Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 203/2015 Απ. 4877, 12.6.2015 Απιθμόρ 203 1437 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηνπνίεζε βάζεη ηνπ άξζξνπ 5 ηνπ βαζηθνύ Νόκνπ 156(Η) ηνπ 2002 θαη ηνπ άξζξνπ 6 ηνπ Σξνπνπνηεηηθνύ Νόκνπ 57(Η) ηνπ 2011 Με ην παξόλ γλωζηνπνηείηαη όηη βάζεη ηωλ Άξζξωλ 5 ηνπ βαζηθνύ Νόκνπ 156(Η) ηνπ 2002 θαη 6 ηνπ ηξνπνπνηεηηθνύ Νόκνπ 57(Η)/2011 πνπ ξπζκίδνπλ ηηο δξαζηεξηόηεηεο ηεο Σππνπνίεζεο, Γηαπίζηεπζεο θαη Σερληθήο Πιεξνθόξεζεο, ν Κππξηαθόο Οξγαληζκόο Σππνπνίεζεο (CYS) δεκνζηεύεη ωο Κππξηαθά πξόηππα ηα πην θάηω Δπξωπαϊθά πξόηππα: STANDARDS FROM EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) 11 HEALTH CARE TECHNOLOGY 52:2010 45502-1:2015 10:2008 11:2015 12:2015 6:2010/ A1:2015 10:2015 11:2015 17:2015 24:2015 26:2015 Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds (IEC 52:2009) Implants for surgery - Active implantable medical devices Part 1: General requirements for safety, marking and for information to be provided by the manufacturer Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers (IEC 10:2007/A1:2013) Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment (IEC 11:2015) Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment (IEC 12:2014) Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability (IEC 6:2010/A1:2013) Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 10:2012) Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment (IEC 11:2013) Medical electrical equipment - Part 2-17: Particular requirements for the basic safety and essential performance of automaticallycontrolled brachytherapy afterloading equipment (IEC 17:2013) Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers (IEC 24:2012) Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs (IEC 26:2012) 11.140.01.20.55 EN 45502-1:1997 1-11:2010 2-10:2000 2-11:1997 2-17:2004 2-24:1998 2-26:2003
33:2010 36:2015 3:2015 47:2015 62:2015 6:2015 60627:2015 62366:2008 62570:2015 80601-2- 30:2010 80601-2- 60:2015 41:2009 54:2009 63:2015 64:2015 68:2015 80601-2- 58:2015 1438 Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis (IEC 33:2010/A1:2013) Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy (IEC 36:2014) Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment (IEC 3:2012) Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems (IEC 47:2012) Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment (IEC 62:2013) Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment (IEC 6:2012).55.01.55.01 Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids (IEC 60627:2013).50 Medical devices - Application of usability engineering to medical devices (IEC 62366:2007/A1:2014) Standard practice for marking medical devices and other items for safety in the magnetic resonance environment (IEC 62570:2014) Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers (IEC 80601-2-30:2009/A1:2013) Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment (IEC 80601-2-60:2012) Medical electrical equipment - Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis (IEC 41:2009/A1:2013) Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (IEC 54:2009) Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment (IEC 63:2012) Medical electrical equipment - Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment (IEC 64:2014) Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment (IEC 68:2014) Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (IEC 80601-2-58:2014).50.01.20.50.50.70 2-36:1997 2-3:1993 2-47:2001 EN 60627:2001 EN 80601-2-58:2009
1439 13 ENVIRONMENT. HEALTH PROTECTION. SAFETY CYS CEN/CLC/TR 16832:2015 50625-2- 2:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) Collection, logistics & Treatment requirements for WEEE Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays 13.340.01 13.030.99 17 METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA 60404-5:2015 Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties (IEC 60404-5:2015) 17.220.20 S/S 60404-5:2007 19 TESTING 60068-2- 58:2015 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:2015) 19.040 S/S 60068-2-58: 2004 25 MANUFACTURING ENGINEERING 62135-2:2015 62714-2:2015 62541-100:2015 62541-13:2015 62541-7:2015 62541-8:2015 62541-9:2015 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62135-2:2015) Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 2: Role class libraries (IEC 62714-2:2015) OPC unified architecture - Part 100: Device Interface (IEC 62541-100:2015) OPC unified architecture - Part 13: Aggregates (IEC 62541-13:2015) OPC unified architecture - Part 7: Profiles (IEC 62541-7:2015) OPC unified architecture - Part 8: Data Access (IEC 62541-8:2015) OPC unified architecture - Part 9: Alarms and conditions (IEC 62541-9:2015) 25.160 EN 62135-2:2008 7:2012 8:2011 9:2012
1440 60519-1:2015 62657-2:2015 62541-3:2015 62541-5:2015 62541-6:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements (IEC 60519-1:2015) Industrial communication networks - Wireless communication networks - Part 2: Coexistence management (IEC 62657-2:2013, modified) OPC unified architecture - Part 3: Address Space Model (IEC 62541-3:2015) OPC unified architecture - Part 5: Information Model (IEC 62541-5:2015) OPC unified architecture - Part 6: Mappings (IEC 62541-6:2015) 25.180.10 EN 60519-1:2011 3:2010 5:2011 6:2011 29 ELECTRICAL ENGINEERING 62271-3:2015 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 (IEC 62271-3:2015) 29.130.10 EN 62271-3:2006 50223:2015 60079-29- 2:2015 60079-19:2011 60968:2015 60061-1:1993 /A51:2015 60061-2:1993 /A48:2015 60061-3:1993 /A49:2015 62493:2015 61347-1:2015 CYS CLC/TS 50238-2:2015 60885-3:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (IEC 60079-29-2:2015) Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation (IEC 60079-19:2010) Self-ballasted fluorescent lamps for general lighting services Safety requirements (IEC 60968:2015, modified + COR1:2015, modified) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps (IEC 60061-1:1969/A51:2014) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/A48:2014) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/A49:2014) Assessment of lighting equipment related to human exposure to electromagnetic Field (IEC 62493:2015) Lamp controlgear - Part 1: General and safety requirements (IEC 61347-1:2015) 29.260.20 29.260.20 29.260.20 29.140.30 29.140.10 29.140.10 29.140.10 29.020 29.140.99 Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits 29.280 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:2015) 29.060.20 EN 50223: 2010 EN 60079-29-2:2007 EN 60968:2013 EN 62493: 2010 EN 61347-1:2008 CLC/TS 50238-2: 2010 EN 60885-3:2003
1441 62811:2015 50438:2013 /IS1:2015 50438:2007 /IS1:2015 60404-8- 1:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation (IEC 62811:2015) 29.140.99 Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks 29.160.20 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks 29.160.20 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials (IEC 60404-8-1:2015) 29.030 31 ELECTRONICS 60115-1:2011 /A11:2015 61837-4:2015 60384-8:2015 60384-9:2015 60063:2015 60115-8- 1:2015 Fixed resistors for use in electronic equipment - Part 1: Generic specification Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections Part 4: Hybrid enclosure outlines (IEC 61837-4:2015) Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 (IEC 60384-8:2015) Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 (IEC 60384-9:2015) Preferred number series for resistors and capacitors (IEC 60063:2015) Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G (IEC 60115-8-1:2014, modified) 31.040.10 31.140 31.060.20 31.060.20 31.040 31.040.10 S/S EN 61837-4: 2004 EN 60384-8:2005 EN 60384-9:2005 33 TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING 55015:2013 61000-6- 7:2015 60940:2015 60793-1- 43:2015 62106:2015 62634:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:2013) Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations (IEC 61000-6-7:2014) Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression (IEC 60940:2015) Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement (IEC 60793-1-43:2015) Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz (IEC 62106:2015) Radio data system (RDS) - Receiver products and characteristics - Methods of Measurement (IEC 62634:2015) 33.100.10 33.100.20 33.100 33.180.10 33.160.40 33.060.20 EN 60793-1-43:2002 EN 62106: 2009 EN 62634: 2011
1442 60794-1- 21:2015 61169-51:2015 62810:2015 62875:2015 61970-452:2015 Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods (IEC 60794-1-21:2015) Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 O (type QLI) (IEC 61169-51:2015) Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods (IEC 62810:2015) Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture map for auditory presentation of printed texts (IEC 62875:2015) Energy management system application program interface (EMS-API) - Part 452: CIM model exchange specification (IEC 61970-452:2015) 33.180.10 33.120.30 33.120.30 33.160 33.200 EN 60794-1-2:2003 (partially) EN 61970-452:2013 35 INFORMATION TECHNOLOGY. OFFICE MACHINES 62541-11:2015 62541-4:2015 OPC unified architecture - Part 11: Historical Access (IEC 62541-11:2015) OPC unified architecture - Part 4: Services (IEC 62541-4:2015) 35.100 35.100 4:2011 ΣΡΟΠΟΠΟΙΗΔΙ / CORRIGENDA 62368-1:2014 /AC:2015 Audio/video, information and communication technology equipment - Part 1: Safety requirements