Evoke 4.7 Square Adjustable HP Trimmed Features The second generation Evoke 4.7 now incorporates a High Performance LED module providing impressive performance, higher lumen delivery and consistent color. Features the fit, finish and attention to detail of the existing Evoke line that you ve loved since it s introduction in 006. Available in Round or Square aperture. Suitable for a variety of lighting schemes featuring general accent task and display applications Evoke 4.7 HP gives architects and lighting designers the flexibility to complete sustainable lighting designs. Product Overview Fixture Type: Recessed Adjustable Wattage:, 8, 0 Color Temp: 700K, 000K, 00K, 4000K CRI: 8 typ. (700K, 000K, 00K, 4000K) 90+ typ. (700K, 000K) Crisp LED Available (8W max) Dimming: ELV & TRIAC (0V/77V) Lutron Hi-lume H Series/EcoSystem - % dim with soft on, fade to black, 0V/77V 0-0V (0V/77V) - % Dim DALI dimming - % Dim Fixture Type Round/Square New Construction Trim Trimless Yes Yes Yes Yes See separate spec sheet for Round trim Trimless Electrical Data W 8W* 0W* System Watts Amps System Watts Amps System Watts Amps 0V 0.09 8 0. 0 7 77V 0.04 8 0.06 0 07 Electronic constant current LED driver W is inherently protected *8W & 0W Includes thermal protector, w power consumption LIT-06 0/08/9 Page of 6
Housing/Frame Ordering Information 4 6 7 Model For New Construction E4.7SA-HP-NC-A7 (New Construction) E4.7SA-HP-CP-A7 (Chicago Plenum (CCEA)) E4.7SA-HP-IC-A7 (Insulated Ceiling/air tight, W & 8W only) Beam Spreads SP - spot, NF - narrow flood, MFL - medium flood, FL - flood, 8 WF - wide flood, 4 4 Style T - trimmed TL - trimless (not available for use with Grid ceiling) Wattage 8 0 (not available for use with IC housing) Voltage 0 77 0/77 (for use with IC housing only) 6 7 Color Temp 8 CRI 90+ CRI 7-700K-8 9-00K-90+ CRISP - Crisp 0-000K-8 79-700K-90+ (8W max) - 00K-8 09-000K-90+ CLA - K Class A 40-4000K-8 9-00K-90+ 409-4000K-90+ (for non-dimming, select LE/TE option) LE/TE - TRIAC/ELV dimming HILUME-H-ECO - Lutron Hi-lume H Series, EcoSystem, % dim with soft on, fade to black 0-0V - 0-0V dimming, % dim DALI - DALI dimming, % dim Trim Ordering Information E4.7SA-HP-A7 Model E4.7SA-HP-A7 Style T - trimmed TL - trimless (not available for use with Grid ceiling) Finish For Trimmed Fixture MWW - matte white, white flange MBW - matte black, white flange SLVW - matte silver, white flange MBB - matte black, black flange For Trimless Fixture MW - matte white MB - matte black SLV - matte silver The "A" refers to the sequential revision in a year and "XX" refers to the year of update. Updates coincide with improved performance while not changing the overall fixture aesthetic and are reflected in the published performance data. Please contact your Amerlux representative for explanations of changes. LIT-06 0/08/9 Page of 6
Specifications Application Retail and commercial accent and display lighting Housing Construction 0 ga. steel painted matte black Formed aperture plate Cast aluminum plaster frame with perforated face (for trimless fixture only) Integral adjustable locking mounting bars Thermally protected Die-cast lamp housing and heatsink Trim Construction Die-cast aluminum seamless trim Optical 0- lockable tilt, 60 + rotation Beam Spreads: Spot, 4 ; Very Narrow Flood, 8 ; Narrow Flood, ; Flood, ; Wide Flood, 44 LED Color Temp Options: 700K, 000K, 00K, 4000K CRI: 8 typ. (700K, 000K, 00K, 4000K) 90+ typ. (700K, 000K) Crisp* and K Class A** LEDs available (8W max) R9 Values: (8 CRI), (9 CRI) Binning: MacAdam (SDCM) *Crisp: Crisp Technology delivers the warmth of colors expected from a high 90 CRI solution but also creates the natural crisp white color that is pleasing to the eye. It creates the most impactful lighting ever available, by revealing the richest whites and vibrant colors that pop. Electrical Wattage:, 8, 0 Electronic constant current LED driver, 0V/77V input This product complies with IEEE C6.4 for surge endurance up to.kv. Amerlux recommends using additional surge protection with this unit (supplied by others), surge damage is not covered under warranty. s LE/TE - Leading Edge, TRIAC, forward phase/trailing Edge, ELV, reverse phase 0-0V, Lutron and DALI systems also available See pages -6 for more dimming information Finish Wet paint Consult factory for custom finishes Mounting 6 Hanger bars included Consult factory for hanger bars greater than 6 Trimmed Fixture: For use in grid or sheetrock ceilings, max ceiling thickness Trimless Fixture: For use in sheetrock ceilings, max ceiling thickness /8 Certifications CSA approved to UL standards as tested by CSA Chicago Plenum (CCEA) option IC/AT rated option (W & 8W only) Warranty year limited warranty LIT-06 0/08/9 Page of 6
Evoke Round Adjustable CM: 4 / 4 4 7 /6 / 0 /6 / 6 4 / min - 6 max Trimmed Trimless / 4 / 4 4 / 4 4 / 4 7 7 4 / 4 6 / 8 max 4 / 4 / 6 / 8 max Ceiling cut out: / 8 dia. Ceiling cut out: 7 / 8 dia. 4 7 / 6 4 7 / 6 0 / 6 0 / 6 Plaster Frame Installation Detail (for trimless fixture only). Cast Aluminum Plaster Frame. Plaster Skim Coat (by others). Ceiling 4. Sheetrock Screw 4 LIT-06 0/08/9 Page 4 of 6
DIMMING COMPATIBILITY: Amerlux Evoke fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BELOW IS FOR WIRED DIMMERS ONLY. FOR WIRELESS DIMMERS, CONSULT FACTORY --- TRIAC (Forward Phase) DIMMING (Standard) Utilizes Standard incandescent dimmers that are in wide use in installations across the US. Best for retrofit applications where TRIAC dimmers are installed. 0V or 77V* Dims down to less than % light output (most cases) Must meet dimmer Minimum Load Requirements per dimming manufacturer TRIAC Wiring Diagram Wall Box (Incandescent Style, Wattage as required) Lutron Diva Lutron Vareo Lutron GP Panel Lutron Nova-T Lutron Skylark Lutron Grafik Eye QS Lutron Maestro" TRIAC Dimming ELV - Electronic Low Voltage (Reverse Phase) DIMMING (Standard) Utilizes specialized ELV dimmers. ELV Wiring Diagram 0V or 77V* Dims down to less than % light output (most cases) Must meet dimmer Minimum Load Requirements ELV Dimming Wall Box (ELV Style) Lutron Diva Leviton Surslide Lutron GP Panel with PHPM-PA Interface Lutron Nova-T Leviton Vizio Lutron Grafik Eye QS with PHPM-PA Interface Lutron Maestro" Lutron Vareo Lutron Skylark 0-0V - DIMMING (-0-0V Option) Integrates into a variety of building management and daylighting controls 0-0V Wiring Diagram 0V or 77V* Dims down to % light output 0-0V Gray 0-0V (-) Dimming Purple 0-0V (+) Requires interface to turn off power to driver Switched Hot Wall Box Lutron Diva - DVTV with PP-0H Interface Leviton Renoir II 0-0V Lutron Grafik Eye with GRX-TVI Interface * is 77V dimmable with appropriate dimmer (by others). All provided wiring diagrams show 0V wiring colors and method. Please refer to 77V dimmer installation instructions for 77V wiring diagrams. The absence of a dimmer from the lists above does not imply incompatibility. Please consult factory for compatibility inquiries. LIT-06 0/08/9 Page of 6
DIMMING COMPATIBILITY: Amerlux Evoke fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BELOW IS FOR WIRED DIMMERS ONLY. FOR WIRELESS DIMMERS, CONSULT FACTORY --- LUTRON H-SERIES / ECOSYSTEM (-HILUME-H-ECO Option) Integrates into Lutron EcoSystem building management 0V or 77V* Dims down to less than % light output EcoSystem EcoSystem Digital Wiring Diagram E E ECOSYS Bus EcoSystem Dimming Purple Stripe E Purple E (Cap off Orange wire) Orange Dimmed Hot Switched Hot Wall Box Lutron Diva Lutron Nova-T Lutron Maestro" Lutron Vareo Lutron EcoSystem compatible controls DALI DIMMING (-DALI OPTION) Digital control protocol allows individual fixture control DALI Wiring Diagram 0V - 77V* Dims down to % light output in most cases DALI Dimming Purple Purple/WT DALI Bus Wall Box (-Wire Fluorescent) Leviton CD0 ler Dynalite Fifth Light EMERGENCY DIMMING (-EM OPTION) Wiring Diagram Unswitched Hot Common LED Load AC LED LED LED Output Output Blue Wall Switch Thermal Protector WT/ WT/BLK Blue Yellow/BLK Yellow E L F M E F le ER D le x D G x RI A EN B V C ER Y Violet Brown Violet Brown W-ITS Converter Connector Test Switch * is 77V dimmable with appropriate dimmer (by others). All provided wiring diagrams show 0V wiring colors and method. Please refer to 77V dimmer installation instructions for 77V wiring diagrams. The absence of a dimmer from the lists above does not imply incompatibility. Please consult factory for compatibility inquiries. LIT-06 0/08/9 Page 6 of 6