoa solids in chocolate and chocolate products. It is applicable also for cocoa and cocoa based products. Method is based on determination of caffeine and theobromine by HPLC and calculation of fat-free cocoa solids using suitable factor. REV/AMD CSN 56 0578 (2000) Subsector : C01 Registration Date : 2017-04-11 UNMZ Draft Issue Date : 2017-05-31 Czech Republic Latest Date for Comments : 2017-07-31 ID : 57000117/0001 67.120.30 Testing methods for fish, fish products and canned fish. Determination of weight of content and weight part of ingredients. Standard specifies method for determination of weight of content, drained weight, drained washed weight and weight part of ingredients of fish products and products containing fish. Method of determination is based on weighting of whole product, its parts and/or ingredients. REV/AMD CSN 57 0146-3 (1982) Subsector : C01 Registration Date : 2017-04-26 BDS Draft Issue Date : 2017-05-09 Bulgaria Latest Date for Comments : 2017-07-09

ID : BG032005/0001 Draft for public enquiry 67.080.20 prбдс508 Tomato paste This standard refers to tomato products obtained by concentrating juice from pasted ripe red tomatoes without or with the addition of salt, filled in suitable packages, preserved by pasteurisation or sterilization with aseptic filling, intended for direct consumption or as semi-finished products for industrial and culinary purposes. Page 18 REV/AMDБДС508:1985 Subsector : C01 Registration Date : 2017-04-26 BDS Draft Issue Date : 2017-05-09 Bulgaria Latest Date for Comments : 2017-07-09 ID : BG032006/0001 Draft for public enquiry 67.160.20 prбдс8392 Vegetable juices This standard specifies requirements for vegetable juices obtained from fresh vegetables or semi-finished products, without or with the addition of salt, sugar, citric acid, ascorbic acid, packed in hermetically sealed containers, heat-preserved (by sterilization or pasteurisation). REV/AMDБДС8392:1976 Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : t0106021/0001 65.060.99 Olive elemination/seperation machine Olive elemination/seperation machine Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : t0106283/0001 67.220.10 Fruit Powder Fruit Powder

Page 19 Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : t0106334/0001 67.220.10 Tarhana Powder Tarhana Powder Subsector : C01 Registration Date : 2017-04-10 TSE Turkey ID : t1004681/0001 67.060 Corn Semolina This standard applies to corn semolina. Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : t1013413/0001 67.060 Sunflower seed flour- Edible This standard specifies the requirements for edible sunflower seed flour. It does not cover other sunflower products used as animal feed or for other purposes. Subsector : C01 Registration Date : 2017-04-10 TSE Turkey ID : t2011998/0001 67.080.20 Shaped Chips-Corn Chips This standard covers corn chips.

Page 20 Subsector : C01 Registration Date : 2017-04-10 TSE Turkey ID : t2011999/0001 67.080.20 Extruded Snack Food This standard covers the extruded snack food. Subsector : C01 Registration Date : 2017-04-10 TSE Turkey ID : t2012302/0001 67.200.10 Crude Sunflowerseed Oil This standard covers crude sunflowerseed oil which will be used as food product. after processing. Subsector : C01 Registration Date : 2017-04-10 TSE Turkey ID : t3007359/0001 67.120.10 Canned meat This standard covers canned meat Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : tst02812/0001 67.200.10 Margarine-Vegetable Origin This standard applies to vegetable origin margarine. It does not apply to margarine which is

Page 21 animal origin and minarine which is vegetable origin. Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : tst03862/0001 65.060.01 Machinary for agriculture and forestry - Tractors and machinary - Classification Machinary for agriculture and forestry - Tractors and machinary - Classification Subsector : C01 Registration Date : 2017-04-19 TSE Turkey ID : tst04017/0001 67.120.20 Hatching Eggs This standard applies to hatching eggs of hen Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : 2017-04-20 DIN Germany ID : 00200953/0001 00200953 Paints, varnishes and coatings - Corrosion protection of supporting thin-walled building components made of steel - Part 2: Surveillance and certification requirements Subsector C06: ESSENTIAL OILS Subsector : C06 Registration Date : 2017-04-17 UNE

Spain Latest Date for Comments : 2017-05-27 ID : P0047616/0001 Draft for public enquiry PNE 84695 Cosmetic raw materials. Sunscreens. Benzoic acid, 2-[4-(diethylamino)-2- hydroxybenzoyl]-hexylester. This standard defines the physico-chemical characteristics required to benzoic acid, 2-[-4- diethyllamino)-2-hydroxybenzoyl]-, hexylester for use in cosmetics REV/AMD UNE 84695:2006 Page 22 Subsector C11: TOBACCO Subsector : C11 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-17 ID : P0047887/0001 Draft for public enquiry PNE 118019 Tobacco and tobacco products. Determination of chloride content. Potentiometric method. This UNE standard specifies a potentiometric method for the determination of chloride content in tobacco products. REV/AMD UNE 118019:2011 Subsector C17: TREES AND PLANTS Subsector : C17 Registration Date : 2017-04-10 TSE Turkey ID : t0116138/0001 65.020.40 Ornamental plants Nomenclature This standard covers Turkish names, botanical names and abbreviations of ornamental plants in the plant production. Subsector : C17 Registration Date : 2017-04-10 TSE Turkey ID : t0116139/0001

65.020.40 Ornamental plants - Seedlings and saplings - Form, coding and dimensioning This standard covers the rules for the form, coding and dimensioning of ornamental plants before sale. Page 23 Subsector : C17 Registration Date : 2017-04-10 TSE Turkey ID : t0116140/0001 65.020.40 Ornamental plants Production Terms and definitions This standard covers terms and definitions related to ornamental plants in plant production. Subsector C19: CHEMICAL ANALYSIS Subsector : C19 Registration Date : 2017-04-19 TSE Turkey ID : t0114358/0001 71.060.50 Crude Sodium Borates for Industrial use -Determination of Total and Alkali -Soluble Calcium and Magnesium Contents- Flame Atomic Absorption Spectrofotometric Method This standard covers determination of total and alkali-soluble calcium and magnesium contents of crude sodium borates for industrial use by flame atomic absorption method Subsector : C19 Registration Date : 2017-04-19 TSE Turkey ID : t0114387/0001 71.060.50 Sodium Perborates For Industrial Use Determination of Rate of Solution Conductivity Method This standard covers determination of rate of solution in sodium perborates by conductivity method

Page 24 Subsector : C19 Registration Date : 2017-04-19 TSE Turkey ID : t0114391/0001 71.060.50 Crude sodium borates for industrial use - Determination of loss on ignition at 950 C This standard covers determination of loss on ignition at 950ºC in crude sodium borates for industrial use Subsector C20: EXPLOSIVES AND FIREWORKS Subsector : C20 Registration Date : 2017-04-19 TSE Turkey ID : t0116029/0001 95.020 Mine action - Explosive Ordnance Disposal (EOD) This standard provides specifications and guidelines for the safe conduct of Explosive Ordnance Disposal (EOD) operations as part of a mine action programme and applies to the disposal of mines and ERW, including unexploded sub-munitions. Subsector : C20 Registration Date : 2017-04-19 TSE Turkey ID : t0116030/0001 95.020 Mine action - Operational testing of mine detection dogs and handlers This standard provides specifications and guidelines for the external operational testing of Mine Detection Dogs (MDD) and their handlers required to work in areas where no earlier attempts have been made to clear the mines, either manually or by machine. Subsector C99: UNDETERMINED Subsector : C99 Registration Date : 2017-04-27

Page 25 UNI Italy ID : 01602335/0001 03.120.10, 27.010 UNI1602335 Energy audits for processes. Guidance. This technical report is a voluntary guidance to facilitate the comprehension and application of EN 16247-1 and 3 on energy audits for processes. It is a useful tool for the execution of energy audits for processes by detailing each step of the audit path defined by the diagram in Annex A of EN 16247-3. ** End of Sector **

Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2017-05-08

Subsector F06: TERMINOLOGY PRINCIPLES Page 27 Subsector : F06 Registration Date : 2017-04-21 ASI Austria ID : 00027114/0001 01.020, 35.240.30 ÖNORM A 2706 Technical requirements for terminology management software based on ISO 26162 This ÖNORM provides a list of technical requirements for terminology management software and is based on ISO 26162. It specifies quality and examination criteria for software, which serve as a basis for development and acquisition/purchasing. Subsector : F06 Registration Date : 2017-04-06 NEN Netherlands ID : 50002022/0001 03.020, 35.240.70 NTA 8023-1:2017 nl Social care - Information architecture within the youth sector - Part 1: Dutch youth referral index This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : F06 Registration Date : 2017-04-06 NEN Netherlands ID : 50002023/0001 03.020, 35.240.70 NTA 8023-2:2017 Concept nl Social care - Information architecture within the youth sector - Part 2: Electronic message exchange (EBV) This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : F06 Registration Date : 2017-04-28 BDS Bulgaria ID : BG028001/0001

17.020 prbds 17397-2 Metrology. Part 2: Vocabulary of terms in legal metrology This standard is based on International Vocabulary of Terms in Legal Metrology (VIML/ edition 2013). This vocabulary is intended to be used by metrologists as well as by other professionals involved in activities pertaining to legal metrology - from measurement and legal metrological control to the development of legislation. The vocabulary can also be a guide for governmental and intergovernmental organizations, trade associations, manufacturers of measurement tools and users of metrological services. Page 28 REV/AMDБДС17397-2:2002 Subsector F07: DOCUMENTATION AND INFORMATION Subsector : F07 Registration Date : 2017-04-06 NEN Netherlands ID : 50002021/0001 03.020, 35.240.70 NTA 8023-0:2017 nl Social care - Information architecture within the youth sector - Part 0: General specifications This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : 2017-04-18 DIN Germany ID : 06235145/0001 06235145 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 6: Rubble and buildings Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : 2017-04-19

Page 29 TSE Turkey ID : t0116028/0001 03.120.10, 11.020.01 Management system standard for Hygiene and Sanitation-Requirements This standard specifies the requirements of the management system for hygiene and sanitation. ** End of Sector **

Information procedure Page 30 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on : 2017-05-08

Subsector H04: SPORTS EQUIPMENT Page 31 Subsector : H04 Registration Date : 2017-04-21 ASI Austria ID : 00027115/0001 97.220.20 ÖNORM ISO 11088 Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system (ISO 11088:2015) This International Standard specifies a method for the installation, adjustment and testing of the Skibindungsmechanik, which are integrated in a practical manner the requirements of international standards for skis, boots and bindings. It is aimed at all individuals and institutions that deal with the above procedure. In particular, they aimed at the sports retail market. It applies to a functional unit ski-shoe-binding (SBS) for alpine skiing, is one of the at least one element of the user equipment. Subsector H23: LADDERS Subsector : H23 Registration Date : 2017-04-27 AFNOR France ID : 00202444/0001 PR NF E 85-013 Elements of industrial facilities - Permanent means of access - Choice of a means of access Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR) Subsector : H33 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-17 ID : P0047892/0001 Draft for public enquiry PNE 59231 Footwear. Determination of the rubbing resistance of leather and synthetic materials for shoe uppers using rubber This standard establishes a method for determining the friction resistance of leather and syntheticmaterials,usingarubberelement. The method intends to set test conditions similar to those given in the practical use of shoes subjected to high stress, for instance, in military footwear, hiking footwear and children's footwear, in which cases it is to be expected that friction will occur on the instep of one shoe and the sole of the other. The method is applicable to any type of leather and to synthetic

Page 32 materials intended for shoe uppers. REV/AMD UNE 59231:1997 ** End of Sector **

Information procedure Page 33 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector I : MECHANICAL ENGINEERING Register issued on : 2017-05-08

Subsector I02: FASTENERS Page 34 Subsector : I02 Registration Date : 2017-04-21 ASI Austria ID : 00027116/0001 21.060.01 ÖNORM M 1807-2 Countersinks for screws - Part 2: Diameters of counterbores for hexagon head screws and hexagon socket head screws - Manufacturing dimensions This ÖNORM specifies diameters of counterbores in construction parts for hexagon bolts, hexagon nuts and cylinder head screws with and without shims. Subsector : I02 Registration Date : 2017-04-27 AFNOR France ID : 00202432/0001 PR NF E 25-404 Square nuts - Symbole Q - Product grade C Subsector : I02 Registration Date : 2017-04-27 AFNOR France ID : 00202433/0001 PR NF E 25-118 Screws - Square head - Symbole Q Subsector : I02 Registration Date : 2017-04-27 AFNOR France ID : 00202434/0001 PR NF E 25-417 Prevailing torque hexagon regular nuts (with non-metallic insert) with conical spring tightening washer - Product grade A

Page 35 Subsector : I02 Registration Date : 2017-04-27 AFNOR France ID : 00202435/0001 PR NF E 25-416 Fasteners - Hexagon nuts with tightening plain washer - Product grade A Subsector : I02 Registration Date : 2017-04-27 AFNOR France ID : 00202436/0001 PR NF E 25-415 Hexagon nuts with conical spring tightening washer - Product grade A Subsector : I02 Registration Date : 2017-04-27 AFNOR France ID : 00202437/0001 PR NF E 25-122 Screws - Cross recedded mushroom head ("poeliers") - Product grade A - Symbole RL Z Subsector : I02 Registration Date : 2017-04-18 DIN Germany ID : 06702288/0001 06702288 Cross recessed pan head screws with collar - Product grade A Subsector I09: SMALL TOOLS Subsector : I09 Registration Date : 2017-04-27

Page 36 AFNOR France ID : 00202427/0001 PR NF E 63-142 Tools for pressing - Roller cams - General specifications Subsector : I09 Registration Date : 2017-04-27 AFNOR France ID : 00202428/0001 PR NF E 63-132 tools for pressing - Ring bolt - Dimensions Subsector : I09 Registration Date : 2017-04-27 AFNOR France ID : 00202429/0001 PR NF E 63-060 Tools for pressing - Wear plates - General specifications Subsector : I09 Registration Date : 2017-04-27 AFNOR France ID : 00202430/0001 PR NF E 63-113 Press tools - Rectangular retainers and percussion plates for flanged punches - Top fixing Subsector : I09 Registration Date : 2017-04-27 AFNOR France ID : 00202431/0001

PR NF E 63-114 Press tools - Square retainers and percussion plates for flanged punches - Top fixing Page 37 Subsector I12: PULLEYS & BELTS Subsector : I12 Registration Date : 2017-04-27 AFNOR France ID : 00202438/0001 PR NF T 47-004 Conveyor belts - Maximum values of the crown of the drums Subsector : I12 Registration Date : 2017-04-20 DIN Germany ID : 04500694/0001 04500694 Synchronous belt drives, metric pitch; synchronous belts Subsector : I12 Registration Date : 2017-04-20 DIN Germany ID : 04500695/0001 04500695 Synchronous belt drives, metric pitch; tooth space profile of synchronous pulleys Subsector I18: MINING Subsector : I18 Registration Date : 2017-04-18 DIN

Page 38 Germany ID : 04500700/0001 04500700 Elastomere scraper plates for belt conveyors in hard coal mines Subsector I19: NUCLEAR ENERGY Subsector : I19 Registration Date : 2017-04-21 ASI Austria ID : 00027117/0001 13.280, 13.340.10, 13.340.20 ÖNORM S 5213 X-ray protective devices for medical use of X-rays up to 300 kv This ÖNORM applies together with OVE EN 61331-3:2016-11 for X-ray protective devices for X-ray users as well as for patients. Subsector : I19 Registration Date : 2017-04-21 ASI Austria ID : 00027118/0001 13.100, 13.280 ÖNORM S 2607 Radioactive contamination testing of surfaces This ÖNORM contains rules for the determination of surface contamination with wipe or adhesive test as well as direct testing. Subsector : I19 Registration Date : 2017-04-18 DIN Germany ID : 06235102/0001 06235102 Construction of concrete hot cells - Part 1: Requirements for remotely operated cells, Supplement 4: Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation

Page 39 Subsector : I19 Registration Date : 2017-04-18 DIN Germany ID : 06235164/0001 06235164 Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials Subsector I28: FLUID POWER Subsector : I28 Registration Date : 2017-04-27 AFNOR France ID : 00202443/0001 PR NF E 49-066 Pneumatic fluid power - Directional control valve with three ports - mounting surfaces of subplate - Pipe thread Subsector I37: PRINTING AND PAPER MACHINES Subsector : I37 Registration Date : 2017-04-06 SNV Draft Issue Date : 2017-04-05 Switzerland Latest Date for Comments : 2017-06-30 ID : CH170006/0001 Draft for public enquiry 85.080.10 prsn 115000 Input control of printing paper after paper wetting index (PBI) Subsector I99: UNDETERMINED Subsector : I99 Registration Date : 2017-04-27 AFNOR

Page 40 France ID : 00202440/0001 PR XP E 68-004 Equipment for the manufacture of products made of composite materials - Moulding tools applied to the thermocompression, thermostamping processes - Specification ** End of Sector **

Information procedure Page 41 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector M : METALLIC MATERIALS Register issued on : 2017-05-08

Subsector M10: METALLIC COATINGS Page 42 Subsector : M10 Registration Date : 2017-04-18 DIN Germany ID : 06235149/0001 06235149 Black oxide coatings on ferrous metal components - Requirements and test methods Subsector M15: METALLIC CORROSION Subsector : M15 Registration Date : 2017-04-27 AFNOR France ID : 00202426/0001 PR NF A05-304 High strength steels for civil engineering works. Assessment of the embrittling effect of a medium by means of slow tensile testing ** End of Sector **

Information procedure Page 43 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector N : NON-METALLIC MATERIALS Register issued on : 2017-05-08

Subsector N03: PETROLEUM PRODUCTS Page 44 Subsector : N03 Registration Date : 2017-04-21 ASI Austria ID : 00027131/0001 75.160.20 ÖNORM C 1108 Liquid fuels - Residual fuels for heating purposes - Requirements The requirements and tests specified in this ÖNORM are applicable to the residual heating oils "fuel oil light", "fuel oil medium", "heavy fuel oil 1.0", "heavy fuel oil 2.5" and "heavy fuel oil SQ". Subsector : N03 Registration Date : 2017-04-19 TSE Turkey ID : t0116014/0001 75.160.20 Pyrolitic liquid fuel - Produced by pyrolysis of used tyres and plastics This standard specifies requirements and test methods for pyrolitic liqid fuel produced by pyrolysis of used tires and plastics. Subsector N04: REFRACTORIES Subsector : N04 Registration Date : 2017-04-10 TSE Turkey ID : t0114390/0001 81.080 Magnesite and dolomite based refractories-determination of boron content-titrimetric method This standard covers determination of boron content of magnesite and dolomite based refractories by titrimetric method Subsector N06: RUBBER Subsector : N06 Registration Date : 2017-04-20 DIN

Page 45 Germany ID : 04500696/0001 04500696 Sheets of elastomers for waterproofing; terms of delivery Subsector N09: PLASTICS Subsector : N09 Registration Date : 2017-04-18 DIN Germany ID : 05401922/0001 05401922 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English Subsector N10: CORK Subsector : N10 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-27 ID : P0047890/0001 Draft for public enquiry PNE 56930 Cork stoppers. Determination of releasable 2,4,6-trichloroanisol (TCA) relargable This method intends to simulate mmigration phenomena that may occur when cork stoppers areusedtoclosewinebottles. It consists of determining the releasable 2,4,6-trichloroanisol (TCA) based on an equilibrium between the solid (cork) and the liquid (hydro-alcoholic simulator) matrices, After submitting a sample of cork stoppers to a period of maceration in a hydro-alcoholic solution. This standard is applicable to all types of cork stoppers. Subsector N13: LEATHER Subsector : N13 Registration Date : 2017-04-17 UNE

Page 46 Spain Latest Date for Comments : 2017-05-17 ID : P0047891/0001 Draft for public enquiry PNE 59020 Leather. Sole leather specifications. This standard aims at establishing the features that leather for soles must have so that it can be considered quality leather. REV/AMD UNE 59020:1988 ** End of Sector **

Information procedure Page 47 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on : 2017-05-08

Subsector S08: AIR QUALITY Page 48 Subsector : S08 Registration Date : 2017-04-27 UNI Italy ID : 01603000/0001 13.040.40 UNI1603000 Emissions measurement - Determination of silica in conveyed gas flows - X-ray diffraction method This Standard describes a method for sampling air in ducts on filtering membranes and analysis of the dust collected by X-Ray diffraction to determine the content of quartz and cristobalite (free crystalline silica) in the sample. The method is applicable for silica content of about 0.02 micrograms per square millimeter of dust surface. Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : 2017-04-20 DIN Germany ID : 11904234/0001 11904234 UV devices for water treatment - Part 1: Low pressure UV devices Subsector : S09 Registration Date : 2017-04-10 TSE Turkey ID : tst12468/0001 45.080 Technical spesification for the supply of ring-shaped elastomer joints for brake coupling heads This specification governs the supply of ring-shaped elastomer joints for brake coupling heads. Subsector S24: SOIL QUALITY Subsector : S24 Registration Date : 2017-04-06 NEN

Netherlands ID : 50002026/0001 13.080.05 NEN 5720:2017 Concept nl Soil quality - Sediments - Strategy for exploratory survey - Investigation of the environmental quality of sediments This standard can be used for the investigation of suspected and not suspected locations. Page 49 Subsector S26: ENVIRONMENTAL MANAGEMENT Subsector : S26 Registration Date : 2017-04-27 AFNOR France ID : 00202973/0001 NF X30-205 Environmental management system - Guide for the implementation by steps of an environmental management system Subsector S99: UNDETERMINED Subsector : S99 (Secondary Subsector) Registration Date : 2017-04-06 NEN Netherlands ID : 50002021/0001 03.020, 35.240.70 NTA 8023-0:2017 nl Social care - Information architecture within the youth sector - Part 0: General specifications This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : S99 (Secondary Subsector) NEN Netherlands ID : 50002022/0001 Registration Date : 2017-04-06

Page 50 03.020, 35.240.70 NTA 8023-1:2017 nl Social care - Information architecture within the youth sector - Part 1: Dutch youth referral index This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : S99 (Secondary Subsector) Registration Date : 2017-04-06 NEN Netherlands ID : 50002023/0001 03.020, 35.240.70 NTA 8023-2:2017 Concept nl Social care - Information architecture within the youth sector - Part 2: Electronic message exchange (EBV) This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. ** End of Sector **

Information procedure Page 51 Monthly Notifications Register Notifications registered at CCMC from 2017-04-01 to 2017-04-30 Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on : 2017-05-08

Subsector T02: AEROSPACE Page 52 Subsector : T02 Registration Date : 2017-04-27 AFNOR France ID : 00203063/0001 NF L17-250 Aerospace series - Silicone rubbers - Class 50 D - Characteristics Subsector : T02 Registration Date : 2017-04-27 AFNOR France ID : 00203064/0001 NF L17-121 Aerospace series - Butadiene - Acrylonitrile rubbers - Class 21 - Characteritics Subsector : T02 Registration Date : 2017-04-27 AFNOR France ID : 00203065/0001 NF L 17-168 Aerospace series NF L standardized rubber materials Technical specification Subsector : T02 Registration Date : 2017-04-27 AFNOR France ID : 00203066/0001 NF L17-106 Aerospace series NF L standardized rubber materials Technical specification Subsector : T02 Registration Date : 2017-04-27 AFNOR

Page 53 France ID : 00203067/0001 NF L17-163 Aerospace industry - Fluorosilicone rubbers - Class 63 - Characteristics Subsector : T02 Registration Date : 2017-04-18 DIN Germany ID : 13115880/0001 13115880 Aerospace series - Screws in material 1.4534 - Nominal tensile strength 1220 MPa, 1400 MPa und 1550 MPa up to 315 C - Technical specifications Subsector : T02 Registration Date : 2017-04-18 DIN Germany ID : 13115884/0001 13115884 Aerospace - Nuts, hexagon, slotted/castellated with MJ thread, self-locking, corrosionresisting steel, classification: 1100 MPa/120 C; Inactive for new design Subsector T03: ROAD VEHICLES Subsector : T03 Registration Date : 2017-04-21 ASI Austria ID : 00027119/0001 13.180, 43.040.15, 43.040.30 ÖNORM V 5090 Road vehicles - Testing procedure of visual driver distraction by interaction with transport information and control systems (TICS) inside the vehicle This ÖNORM provides a testing procedure to measure and evaluate visual driver distraction of a driver from the driving task when interacting with transport information and control systems (TICS) inside the vehicle. The ÖNORM refers tot he interaction od a driver with functions of a TICS while driving on a test track. Moreover, the ÖNORM provides threshold

Page 54 values, which have to be complied by the TICS in order to fulfill the requirements of this ÖNORM. The testing procedure is applicable for vehicles classified M1 and N1 (according to 3, KFG 1967). Subsector T19: ROAD SAFETY Subsector : T19 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-27 ID : P0033275/0003 Draft for public enquiry PNE 199072-1 Road traffic management equipment. Air monitoring stations on roads. Part 1: Functional characteristics. This standard defines function requirements to be fulfilled by environmental parameters analyser systems, within Environmental Stations on Roads. These stations will be installed on roads for monitoring environmental quality information in order to assess road traffic effects on it. Subsector : T19 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-27 ID : P0033276/0003 Draft for public enquiry PNE 199072-2 Road traffic management equipment. Air monitoring stations on roads. Part 2: Application protocol This standard describes the Communications Protocol employed between URS (Universal Remote Station) and Environmental Stations on Roads (ESR; EMAC in Spanish). This description covers from physical level to application level. ESR are considered to be URS periphery Subsector : T19 Registration Date : 2017-04-17 UNE Spain Latest Date for Comments : 2017-05-27 ID : P0033277/0003 Draft for public enquiry PNE 199072-3 Road traffic management equipment. Air monitoring stations on roads. Part 3: Equipment This standard defines units and principles of measure, power supply and consumption,

technical characteristics, scope, installation conditions and connections of environmental parameters analyser systems to be placed on roads for monitoring environmental quality information in order to assess road traffic effects on it Page 55 Subsector T20: TRAM- AND RAILWAY ENGINEERING Subsector : T20 Registration Date : 2017-04-27 AFNOR France ID : 00202970/0001 NF F31-446 Rolling stock - Composite panels with decorated or protected faces Subsector : T20 Registration Date : 2017-04-27 AFNOR France ID : 00202971/0001 NF F31-812 Matériel roulant ferroviaire - Revêtements de sol en caoutchouc Subsector : T20 Registration Date : 2017-04-27 UNI Italy ID : 01602957/0001 03.220.30, 43.150 UNI1602957 Railway cycles- Technical and construction requirements This standard defines the technical and constructive requirements related to "ferrocicli" railway cycles moved by muscular propulsion eventually integrated by electric assistance, authorized to travel on the railway infrastructures which are not used anymore for public transportation. The railway cycles can move individually or in convoy formation and are used for the carriage of persons, even with reduced mobility, the transportation of luggage and/or cargo or other specific uses.

** End of Sector ** Page 56

List of non-electrotechnical subsectors 2011-06 Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete 71 104; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures 165 124 B11 Metal structures 167 135 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134 B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 401 C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C22 Bio-Based products / 411 C99 Undetermined / 386

Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74 I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics 61 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS ;377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150; 324 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2017 Issued on : 8 May 2017

Page 1 Information Procedure on Standards Notifications registered at CCMC during April 2017 Sector U : GENERAL ELECTROTECHNICAL STANDARDS Register issued on : 8 May 2017

Subsector U01: INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS Page 2 Subsector : U01 Registration Date : 2017-04-18 DIN Germany ID : 09500490/0001 09500490 Identification of pipelines according to the fluid conveyed Subsector : U01 Registration Date : 2017-04-18 DIN Germany ID : 09500490/0001 09500490 Identification of pipelines according to the fluid conveyed Subsector U08: ELECTRIC WELDING Subsector : U08 Registration Date : 2017-04-27 AFNOR France ID : 00202441/0001 PR NF A 82-042 Resistance welding - Transformers to be embarked on a robot - Particular specifications Subsector : U08 Registration Date : 2017-04-27 AFNOR France ID : 00202441/0001 PR NF A 82-042 Resistance welding - Transformers to be embarked on a robot - Particular specifications

Subsector U12: RELIABILITY Page 3 Subsector : U12 Registration Date : 2017-04-27 AFNOR France ID : 00202517/0001 PR XP C20-350 Collecte et Exploitation du Retour d Expérience en Sûreté de Fonctionnement des équipements et équipements Subsector : U12 Registration Date : 2017-04-27 AFNOR France ID : 00202517/0001 PR XP C20-350 Collecte et Exploitation du Retour d Expérience en Sûreté de Fonctionnement des équipements et équipements Subsector U99: UNDETERMINED Subsector : U99 Registration Date : 2017-04-18 DIN Germany ID : 14900215/0001 14900215 Entertainment technology - Fastening points and fixtures for devices Subsector : U99 Registration Date : 2017-04-18 DIN Germany ID : 14900215/0001 14900215 Entertainment technology - Fastening points and fixtures for devices

Page 4 ** End of Sector **

Page 5 Information Procedure on Standards Notifications registered at CCMC during April 2017 Sector V : ELECTRONIC ENGINEERING Register issued on : 8 May 2017

Subsector V02: ELECTRICAL MEASURING EQUIPMENT Page 6 Subsector : V02 Registration Date : 2017-04-18 DIN Germany ID : 02227515/0001 02227515 Electronic plug-in electricity meters (ehz) ** End of Sector **

Page 7 Information Procedure on Standards Notifications registered at CCMC during April 2017 Sector W : ELECTRICAL ENGINEERING Register issued on : 8 May 2017