Sun Protection Systems Technical catalogue Sunbreakers E, F E210 E240 E310 F80 Balance of light and shade. www.soltec.si si_soltec_techcat09_ef.indd 1
Sunbreakers E, F Sunbreaker E210 - Fixed External facade sunbreakers type E210. Alu extruded 210/30mm slat of ellipsoid form, firmly fixed and with suitable distribution under specified angle in the vertical guides, which are in maximum grating of 350cm. The guides are fixed over bracket holders into the facade. Details are provided by manufacturer. Colors of slats and steel construction upon RAL. At smaller loadings guides can be designed also by Alu profiles. Sunbreakers can be assembled also as jutting roof, slats being at the most 150 cm from the facade and guides in 250 cm grating. Steel guides will be fixed into concrete construction over bracket holders. Alu slats are fixed under specified angle between guides. Sunbreaker E210 ID No.: SOL E210-001 SOL E210-003 Fixed Powder painted steel or Alu. Onto the vertical and horizontal facade surfaces. Maximum slat width is 350 cm, height is not limited. L Anchor concrete M12 screw Bracket steel construction and powder painted upon RAL 9007 70 37 55 30 8 Facade ALU slat RAL 9007 Zn plated M12 screw 6 pcs Steel tube 100 x 40 x 4 mm, Zinc plated and powder painted RAL 9007 Shade name Sunbreaker E210 ID No. SOL E210-001 2 Technical catalogue / Sunbreakers / E. F si_soltec_techcat09_ef.indd 2
Sun Protection Systems Sunbreaker E210 - Motor drive External Soltec facade sunbreakers type E210, motor drive. Alu extruded 210/30mm slat, ellipsoid shape, painted in RAL. Slat is laterally closed with Alu covers and connected to motor drive over mechanism situated behind the guide. One motor can drive at the most two fields and max 20 m2. Slats are revolvable and fixed between vertical steel guides, dimensions 40/60/4 mm, which are Zn plated and powder painted in RAL, with suitable distribution. At smaller loadings guides can be designed also by Alu profiles. Guides are fixed by bracket holders onto the facade in max. 350 cm grating. In case of vertical slat setting slats can be revolvably fixed with suitable distribution between horizontal guides, dimensions 40/60/4 mm. In both cases guides are fixed by suitable holders into facade of the building. Grating between guides is max. 300 cm. Control: Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer: group control by means of a main switch and/or individual switch; group control by means of a switch and/or individually over remote control; control in connection with sensors such as: wind/sun/ time/rain sensor; 30 Sunbreaker E210 ID No.: SOL E210-001 SOL E210-003 Motor Powder painted steel or Alu. Onto the vertical facade surfaces. Maximum slat width is 350 cm, height is limited indirectly by motor power, which can drive max. 20 m 2 sunbreakers. 210 Shade name Sunbreaker E210 ID No. SOL E210-003 Detail Slat Technical catalogue / Sunbreakers / E, F 3 si_soltec_techcat09_ef.indd 3
Sunbreakers E, F Sunbreaker E240 - Motor drive External Soltec facade sunbreakers type E240. Alu extruded 240/35mm slat, ellipsoid shape, painted in RAL. Slat is laterally closed with Alu covers and connected to motor drive over mechanism situated behind the guide. One motor can drive at the most two fields and max 20 m2. Slats are revolvable and fixed between 40/60/4mm vertical steel guides, which are zinc plated and powder painted in RAL, with suitable distribution. For smaller loadings guides can be also designed by Alu profiles. Guides are fixed by bracket holders onto the facade in max. 350 cm grating. In case of vertical slat setting slats can be revolvably fixed with suitable distribution between 40/60/4mm horizontal guides. In both cases guides are fixed by suitable holders into facade of the building. Grating between guides is max. 330 cm. Sunbreaker E240 ID No.: SOL E240-002 Motor Zinc plated and powder painted steel or Alu. Onto the vertical facade surfaces. Maximum slat width is 350 cm, while height is limited indirectly with motor power, which can drive max. 20 m 2 sunbreakers. Control: Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer: group control by means of a main switch and/or individual switch; group control by means of a switch and/or individually over remote control; control in connection with sensors such as: wind/sun/ time/rain sensor; control in connection with a computer (»smart house«4 Technical catalogue / Sunbreakers / E. F si_soltec_techcat09_ef.indd 4
Sun Protection Systems Sunbreaker E240 - Fixed slats Sunbreaker E240 ID No.: SOL E240-002 Fixed Zinc plated and powder painted steel or Alu. External Soltec facade sunbreakers E240 type. Alu extruded slats, dimensions 240 / 35 mm, ellipsoid form, firmly and with suitable distribution fixed under specified angle to vertical guides which have max 350 mm grating. Guides are fixed by bracket holders onto the facade Details are recommended by manufacturer. Colour of slats and steel construction according to RAL. At smaller loadings guides can be executed also from Alu profiles. Onto the vertical facade surfaces. Maximum slat width is 350 cm, height is not limited. Sunbreakers can be mounted also as jutting roof, slats being at the most 150 cm from the facade and guides in 250 cm grating. Steel guides will be fixed into concrete construction by bracket holders. Alu slats are fixed under the specified angle between guides. 35 240 Shade name Sunbreaker E240 ID No. SOL E240-002 Detail Slat Technical catalogue / Sunbreakers / E, F 5 si_soltec_techcat09_ef.indd 5
Sunbreakers E, F Sunbreaker E310 - Motor drive External Soltec facade sunbreakers type E310. Alu extruded 310/35mm slat, ellipsoid shape, painted in RAL. Slat is laterally closed with Alu covers and connected to motor drive over mechanism situated behind the guide. One motor can drive at the most two fields and max 20 m2. Slats are revolvable and fixed between vertical steel guides, dimensions 60/80/4 mm, which are Zn plated and powder painted in RAL, with suitable distribution. At smaller loadings guides can be designed also by Alu profiles. Guides are fixed by bracket holders onto the facade in max. 450 cm grating. In case of vertical slat setting slats can be revolvably fixed with suitable distribution between horizontal guides, dimensions 80/60/4 mm. In both cases guides are fixed by suitable holders into facade of the building. Grating between guides is max. 400 cm. Sunbreaker E310 ID No.: SOL E310-001 SOL E310-003 Motor Zinc plated and powder painted steel or Alu. Onto the vertical facade surfaces. Maximum slat width is 450 cm, while height is limited indirectly with motor power, which can drive max. 20 m 2 sunbreakers. Control: Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer: group control by means of a main switch and/or individual switch; group control by means of a switch and/or individually over remote control; control in connection with sensors such as: wind/sun/ time/rain sensor; control in connection with a computer (»smart house«system). 6 Technical catalogue / Sunbreakers / E. F si_soltec_techcat09_ef.indd 6
Sun Protection Systems Sunbreaker E310 - Fixed Slats External facade sunbreakers type E310. Alu extruded slat of ellipsoid shape, with dimensions of 310/45mm, fixed firmly and with suitable distribution under the specified angle on the vertical guides, which are in maximum grating of 450cm. The guides are fixed over bracket holders into the facade. Details will be recommended by manufacturer. Colors of slats and steel construction upon RAL. For smaller loadings guides can also be designed by Alu profiles. Sunbreakers can be also assembled as jutting roof, slats being at most 150cm from the facade and guides in 450 cm grating. Steel guides will be fixed into concrete construction over bracket holders. Alu slats are fixed under the specified angle between guides. Sunbreaker E310 45 ID No.: SOL E310-001 SOL E310-003 310 Shade name Sunbreaker E310 ID No. SOL E310-003 Detail Slat Fixed Zinc plated and powder painted steel or Alu. Onto the vertical facade surfaces. Maximum slat width is 450 cm, height is not limited. Technical catalogue / Sunbreakers / E, F 7 si_soltec_techcat09_ef.indd 7
Sunbreakers E, F Sunbreaker bracket Sunbreaker guide Alu slat 300 dim. 300/45 mm, slat walk from 0-87 Customer conducts electrical cable 4 x 1,5 to electromotor Shade name Sunbreaker E310 ID No. SOL E310-001 Drive Motor 8 Technical catalogue / Sunbreakers / E. F si_soltec_techcat09_ef.indd 8
Sun Protection Systems EM 4x1.5 Alu slat 300 dim. 300/45 mm (Alu extension ± 1 promile of sunbreaker length) Sunbreaker bracket Sunbreaker guide 50 x 50 x 4 mm Shade name Sunbreaker E310 ID No. E310-001 - 2 Drive Detail Motor Ground plan Technical catalogue / Sunbreakers / E, F 9 si_soltec_techcat09_ef.indd 9
Sunbreakers E, F Sunbreaker F80 External facade sunbreakers Soltec type F80. Steel profile guides are fixed into vertical construction or wall on max.120 cm, painted in RAL. Alu slats 80 mm on»click«system are firmly fixed into guides under the angle of 45. An insect screen can be mounted behind the guide. Sunbreaker F80 ID No.: SOL F80-001 Fixed Zinc plated and powder painted. Onto the vertical facade surfaces. Maximum sunbreaker width is not limited under the condition that maximum grating between the guides is 120 cm. 10 Technical catalogue / Sunbreakers / E. F si_soltec_techcat09_ef.indd 10
Sun Protection Systems 76 80 Shade name Sunbreaker F80 ID No. SOL F80-001 Technical catalogue / Sunbreakers / E, F 11 si_soltec_techcat09_ef.indd 11
Balance of light and shade. Soltec - Sun Protection Systems, MIPO d.o.o., Obrtna ulica 9, 8257 Dobova, Slovenia t +386 (0)7 45 22 126, f +386 (0)7 45 22 128, e info@soltec.si, www.soltec.si si_soltec_techcat09_ef.indd 12