SVESK STADARD SS-E ISO 28927-5:2009/A1:2015 Fastställd/Approved: 2015-09-13 Publicerad/Published: 2015-09-29 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 13.160; 14.080; 25.140.10 Handhållna motordrivna maskiner Testmetoder för vibrationsemmission Del 5: Borrmaskiner och slagborrmaskiner (ISO 28927-5:2009/Amd 1:2015) Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
Provläsningsexemplar / Preview Europastandarden E ISO 28927-5:2009/A1:2015 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av E ISO 28927-5:2009/A1:2015. The European Standard E ISO 28927-5:2009/A1:2015 has the status of a Swedish Standard. This document contains the official English version of E ISO 28927-5:2009/A1:2015. Copyright/Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen regleras av slutanvändarlicensen för denna produkt. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon 08-555 520 00. Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone +46 8 555 520 00. Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Standarden är framtagen av kommittén för Vibrationer i handhållna maskiner, SIS/TK 109. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på www.sis.se - där hittar du mer information.
EUROPEA STADARD ORME EUROPÉEE EUROPÄISCHE ORM Provläsningsexemplar / Preview E ISO 28927-5:2009/A1 September 2015 ICS 13.160; 25.140.10 English Version Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015) Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 5: Perceuses et perceuses à percussion (ISO 28927-5:2009/Amd 1:2015) Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 5: Bohrmaschinen und Schlagbohrmaschinen (ISO 28927-5:2009/Amd 1:2015) This amendment A1 modifies the European Standard E ISO 28927-5:2009; it was approved by CE on 6 June 2015. CE members are bound to comply with the CE/CEELEC Internal Regulations which stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE-CEELEC Management Centre or to any CE member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE member into its own language and notified to the CE-CEELEC Management Centre has the same status as the official versions. CE members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, etherlands, orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEA COMMITTEE FOR STADARDIZATIO COMITÉ EUROPÉE DE ORMALISATIO EUROPÄISCHES KOMITEE FÜR ORMUG CE-CEELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CE All rights of exploitation in any form and by any means reserved worldwide for CE national Members. Ref. o. E ISO 28927-5:2009/A1:2015 E
Provläsningsexemplar / Preview SS-E ISO 28927-5:2009/A1:2015 (E) European foreword This document (E ISO 28927-5:2009/A1:2015) has been prepared by Technical Committee ISO/TC 118 "Compressors and pneumatic tools, machines and equipment" in collaboration with Technical Committee CE/TC 231 Mechanical vibration and shock the secretariat of which is held by DI. This Amendment to the European Standard E ISO 28927-5:2009 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CE [and/or CEELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CE by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). According to the CE-CEELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, etherlands, orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 28927-5:2009/Amd 1:2015 has been approved by CE as E ISO 28927-5:2009/A1:2015 without any modification.
Provläsningsexemplar / Preview SS-E ISO 28927-5:2009/A1:2015 (E) Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills AMEDMET 1: Feed force Page 13, Table 1 Replace Table 1 with the following. Table 1 Drills without impact action Drill diameter and feed force by free running speed Rotational speed r/min Drill diameter mm Pistol grip drills Feed force Acceptable variation Straight and angle drills Feed force Acceptable variation 5 500 10 000 1,5 50 ±10 50 ±10 3 100 5 499 3 100 ±15 50 ±15 1 000 3 099 6 150 ±30 50 ±15 < 1 000 10 200 ±30 50 ±15 1
Anteckningar/otes Provläsningsexemplar / Preview