Newstar Locks Nightlatch Range DIN Range Standard & Escape London Fire Brigade Range BS Range NEWSTAR form and function for life
DIN Escape lock range Split follower escape sash lock ESL1 60 1. Lever handle withdraws latch and dead bolt. 2. Latch bolt is reversible for opening in or out. 3. Split follower function is handed. 4. Cylinder double throws dead bolt to 22mm. 5. Cylinder withdraws latch. 6. 60mm backset. 72mm centers. 7. Strike includes dust caps in white. 8. Radius or square forend available. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 3 7 6 1 1 3 4 2 A BS EN 179:1998 & A1:2001 BS 1634-1 2000 & BS 476 Part 22. 60 minutes Dimensional Requirements DIN 18251 Additional requirements Split follower spindle Ref: NS.SS Tested lever handle available. AG-006 13mm & 25mm rebates available. Intumescent pack available. BS EN 179 - Emergency exit devices This standard covers devices to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is most unlikely to develop. Lever handle operated escape mortice locks or push pads may therefore be used. Note: When using a cylinder and turn, if the cam is not fully turned then the lock may jam. We recommend a double cylinder is used with this lock. L01
DIN Escape lock range Dead lock case EDL1 60 1. Lever handle withdraws dead bolt. 2. Cylinder double throws dead bolt to 22mm. 3. 60mm backset. 72mm centers. 4. Strike includes dust caps in white. 5. Radius or square forend available. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 3 6 6 1 1 3 4 2 A BS EN 179:1998 & A1:2001 BS 1634-1 2000 & BS 476 Part 22 Dimensional Requirements DIN 18251 Note: We do not recommend you use cylinder and turns with this lock case. Additional requirements Tested lever handle available. AG-006 13mm & 25mm rebates available. Intumescent pack available BS EN 179 - Emergency exit devices This standard covers devices to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is most unlikely to develop. Lever handle operated escape mortice locks or push pads may therefore be used. L02
DIN Standard lock range Split follower classroom lock case SFCL1 60 1. Lever handle withdraws latch bolt, one side fixed dead opposite side. 2. Latch bolt is reversible. 3. Split follower reversible. 4. Cylinder withdraws latch. 5. 60mm backset. 72mm centers. 6. Strike includes dust caps in white. 7. Radius or square forend available Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 2 W 8 1 0 F - B A 2 0 BS 1634-1 2000 & BS 476 Part 22 60 minutes Dimensional Requirements Meets the dimensional requirements of BS 8300 DIN 18251 Additional requirements Split follower spindle Ref: NS.SS 13mm & 25mm rebates available. Intumescent pack available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L03
DIN Standard lock range Sash lock case SL1 60 1. Lever handle withdraws latch bolt. 2. Latch bolt is reversible. 3. Cylinder double throws dead bolt to 22mm. 4. Cylinder withdraws latch. 5. 60mm backset. 72mm centers. 6. Strike includes dust caps in white. 7. Radius or square forend available Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 2 X 8 1 0 F 2 B C 2 0 BS EN 12209:2003 BS 1634-1 2000 & BS 476 Part 22 60 Minutes Dimensional Requirements Meets the dimensional requirements of BS 8300 DIN 18251 Additional requirements 13mm & 25mm rebates available. Intumescent pack available BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/ smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L04
DIN Standard lock range Dead lock case DL1 60 1. Cylinder double throws dead bolt to 22mm 2. 60mm backset. 3. Strike includes dust caps in white. 4. Radius or square forend available. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 3 X 8 1 0 F 2 B C 0 0 BS 1634-1 2000 & BS 476 Part 22 60 minutes Dimensional Requirements DIN 18251 Additional requirements 13mm & 25mm rebates available. Intumescent pack available BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L05
DIN Standard lock range Bath lock BL1 60 1. Lever handle withdraws latch bolt. 2. Latch bolt is reversible. 3. Thumb turn throws single turn dead bolt 11mm 4. 60mm backset. 78mm centers. 5mm follower. 5. Strike includes dust caps in white. 6. Radius or square forend available. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 2 X 8 1 0 F - B G 2 0 BS 1634-1 2000 & BS 476 Part 22 60 minutes Dimensional Requirements Meets the dimensional requirements of BS 8300 DIN 18251 Additional requirements 13mm & 25mm rebates available. Intumescent pack available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L06
DIN Standard lock range Latch and night latch duel purpose case LL1 & NL1 60 1. Lever handle withdraws latch bolt. 2. Latch bolt is reversible. 3. Cylinder withdraws latch. 4. 60mm backset. 72mm centers. 5. Strike includes dust caps in white. 6. Radius or square forend available. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 2 X 8 1 0 F - B 0 2 0 BS 1634-1 2000 & BS 476 Part 22 60 minutes Dimensional Requirements Meets the dimensional requirements of BS 8300 DIN 18251 Additional requirements 13mm & 25mm rebates available. Intumescent pack available BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L07
DIN Standard lock range Night latch c/w anti thrust bolt NL1.AT 60 1. Lever handle withdraws bolt. 2. Cylinder withdraws latch bolt. 3. Anti thrust bolt locks latch. 4. 60mm backset. 72mm centers. 5. Strike includes dust caps in white. 6. Radius or square forend available. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 3 F 8 1 0 F - B B 2 0 BS 1634-1 2000 & BS476 Part 22 60 minutes Dimensional Requirements Meets the dimensional requirements of BS 8300 DIN 18251 Additional requirements 13mm & 25mm rebates available. Intumescent pack available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L08
UK Standard lock range 5 lever sash lock BSSL BS EN3621:2007 60 SCP PB 1. Lever Handle withdraws bolt. 2. Key withdraws dead bolt. 3. Reversible Latch bolt 4. 1500 Differs 5. Case 64mm or 76mm Classification confirmed BS EN 12209:2003 2 X 5 0 0 F 7 K D 2 B BS 1634-1 2000 Additional requirements 13mm & 25mm rebates available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. Code Case Backset Centres Dead Bolt Forend Dimensions Projection Dimensions BSSL 64x108x19mm 44.5mm 57mm 20mm 25x156x4.7mm 64mm BSSL 76x108x19mm 57mm 57mm 20mm 25x156x4.7mm 76mm L09
UK Standard lock range 5 lever dead lock BSDL BS EN3621:2007 60 SCP PB 1. Key withdraws dead bolt. 2. 1500 Differs 3. Case 64mm or 76mm Classification confirmed BS EN 12209:2003 2 X 5 0 0 F 7 K D 0 B BS 1634-1 2000 Additional requirements 13mm & 25mm rebates available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. Code Case Backset Centres Dead Bolt Forend Dimensions Projection Dimensions BSDL 64x80x19mm 44.5mm n/a 20mm 25x127x4.7mm 64mm BSDL 76x80x19mm 57mm n/a 20mm 25x127x4.7mm 76mm L10
UK Standard lock range Cylinder & turn sash lock BSSCT BS EN8621:2007 60 SCP PB 1. Lever Handle withdraws bolt. 2. Key withdraws dead bolt. 3. Reversible Latch bolt 4. 30,000 Differs 5. Case 64mm or 76mm 6. Security escutcheons included. Classification confirmed BS EN 12209:2003 2 X 5 0 0 F 7 K A 2 0 BS 1634-1 2000 Cylinder BS EN 1303:2005 Additional requirements 13mm & 25mm rebates available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. Code Case Backset Centres Dead Bolt Forend Dimensions Projection Dimensions BSSCT 64x108x19mm 44.5mm 47.5mm 20mm 25x156x4.7mm 64mm BSSCT 76x108x19mm 57mm 47.5mm 20mm 25x156x4.7mm 76mm L11
UK Standard lock range Cylinder & turn dead lock BSDCT 60 BS EN8621:2007 SCP PB 1. Key or Turn withdraws dead bolt. 2. 30,000 Differs 3. Case 64mm or 76mm 4. Security escutcheons included. Classification confirmed BS EN 12209:2003 2 X 5 0 0 F 7 B A 0 0 BS 1634-1 2000 Cylinder BS EN 1303:2005 Additional requirements 13mm & 25mm rebates available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. Code Case Backset Centres Dead Bolt Forend Dimensions Projection Dimensions BSDCT 64x80x19mm 44.5mm n/a 20mm 25x127x4.7mm 64mm BSDCT 76x80x19mm 57mm n/a 20mm 25x127x4.7mm 76mm L12
UK Standard lock range Cylinder sash lock BSSC BS EN3621:2007 60 SCP PB 1. Lever Handle withdraws bolt. 2. Key withdraws dead bolt. 3. Reversible Latch bolt 4. 30,000 Differs 5. Case 64mm or 76mm 6. Security escutcheons included. Classification confirmed BS EN 12209:2003 2 X 5 0 0 F 7 K A 2 0 BS 1634-1 2000 Cylinder BS EN 1303:2005 Additional requirements 13mm & 25mm rebates available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. Code Case Backset Centres Dead Bolt Forend Dimensions Projection Dimensions BSSC 64x108x19mm 44.5mm 47.5mm 20mm 25x156x4.7mm 64mm BSSC 76x108x19mm 57mm 47.5mm 20mm 25x156x4.7mm 76mm L13
UK Standard lock range Cylinder dead lock BSDC BS EN3621:2007 60 SCP PB 1. Key withdraws dead bolt. 2. 30,000 Differs 3. Case 64mm or 76mm 4. Security escutcheons included. 5. 3 Keys Supplied. Classification confirmed BS EN 12209:2003 2 X 5 0 0 F 7 K A 0 0 BS 1634-1 2000 Cylinder BS EN 1303:2005 Additional requirements 13mm & 25mm rebates available. BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. Code Case Backset Centres Dead Bolt Forend Dimensions Projection Dimensions BSDC 64x80x19mm 44.5mm n/a 20mm 25x127x4.7mm 64mm BSDC 76x80x19mm 57mm n/a 20mm 25x127x4.7mm 76mm L14
Roller bolt night latch Roller bolt night latch case LRB1 WHT SCP PCP PB 30 1. Thumb turn handle withdraws and throws roller bolt. 2. Cylinder withdraws and throws roller bolt. 3. Roller bolt holds door in position when unlocked. 4. Meets the recommendations of BS 5588. Classification confirmed by Warrington apt 1121-CPD-AQ0017:2005 3 C 8 1 0 F 2 R A 0 0 BS 1634-1 2000 30 minutes Dimensional Requirements Suitable for doors from 35mm to 60mm Backset 60mm BS EN 12209 : 2003 Building Hardware - Mechanically operated locks, latches and locking plates A comprehensive classification system for assessing the wide range of products needed to satisfy the diverse requirements of the European market. Features assessed include normal use (and abuse) forces, long-term durability, fire/smoke resistance, corrosion and temperature resistance and security, both manipulative and physical. L15
Standard night latch Standard night latch case LNL1 30 WHT SCP PCP PB 1. Thumb turn handle withdraws and throws latch bolt. 2. Cylinder withdraws and throws latch bolt. BS 1634-1 2000 30 minutes Dimensional Requirements Suitable for doors from 35mm to 60mm Backset 60mm L16
Dead bolt night latch Dead bolt night latch case LDL1 WHT SCP PCP PB 30 1. Thumb turn handle withdraws and throws dead bolt. 2. Cylinder withdraws and throws dead bolt. BS 1634-1 2000 30 minutes Dimensional Requirements Suitable for doors from 35mm to 60mm Backset 60mm L17
Standard and narrow budget Bary night latch Standard night latch case BNL1 GREY Narrow night latch case BNL2 GREY 1. Thumb turn handle withdraws and throws latch bolt. 2. Cylinder withdraws and throws latch bolt. 3. Snib holds back bolt. 4. Snib dead bolts latch. Dimensional Requirements Suitable for doors from 35mm to 60mm Backset 60 and 40mm L18
Door chains / Door guards Door chain DC-018 PSS Door guard with buffer DG-109 PCP SCP Door guard with protector DG-110 PCP SCP Door guard DG-106N PCP PB SCP Concealed Door Guard Chain MC41 PCP SCP 60 L19
Door viewer 200 o glass door viewer C/W shutter DV-015 ET-14.SCP PCP SCP 30 l All models with highly polished optical glass lenses. l By extending male screw, female screw, or both (or by shortening), the door viewer can easily be adjusted for any door thickness. l Material : brass. l Door thickness : 35-60mm (3-3 8 -- 2-3 8 ). Proposed Classification in accordance with DHF Technical Specification 002 : Door viewers : November 2005 - - - 1-3 3 M Associated Standards BS EN 1634-1:2000 Fire resistance tests for door and shutter assemblies Part 1: Fire doors and shutters BS EN 1670:1998 Building hardware Corrosion resistance Requirements and test methods BS EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code) L20
Specialist components Marke 1 Bolt BZP Elevator Lift Key ELK BZP Firemans Lift Key FDK L21
London Fire Brigade locks Mortice Deadlock FB1.M Mortice Deadlock FB2.M 60 60 FBR 30 Rim Deadlock FB1.R 30 Rim Deadlock FB2.R 30 No need to double your stock, hold the Rim Conversion Kit separately, these are also reversible BS 1634-1 2000 L22
London Fire Brigade locks Rebates FB.REBATE.13 BZP London Fire Brigade Padlock LFB: Padlock LFB.KEY: Keys London Fire Brigade Padlock LFB14: Padlock LFB14.KEY: Keys London Fire Brigade Padlock LFB11: Padlock LFB.KEY11: Keys Keys FB1/FB2 Keys Mortice Strike FB.Strike L23
London Fire Brigade locks Reversible rim slam lock FB4 GREY FB4.KEY Escutcheon FB.ESC FB4.STRIKE BZP L24
Bary bolt (All items on this page are vision packed for merchandisers) Multi purpose bolt PDB WHT Patio door bolt WB WHT Window sash stop WSS PCP PB L25
Flush Bolts Solid Stainless Steel Mortice Lever Action 19mm FB150 FB200 FB300 FB600 Bolt ø 11mm Shoot 13mm Solid Stainless Steel Radius Mortice Lever Action 19mm FBR.150 FBR.200 FBR.300 FBR.600 Bolt ø 11mm Shoot 13mm 30 60 PSS 30 60 Surface Lever Action Bolts 19mm FB-019.200 FB-019.300 Metal Door Lever Action Flush Bolt FB25.300 25mm 172mm 300mm PSS Flush Door Strike FB-019.TOPSTRIKE Solid Stainless Steel Flush Door Strike FB.STRIKE PSS Easiclean Socket EC1 13mm Dust Excluding Socket 13.5mm 35mm DE1 PAA SCP L26
Other locks Bathroom deadbolt Square forend BDB Radius forend (8mm and 5mm follower) BDB.R Rebate kits Sash lock rebate RSL.13 Sash lock rebate RSL.25 Dead lock rebate RDL.13 Dead lock rebate RDL.25 Adjustable Roller Catch RC1 2 21 15 20 51 20 70 89 34 55 46 32 L27
Rim captive key budget lock Rim Captive Key Budget Lock NS.N 90 x 25.4 x 30.5mm Ø 16mm 19.6mm BZP Budget Lock Ferrule Escutcheon NS.K Ø 20mm 14mm Captive Key NS.P 90 x 45mm Ø 9.5mm BZP Budget Lock Covered Ferrule Escutcheon NS.CK Ø 20mm 15mm L28
Other locks Mortice Budget Lock NS.A 90 x 19.5 x 35.4mm 30 BZP Budget Lock Flatplate Escutcheon NS.B BZP 50 x 21.2 x 1.5mm Ø 13mm Mortice Budget Lock Strike NS.C 79 x 16 x 1.5mm BZP Budget Lock Ferrule Escutcheon NS.E 13.1 x Ø 17.8mm Ø 12.8mm BZP T Key NS.F 118 x 80mm Ø 9.5mm BZP Sprung Escutcheon NS.L 5.9mm Ø 28mm SCP Rim Budget Lock NS.H 80 x 20 x 11.2mm BZP Rim Budget Lock Strike NS.G 76.7 x 18.3 x 10mm BZP L29