s
s Energy savings up to 80% Zero maintenance Quick & easy installation Complies with Part L 2013 regulations Fully Dimmable IP54 protected against dust & moisture Superior light distribution
s We re excited to unveil our new s. These new LED panels are ideal for commercial use and fit into standard tile grid systems. s replace existing grid ceiling lighting. The Panels have an instant start and out perform their fluorescent equivalent. They save up to 80 percent in energy and last far longer. The panels come in the following sizes 300 x, 600 x and 1200 x. There are three different panel options available. The first is the single colour warm or cool white panels, including standard and high output versions. The second option is the Adjustable Colour Temperature s, when used in conjunction with our controls allow you to change the colour temperature in the room, from cool to warm, with the touch of a button. Finally we have Colour Changing RGB panels, allowing you to create different moods and effects, ideal for clubs, bars and leisure outlets. Up to 80% Energy saving Instant start Part L 2013 Compliant Fully dimmable Compatible with standard dimmers Compatible with RF, Dali, DMX512, 010V Dimmers Superior Light Distribution IP54 Mercury free
Contents Warm & Cool White s & Controls 1 6 Adjustable Colour Temperature Panels & Controls 7 9 Colour Change s & Controls 10 14
Warm & Cool White s & Controls = 1 x 5000lm 4 x 14W T5 Fluorescent 4920lm = 1 x 34W 2800lm 2 x 14W T5 Fluorescent 2460lm 1
Single Colour Standard Output 24V Dimmable Energy savings up to 80% compared to fluorescent equivalent Instant start, no flickering or humming Complies with Part L 2013 regulations Dimmable with leading edge dimmers, RF, Dali, DMX512, 010V Dimmers Excellent thermal management and refined aluminium IP54 protected against dust and moisture Photometric data available on request Depth 13mm Product Code Dimming Wattage Comparable Beam Fluorescent Angle Lifetime (hours) Lumens Lumens per Watt CRI Colour Temp LEDPANEL 34W CW Yes 34W 2 x 14W 140 40000 2800lm 83lm/W 80 4000K LEDPANEL 34W WW Yes 34W 2 x 14W 140 40000 2800lm 83lm/W 80 3000K Accessories LEDP WIRE SUSP Suspension Kit (suspend up to 1000mm) Control Options A Touch Dimmer page 3 B Switching Driver page 4 C Standard Dimming Driver page 4 D 110V Dimming Driver page 5 E Dali Dimming Driver page 5 F Wise Wireless Controls page 6 Single Colour Standard Output Long 24V Dimmable Energy savings up to 80% compared to fluorescent equivalent Instant start, no flickering or humming Complies with Part L 2013 regulations Dimmable with leading edge dimmers, RF, Dali, DMX512, 010V Dimmers Excellent thermal management and refined aluminium IP54 protected against dust and moisture Photometric data available on request Depth 13mm 1200mm Product Code Dimming Wattage Comparable Beam Fluorescent Angle Lifetime (hours) Lumens Lumens per Watt CRI Colour Temp LEDPANEL60LDIM C Yes 4 x 14W 140 40000 5000lm 83lm/W 80 4000K LEDPANEL60LDIM W Yes 4 x 14W 140 40000 5000lm 83lm/W 80 3000K Accessories LEDP WIRE SUSP Suspension Kit (suspend up to 1000mm) Control Options A Touch Dimmer page 3 B Switching Driver page 4 C Standard Dimming Driver page 4 D 110V Dimming Driver page 5 E Dali Dimming Driver page 5 F Wise Wireless Controls page 6 2
Single Colour High Output 24V Dimmable Energy savings up to 80% compared to fluorescent equivalent Instant start, no flickering or humming Complies with Part L 2013 regulations Dimmable with leading edge dimmers, RF, Dali, DMX512, 010V Dimmers Excellent thermal management and refined aluminium IP54 protected against dust and moisture Photometric data available on request Depth 13mm Product Code Dimming Wattage Comparable Beam Fluorescent Angle Lifetime (hours) Lumens Lumens per Watt CRI Colour Temp LEDPANEL CW LEDPANEL WW Accessories LEDP WIRE SUSP Control Options Yes Yes A Touch Dimmer page 3 B Switching Driver page 4 C Standard Dimming Driver page 4 D 110V Dimming Driver page 5 E Dali Dimming Driver page 5 F Wise Wireless Controls page 6 4 x 14W 4 x 14W 140 140 Suspension Kit 1000mm 40000 40000 5000lm 5000lm 83lm/W 83lm/W 80 80 4000K 3000K Photometric data available on request A. Single Colour Controls Touch Panel Dimmer 24V The Touch Panel Dimmer is made of touch sensitive glass, an easy and quick way to dim your lights. Connection mode: Common anode Supply voltage: DC1224V Static power consumption: <1W Output current: <8A Output power: 12V = 96W, 24V = 192W 1200mm Product Code : LEDP TOUCH DIM 34W 86mm 37mm 5 Panels per Dimmer 3 Panels per Dimmer 3 Panels per Dimmer 86mm M Touch Panel Dimmer L Transformer 24V N 3
B. Single Colour Controls LED Switching Driver 24V The Driver is a 24V driver for use with the range of ceiling lights. The driver has an input voltage of 24V and an output current of 700mA. Driver 24V Driver 24V 100W Product Code : LEDP 6024 Product Code : LEDP 10024 120mm 31mm 152mm 38mm 52mm 60mm C. Single Colour Controls LED Dimming Driver 24V The Triac LED Dimming Controller provides the required dim level for 24V LED strip lighting systems. Designed for ultimate flexibility, they allow users to easily add their own personal touch to illumination settings. Simple easy wiring direct to any type of standard Leading or Trailing edge dimmer switch, no need for an expensive interface controller for most Home Automation Systems. 1200mm Product Code, 30W : DIMDRIVE 24V 30W 34W 2 Panels per Dimdrive 1 Panel per Dimdrive 1 Panel per Dimdrive Product Code, 45W : DIMDRIVE 24V 45W Product Code, 80W : DIMDRIVE 24V 80W L Dimdrive 24V Normal Dimmer N SL 4
D. Single Colour Controls 110V Dimmable Driver The 110V / Push Button Dimmable Driver allows LED lamps to be controlled by many traditional intelligent dimming systems. This driver is compatible with the 010V, 110V, Resistor and Push Button insert dimming. Please note: A power supply is required for this product. When using a 12V power supply the maximum load is 100W. When using a 24V power supply the maximum load is 240W. Works with Standard 0/110V Dimmer Works with Lutron 0/110V Dimmer Works with Wise Wireless Dimming 0/110V Works with RAKO Wireless Dimming 0/110V Works with PIR Sensor Dimming Product Code : ECP70110A240W24V 34W 44mm 172mm 30mm 7 Panels per Driver Transformer 24V 4 Panels per Interface 110V Dimmable Driver 4 Panels per Interface SL N SL L E. Single Colour Controls Dali Dimmable Driver The DaliCV LED Interface is a intelligent electronic constantvoltage 1channel DALI dimmer. Please note: A power supply is required for this product. When using a 12V power supply the maximum load is 100W. When using a 24V power supply the maximum load is 200W. output current: 8A Cable clamp housing for independent mounting Operating Temperature: 50 C Case Temperature: 80 C 10V 100W 24V 200W Dimmable Product Code : DALI 7018A 34W 50mm 150mm 30mm 6 Panels per Interface L Transformer 24V N D1 D2 3 Panels per Interface DaliCV LED Interface Dali Control System 3 Panels per Interface 5
F. Single Colour Controls Wise Scene/Dimming Receiver The Wise Scene Strip Receiver is a 150W 12V/300W 24V dimmer that is controlled by wireless switches or by a pushtomake switch. It can dim 12V DC or 24V DC LEDs. It can be programmed in 4 different ways using our wireless switches or remotes. Scene Programming Dimming Programming Switching ON only Switching OFF only Wireless Switches and Remotes Product Code : WISESCENE STRIP 34W 165mm 35mm 8 Panels per Receiver 5 Panels per Receiver 5 Panels per Receiver 47mm L Transformer 24V N Wise Scene/Dimming Receiver Wireless Switch or Remote Wireless Switch 7 Button Wise Pod Remote 7 Button Wise Mouse Dimmer Dimmer & Sensor Product Code : WISE INTENSE7 WH Product Code : WISE POD7 WH Product Code : WISEGMOUSE DIM Wireless switches can be used to control any of the receivers in the Wise Controls range. The function of the switch, and each of its buttons, depends upon the function of the wireless receiver it is programmed to. Therefore a single button can be used for a variety of functions including, but not restricted to, on/off, on/off and dimming, or master off only. The Wise Pod Remote comes in 3, 7, 18 and 42 channel versions. The 7 button remote works the same as the 4 button remote, but has 7 or 42 channels. The centre button changes the LED light on the pod from 1 to 6, with each light representing another 7 buttons. The Wise Mouse Dimmer is a wireless battery powered transmitter with an integrated light sensor. It can be used on the wall or table to control the brightness in the room. The Wise Energy Switch light sensor checks the light level of both natural daylight and artificial lighting, then dims the lighting up or down to meet the level that is required. 6
Colour Temperature Adjustable s & Controls = 1 x 30W 2400lm 2 x 14W T5 Fluorescent 2460lm 17
Colour Temp Adjustable 24V Dimmable Photometric data available on request Product Code Dimming LEDPANEL 30W CCT Yes Wattage 30W Energy savings up to 80% compared to fluorescent equivalent Instant start, no flickering or humming Complies with Part L 2013 regulations Dimmable with leading edge dimmers, RF, Dali, DMX512, 010V Dimmers Excellent thermal management and refined aluminium IP54 protected against dust and moisture Depth 13mm Comparable Fluorescent Beam Angle Lifetime Lumens (hours) Lumens per Watt CRI 2 x 14W 140 40000 2400lm 80lm/W 90 Colour Temp 2500 7000K Accessories LEDP WIRE SUSP Suspension Kit (suspend up to 1000mm) Control Options G Colour Temperature Adjusting Remote page 9 H Colour Temperature Adjusting Touch Switch page 9 Photometric data available on request Warm Cool 8
G. CCT Adjustable Controls CCT Adjustable Panel Remote & Receiver 24V The LED CCT Adjustable Panel Remote is a touch colour temperature adjustable remote. It adopts a high precision touch control chip that increases touch sensitivity. Two AAA batteries are required to operate the remote available separately. Output control: Two circuits Connection mode: Common anode Receiving range: 20m Control current: 6A/circuit Product Code : LEDP CCT REMOTE 55mm 18mm 30W 9 Panels per Driver CCT Remote L N 115mm ON OFF CCT Remote Driver Transformer 24V cw ww H. CCT Adjustable Controls CCT Adjustable Touch Panel Controller 24V The LED CCT Adjustable Panel Controller is a touch panel glass colour temperature adjustable controller. It adopts a high precision touch control chip that increases touch sensitivity. Output: Two channels 96W per channel at 24V Connection mode: Common anode Supply voltage: DC1224V Static power consumption: <1W Output current: <4A (each channel) Output power: 12V<96W, 24V<192W Product Code : LEDP CCT DIM 30W 86mm 9 Panels per Switch 86mm M cw ww CCT Touch Panel Controller 37mm L N Transformer 24V 9
Colour Changing s & Controls = 1 x 23W 2 x 14W T5 Fluorescent 1 10
Colour Change RGB 24V Dimmable Energy savings up to 80% compared to fluorescent equivalent Instant start, no flickering or humming Compatible with RF, DMX, infrared No electric wave Excellent thermal management and refined aluminium IP54 protected against dust and moisture Photometric data available on request Depth 13mm Product Code Dimming Comparable Wattage Beam Fluorescent Angle Lifetime (hours) Colour Temp LEDPANEL623W RGB Yes 2 x 14W 23W 140 40000 RGB Accessories LEDP WIRE SUSP Suspension Kit (suspend up to 1000mm) Control Options I Colour Changing Touch Switch page 12 J Wise Chameleon Master page 13 K Wise Chameleon DMX/DALI page 14 Colour Change RGB 24V Dimmable Energy savings up to 80% compared to fluorescent equivalent Instant start, no flickering or humming Compatible with RF, DMX, infrared No electric wave Excellent thermal management and refined aluminium No RF interference Photometric data available on request 300mm Depth 13mm Product Code Dimming Comparable Wattage Beam Fluorescent Angle Lifetime (hours) Colour Temp LEDPANEL323W RGB Yes 2 x 14W 23W 140 40000 RGB Accessories LEDP WIRE SUSP Suspension Kit (suspend up to 1000mm) Controls I Colour Changing Touch Switch page 12 J Wise Chameleon Master page 13 K Wise Chameleon DMX/DALI page 14 11
Colour Change I. Colour Change Controls RGB Panel Controller 24V The RGB Controller is a glass RGB controller. It adopts a high precision touch control chip that increases touch sensitivity. The RGB LED controller can quick change between colours, gradual change and produce strobing effects. Output: Three channels 96W per channel at 24V Connection mode: Common anode Supply voltage: DC1224V Static power consumption: <1W Output current: <4A (each channel) Output power: 12V<144W, 24V<288W 23W 8 Panels 8 Panels 86mm RGB Touch Panel Controller B G R M Transformer 24V per Switch per Switch 37mm 86mm 23W Product Code : LEDP RGB CONTROL 1200mm 12
J. Colour Change Controls Wise Chameleon Master 12V/24V 150W/300W The Wise Chameleon Master receiver is a 12V 150W or 24V 300W LED colour change controller and LED dimmer. It is controlled by wireless switches or by a pushtomake switch. It can colour change and dim any 12V or 24V RGB LEDs (with common anode ) or single colour LEDs. It can be programmed in 6 different ways using our wireless switches: Full Colour Change with a 7 button switch Full Colour Change with a 7 button switch Dim Warm White with RGB LEDs Switching ON only Programming Switching OFF only Programming Wireless Switches and Remotes 1200mm Product Code : WISERGB STRIP M3 23W 23W 165mm 35mm 8 Panels per Receiver 8 Panels per Receiver 47mm Wise Chameleon Master L Transformer 24V N Wireless Switch or Remote Wireless Switch 7 Button Wise Pod Remote 7 Button Product Code : WISE INTENSE7 WH Product Code : WISE POD7 WH Wireless switches can be used to control any of the receivers in the Wise Controls range. The function of the switch, and each of its buttons, depends upon the function of the wireless receiver it is programmed to. Therefore a single button can be used for a variety of functions including, but not restricted to, on/off, on/off and dimming, or master off only. The Wise Pod Remote comes in 3, 7, 18 and 42 channel versions. The 7 button remote works the same as the 4 button remote, but has 7 or 42 channels. The centre button changes the LED light on the pod from 1 to 6, with each light representing another 7 buttons. See Next Page for Instructions 13
J. Colour Change Controls Using the Wise Switches & Remotes PRESS BUTTON P1,P2, P3 OR P4 TO ACCESS COLOURS; 1 RED* 2 GREEN* 3 BLUE* 4 WARM WHITE* PRESS BUTTON P5, THEN PRESS P1,P2,P3 OR P4 TO ACCESS COLOURS 5 CYAN* 6 YELLOW* 7 MAGENTA* 8 COOL WHITE * 1,5 2,6 3,7 4,8 P1 P2 P3 P4 P5 P6 P7 1 2 3 4 P1 P2 P3 P4 P5 P6 P7 5 6 7 8 P6 PRESS ONCE FOR COLOUR CYCLING. PRESS AGAIN TO REVERSE CYCLE. WHILST COLOUR CYCLING, TO CHANGE THE SPEED PRESS BUTTON: P1 = FAST (4 Sec fade/1 Sec pause ) P2 = MEDIUM (16 Sec fade/6 Sec pause) P3 = SLOW (28 Sec fade/10 Sec pause) P4 = PAUSE/GO * Holding any of these colours down will operate the dimming function. K. Colour Change Controls Wise Chameleon DMX/DALI P7 OFF The Chameleon DMX/DALI Interface brings Wise Controllers together. You can now control the Wise Chameleon from either your DMX/DALI control system or your Wise wireless switches, giving you the benefi ts of both DMX/DALI wired and Wise wireless controlling. Full Colour Change with a 7 button switch Full Colour Change with a 7 button switch Dim Warm White with RGB LEDs Switching ON only Programming Switching OFF only Programming Wireless Switches and Remotes 1200mm 23W 23W Product Code : WISEDMX/DALI RGB 8 Panels per Receiver 8 Panels per Receiver 165mm 35mm Wise Chameleon DMX/DALI Dali/DMX Dimmer Transformer 300W 24V Wise Chameleon Master L N 14
Wandsworth Showroom 21 Lydden Road Wandsworth London SW18 4LT, UK Fulham Showroom 8284 New Kings Road Fulham London SW6 4LU, UK Available at : Tel: 44 (0)20 8874 2234 Fax: 44 (0)20 8871 2262 www.mrresistor.com