VSN200 Suppression Systems Product Catalogue 2018 EMEA

VSN200 Suppression Systems Product Catalogue 2018 EMEA

Version: 2018-01 Product Catalog Gas-Based Suppression System VSN 200 Fire Extinguishing Systems Fight fires using the chemical extinguishant HFC-227ea This product catalog is intended for sales purposes only. For planning, installation, commissioning and operation, please refer to the corresponding technical documentation, which are enclosed with the products. Contents Page I

Contents Catalog Page Extinguishing technology VSN 200 Fire Extinguishing System...1 Cylinder assembled Extinguishing agent cyl. UL/FM/GL, VSN 200 EU/DOT/GOST-R (drawn) 22 l, 40 l, 80 l, 100 l, 140 l, 180 l...5 Extinguishing agent cylinder UL/FM, VSN 200 type 25, (welded) 22 l, 52 l, 106 l, 147 l, 180 l...7 Cylinder valve Valve B0482-A25 and B0482-A DN33, VSN 1230/200...9 Valve B0482-B25 and B0482-B DN33 with integrated electrical release VSN 1230/200... 11 Valve B0481-A25 and B0481-A DN49, VSN 1230/200...13 Valve B0481-B25 und B0481-B DN49 with integrated electrical release VSN 1230/200...15 Cylinder accessories Type label extinguishing agent cylinder VSN 200...17 Ad-on part cylinder Release device VSN 1230/200 pneumatic...19 Release device VSN 1230/200 electrical...20 Release device VSN 1230/200 electrical with mech. blocking device...22 Release device VSN 1230/200 pneumatic/manual...24 Release device VSN 1230/200 manual...25 Release device VSN 1230/200 tackle pneum./manual - marine...26 Hose DN4 - VSN 1230/200...27 Adapter M12x1,5 - G1/8 VSN 1230/200...28 Hose DN40 and DN50 VSN 1230/200...29 Connection piece DN40 and DN50...31 Adapter check valve DN50 NPT - ISO...32 Manifold Check valve DN50 CR and CR NPT...33 Cylinder rack Clamp for extinguishing agent cylinder VSN 1230/200...34 Manifold selector valve Manifold selector valve DN65/80/100 complete pneumatic, CO 2 / inert gas (CF) / VSN 1230/200...35 Selector valve Selector valve MX-BV DN25-50 PB235, CO 2 / IG / VSN 1230/200...37 Selector valve accessories Push-button selector valve...39 Safety valve Safety valve G1/2-66 bar...40 Safety valve G1/2-140 bar...41 Nozzle Nozzles type CD, VSN 200...42 Adapter hose DN40, DN50 ISO - NPT...44 Contents Page II

Contents Catalog Page Alarm device Makrofon...45 Silencer makrofon MX-1...47 Control device Release device EM...48 Safety device malfunction pressure SFD DN4...49 Accessories connection pressure relief SFD DN4...51 Pilot control manifold CO 2 - DN15...53 Disable device complete...55 Shuttle non-return valves WRV DN4 and DN8...57 Pneumatic release device PAE - CO 2 electrical with protective cover...58 Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve...60 Pneumatic release device PAE - CO 2 electrical without protective cover...62 Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve...64 Pneumatic release device PAE - CO 2 electrical with protective cover, FM/UL...66 Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve, FM/UL...68 Pneumatic release device PAE - CO 2 electrical without protective cover, FM/UL...70 Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve, FM/UL...72 Pneumatic release device PAE - CO 2 electrical with protective cover, DOT FM/UL...74 Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve, DOT FM/UL...76 Pneumatic release device PAE - CO 2 electrical without protective cover, DOT FM/UL...78 Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve, DOT FM/UL...80 Monitoring device Contact pressure gauge VSN1230/200...82 Contact pressure gauge UL, VSN 200...84 Pressure gauge UL, VSN 200...86 Limit switch ZS 256-11z...88 Limit switch Typ US 432y, 2 contacts...89 Limit switch US 434y, 4 contacts...90 Monitoring release device EM...91 Limit switch pneum. operated...92 Monitoring loss pneumatic activation device PAE...93 System accessories Labels VSN 200 Caution!...94 Mounting accessories Toolkit VSN 1230/200...95 Screw reset tool VSN 1230/200...96 Support weighing device PAE...97 Welding fitting and flange Welding neck flange DIN 2638 - PN160...98 Pipe threaded connection Pipe threaded connection DN15-80...99 Fitting threaded connection Fittings - type D, EN 10242 galvanized...100 Contents Page III

Contents Catalog Page Pilot pipe Pipe for extinguishing pipework and pilot pipes...102 Fitting pilot pipe Unions - stock list...103 Bracket pilot piping network Cable clip B16 galv...109 Hose clip DIN 3017 and pipe clip RSGU1... 110 Accessories flange connection Gaskets PN160... 111 Contents Page IV

Extinguishing technology Halocarbon agents VSN 200 Fire Extinguishing System Approvals 1) 1) 1) S313007 1) VSN 200 multi-zone system is not FM, UL, ULC approved Contact us for information about additional approvals and listings Figure: Multi-zone system 231-010_102 / AI03_2016en 1/4 System description The VSN 200 fire extinguishing system with fire extinguishant HFC-227ea offers optimal fire protection and is particularly suitable for electrical and electronic risks. The system consists of one or more extinguishant cylinders, which are connected via a pipework with extinguishing nozzles. The design of the system is adapted to the fire risk and the spatial conditions. Directly after a developing fire was recognised automatically by the fire detection system, the fire extinguishing system is triggered. After a short pre warning time the release of the extinguishant cylinders is carried out and the calculated fire extinguishant concentration is reached in the protected room after 10 seconds. The residue-free operating extinguishant HFC-227ea has a high extinguishing effectiveness and environmental compatibility (Global Warming Potential GWP = 3500, Ozone Depletion potential ODP = 0). Further advantages are its high personal safety and the small storage volume. Pressurisation with nitrogen The extinguishant HFC-227ea does not have a sufficient vapour pressure, in order to assure a complete and effective flooding of a protected room. In order to reach the desired system pressure, the extinguishant is therefore pressurised with nitrogen on the intended system pressure of 25, 42 or 50 bar. The extinguishant HFC-227ea The extinguishant HFC-227ea that is used in VSN 200 fire extinguishing systems is used for total flooding of clearly zoned areas and is suitable for fires of the classes A and B. The extinguishant has a gas pressure of 3.91 bar at 20 C, that positively affects a fast evaporation at the nozzle and the fast distribution in the room. HFC-227ea is neither corrosive nor electrical conductive and causes no damage or residues at sensitive electronic components. It is colourless and almost odourless and a gas at ambient temperature. The molecules consist of carbon, fluorine and hydrogen. While the extinguishing effect of inert gases is based on the displacement of oxygen, HFC-227ea absorbs the heat of the flame and interrupts thereby the combustion reaction. So the extinguishing effect is caused for the most part physically and for a small part chemically. Page 1

Extinguishing technology Halocarbon agents VSN 200 Fire Extinguishing System Functional diagram single-zone system Multi-cylinder system Item Designation Product sheet Item Designation Product sheet 231-010_102 / AI03_2016en 2/4 1 Extinguishing agent cylinder see cylinder assembled 9 Release device pneumatic see ad-on part cylinder 2 Clamp for extinguishing agent cylinder see cylinder rack 10 Hose DN4 (5/32 ) or Pilot pipe DN4 (5/32 ) Page 2 see ad-on part cylinder see pilot pipe 3 Contact pressure gauge see monitoring device 11 Adapter M12x1,5 see ad-on part cylinder 4 Valve see cylinder valve 12 Check valve type MX-CR see manifold 5 6 Release device electrical (also available with a mechanic blocking device) Release device manual or pneumatic/manual see ad-on part cylinder 13 Pipework see ad-on part cylinder see ad-on part cylinder 14 Discharge nozzle, nozzle type CD see nozzle 7 Hose DN40 and DN50 (1.1/2 and 2 ) see ad-on part cylinder 15 Pneumatically actuated limit switch - 8 Safety device malfunction pressure SFD DN4 (Safeguard against slow gas leaks) see control device 16 Manual release of the limit switch -

Extinguishing technology Halocarbon agents VSN 200 Fire Extinguishing System Functional diagram single-zone system Multi-cylinder system with pneumatic release device (PAE) Item Designation Product sheet Item Designation Product sheet 1 Extinguishing agent cylinder see cylinder assembled 11 Protective cover see control device 231-010_102 / AI03_2016en 3/4 2 Clamp for extinguishing agent cylinder see cylinder rack 12 3 Contact pressure gauge see monitoring device 13 Pneumatic release device (PAE), complete including weighing device Safety device malfunction pressure SFD DN4 (Safeguard against slow gas leaks) Page 3 see control device see control device 4 Valve see cylinder valve 14 Blocking device see control device 5 Hose DN40 and DN50 (1.1/2 and 2 ) see ad-on part cylinder 15 Check valve type MX-CR see manifold 6 Push-button selector valve (Manual pressure relief valve) see selector valve accessories 16 Pipework see ad-on part cylinder 7 Adapter M12x1,5 see ad-on part cylinder 17 Discharge nozzle, nozzle type CD see nozzle 8 Release device pneumatic see ad-on part cylinder 18 Pneumatically actuated limit switch - 9 10 Hose DN4 (5/32 ) or Pilot pipe DN4 (5/32 ) Extinguishing agent cylinder (Pilot cylinder) see ad-on part cylinder see pilot pipe see cylinder assembled 19 Manual release of the limit switch -

Extinguishing technology Halocarbon agents VSN 200 Fire Extinguishing System Functional diagram multi-zone system * not UL / not FM Item Designation Product sheet Item Designation Product sheet 1 Extinguishing agent cylinder see cylinder assembled 12 Downstream piping see ad-on part cylinder 2 Clamp for extinguishing agent cylinder see cylinder rack 13 3 Contact pressure gauge see monitoring device 14 Selector valve DN25, DN40, DN50 (1, 1.1/2, 2 ) Selector valve DN65-100 (2.1/2-4 ) neumatic see manifold selector valve see selector valve 4 Valve see cylinder valve 15 Bracket - 231-010_102 / AI03_2016en 4/4 5 Hose DN40 and DN50 (1.1/2 and 2 ) see ad-on part cylinder 16 Safety valve G1/2-66 bar (957 psi) see safety valve 6 Release device pneumatic see ad-on part cylinder 17 Blocking device see control device 7 Check valve type MX-CR see manifold 18 Safety valve G1/2-140 bar (2030 psi) see safety valve 8 Manifold see ad-on part cylinder 19 9 Hose DN4 (5/32 ) or Pilot pipe DN4 (5/32 ) see ad-on part cylinder see pilot pipe 10 Manual release of the limit switch - 21 11 Pneumatically actuated limit switch - 22 Multi-zone systems safeguard several extinguishing zones. If the extinguishing zones are of different sizes, multi-zone systems will be equipped with several extinguishing agent cylinders. The extinguishing agent supply and, thus, the number of extinguishing agent cylinders always follow the largest extinguishing zone. When activated, the system will only flood one extinguishing zone. 20 DN15 (1/2 ) pilot distributor (as shown) or with solenoid valve 2/2-ways complete Safety device malfunction pressure SFD DN4 (Safeguard against slow gas leaks) Pneumatic release device (PAE), complete including weighing device Extinguishing agent cylinder (Pilot cylinder) Page 4 see control device see control device see control device see cylinder assembled

Extinguishing technology Halocarbon agents Cylinder Halocarbon agents assembled Extinguishing agent cyl. UL/FM/GL, VSN 200 EU/GL/EAC/UN/DOT (drawn) 22 l, 40 l, 80 l, 100 l, 140 l, 180 l Approvals S313007 1), 3), 3) 4) LISTED 1) Part of the system approval VSN 200 Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230). Extinguishing agent cylinders must only be filled by refilling companies which are listed in UL-file EX26532. 3) Valve type B and B25 without UL / ULC approval 4) Part of the system approval e.g. part no. 888454: Extinguishing agent cyl. UL/FM/GL 22.0 25bar-VSN 200 EU/DOT/GOST-R see product information valve B0481 DN49 / B0482 DN33 part no. 887866 231-112_103 / AI04_2016en 1/2 Steel- Part no. Amount filled 5) Empty Pressure cylinder 7) Nominal Valve type 6) weight at 21 C min. max. (70 F) volume approx. UL / ULC CE / GL / UL B / B25 VdS / CE VdS A / A25 FM / GL ULC / FM (not UL / ULC) bar (psi) l (lbs) kg (lbs) kg (lbs) kg (lbs) kg (lbs) kg (lbs) 22,0 (55) 888454 888455 8,8 (19,5) 11 (24,3) 22,8 (50,4) 25,0 (55, 50 (110) 40,0 (100) 888457 888458 16 (35,3) 20 (44,1) 41,6 (91,7) 45,6 (100,5) 59 (130) 80,0 (200) 8) 888467 888469 32 (70,6) 40 (88, 83,2 (183,4) 91,2 (201,0) 104 (229) 25 (360) 80,0 (200) 9) 888557 888558 32 (70,6) 40 (88, 83,2 (183,4) 91,2 (201,0) 99 (218) 100,0 (250) 888471 888472 40 (88, 50 (110,3) 104 (229, 114 (251,3) 127 (280) 140,0 (350) 888561 888562 56 (123,5) 70 (154,4) 145,6 (320,9) 159,6 (351,8) 131 (289) 180,0 (450) 888563 888564 72 (158,8) 90 (198,5) 187,2 (412,7) 205,2 (452,3) 179 (395) 22,0 (55) 888459 888460 8,8 (19,5) 11 (24,3) 22,8 (50,4) 25,0 (55, 50 (110) 40,0 (100) 888461 888462 16 (35,3) 20 (44,1) 41,6 (91,7) 45,6 (100,5) 59 (130) 80,0 (200) 8) 888475 888476 32 (70,6) 40 (88, 83,2 (183,4) 91,2 (201,0) 104 (229) 42 (610) 80,0 (200) 9) 888565 888566 32 (70,6) 40 (88, 83,2 (183,4) 91,2 (201,0) 99 (218) 100,0 (250) 888477 888478 40 (88, 50 (110,3) 104 (229, 114 (251,3) 127 (280) 140,0 (350) 888567 888568 56 (123,5) 70 (154,4) 145,6 (320,9) 159,6 (351,8) 131 (289) 180,0 (450) 888569 888570 72 (158,8) 90 (198,5) 187,2 (412,7) 205,2 (452,3) 179 (395) 22,0 (55) 888463 888464 8,8 (19,5) 11 (24,3) 18,7 (41, 23,1 (50,9) 50 (110) 40,0 (100) 888465 888466 16 (35,3) 20 (44,1) 34 (74,9) 42 (92,5) 59 (130) 80,0 (200) 8) 888482 888483 32 (70,6) 40 (88, 68 (149,9) 84 (185,1) 104 (229) 50 (725) 80,0 (200) 9) 888571 888573 32 (70,6) 40 (88, 68 (149,9) 84 (185,1) 99 (218) 100,0 (250) 888484 888485 40 (88, 50 (110,3) 85 (187,3) 105 (231,4) 127 (280) 140,0 (350) 888574 888575 56 (123,5) 70 (154,4) 119 (262,3) 147 (324) 131 (289) 180,0 (450) 888576 888577 72 (158,8) 90 (198,5) 153 (337,3) 189 (416,6) 179 (395) 5) Order informations The order has to specificed with the filling quantity. The extinguishing agent VSN 200 (HFC-227ea) part no. 889298 must be ordered additionally. 6) - 9) Footnotes see on page 2 TPED GL EAC UN DOT Page 5

6) 7) 8) 9) Extinguishing technology Halocarbon agents Cylinder Halocarbon agents assembled Extinguishing agent cyl. UL/FM/GL, VSN 200 EU/GL/EAC/UN/DOT (drawn) 22 l, 40 l, 80 l, 100 l, 140 l, 180 l Valve type A / A25 (25 bar): Valve B0482-A DN33 / B0481-A DN49 Valve B0482-A25 DN33 / B0481-A25 DN49 (for 25 bar) Valve type B / B25 (25 bar): (Valves with integrated electrical release) Valve B0482-B DN33 / B0481-B DN49 Valve B0482-B25 DN33 / B0481-B25 DN49 (for 25 bar) Approval with collective certificate by: - TPED, notified body according to European directive 2010/35/EU - GL (Germanischer Lloyd) according to directive MED 96/98/EC - EAC, notified body according to techn. regulations TP TC 032/2013 - UN, notified body as UN Pressure Receptacles for use and transport in the USA and Canada - DOT (US Department of Transportation) 80.0 l - Exting. agent cylinder with ød = 267 mm (10.51") 80.0 l - Exting. agent cylinder with ød = 406 mm (15.98") Marking - Marking no. according to GGVS/ADR: UN 1058 in the area X - Part no. marked in the area Y Dimension drawing Dimensions in mm (inch) Valve type A / A25: Valve type B / B25: (Valve with integrated electrical release) Technical data Extinguishing agent...vsn 200 (HFC-227ea) Min. fill ratio: - VdS / CE...0.4 kg/l (25.0 lbs/ft 3 ) - UL / ULC / FM / GL...0.5 kg/l (31.1 lbs/ft 3 ) Max. fill ratio, 25 bar / 42 bar (360 psi / 610 psi): - VdS...1.04 kg/l (64.9 lbs/ft 3 ) - CE / GL / UL / ULC / FM...1.14 kg/l (71.1 lbs/ft 3 ) Max. fill ratio, 50 bar (725 psi): - VdS...0.85 kg/l (53.0 lbs/ft 3 ) - CE / GL / UL / ULC / FM...1.05 kg/l (65.5 lbs/ft 3 ) Operating temperature range:...-20 C to +50 C (-4 F to 122 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Cylinder filled...by a qualified filling centre Filling report...with order no. and cylinder no. Transport...see safety data sheet Valves...see cylinder valve Technical data steel cylinder (blank): Steel cylinder...seamless (drawn) Working pressure...max. 60 bar / 60 C (870 psi / 140 F) Finish...RAL3000 - flame red...other colour upon customer request (Note: colour, colour type are part of the UL / ULC approval) Marking and stamping according to: - TPED / GL...acc. to directive 2010/35/EU,...directive 2008/68/EC, ISO 13769 - EAC...Eurasian Economic Union and regulations TP TC 032/2013 - UN...UN Pressure Receptacles for use and...transport in the USA and Canada - DOT...DOT regulations (DOT-3AA-910) Additional marking: - Owner marking, Minimax Feuerschutz...MF - Owner no. (acc. to order)...xxxxxxxx - Tare weight...xxxxxxxx 7) 231-112_103 / AI04_2016en 2/2 ~L Protection cap ~C Adjusted and cut off with an angle of 15 during the valve mounting 5 ±2.5 (0.2 ±0.1 ) ød Bottom shape concave or convex Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200..887644, see ad-on part cylinder Contact pressure gauge VSN 1230/200...see monitoring device Clamp for extinguishing agent cyl. VSN 1230/200...see cylinder rack Release devices for valve type A / A25 and B / B25: Pneumatic, Pneumatic/Manual, Manual, Tackle pneumatic/manual - marine...see ad-on part cylinder Release devices for valve type A / A25 only: Electrical and Electrical with mech. blocking device...see ad-on part cylinder Nominal volume ~L ~C Page 6 ød ±3 (±0.1 22.0 l (55 lbs) 970 (38.19) 749 (29.49) 229 (9.00) 40.0 l (100 lbs) 1450 (57.09) 1229 (48.39) 229 (9.00) 80.0 l (200 lbs) 1960 (77.17) 1757 (69.17) 267 (10.51) 80.0 l (200 lbs) 1090 (42.91) 887 (34.9 406 (15.98) 100.0 l (250 lbs) 1800 (70.87) 1597 (62.87) 316 (12.44) 140.0 l (350 lbs) 1570 (61.81) 1367 (53.8 406 (15.98) 180.0 l (450 lbs) 1910 (75.20) 1707 (67.20) 406 (15.98) Nominal diameter valve DN33 DN49

Extinguishing technology Halocarbon agents Cylinder Halocarbon agents assembled Extinguishing agent cylinder UL/FM, VSN 200 type 25, (welded) 22 l, 52 l, 106 l, 147 l, 180 l Approvals S313007 1), 3), 3) 4) LISTED 1) Part of the system approval VSN 200. Exception: Cylinder with liquid level indicator. Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230). Extinguishing agent cylinders must only be filled by refilling companies which are listed in UL-file EX26532. 3) Valve type B25 without UL / ULC approval 4) Part of the system approval e.g. part no. 914146: Ext.agent cyl. UL/FM 22l-A-25bar-VSN200 DOT/TC see product information valve B0481 DN49 / B0482 DN33 part no. 887866 Pressure at 21 C (70 F) Nominal volume A25 Part no. Valve type 6) B25 (not UL / ULC) Steel cylinder 7) min. UL / ULC VdS / CE FM Amount filled 5) VdS max. CE / UL ULC / FM Empty weight approx. bar (psi) l (lbs) kg (lbs) kg (lbs) kg (lbs) kg (lbs) kg (lbs) 25 (360) UL / FM - extinguishing agent cylinder 22.0 (60) 914146 914721 8.8 (19.4) 11 (24.3) 22.8 (50.4) 25.0 (55. 40 (88) 52.0 (130) 889098 889099 20.8 (45.9) 26 (57.4) 54.0 (119. 59.2 (130.6) 49 (108) 106.0 (270) 889100 889101 DOT / TC 8) 42.4 (93.5) 53 (116.9) 110.2 (243.0) 120.8 (266.4) 86 (190) 147.0 (370) 889103 889104 58.8 (129.7) 73.5 (162.1) 152.8 (337.0) 167.5 (369.4) 104 (229) 180.0 (450) 910508 910509 72.0 (158.8) 90 (198.5) 187.2 (412.7) 205.2 (452.3) 142 (313) 231-112_104 / AI05_2016en 1/2 5) 6) 25 (360) UL / FM - extinguishing agent cylinder with liquid level indicator (not part of the VdS system approval) 106.0 (270) 914148-42.4 (93.5) 53 (116.9) 110.2 (243.0) 120.8 (266.4) 95 (210) 147.0 (370) 914149 - DOT / TC 8) 58.8 (129.7) 73.5 (162.1) 152.8 (337.0) 167.5 (369.4) 114 (251) 180.0 (450) 914150-72.0 (158.8) 90 (198.5) 187.2 (412.7) 205.2 (452.3) 130 (286) Order informations The order has to specificed with the filling quantity. The extinguishing agent HFC-227ea part no. 889298 must be ordered additionally. A25 = Valve B0482-A25 DN33 (for 22.0 l / 52.0 l) Valve B0481-A25 DN49 (for 106.0 l / 147.0 l / 180.0 l) B25 = Valve B0482-B25 DN33 (for 22.0 l / 52.0 l) Valve B0481-B25 DN49 (for 106.0 l / 147.0 l / 180.0 l) (Valves with integrated electrical release) 7) 8) Approval with collective certificate by: - DOT (US Department of Transportation) - TC (Transport Canada) Caution It is not allowed to transport filled steel cylinder (DOT / TC) in Europe Page 7

Extinguishing technology Halocarbon agents Cylinder Halocarbon agents assembled Extinguishing agent cylinder UL/FM, VSN 200 type 25, (welded) 22 l, 52 l, 106 l, 147 l, 180 l Technical data Extinguishing agent...hfc-227ea Fill ratio: - Min. VdS / CE...0.4 kg/l (25.0 lbs/ft 3 ) UL / ULC / FM...0.5 kg/l (31.1 lbs/ft 3 ) - Max. VdS...1.04 kg/l (64.9 lbs/ft 3 ) CE / UL / ULC / FM...1.14 kg/l (71.1 lbs/ft 3 ) Operating temperature range:...-20 C to +50 C (-4 F to 122 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Cylinder filled...by a qualified filling centre Filling report...with order no. and cylinder no. Transport...see safety data sheet Valves...see cylinder valve Technical data steel cylinder (blank): steel cylinder (welded)...according to DOT and TC regulations Working pressure...max. 35 bar / 50 C (507 psi / 122 F) Finish...Federal Red P20750...other colour upon customer request (Note: colour, colour type are part of the UL / ULC approval) Marking...according to DOT and TC regulations Additional marking: - Owner marking, Minimax Feuerschutz...MF - Owner no. (acc. to order)...xxxxxxxx - Tare weight...tarexxx - DOT specification...dot-4bw500 - TC specification...tc-4bwm34 Dimension drawing Dimensions in mm (inch) ~L Protection cap ~C Adjusted and cut off with an angle of 15 during the valve mounting 5 ±2.5 (0.2 ±0.1 ) Valve type A25: ød Only available with 106.0 l / 147.0 l / 180.0 l Only for cylinders with liquid level indicator Valve type B25: (Valve with integrated electrical release) 231-112_104 / AI05_2016en 2/2 Marking Part no. marked in the area Y Not included in delivery Type label...see cylinder accessories Adapter M12x1.5 - G1/8 MX 1230/200...887644, see ad-on part cylinder Contact pressure gauge MX 1230/200...see monitoring device Clamp for extinguishing agent cyl. MX 1230/200...see cylinder rack Release devices for valve type A25 and B25: Pneumatic, pneumatic/manual, manual, tackle pneumatic/manual - marine...see ad-on part cylinder Release devices for valve type A25 only: Electrical and Electrical with mech. blocking device...see ad-on part cylinder Nominal volume L ±10 (±0.39) Page 8 C ±10 (±0.39) 22.0 l (55 lbs) 809 (31.85) 588 (23.15) 254 (10) 52.0 l (130 lbs) 1434 (56.46) 1213 (47.76) 254 (10) 106.0 l (270 lbs) 1241 (48.86) 1038 (40.87) 406.6 (16) 147.0 l (370 lbs) 1575 (62.01) 1372 (54.0 406.6 (16) 180.0 l (450 lbs) 1854 (72.99) 1651 (65.00) 406.6 (16) ød

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0482-A25 and B0482-A DN33, VSN 1230/200 Approvals / CE marking 1) 1) G307011 LISTED 1134-CPR-1007 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887964: Valve B0482-A25 DN33 see product information valve B0481 DN49 / B0482 DN33 part no. 887866 Spare parts - Bursting disk 63.5 bar for B0482-A25, part no. 915518 - Bursting disk 89 bar for B0482-A, part no. 888026 Working pressure Designation Part no. at 21 C (69.8 F) B0482-A25 DN33 88 7964 25 bar (360 psi) Valve B0482-A DN33 88 7662 50 bar (725 psi) Weight approx. 4.4 kg (9.7 lbs) 231-131_101 / AI02_2016en 1/2 Technical data Extinguish. agent...fk-5-1-12, HFC-227ea Nominal diameter...dn33 (1.1/2") (free cross-sectional area at minimum flow path:... 697 mm² (1.08 square inch)) Operating temperature range:...-20 C to +50 C (-4 F to 122 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Working pressure at 50 C (122 F): - Ventil B0482-A25 DN33...max. 35 bar (508 psi) - Ventil B0482-A DN33...max. 60 bar (870 psi) To be used for steel cylinder...from 22.0 l to 50.0 l...(60 lbs to 140 lbs) Valve type...type 2 acc. to EN 12094-4 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Material / Finish Housing, Adapter, Screws...brass Spindles, Seal retainer...brass O-ring / Seal of seat...nbr Bursting disk...nickel Spring...steel Damping...PA 6.6 Marking Approval...π0029 - CE1134 - VdS Part no. (VSN / manufacturer)...887964 / B04820021,...887662 / B04820023 Manufacturing date...ww/yy Manufacture s sign...3 stars Working pressure...25 bar / 50 bar at 21 C Nominal diameter...ø33 Included in delivery Valve type B0482-A25/A DN33 Prod. information valve B0481 DN49 / B0482 DN33 part no. 887866 Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Contact pressure gauge VSN 1230/200...see monitoring device Dip tube VSN 1230/200 for valve DN33...887657 (dip tupes are to be shortened as necessary in acc. to specified dimension given of the extinguishing agent cylinder) Release devices VSN 1230/200: - Electrical...see ad-on part cylinder - Electrical with mech. blocking device...see ad-on part cylinder - Pneumatic...see ad-on part cylinder - Pneumatic/Manual...see ad-on part cylinder - Manual...see ad-on part cylinder - Tackle pneumatic/manual - marine...see ad-on part cylinder Page 9

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0482-A25 and B0482-A DN33, VSN 1230/200 Dimension drawing Dimensions in mm (inch) Section: F - F 231-131_101 / AI02_2016en 2/2 Page 10

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0482-B25 and B0482-B DN33 with integrated electrical release VSN 1230/200 Approvals / CE marking 1) G307011 1134-CPR-1007 1) Part of the system approval e.g. part no. 887965: Valve B0482-B25 DN33 with integrated electrical release see product information valve B0481 DN49 / B0482 DN33 part no. 887866 Spare parts - Bursting disk 63.5 bar for B0482-B25, part no. 915518 - Bursting disk 89 bar for B0482-B, part no. 888026 Designation Part no. Working pressure at 21 C (69.8 F) Valve with integrated B0482-B25 DN33 887965 25 bar (360 psi) electrical release B0482-B DN33 887663 50 bar (725 psi) Weight approx. 4.7 kg (10.4 lbs) 231-131_102 / AI02_2016en 1/2 Technical data Extinguish. agent...fk-5-1-12, HFC-227ea) Nominal diameter...dn33 (1.1/2") (free cross-sectional area at minimum flow path:... 697 mm² (1.08 square inch)) Operating temperature range:...-20 C to +50 C (-4 F to 122 F) FM...-18 C to +50 C (0 F to 122 F) Working pressure at 50 C (122 F): - Valve B0482-B25 DN33...35 bar (508 psi) - Valve B0482-B DN33...60 bar (870 psi) To be used for steel cylinder...from 22.0 l to 50.0 l...(60 lbs to 140 lbs) Valve type...type 2 acc. to EN 12094-4 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Integrated electrical release: - Voltage...24 V DC - Current intensity...0.25 A ±10 % - Output...6 W - Protection category...ip 54 - Duty cycle...100 % Material / Finish Housing, Adapter, Screws...brass Spindles, Seal retainer...brass O-ring / Seal of seat...nbr Bursting disk...nickel Spring...steel Damping...PA 6.6 Marking Approval...π0029 - CE1134 - VdS Part no. (VSN / manufacturer)...887965 / B04820022,...887663 / B04820024 Manufacturing date...ww/yy Manufacture s sign...3 stars Working pressure...25 bar / 50 bar at 21 C Nominal diameter...ø33 Included in delivery Valve type B0482-B25/B DN33 with integrated electrical release Prod. information valve B0481 DN49 / B0482 DN33 part no. 887866 Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Contact pressure gauge MX 1230/200...see monitoring device Dip tube MX 1230/200 for valve DN33...887657 (dip tupes are to be shortened as necessary in acc. to specified dimension given of the extinguishing agent cylinder) Release devices MX 1230/200: - Pneumatic...see ad-on part cylinder - Pneumatic/Manual...see ad-on part cylinder - Manual...see ad-on part cylinder - Tackle pneumatic/manual, marine...see ad-on part cylinder Page 11

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0482-B25 and B0482-B DN33 with integrated electrical release VSN 1230/200 Dimension drawing Dimensions in mm (inch) Section: D - D Section: F - F 231-131_102 / AI02_2016en 2/2 Page 12

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0481-A25 and B0481-A DN49, VSN 1230/200 Approvals / CE marking 1) 1) G307011 LISTED 1134-CPR-1007 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887966: Valve B0481-A25 DN49 see product information valve B0481 DN49 / B0482 DN33 part no. 887866 Spare parts - Bursting disk 63 bar for B0481-A25, part no. 915517 - Bursting disk 88 bar for B0481-A, part no. 889295 Working pressure Designation Part no. at 21 C (69.8 F) B0481-A25 DN49 887966 25 bar (360 psi) Valve B0481-A DN49 887664 50 bar (725 psi) Weight approx. 8.9 kg (19.6 lbs) 231-131_103 / AI02_2016en 1/2 Technical data Extinguish. agent...fk-5-1-12, HFC-227ea Nominal diameter...dn49 (2") (free cross-sectional area at minimum flow path:...1515 mm² (2.348 square inch)) Operating temperature range: - VdS...-20 C to +50 C (-4 F to 122 F) - UL / ULC / FM...-18 C to +50 C (0 F to 122 F) - GL...-20 C to +56 C (-4 F to 132 F) Working pressure at 50 C (122 F): - Valve B0481-A25 DN49...35 bar (508 psi) - Valve B0481-A DN49...60 bar (870 psi) To be used for steel cylinder...from 80.0 l to 180.0 l...(220 lbs to 500 lbs) Valve type...type 2 acc. to EN 12094-4 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Material / Finish Housing, Adapter, Screws...brass Spindles, Seal retainer...brass O-ring / Seal of seat...nbr Bursting disk...nickel Spring...steel Damping...PA 6.6 Marking Approval...π0029 - CE1134 - VdS Part no. (VSN / manufacturer)...887966 / B04810020,...887664 / B04810022 Manufacturing date...ww/yy Manufacture s sign...3 stars Working pressure...25 bar / 50 bar at 21 C Nominal diameter...ø49 Included in delivery Valve type B0481-A25/A DN49 Prod. information valve B0481 DN49 / B0482 DN33 part no. 887866 Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Contact pressure gauge VSN 1230/200...see monitoring device Dip tube VSN 1230/200 for valve DN49...887659 (dip tupes are to be shortened as necessary in acc. to specified dimension given of the extinguishing agent cylinder) Release devices VSN 1230/200: - Electrical...see ad-on part cylinder - Electrical with mech. blocking device...see ad-on part cylinder - Pneumatic...see ad-on part cylinder - Pneumatic/Manual...see ad-on part cylinder - Manual...see ad-on part cylinder - Tackle pneumatic/manual - marine...see ad-on part cylinder Page 13

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0481-A25 and B0481-A DN49, VSN 1230/200 Dimension drawing Dimensions in mm (inch) Section: B - B 231-131_103 / AI02_2016en 2/2 Page 14

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0481-B25 und B0481-B DN49 with integrated electrical release VSN 1230/200 Approvals / CE marking 1) G307011 1134-CPR-1007 1) Part of the system approval e.g. part no. 887967: Valve B0481-B25 DN49 with integrated electrical release see product information valve B0481 DN49 / B0482 DN33 part no. 887866 Spare parts - Bursting disk 63 bar for B0481-B25, part no. 915517 - Bursting disk 88 bar for B0481-B, part no. 889295 Designation Part no. Working pressure at 21 C (69.8 F) Valve with integrated B0481-B25 DN49 887967 25 bar (360 psi) electrical release B0481-B DN49 887665 50 bar (725 psi) Weight approx. 9.3 kg (20.5 lbs) 231-131_104 / AI02_2016en 1/2 Technical data Extinguish. agent...fk-5-1-12, HFC-227ea Nominal diameter...dn49 (2") (free cross-sectional area at minimum flow path:...1515 mm² (2.348 square inch)) Operating temperature range:...-20 C to +50 C (-4 F to 122 F) FM...-18 C to +50 C (0 F to 122 F) Working pressure at 50 C (122 F): - Valve B0481-B25 DN49...35 bar (508 psi) - Valve B0481-B DN49...60 bar (870 psi) To be used for steel cylinder...from 80.0 l to 180.0 l...(220 lbs to 500 lbs) Valve type...type 2 acc. to EN 12094-4 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Integrated electrical release: - Voltage...24 V DC - Current intensity...0.25 A ±10 % - Output...6 W - Protection category...ip 54 - Duty cycle...100 % Material / Finish Housing, Adapter, Screws...brass Spindles, Seal retainer...brass O-ring / Seal of seat...nbr Bursting disk...nickel Spring...steel Damping...PA 6.6 Marking Approval...π0029 - CE1134 - VdS Part no. (VSN / manufacturer)...887967 / B04810020,...887665 / B04810023 Manufacturing date...ww/yy Manufacture s sign...3 stars Working pressure...25 bar / 50 bar at 21 C Nominal diameter...ø49 Included in delivery Valve type B0481-B25/B DN49 with integrated electrical release Product informat. valve B0481 DN49 / B0482 DN33 part no. 887866 Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Contact pressure gauge VSN 1230/200...see monitoring device Dip tube VSN 1230/200 for valve DN49...887659 (dip tupes are to be shortened as necessary in acc. to specified dimension given of the extinguishing agent cylinder) Release devices VSN 1230/200: - Pneumatic...see ad-on part cylinder - Pneumatic/Manual...see ad-on part cylinder - Manual...see ad-on part cylinder - Tackle pneumatic/manual - marine...see ad-on part cylinder Page 15

Extinguishing technology Halocarbon agents Halocarbon agents cylinder valve Valve B0481-B25 und B0481-B DN49 with integrated electrical release VSN 1230/200 Dimension drawing Dimensions in mm (inch) Section: B - B Section: A - A 231-131_104 / AI02_2016en 2/2 Page 16

Extinguishing technology Halocarbon agents Halocarbon agents cylinder accessories Type label extinguishing agent cylinder VSN 200 Approvals 1) 1) 1) LISTED Type label (de and en) Listed system covered by UL-file EX26532, Material and technical conditions of supply: UL listeted Marking and Labeling System Part of the system approval e. g. part no. 887897: Type label extinguishing agent cylinder VSN 200 maintenance-free Designation Language Part no. Weight German (de) 887897 3) 0.025 kg Type label extinguishing agent cylinder VSN 200 English (en) 887881 Spanish (es) 910908 3) (0.055 lbs) 3) with UL/ULC/FM installation only additionally to the English type label 231-140_102 / AI02_2015en 1/2 Technical data Type label (de), (en): Material and technical conditions of supply: UL listeted Marking and Labeling System Type label (es): Material PVC foil self adhesive 0.2 mm thickness Dimensions (width x height)...297 x 250 (11,69" x 9,84") Script... RAL9003 - white Ground...RAL9004 - black Glue...permanent, sticking firmly Storage of glue layer...min. 3 years For glass surfaces, plastic surfaces, structured cast metal surfaces, and powdered/varnished surfaces. Page 17

Extinguishing technology Halocarbon agents Halocarbon agents cylinder accessories Type label extinguishing agent cylinder VSN 200 231-140_102 / AI02_2015en 2/2 Type label extinguishing agent cylinder VSN 200 English (en) Page 18

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 pneumatic Approvals / CE marking 1) 3) 1) LISTED part no. 887669: Release device pneumatic VSN200 1134-CPR-1007 1) Only in conjunction with valve B0481 / B0482 (G307011) or with valve B0480 (G302023) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) 3) Part of the system approval see product information release device pn part no. 887862 Designation Part no. Weight Release device VSN 1230/200 pneumatic 887669 0.48 kg (1.1 lbs) Technical data Type / part no. manufacturer...b04420066 Response pressure min....21 bar (305 psi) max....360 bar (5221 psi) Operating temperature range: - VdS...-20 C to +50 C (-4 F to 122 F) - UL / ULC / FM...-18 C to +50 C (0 F to 122 F) - GL......-20 C to +56 C (-4 F to 132 F) Note The actuating pressure must be applied for at least 5 seconds. The release device is equipped with two connections for pilot pipes to allow the control gas to be passed on to additional release devices. Dimension drawing Dimensions in mm (inch) Application Pneumatic actuation of extinguishing agent cylinder valves of type B0481 / B0482 (see cylinder valve, Halocarbon), type B0482 (see cylinder valve, inert gas extinguishing technology). One extinguishing agent cylinder valve each can be openend pneumatically. Included in delivery Release device VSN 1230/200 pneumatic Product information release device pn part no. 887862 Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Plug for pilot connection G1/8 VSN...888032 Additional possible use also with: Release device electrical...see ad-on part cylinder 231-210_101 / AI03_2016en 1/1 Section: A - A Page 19

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 electrical Approvals / CE marking 1) 3) 1) LISTED 1134-CPR-1007 1) Only in conjunction with valve B0481 / B0482 (G307011) or with valve B0480 (G302023) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) 3) Part of the system approval e.g. part no. 887667: Release device electrical VSN200 see product information release device el. part no. 887863 for use in accordance with UL system approval: see product information electrical release VSN 1230/200 part no. 889299 Designation Part no. Weight Release device VSN 1230/200 electrical with diode 4) 887667 without diode 889323 2.49 kg (5.5 lbs) 231-210_102 / AI04_2016en 1/2 Technical data Type / part no. manufacturer with diode...b04425114 without diode...b04425130 Nominal voltage...24 V / DC ±15 % Nominal current...0.5 A ±10 % IP code...ip65 Electrical connection...pg9 Max. permitted test current...20 ma Operating temperature range: - VdS...-20 C to +50 C (-4 F to 122 F) - UL / ULC...-18 C to +27,5 C (0 F to 81,5 F) - FM...-18 C to +50 C (0 F to 122 F) - GL...-20 C to +56 C (-4 F to 132 F) Duration of connection...100 % duty ratio Actuation force at the contact with the plunger...>= 500 N Holding force in resting state...100 N to 250 N Marking part no. manufacturer, manufacturing no., manufacturing date, nominal voltage, nominal current, torque 4) The electrical connection of the release device is fitted with a diode which allows for the electric circuit and the polarity to be tested afterwards using a test current. Application Electrical actuation of extinguishing agent cylinder valves of type B0481 / B0482 (see cylinder valve, Halocarbon), type B0482 (see cylinder valve, inert gas extinguishing technology). One extinguishing agent cylinder valve each can be openend electrically by applying of the nominal voltage. Note The electrical actuation signal must be present for at least 5 seconds. Included in delivery Release device VSN 1230/200 electrical Product information release device el. part no. 887863 Not included in delivery Screw reset tool VSN 1230/200...887645 Module for monitoring MVA LÖ (optional): - Card MVA LÖ...782239 - Product information card MVA LÖ...904653 - Connector plug GDME 3013 with gasket...761094 Additionally further release devices can be installed: - Pneumatic...see ad-on part cylinder - Pneumatic/Manual...see ad-on part cylinder - Manual...see ad-on part cylinder - Tackle pneumatic/manual - marine...see ad-on part cylinder Page 20

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 electrical Dimension drawing Dimensions in mm (inch) Terminal connection Solenoid with diode Clamp 1: + pole Clamp 2: - pole Solenoid without diode Clamp 1: + pole Clamp 2: - pole 231-210_102 / AI04_2016en 2/2 Page 21

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 electrical with mech. blocking device Approvals / CE marking 1) 1) 1134-CPR-1007 1) Only in conjunction with valve B0481 / B0482 (G307011) or with valve B0480 (G302023) Part of the system approval e.g. part no. 887666: Release device electr. with mech. blocking device VSN200 see product information release device el. part no. 887863 Spare parts Pre-fabricated connection cable: - Cable release device with plug part no. 912427 - Cable release device with socket part no. 912426 Designation Part no. Weight Release device electrical with mech. blocking device with diode 3) 887666 without diode 889322 2,7 kg (5,95 lbs) 231-210_103 / AI06_2016en 1/2 Technical data Type / part no. manufacturer with diode...b04425109 without diode...b04425129 Nominal voltage...24 V / DC ±15 % Nominal current...0.5 A ±10 % IP code...ip65 Electrical connection...pg9 Max. permitted test current...20 ma Operating temperature range:...-20 C to +50 C (-4 F to 122 F) FM...-18 C to +50 C (0 F to 122 F) Duration of connection...100 % duty ratio Actuation force at the contact with the plunger...>= 500 N Holding force in resting state...100 N to 250 N Micro switches: - Voltage...48 V DC - Current...max. 1 A - IP code...ip6k7 - Change-over contact...potential-free 3) The electrical connection of the release device is fitted with a diode which allows for the electric circuit and the polarity to be tested afterwards using a test current. 3) Application Electrical actuation of extinguishing agent cylinder valves of type B0481 / B0482 (see cylinder valve, Halocarbon), type B0482 (see cylinder valve, inert gas extinguishing technology). One extinguishing agent cylinder valve each can be openend electrically by applying of the nominal voltage. Note The electrical actuation signal must be present for at least 5 seconds. Marking part no. manufacturer, manufacturing no., nominal voltage, nominal current, torque Included in delivery Release device VSN 1230/200 electrical with mech. blocking device compl. with pre-fabricated connection cable Product information release device el. part no. 887863 Not included in delivery Screw reset tool VSN 1230/200...887645 Module for monitoring MVA LÖ (optional): - Card MVA LÖ...782239 - Product information card MVA LÖ...904653 - Connector plug GDME 3013 with gasket...761094 Additionally further release device can be installed: - Manual...see ad-on part cylinder Page 22

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 electrical with mech. blocking device Dimension drawing Dimensions in mm (inch) Terminal connection Solenoid Clamp 1: + pole Clamp 2: - pole 231-210_103 / AI06_2016en 2/2 Page 23

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 pneumatic/manual Approvals / CE marking 1) 3) 1) LISTED 1134-CPR-1007 1) Only in conjunction with valve B0481 / B0482 (G307011) or with valve B0480 (G302023) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) 3) Part of the system approval part no. 887670: Release device pneumatic/manual VSN200 see product information release device pn/ma part no. 887864 Designation Part no. Weight Release device VSN 1230/200 pneumatic/manual 887670 0.57 kg (1.26 lbs) Technical data Type / part no. manufacturer...b04420065 Response pressure min....21 bar (305 psi) max....360 bar (5221 psi) Manual actuation...release force < 150 N Operating temperature range: - VdS...-20 C to +50 C (-4 F to 122 F) - UL / ULC / FM...-18 C to +50 C (0 F to 122 F) - GL......-20 C to +56 C (-4 F to 132 F) Not included in delivery Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Plug for pilot connection G1/8 VSN...888032 Additional possible use also with: Release device electrical...see ad-on part cylinder Dimension drawing Dimensions in mm (inch) Section: A - A 231-210_104 / AI03_2016en 1/1 Note The actuating pressure must be applied for at least 5 seconds. The release device is equipped with two connections for pilot pipes to allow the control gas to be passed on to additional release devices. Application Pneumatic or manual actuation of extinguishing agent cylinder valves of type B0481 / B0482 (see cylinder valve, Halocarbon), type B0482 (see cylinder valve, inert gas extinguishing technology). One extinguishing agent cylinder valve each can be openend either manually or pneumatically. Included in delivery Release device VSN 1230/200 pneumatic/manual Product information release device pn/ma part no. 887864 Page 24

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 manual Approvals 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval part no. 887668: Release device manual VSN200 see product information release device ma part no. 887989 Designation Part no. Weight Release device VSN 1230/200 manual 887668 0.41 kg (0.90 lbs) Technical data Type / part no. manufacturer...b04420100 Operating temperature range: - VdS...-20 C to +50 C (-4 F to 122 F) - UL / ULC / FM...-18 C to +50 C (0 F to 122 F) - GL......-20 C to +56 C (-4 F to 132 F) Application Manual actuation of extinguishing agent cylinder valves of type B0481 / B0482 (see cylinder valve, Halocarbon), type B0482 (see cylinder valve, inert gas extinguishing technology). One extinguishing agent cylinder valve each can be openend manual. Note The manual actuation must take place at least 5 seconds. Included in delivery Release device VSN 1230/200 manual Product information release device ma part no. 887989 Not included in delivery Additional possible use also with release device: - Electrical...see ad-on part cylinder - Electrical with mech. blocking device...see ad-on part cylinder 231-210_105 / AI03_2016en 1/1 Dimension drawing Dimensions in mm (inch) Section: A - A Page 25

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Release device VSN 1230/200 tackle pneum./manual - marine Approvals without approval Part no. 888410: Release device tackle pneum./manual VSN 200 / 1230 Sichtkontrolle und Funktionskontrolle im Rahmen der anlagenspezifischen Funktionsprobe. Designation Part no. Weight Release device VSN 1230/200 tackle pneum./manual - marine 888410 1.25 kg (2.76 lbs) 231-210_106 / AI02_2016en 1/1 Technical data Type / part no. manufacturer...b04420123 Ansteuerdruck...min. 21 bar (305 psi), max. 360 bar (5221 psi) manuelle Betätigung...Auslösekraft < 120 N Operating temperature...-20 C to +56 C (-4 F to 132 F) Application Tackle release for marine application. Pneumatic or manual actuation of extinguishing agent cylinder valves of type B0481 (see cylinder valve) and type B0482 (see cylinder valve) with a max. operating pressure of 60 bar. One extinguishing agent cylinder valve each can be openend either manually (hand-released at the valve or via tackle) or pneumatically. Note The actuating pressure must be applied for at least 5 seconds. The release device is equipped with two connections for pilot pipes to allow the control gas to be passed on to additional release devices. Dimension drawing Dimensions in mm (inch) Not included in delivery Ropes and accessories...see control device Wire rope pulley A and B...see control device Seal...354170 Seal wire DIN1367-0,5-galvanized...175567 Adapter M12x1.5 - G1/8 VSN 1230/200...887644, see ad-on part cylinder Plug for pilot connection G1/8 VSN...888032 Additional possible use also with release device: - Electrical...see ad-on part cylinder - Electrical with mech. blocking device...see ad-on part cylinder Caution: The tackle release device must only be actuaded manually if used with the electrical release device with mech. blocking device. The pneumatic actuation is not permitted in this case. Section: A - A Page 26

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Hose DN4 - VSN 1230/200 Approvals / CE marking 1) 1) G307008 LISTED 0786-CPD-30067 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887834: Hose DN4x 600 - VSN 200/1230 see product information hose DN4 part no. 887973 Designation Part no. L mm (in) Weight kg (lbs) DN4 x 600 887834 600 (23.6 0.2 (0.44) Hose - VSN 1230/200 DN4 x 1000 887835 1000 (39.37) 0.3 (0.66) DN4 x 1500 887836 1500 (59.06) 0.4 (0.88) 231-210_107 / AI01_2015en 1/1 Technical data Type...DN 4 x 600/1000/1500 - MX 200/1230 Operating medium...fk-5-1-12, HFC-227ea, nitrogen, CO 2 Nominal diameter...dn4 (0.16") Minimum bending radius...90 mm (3.54") Operating temperature range:...-40 C to +60 C (-40 F to 140 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Working pressure...160 bar (2321 psi) Test pressure...240 bar (3481 psi) Burst pressure...480 bar (6962 psi) Ferrule...PN 04 AOL conical nipple 24 with O-ring...metric (DKOL) steel galvanized yellow chrome dulled Hose connector type 3...complies with EN 12094-8 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Dimension drawing Dimensions in mm (inch) Marking Manufacturer sign, Type (MX200/1230), Batch number, Working pressure (160 bar), Approval (VdS, CE), Date of manufacture (month/year) Application To connect: - The master extinguishing agent cylinder and the pneum. release devices of other extinguishing agent cylinder - Two pneumatical release devices - The pneumatical release device and the pilot pipe of multi zone systems Included in delivery Hose DN4 VSN 1230/200 Product information hose DN4 part no. 887973 Page 27

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Adapter M12x1,5 - G1/8 VSN 1230/200 Approvals (VdS approval is not required!) 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887644: Adapter M12x1.5 - G1/8 VSN200 maintenance-free Designation Part no. Weight Adapter M12x1,5 - G1/8 VSN 1230/200 887644 0.018 kg (0.04 lbs) Technical data Operating medium...fk-5-1-12, HFC-227ea,...argon, nitrogen, CO 2, IG55, IG541 Operating temperature range:...-20 C to +56 C (-4 F to 132 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Working pressure...360 bar (5221 psi) Material...brass Application To the connection of the hose DN4 / pilot pipe with: - Valves type B0481, valves type B0482 - Valves type B0480, BAS - Release device VSN 1230/200 pneumatic/manual - Release device VSN 1230/200 pneumatic 231-210_108 / AI02_2016en 1/1 Dimension drawing Dimensions in mm (inch) Page 28

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Hose DN40 and DN50 VSN 1230/200 Approvals / CE marking 1) 1) G307009 LISTED 0786-CPD-30066 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887647: Hose DN40 VSN 200/1230 see product information hose VSN 1230/200 part no. 887849 Designation Part no. DN40 887647 DN40 NPT 914140 DN40 90 887648 Hose - VSN 1230/200 DN40 90 NPT 912075 DN50 887649 DN50 NPT 914141 DN50 90 887650 DN50 90 NPT 912076 Weight kg (lbs) 3.1 (6.83) 5.5 (12.13) 5.7 (12.66) 231-210_109 / AI02_2016en 1/2 Technical data Type DN 40 / DN50...DN 40 / DN50 MX 1230/200 DN 40 90 / DN50 90..DN 40 / DN50 MX 1230/200 90 Operating medium...fk-5-1-12, HFC-227ea, Nitrogen Nominal diameter...dn40 / DN50 (1.1/2" / 2") Minimum bending radius DN40...500 mm (19.69") DN50...630 mm (24.80") Operating temperature range:...-40 C to +60 C (-40 F to 140 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Working pressure...80 bar (1160 psi) Test pressure...120 bar (1740 psi) Burst pressure...240 bar (3481 psi) Hose connector type 1...complies with EN 12094-8 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Material / Finish Union...steel, galvanized Ferrule...steel, galvanized Flexible hose line...with fabric-inserted steel Hexagon nipple...steel, galvanized Application To connect the valve of the extinguishing agent cylinder to the nozzle pipe, the manifold, or the check valve. Marking Manufacturer sign, Type (DN.. MX200/1230), Batch number, Working pressure (80 bar), Approval (VdS, CE), Date of manufacture (month/year) Included in delivery Hose DN40/DN50 VSN 1230/200 Product information hose VSN 1230/200 part no. 887849 Page 29

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Hose DN40 and DN50 VSN 1230/200 Dimension drawing Dimensions in mm (inch) DN40 / DN50 DN40 90 / DN50 90 Hose L G1 G2 SW1 SW2 231-210_109 / AI02_2016en 2/2 3) DN40 R1.1/2 ISO 7 825 (32.48) DN40 NPT 1.1/2-11.5 NPT 1.7/8-12 UNF (B1.1) DN40 90 R1.1/2 ISO 7 450 (17.7 DN40 90 NPT 1.1/2-11.5 NPT DN50 R2 ISO 7 1000 (39.37) DN50 NPT 2-11.5 NPT 2.1/2-12 UNF (B1.1) DN50 90 R2 ISO 7 520 (20.47) DN50 90 NPT 2-11.5 NPT at the manufacture s option 60 50 Page 30 3) 70/75 65

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Connection piece DN40 and DN50 Approvals (VdS / CE is not required!) 1) 3) LISTED 1) Observe application, see below Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) 3) Part of the system approval e.g. part no. 888052: Connection piece DN40 VSN 200 / 1230 maintenance-free Designation Connection piece VSN 1230/200 Part no. DN40 888052 DN40 NPT 914154 DN50 888053 DN50 NPT 914155 Weight kg (lbs) 0.64 (1.44) 1.26 (2.77) Technical data External thread...tapered, thread seal Internal thread...un-nut thread, 74 conical hole Working pressure...60 bar (870 psi) Material...steel, galvanized coated 1) Application VdS / CE Rigid connection between the valve of the extinguishing agent cylinder and the downstream piping. UL / FM Rigid connection between the valve of the extinguishing agent cylinder and the downstream piping and/or the manifold. 231-210_110 / AI02_2016en 1/1 Dimension drawing Dimensions in mm (inch) Connection piece G1 G2 DN40 R 1.1/2 DN40 NPT 1.1/2-11.5 NPT 1.7/8-12 UN DN50 R 2 DN50 NPT 2-11.5 NPT 2.1/2-12 UN Page 31

Extinguishing technology Halocarbon agents Cylinder add-on parts Halocarbon agents Adapter check valve DN50 NPT - ISO Approvals (VdS approval is not required!) 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval Part no. 887443: Adapter check valve DN50 NPT-ISO for extinguishing agent container 52-180 litre maintenance-free Designation Part no. Weight Adapter check valve DN50 NPT-ISO 887443 0.47 kg (1.04 lbs) Technical data Working pressure...max. 60 bar (870 psi) Thread NPT...acc. to ANSI / ASME B1.20.1-NPT ISO...acc. to EN 10226 Material...steel, galvanized acc. to EN 12329 - Fe/Zn12 Application For connecting of ISO threads with NPT pipes in VSN 1230/200 systems. 231-210_111 / AI01_2015en 1/1 Dimension drawing Dimensions in mm (inch) Page 32

Extinguishing technology Halocarbon agents Manifold Halocarbon agents Check valve DN50 CR and CR NPT Approvals / CE marking 1) 1) G307012 LISTED 0786-CPD-30068 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887870: Check valve DN50 CR see product information check valve part no. 887871 Designation Part no. Weight Check valve DN50 CR 887870 CR NPT 912071 5.15 kg (11.35 lbs) 231-220_101 / AI01_2015en 1/1 Technical data Type...MX-CR, MX-CR NPT Medium...FK-5-1-12, HFC-227ea, nitrogen Nominal diameter...dn50 Working pressure...60 bar (870 psi) Test pressure...90 bar (1305 psi) Opening pressure... 3 bar (43.05 psi) Leakage rate at 20 bar (290 psi)... 20 bubbles / 1 min Operating temperature range:...-20 C to +50 C (-4 F to 122 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Check valve...complies with EN 12094-13 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Material / Surface Housing...steel, galvanized Internal components...stainless steel Spring...stainless steel Seal...NBR Dimension drawing Dimensions in mm (inch) Application When using more than one cylinder at a conjointly pipework a check valve is to be used with each cylinder between cylinder and pipework or manifold. This prevents that extinguishant gets to not operated valves or escapes unaimed with dismounted cylinders. Marking manufacturer/year (MX/xx), type, nominal diameter (DN50), working pressure (PB 60), approval sign (VdS, CE), serial number Included in delivery Check valve CR / CR NPT Product information check valve part no. 887871 Check valve CR Page 33 G 1 G 2 Rp 2 (EN 10226) Rc 2 (ISO 7) CR NPT 2-11.5-NPT 2-11.5-NPT

Extinguishing technology Halocarbon agents Cylinder rack Halocarbon agents Clamp extinguishing agent cylinder VSN 1230/200 Approvals (VdS approval is not required!) 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 888014: Clamp ext. agent cylinder D=229mm maintenance-free Clamp extinguishing agent Clamp for steel cylinder Weight Part no. cylinder drawn welded kg (lbs) D=229mm 888014 22 l / 40 l (ø229 mm / ø9") - 1.26 (2.8) D=254mm 923157-22 l / 52 l (ø254 mm / ø10") 1.39 (3.1) D=267mm 887628 80 l (ø267 mm / ø10.51") - 1.46 (3. D=316mm 887988 100 l (ø316 mm / ø12.44") - 1.69 (3.7) D=406mm 887639 80l/140 l / 180 l (ø406 mm / ø16") 106 l / 147 l / 180 l (ø406 mm / ø16") 2.08 (4.6) Technical data Material...strip EN 10048-4,0 x 60...steel EN 10025-2-S235JR Finish...matt-finished or powder-coated...ral 9011 graphite black Not included in delivery Fastening material Dimension drawing Dimensions in mm (inch) 231-240_101 / AI03_2016en 1/1 Clamp R B D=229mm 117 (4.60) 111 (4.37) D=254mm 129 (5.08) 124 (4.88) D=267mm 136 (5.35) 130 (5.1 D=316mm 160 (6.30) 155 (6.10) D=406mm 205 (8.07) 200 (7.87) Page 34

Extinguishing technology CO 2 HP CO 2 Manifold Manifold selector valve DN65/80/100 complete pneumatic, CO 2 / inert gas (CF) / VSN 1230/200 Approvals / CE marking 1) 1), 3) 1) 1) G397004 LISTED 0786-CPD-30005 1) Approvals and CE for selector valve only Listed system covered by UL-File EX6388 (CO 2 ) and covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) see operating instruction selector valve BV, part no. 886269 Spare parts Manual release lever, 600 mm (23.62") long part no. 823976 Ordering hints Manifolds selctor valve DN65/80/100 pneumatic are manufactured individually for each contract. Use form C10.40.80 (see documentation special extinguishing systems) for ordering. Primer coated or powder coated manifolds are to be ordered via order number 40 0015. Galvanized manifolds are to be ordered via order number 40 0016. 214-020_101 / AI02_2015en 1/2 Technical data Operating medium...co 2, argon (IG-01), nitrogen (IG-100)...IG-55, IG-541, FK-5-1-12, HFC-227ea Working pressure / test pressure: - Manifold, selector valves...140 bar / 210 bar...(2030 psi / 3045 psi) - Pneumatic release device...20 to 140 bar / 210 bar...(290 to 2030 psi / 3045 psi) Flow characteristics (high pressure selector valve): - DN65...equivalent length 0.43 m (16.93") - DN80...equivalent length 0.55 m (21.65") - DN100...equivalent length 0.67 m (26.38") Temperature range...-20 C to +50 C (-4 F to 122 F) Actuation...by 24 V DC Application The manifold selector valve BV DN65/80/100 pneumatic is used in accordance with documentation of special extinguishing systems in: - fixed CO 2 - high pressure fire extinguishing systems - argon-, nitrogen, IG-55-, IG-541 extinguishing systems with Constant Flow (CF) - VSN 1230/200 fire extinguishing systems, maximum number of selector valves: 15. In case of fire the selector valve DN65/80/100 is used for flooding selected extinguishing zones. Functional description After a fire has been detected in one of the extinguishing zones of a multi- zone system, the appropriate selector valve opens and the extinguishing agent flows into the relevant downstream pipe work of the extinguishing zone. For recommissioning the selector valve has to be closed manually by using the reset lever. The right position of selector valve may monitored by one or two limit switches. Main components Ball valves DN65-100...see selector valve accessories Release cylinder section valve...see selector valve accessories Safety valve, depending from operating medium: - Valve G1/2-140 bar (CO 2 )...see safety valve - Valve G1/2-66 bar (inert gas / MX 1230/200 )...see safety valve Limit switch type US 432y and US 434y...see monitoring device Manifold rack - left...817728 Manifold rack - right...822583 Included in delivery Manifold selector valve complete, pneumatic Operating instruction selector valve BV part no. 886269 Page 35

Extinguishing technology CO 2 HP CO 2 Manifold Manifold selector valve DN65/80/100 complete pneumatic, CO 2 / inert gas (CF) / VSN 1230/200 Dimension drawing Dimensions in mm (inch) View: A - A DN L h 65 350 (13.78) 203 / 270 (7.99 / 10.63) 80 350 (13.78) 200 / 267 (7.87 / 10.51) 100 450 (17.7 250 (9.84) * * The longer dimensions are valid for manifolds with min. one selector valve DN100. 214-020_101 / AI02_2015en 2/2 Page 36

Inert gas extinguishing technology Selector valve Selector valve MX-BV DN25-50 PB235, CO 2 / IG / VSN 1230/200 Approvals / CE marking 1) 1) G393001 LISTED 0786-CPD-30004 1) Listed system covered by UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) Part of the system approval (VSN 200 and VSN 1230) e.g. part no. 885189: Selector valve BV 25 PB235 see operating instruction selector valve BV DN25/40/50 part no. 886333 Designation Part no. Weight kg (lbs) Selector valve BV DN25 885189 17.0 (37.5) DN40 885191 20.5 (45. DN50 885192 24.8 (54.7) DN25 - NPT 912052 17.0 (37.5) DN40 - NPT 912053 20.5 (45. DN50 -NPT 912054 24.8 (54.7) 211-331_102 / AI03_2016en 1/2 Technical data Type...MX-BV Operating medium...co 2, argon (IG-01), nitrogen (IG-100),...IG-55, IG-541, HFC-227ea, FK-5-1-12 Temperature range...-20 C to +50 C (-4 F to +122 F) Working pressure: - manifold, selector valves...235 bar (3408 psi) - pneumatic release device...20 to 140 bar (290 to 2030 psi) Test pressure: - manifold, selector valves...353 bar (5120 psi) - pneumatic release device...210 bar (3045 psi) Flow characteristics (selector valve): - DN25...equivalent length 0.18 m (0.59 ft) - DN40...equivalent length 0.27 m (0.89 ft) - DN50...equivalent length 0.37 m (1.21 ft) Test certificate...in acc. with EN 10204-3.1 (pressure test) Selector valve...complies with EN 12094-5 CE conformity...acc. to Construction Products Regulation (EU)...No 305/2011 Product sheets also applying Cylinder D55-H106...see selector valve accessories Ball valves BV DN25, DN40 and DN50...see selector valve accessories Marking Type (MX-BV..), VdS no. (G393001), MX test no. additonal marking for selector valve with NPT thread: thread (NPT) Application The selector valve BV DN 25/40/50 is used in accordance with the documentation of special extinguishing systems in fixed CO 2, argon, nitrogen, IG-55 and IG-541 high pressure fire extinguishing systems or VSN 1230/200 fire systems respectively. In case of fire the selector valve DN 25/40/50 is used for flooding selected extinguishing zones. Functional description After a fire has been detected in one of the extinguishing zones of a multi- zone system, the appropriate selector valve opens. The extinguishing agent, CO 2, argon, nitrogen, IG-55, IG-541 or VSN 1230/200, flows into the relevant downstream pipe work of the extinguishing zone. A safety valve is mounted on the manifold in order to release any excessive pressure. For recommissioning, the selector valve has to be closed manually by using the reset hand lever. The right position of selector valve may monitored by one or two limit switches. Not included in delivery Limit switch US 432y, 2 contacts...724420, see monitoring device Manual release lever BV <DN65, 497 mm long...860346 Page 37

Inert gas extinguishing technology Selector valve Selector valve BV DN25-50 CO 2 / IG / VSN 1230/200 Dimension drawing Dimensions in mm (inch) R L2 L1 DN R L 1 ±15 (0.6) L 2 ±15 (0.6) 25 R1 - DIN 2999 810 (31.9) 579 (22.8) 40 R1.1/2 - DIN 2999 795 (31.3) 575 (22.6) 50 R2 - DIN 2999 805 (31.7) 584 (23.0) 25 - NPT 1-11.5 NPT 810 (31.9) 579 (22.8) 40 - NPT 1.1/2-11.5 NPT 795 (31.3) 575 (22.6) 50 - NPT 2-11.5 NPT 805 (31.7) 584 (23.0) 211-331_102 / AI03_2016en 2/2 Page 38

Inert gas extinguishing technology Selector valve accessories Push-button selector valve Approvals 1) 3) LISTED 1) Part of the system approval VSN 1230 (S31401 und VSN 200 (S313007) Listed system covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) part no. 822674: Push-button selector valve see product information push-button selector valve part no. 886501 Designation Part no. Weight Push-button selector valve 822674 0.16 kg (0.35 lbs) Technical data Operating medium...co 2 - gaseous, argon (IG-01),...nitrogen (IG-100), IG-55, IG-541, HFC-227ea, FK-5-1-12 Working pressure...2 to 365 bar (29 to 5294 psi) Temperature range...-20 C to +50 C (-4 F to 122 F) Thread connection...for precision-drawn steel pipe 10 x 1 Position of device...as desired Dimension drawing Dimensions in mm (inch) 211-334_104 / AI02_2015en 1/1 Material / Surface Knurled screw...brass, nickel plated Non-return valve...steel, galvanized Application The push-button is used in accordance with the project-specific system schema in fixed fire extinguishing systems. The push-button is used to manually vent pilot lines. This ensures that the pilot lines can be pressure-relieved without having to dismount them. Included in delivery Push-button selector valve Product information push-button selector valve part no. 886501 Page 39

Extinguishing technology Halocarbon agents Safety valve Halocarbon agents Safety valve G1/2-66 bar Approvals 1) 3) LISTED 1) Part of the system approval: - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) 3) Part of the system approval part no. 888007: Safety valve G1/2-66bar maintenance-free Designation Part no. Weight Safety valve G1/2-66 bar 888007 1.2 kg (2.65 lbs) 231-341_101 / AI02_2016en 1/1 Technical data Type...4373.2602 Medium...FK-5-1-12, HFC-227ea, argon, nitrogen Response pressure max...66 bar (957 psi) at +50 C (122 F) Operating temperature range:...-20 C to +50 C (-4 F to 122 F) UL / ULC / FM...-18 C to +50 C (0 F to 122 F) Thread...acc. to ISO 228 Metal seal...-270 C to +280 C (-454 F to 536 F) Test certificate...en 10204-3.1 (response pressure) Position of device...vertical Safety valve according to pressure equipment directive 97/23/EC category IV. Application Manifold selector valve for VSN 1230/200 systems and for Constant Flow systems. Dimension drawing Dimensions in mm (inch) Page 40

Extinguishing technology CO 2 HP Safety valve CO 2 Safety valve G1/2-140 bar Approvals 1) 3) LISTED 1) Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) / HD-2 (S398011) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) part no. 886282: Safety valve G1/2-140bar maintenance-free Designation Part no. Weight Safety valve G1/2-140 bar 886282 1.4 kg (3.09 lbs) 214-341_101 / AI03_2016en 1/1 Technical data Type...4373.2612 Operating medium...co 2 - gaseous Response pressure...140 bar (2030 psi) at +50 C (122 F) Flow rate...approx. 3014 Nm³/h, gaseous Thread...in acc. to ISO 228 Metal seal...-270 C to +220 C (-454 F to 428 F) Position of device...vertical Safety valve according to pressure equipment directive 97/23/EC category IV Application - Upstream piping in stationary CO 2 fire extinguishing systems - Pilot pipe in stationary CO 2, argon and nitrogen fire extinguishing systems and/or in VSN 1230/200 fire extinguishing systems Dimension drawing Dimensions in mm (inch) Page 41

Extinguishing technology Halocarbon agents Nozzle Halocarbon agents Nozzles type CD, VSN 200 Approvals 1), 1),, 3) G307010 LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Version A and B without UL / ULC / FM approval 3) Part of the system approval e.g. part no. 887759: Nozzle CD 1/2 x A...-Ms see product information nozzles CD part no. 887869 231-360_102 / AI02_2016en 1/2 ød Nozzle Version 4) Part no. ±0,1 mm (±0.0039 inch) Weight approx. min. max. Ms XCrNi mm (inch) mm (inch) kg (lbs) A 887759 887781 CD 1/2 CD 1/2 NPT CD 1 CD 1 NPT CD 1.1/2 CD 1.1/2 NPT B 887760 887782 C 887761 887783 4) Version (nozzle bore hole layout) see on page 2 3 (0.1181) Order informations For manufacturing, the nozzle bore diameter ød must be stated within the permitted limits in 1/10 mm gradations. 6 (0.236 D 887763 887784 5 (0.1969) A 889033 889046 B 889034 889048 C 889036 889049 3 (0.1181) 6 (0.236 D 889037 889050 5 (0.1969) A 887768 887790 B 887769 887791 C 887770 887792 3 (0.1181) 11 (0.4331) D 887771 887793 10 (0.3937) A 889038 889051 B 889039 889052 C 889040 889053 3 (0.1181) 11 (0.4331) D 889041 889054 10 (0.3937) A 887777 887799 B 887778 887800 C 887779 887801 3 (0.1181) 18 (0.7087) D 887780 887802 16 (0.6299) A 889042 889055 B 889043 889056 3 (0.1181) 18 (0.7087) C 889044 889057 D 889045 889058 16 (0.6299) Page 42 0.2 (0.4) 0.2 (0.4) 0.4 (0.9) 0.4 (0.9) 0.6 (1.3) 0.6 (1.3)

Extinguishing technology Halocarbon agents Nozzle Halocarbon agents Nozzles type CD, VSN 200 Technical data Type...CD Medium...HFC-227ea with nitrogen pressure charging Connection thread Rp...acc. to EN 10226 NPT...acc. to ANSI/ASME B1.20.1 Gradation of the bore hole diameters ød...in 0.1 mm steps Coverage area, corage height...see design manual Working pressure:...min. 9.6 bar (139 psi), max. 60 bar (870 psi) UL / ULC / FM...min. 9 bar (131 psi), max. 60 bar (870 psi) Minimum temperature...-20 C (-4 F) UL / ULC / FM...-18 C (0 F) Required storage pressure in extinguishing agent container dependent on system at 21 C (70 F):...25 bar (360 psi), 42 bar (610 psi) oder 50 bar (725 psi) Nozzle body Ms...brass XCrNi...stainless steel Installation position...acc. to product information Note The 180 nozzle spray the extinguishing agent in a semicircle and the 360 in a full circle around the nozzle. The dimensioning of the nozzle bore diameter takes place specifically for the fire extinguishing system using a calculation program suitable for the extinguishing agent. Version A und B are for special use. Using the DesignManager there are other limitations in the minimal and maximal nozzle bore diameters. Details see DesignManager calculation. Application The nozzles CD are used as room protection nozzles in accordance with system approval in VSN 200 fire extinguishing systems using the extinguishing agent HFC-227ea (Heptafluorpropane). They are used to supply the extinguishing agent within the calculated flow time and distribute it evenly throughout the extinguishing area. Marking manufacturer / year date (MX/xx) or manufacturer / year date / thread (MX/xx/NPT), type (CD), version and bore diameter d (y x,x), approval sign (VdS), serial number Included in delivery nozzles type CD, VSN 200 product information nozzles CD part no. 887869 Not included in delivery Fitting tool: pin-type face spanner 20x2.9...88 7837 (for nozzles CD 1/2" and 1") pin-type face spanner 35x3.9...88 7838 (for nozzles CD 1.1/2") Nozzle bore hole layout 231-360_102 / AI02_2016en 2/2 Dimension drawing Dimensions in mm (inch) Version: A 1 Bore, 180 Nozzle Version: B 2 Bores, 360 Nozzle Nozzle Thread Rp / NPT Version: C 3 Bores, 180 Nozzle CD 1/2 1 1.1/2 Version: D 4 Bores, 360 Nozzle ød Version ±0,1 (±0.0039) L ød min. max. A, B, C 6 (0.236 55 (2.17) 28 (1.10) D 5 (0.1969) A, B, C 11 (0.4331) 3 (0.1181) 65 (2.56) 40 (1.58) D 10 (0.3937) A, B, C 18 (0.7087) 85 (3.35) 55 (2.17) D 16 (0.6299) Page 43

Extinguishing technology Halocarbon agents Nozzle Halocarbon agents Adapter hose DN40, DN50 ISO - NPT Approvals (VdS approval is not required!) 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 887450: Adapter hose DN40 ISO-NPT maintenance-free Designation Part no. Weight kg (lbs) Adapter hose DN40 ISO-NPT DN40 887450 0.3 (0.66) DN50 887451 0.4 (0.88) Technical data Max. working pressure...60 bar (870 psi) Thread NPT...acc. to ANSI / ASME B1.20.1-NPT ISO...acc. to EN 10226 Material...steel, galvanized acc. to EN 12329 - Fe/Zn12 Application To connect VSN 1230/200 system parts with ISO thread to NPT pipes. 231-360_103 / AI01_2015en 1/1 Dimension drawing Dimensions in mm (inch) Adapter Rp NPT ød 1 ød 2 L L 1 L 2 L 3 57 41,5 60 20 25 30 DN40 1.1/2 1.1/2-11,5 (2.24) (1.63) (2.36) (0.79) (0.98) (1.18) DN50 2 2-11,5 69 (2.7 51 (2.01) 65 (2.56) Page 44 25 (0.98) 30 (1.18) 30 (1.18)

Inert gas extinguishing technology Alarm device Makrofon Approvals / CE marking 1) 1) G310017 LISTED 0786-CPD-30126 1) Listed system covered by UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 und VSN 1230) Part of the system approval (VSN 200 and VSN 1230) part no. 860050: Makrofon see product information makrofon part no. 871828 Spare parts Union GE 6-PSR-ED A3...125578 Bracket (large)...888619 2x Hex. screw DIN933 M6X16-8.8 gal Zn...206261 2x Spring lock washer DIN128-A6-A4...905383 2x Hex. nut DIN934-M6-gal Zn...249230 Designation Part no. Weight Makrofon 860050 1.15 kg (2.54 lbs) 211-410_101 / AI02_2015en 1/2 Technical data Operating medium...co 2, gaseous Temperature range...-20 to +300 C (-4 to +572 F) Working pressure...8 bar to 70 bar (116 psi to 1015 psi)...overpressure-proof up to 140 bar (2030 psi) Consumption at constant 70 bar...co 2, 147 g/min Consumption by using a CO 2 pilot cylinder (falling pressure)...approx. 2350 g / 30 min, approx. 2950 g / 60 min Connection...for precision drawn steel pipe 6 x 1 Installation position...sound outlet points downward Makrofon...complies with EN 12094-12 CE conformity...acc. to Construction Products Regulation (EU)...No 305/2011 Application The makrofon is a pneumatically operated acoustic alarm device for the use in stationary gas extinguishing systems accordance with the system approval. This alarm device warns persons being present prior to flooding of the area with extinguishing gas by a loud sound and constant frequency. Caution: At operating pressure the makrofon generates at a distance of 1 m a sound level which may cause hearing disorder. Note For indoor use only Not included in delivery Clamping bolt for wall mounting silencer makrofon...877120, see alarm device Included in delivery Makrofon with bracket (small and large) Product information makrofon part no. 871828 Page 45

Inert gas extinguishing technology Alarm device Makrofon A-weighted sound pressure level over the pressure range without silencer with silencer sound pressure level [db(a)] sound pressure level [db(a)] pressure [bar] pressure [bar] Note: The above shown curves were determined in the laboratory. Due to the influencing factors given in situ, the real values may deviate from the curves. Dimension drawing Dimensions in mm (inch) Makrofon dimensions and bracket (large) dimensions 211-410_101 / AI02_2015en 2/2 material: stainless steel Page 46

Inert gas extinguishing technology Alarm device Silencer makrofon MX-1 Approvals no approval required part no. 877120: Schalldämpfer Makrofon MX-1 maintenance-free Designation Part no. Weight Silencer makrofon MX-1 877120 0.12 kg (0.26 lbs) Technical data Material...stainless steel Dimension drawing Dimensions in mm (inch) 211-410_002 / AI00_2015en 1/1 Page 47

Inert gas extinguishing technology Control device Release device EM Approvals 1) 3) LISTED 1) Part of the system approval (release device 24 V DC only): - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) Listed system for release device 24 V DC only covered by UL-File EX6388 (CO 2 ) and covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) release device EM 24 V DC only e.g. part no. 885738: Release device EM 24V-DC see operating instruction release device EM, part no. 885744 Designation Part no. Weight Release device EM 24 V DC 885738 230 V AC 885739 1.8 kg (4.0 lbs) 4) Release device EM 230 V AC without approval 211-420_103 / AI04_2017en 1/1 Technical data Temperature range Solenoid......-20 C to +50 C (-4 F to 122 F) Magnetic force...44 N Switching duration...100 % Voltage...24 V DC (18-28 V DC) / 230 V AC Current...1.04 A / 0.12 A Stroke...9 mm (0.35") IP code...ip 54 (by accordingly covering of the pull and pressure rod side) Application The release device EM may be used only in accordance with the documentation of special extinguishing systems in fixed CO 2, argon, nitrogen, IG-55 and IG-541fire extinguishing systems. It is used for electrical release of lever valve. Dimension drawing Dimensions in mm (inch) Functional description The solenoid of the release device EM is triggered by an electrical signal whereby the spring loaded release bolt is unlocked. The release bolt pushes against the lever of the valve, which turns around by approx. 90. Included in delivery Release device EM with fastening material Operating instruction release device EM part no. 885744 Additionally for release device EM 24 V DC: - Card MVA LÖ...782239 - Product information card MVA LÖ...904653 Not included in delivery Reset tool for release device EM...885530, see control device Bracket for reset tool release device EM...886367, see control device Monitoring for release device EM...885740, see monitoring device Page 48

Inert gas extinguishing technology Control device Safety device malfunction pressure SFD DN4 Approvals 1) 3) LISTED 1) Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) / HD-2 (S398011) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - CO 2 extinguishing system ND-1 (S39801, electrical release - CO 2 extinguishing system ND-2 (S398013), non-electrical release - Oxeo Nitrogen low pressure extinguishing system (S310016) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) part no. 885869: Safety device malfunction pressure SFD DN4 see Product information safety device malfunction pressure SFD DN4 part no. 885867 Designation Part no. Weight Safety device malfunction pressure SFD DN4 885869 0.15 kg (0.33 lbs) 211-420_108 / AI03_2016en 1/2 Technical data Operating medium...argon (IG-01), nitrogen (IG-100),...IG-55, IG-541, carbon dioxide (CO 2 ) / gaseous,...hfc 227 ea, FK 5-1-12 Working pressure... 140 bar (2030 psi) Test pressure... 210 bar (3045 psi) Temperature range...-20 C to +50 C (-4 F to +122 F) Connection DN4...pipe 6 x 1 Installation position...vertical, see page 2 Material / Surface Housing...brass Gasket...NBR Ball...1.4301 Application The safety device malfunction pressure is used in accordance with the project-specific system schema in fixed fire extinguishing systems. The safety device malfunction pressure is intended only for releasing small amounts of leakage in pneumatic pilot lines. The safety device closes automatically on higher pressure. Note The safety device malfunction pressure has to be installed upright into the pilot lines as well an installation nearby a potential leakage (e.g. pilot gas tank) is recommended. Included in delivery Safety device malfunction pressure SFD DN4 Product information safety device malfunction pressure SFD DN4 part no. 885867 Not included in delivery Unions and pipe for extinguishing pipework and pilot pipes see page 2/2 Dimension drawing Dimensions in mm (inch) Page 49

Inert gas extinguishing technology Control device Safety device malfunction pressure SFD DN4 Installations examples Not included in delivery Item 1: Union EVT 06 S A3C...part no. 886406 Item 2: Pipe 6 x 1 mm (0.236 x 0.039 inch)...part no. 823563 Item 3: Union T 6-PLA3C...part no. 125633 Item 4: Union GZR06L/06SCF...part no. 910650 Item 5: Union EW 06 L CF...part no. 889145 Item 6: Adapter M12x1.5 G1/8...part no. 887644 (for release device pneumatic or pneumatic/manual) 211-420_108 / AI03_2016en 2/2 Page 50

Extinguishing technology Halocarbon agents Control device Accessories connection pressure relief SFD DN4 Approvals 1) 1) VdS applies to safety device malfunction pressure SFD DN4 Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) / HD-2 (S398011) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - CO 2 extinguishing system ND-1 (S39801, electrical release - CO 2 extinguishing system ND-2 (S398013), non-electrical release - Oxeo Nitrogen low pressure extinguishing system (S310016) - VSN 1230 (S31401 / VSN 200 (S313007) UL applies to push-button selector valve Listed system covered by UL-File EX26532 (Ar) part no. 889320: Accessories connection pressure relief see product information accessories connection pressure relief (English) part no. 912454 Designation Part no. Weight Accessories connection pressure relief SFD DN4 889320 0.57 kg (1.26 lbs) 231-420_101 / AI02_2016en 1/2 Technical data Operating medium...argon (IG-01), nitrogen (IG-100),...IG-55, IG-541, carbon dioxide (CO 2 ) / gaseous,...hfc 227 ea, FK 5-1-12 Working pressure...140 bar (2030 psi) Temperature range...-20 C to +50 C (-4 F to +122 F) Installation position...vertical, see page 2 Material / Surface Housing...brass / steel Gasket...NBR Ball (safety device malfunction pressure SFD DN4)...1.4301 Application The pressure relief is used in accordance with the projectspecific system schema in fixed fire extinguishing systems. Intended use of the single components: - The safety device malfunction pressure is intended only for releasing small amounts of leakage in pneumatic pilot lines. The safety device closes automatically on higher pressure. - The push-button selector valve is intended only to manually vent of pneumatic pilot lines. Note The safety device malfunction pressure has to be installed upright into the pilot lines as well an installation nearby a potential leakage (e.g. pilot gas tank) is recommended. Included in delivery Accessories connection pressure relief SFD DN4 consisting of: - Safety device malfunct.pressure SFD DN4...885869, see control device - Push-button selector valve...822674, see control device - Union EVL 6-PL A3C...786956 - Adapter M12x1,5 - G1/8 MX200...887644 - Union GZR06L/06SCF...910650 - Union GZR10/06LCF...910651 - Union EW06LCF...889145 - Product information accessories connection pressure relief part no. 910653 Page 51

Extinguishing technology Halocarbon agents Control device Accessories connection pressure relief SFD DN4 Accessories connection pressure relief (individual parts) 1 1 3 3 4 5 2 6 7 5 Item 1 Safety device malfunction pressure SFD DN4 Item 2 Push-button selector valve Item 3 Union GZR06L/06SCF Item 4 Union EW06LCF Item 5 Adapter M12x1,5 G1/8 (for release device pneumatic or pneumatic/manual) Item 6 Union GZR10/06LCF Item 7 Union EVL 6-PLA3C Accessories connection pressure relief (assembled) 231-420_101 / AI02_2016en 2/2 1 The version with the push-button selector valve (item 1) is used to manually vent pilot lines in combination with a pneumatic release device (PAE). Example of application Page 52

Inert gas extinguishing technology Control device Pilot control manifold CO 2 - DN15 Approvals 1) 3) LISTED 1) Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - CO 2 extinguishing system ND-1 (S39801, electrical release - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) parts will be delivered individually e.g. part no. 830778: Pilot control manifold CO 2 - DN15-2 Branches Part no. Weight approx. kg (lbs) see technical description pilot control manifold DN15 part no. 876772 Branches Part no. Weight approx. kg (lbs) 2 830778 9.7 (21.4) 9 830912 39.3 (86.6) 3 830791 14.2 (31.3) 10 830936 42.7 (94.1) 4 830808 17.7 (39.0) 11 830950 47.3 (104.3) 5 830833 22.2 (48.9) 12 830973 51.8 (114. 6 830857 26.8 (59.1) 13 830985 55.2 (121.7) 7 830870 30.2 (66.6) 14 830997 59.8 (131.8) 8 830894 34.7 (76.5) 15 834115 64.3 (141.8) 211-420_110 / AI04_2017en 1/2 Technical data Operating medium...carbon dioxide (CO 2 ) Working pressure...140 bar (2030 psi) Test pressure...235 bar (3408 psi) Temperature range...-20 C to +50 C (-4 F to +122 F) Connected voltage...24 V DC Product sheets also applying Safety valve G1/2-140 bar...886282, see safety valve Argon cylinder valve K85-20.0-S49...871014, see cylinder valve Lever - cylinder valve...885603, see control device Release device EM 24 V DC...885738, see control device Application The pilot control manifold DN 15 may only be used in accordance with system approval in stationary CO 2, argon, nitrogen, IG-55, IG-541 and VSN 1230/200 fire extinguishing systems. It is used as a pilot control valve in the pneumatic activation of fire extinguishing systems or as a CO 2 extinguishing agent manifold for small design quantity, for example local protection for electrical devices. Functional description The release device EM is triggered by an electrical activation. The release bolt of the release device is released and actuates the valve lever, which turns around by approx. 90 and opens the valve. The safety valve prevents an undue exceeding of the operating pressure. Included in delivery Pilot control manifold CO 2 - DN15 (not pre-assembled) Techn. description pilot control manifold DN15 part no. 876772 Installation drawing pilot control manifold DN15 part no. 827301 Not included in delivery Connection to valve: Adapter for connecting CO 2 - Ermeto DN4...827325 DN8...855425 Monitoring for release device EM...885740, see monitoring device Page 53

Inert gas extinguishing technology Control device Pilot control manifold CO 2 - DN15 Dimension drawing Dimensions in mm (inch) View: B ~280 (~11.0) A ~170 (~6.7) Union GE 15-PLR-ED A B ~120 (~4.7) 150 (5.9) ~130 (~5.1) 150 (5.9) 150 (5.9) L Section: A-A Branches L 211-420_110 / AI04_2017en 2/2 ~260 (~10. 2 340 (13.4) 3 490 (19.3) 4 620 (24.4) 5 770 (30.3) ~230 (~9.1) 6 920 (36. W21.8x1/14"-DIN477 7 1050 (41.3) 8 1200 (47. G1/2 9 1350 (53. DIN ISO 228 10 1480 (58.3) 11 1630 (64. 12 1780 (70.1) 13 1910 (75. 14 2060 (81.1) 15 2210 (87.0) Page 54

Inert gas extinguishing technology Control device Disable device complete Approvals / CE marking 1) 1) G301010 LISTED 0786-CPD-30007 1) Listed system covered by UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) Part of the system approval (VSN 200 and VSN 1230) part no. 878070: Disable device complete see product information disable device complete part no. 878069 Designation Part no. Weight Disable device complete 878070 0.8 kg (1.8 lbs) 211-420_112 / AI03_2016en 1/2 Technical data Operating medium...co 2, argon (IG-01), nitrogen (IG-100),...IG-55, IG-541 Working pressure... 140 bar (2030 psi) Nominal diameter...dn6 Connection threads...m12 x 1.5 Temperature range...-30 C to +80 C Connection...cone for 6 mm steel pipe Disable device...complies with EN 12094-6 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Application The disable device may only be used in accordance with system approval in stationary CO 2, argon, nitrogen, IG-55, IG-541 or in VSN 1230/200 fire extinguishing systems. The disable device is corresponding to the german rules BGR 134 of the workmen compensations board, a non electrical disable device to lock Argotec extinguishing fire system. It prevents the extinguishing agent to be released in the extinguishing area. For repair or maintenance work in the protected area, when the system can be activated unintentionally or people can not leave the area within the pre - warning time, the extinguishing system must be blocked. Functional description The ball valve enables the pilot pipe to be shut off. At the same time the pilot pipe is vented to preclude an uncontrolled rise of pressure. When the system is in normal operation the ball valve is locked with a padlock in the eyelet so that the marking Betrieb (operation) is visible. To block the pilot pipe, the padlock is removed and the handle of the ball valve turned clockwise to the stop. The ball valve is then locked in position by fastening the padlock in the eyelet so that the marking Blockiert (isolation) is visible. The resetting of the ready status is carried out in reversed order so that the marking "Betrieb" (operating) is visible again. For monitoring the operating and isolation position a limit switch for every position must be mounted (not included in delivery). Included in delivery Disable device type DN6...885375 Padlock 635/40...131777 Retainer shuttle valve...873497 2x Cap nut M 6-L A3C...173959 2x Progressive ring DPR 6-L/S-A3D...208208 Product information disable device complete...878069 as well as fastening material Not included in delivery The following must be ordered separately for monitoring of each ball valve position: Limit switch type ZS 256-11Z...828482, see monitoring device 2x Cheese-head screw DIN84-M4x25-brass...106745 2x Washer DIN125-B 4,3 brass...109734 Page 55

Inert gas extinguishing technology Control device Disable device complete Dimension drawing Dimensions in mm (inch) P&ID symbol A = Output B = Venting P = Input 211-420_112 / AI03_2016en 2/2 Page 56

Inert gas extinguishing technology Control device Shuttle non-return valves WRV DN4 and DN8 Approvals / CE marking 1) 1) G303002 LISTED 0786-CPD-30008 1) Listed system covered by UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) Part of the system approval (VSN 200 and VSN 1230) e.g. part no. 886247: Shuttle non-return valve WRV 4 see product information shuttle non-return valve part no. 886246 DN Part no. For pipe Weight 4 886247 6 x 1 0.25 kg (0.55 lbs) 8 886248 10 x 1 0.24 kg (0.53 lbs) Technical data Operating medium...carbon dioxide (CO 2 ) - gaseous...argon (IG-01), nitrogen (IG-100), IG-55, IG-541 Working pressure...2 to 140 bar (29 to 2030 psi) Test pressure...210 bar (3045 psi) Rate of pressure rise...min. 3 bar/s (43,5 psi/s) Installation position...feedings only horizontal Shuttle non-return valves...complies with EN 12094-13 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Application The shuttle non-return valve is used in fixed high pressure CO 2, argon, nitrogen, IG-55 and IG-541 fire extinguishing systems or in VSN 1230/200 fire extinguishing systems according the system approval. Functional description The shuttle non-return valve for the pneumatic control allows the differential directly control of pneumatic units with two pressure sources. 211-420_113 / AI03_2016en 1/1 Material / Surface Housing...aluminium Gasket...NBR Ball...stainless steel Dimension drawing Dimensions in mm (inch) Included in delivery Shuttle non-return valves WRV Product information shuttle non-return valve part no. 886246 Page 57

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover Approvals 1) 1) LISTED Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 885335: PAE-CO 2 -EM-4kg compl. see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. Weight approx. Pneumatic release device PAE - CO 2 electrical with protective cover 4 kg 885335 28 kg (62 lbs) 8 kg 885341 38 kg (84 lbs) 214-420_103 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Amount filled...4 kg (8.82 lbs) or 8 kg (17.64 lbs) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder EU...see cylinder filled Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The release device PAE has a protecting cover to protect against unintentional contact. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Included in delivery PAE - CO 2 EM 4 kg...885334 8 kg...885338 Protective cover PAE...885322 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 58

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover Dimension drawing Dimensions in mm (inch) PAE h approx. 4 kg 925 (36.4) 8 kg 1335 (52.6) 214-420_103 / AI03_2016en 2/2 Page 59

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve Approvals 1) 1) LISTED Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 885337: PAE-CO 2 -EM-4kg reserve compl. see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. Weight approx. Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve 4 kg 885337 47 kg (104 lbs) 8 kg 885343 67 kg (148 lbs) 214-420_104 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Amount filled...2x 4 kg (2x 8.82 lbs) or 2x 8 kg (2x 17.64 lbs) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder EU...see cylinder filled Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The release device PAE has a reserve cylinder and a protecting cover to protect against unintentional contact. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Included in delivery PAE - CO 2 EM reserve 4 kg...885336 8 kg...885342 Protective cover PAE...885322 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 60

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve Dimension drawing Dimensions in mm (inch) PAE h approx. 4 kg 925 (36.4) 8 kg 1335 (52.6) 214-420_104 / AI03_2016en 2/2 Page 61

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover Approvals 1) 1) LISTED Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 885334: PAE-CO 2 -EM-4kg see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. Weight approx. Pneumatic release device PAE - CO 2 electrical without protective cover 4 kg 885334 24 kg (53 lbs) 8 kg 885338 34 kg (75 lbs) 214-420_105 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Amount filled...4 kg (8.82 lbs) or 8 kg (17.64 lbs) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder EU...see cylinder filled Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Note Each PAE has to be installed complete with protective cover only. Exception: If an additional protecting guard is provided (for example enclosure). Included in delivery PAE - CO 2 EM 4 kg...885334 8 kg...885338 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530,see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 62

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover Dimension drawing Dimensions in mm (inch) PAE h approx. 4 kg 925 (36.4) 8 kg 1335 (52.6) 214-420_105 / AI03_2016en 2/2 Page 63

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve Approvals 1) 1) LISTED Part of the system approval: - CO 2 extinguishing system HD-1 (S398010) - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - VSN 1230 (S31401 / VSN 200 (S313007) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 885336: PAE-CO 2 -EM-4kg reserve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. Weight approx. Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve 4 kg 885336 39 kg (86 lbs) 8 kg 885342 59 kg (130 lbs) 214-420_106 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Amount filled...2x 4 kg (2x 8.82 lbs) or 2x 8 kg (2x 17.64 lbs) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder EU...see cylinder filled Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The release device PAE has a reserve cylinder. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Note Each PAE has to be installed complete with protective cover only. Exception: If an additional protecting guard is provided (for example enclosure). Included in delivery PAE - CO 2 EM reserve 4 kg...885336 8 kg...885342 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 64

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve Dimension drawing Dimensions in mm (inch) PAE h approx. 4 kg 925 (36.4) 8 kg 1335 (52.6) 214-420_106 / AI03_2016en 2/2 Page 65

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover, FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 911751: PAE-CO 2 -EM-3,6kg compl. FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical with protective cover FM/UL 3.6 kg 911751 3.6 kg (7.9 lbs) 28 kg (62 lbs) 7.1 kg 911759 7.1 kg (15.7 lbs) 37 kg (82 lbs) 3) Cylinder with valve are not included in delivery 214-420_107 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The release device PAE has a protecting cover to protect against unintentional contact. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Included in delivery PAE - CO 2 EM FM/UL 3.6 kg...911750 FM/UL 7.1 kg...911758 Protective cover PAE...885322 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder UL, EU...see cylinder filled Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 66

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover, FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 3.6 kg 925 (36.4) 7.1 kg 1335 (52.6) 214-420_107 / AI03_2016en 2/2 Page 67

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. with protective cover, with reserve, FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 911753: PAE-CO 2 -EM-3,6kg reserve compl. FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical with protective cover,with reserve FM/UL 3.6 kg 911753 2x 3.6 kg (2x 7.9 lbs) 46 kg (101 lbs) 7.1 kg 911761 2x 7.1 kg (2x 15.7 lbs) 61 kg (134 lbs) 3) Cylinder with valve are not included in delivery 214-420_108 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The release device PAE has a reserve cylinder and a protecting cover to protect against unintentional contact. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Included in delivery PAE - CO 2 EM reserve FM/UL 3.6 kg...911752 FM/UL 7.1 kg...911760 Protective cover PAE...885322 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder UL, EU...see cylinder filled Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 68

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. with protective cover, with reserve, FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 3.6 kg 925 (36.4) 7.1 kg 1335 (52.6) 214-420_108 / AI03_2016en 2/2 Page 69

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover, FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 911750: PAE-CO 2 -EM-3.6kg FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical without protective cover FM/UL 3.6 kg 911750 3.6 kg (7.9 lbs) 24 kg (53 lbs) 7.1 kg 911758 7.1 kg (15.7 lbs) 33 kg (73 lbs) 3) Cylinder with valve are not included in delivery 214-420_109 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Note Each PAE has to be installed complete with protective cover only. Exception: If an additional protecting guard is provided (for example enclosure). Included in delivery PAE - CO 2 EM FM/UL 3.6 kg...911750 FM/UL 7.1 kg...911758 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder UL, EU...see cylinder filled Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 70

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover, FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 3.6 kg 925 (36.4) 7.1 kg 1335 (52.6) 214-420_109 / AI03_2016en 2/2 Page 71

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. without protective cover, with reserve, FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) e.g. part no. 911752: PAE-CO 2 -EM-3,6kg reserve FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve FM/UL 3.6 kg 911752 2x 3.6 kg (2x 7.9 lbs) 38 kg (84 lbs) 7.1 kg 911760 2x 7.1 kg (2x 15.7 lbs) 57 kg (126 lbs) 3) Cylinder with valve are not included in delivery 214-420_110 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...5.4 l or 10.7 l Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. Depending on the version a 5.4 l (1.43 US.liq.gal) or 10.7 l (2.83 US.liq.gal) pilot cylinder is used. The release device PAE has a reserve cylinder. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Note Each PAE has to be installed complete with protective cover only. Exception: If an additional protecting guard is provided (for example enclosure). Included in delivery PAE - CO 2 EM reserve FM/UL 3.6 kg...911752 FM/UL 7.1 kg...911760 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 5.4 l / 10.7 l: - CO 2 - Cylinder UL, EU...see cylinder filled Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 72

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. without protective cover, with reserve, FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 3.6 kg 925 (36.4) 7.1 kg 1335 (52.6) 214-420_110 / AI03_2016en 2/2 Page 73

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover, DOT FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) part no. 911755: PAE-CO 2 -EM-6,8kg compl. DOT FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical with protective cover DOT FM/UL 911755 6.8 kg (15.0 lbs) 37 kg (82 lbs) 3) Cylinder with valve are not included in delivery Caution: It is not allowed to transport filled steel cylinder (DOT) in Europe 214-420_111 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...10.7 l (2.83 US.liq.gal) Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. The release device PAE has a protecting cover to protect against unintentional contact. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Included in delivery PAE - CO 2 EM DOT FM/UL 6.8 kg...911754 Protective cover PAE...885322 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 10.7 l: - CO 2 - Cylinder DOT - UL... Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 74

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical with protective cover, DOT FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 6.8 kg 1335 (52.6) 214-420_111 / AI03_2016en 2/2 Page 75

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. with protective cover, with reserve, DOT FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) part no. 911757: PAE-CO 2 -EM-6,8kg reserve compl. DOT FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical with protective cover, with reserve DOT FM/UL 911757 6.8 kg (15.0 lbs) 61 kg (134 lbs) 3) Cylinder with valve are not included in delivery Caution: It is not allowed to transport filled steel cylinder (DOT) in Europe 214-420_112 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...10.7 l (2.83 US.liq.gal) Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. The release device PAE has a reserve cylinder and a protecting cover to protect against unintentional contact. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Included in delivery PAE - CO 2 EM DOT FM/UL 6.8 kg...911754 Protective cover PAE...885322 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 10.7 l: - CO 2 - Cylinder DOT - UL... Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 76

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. with protective cover, with reserve, DOT FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 6.8 kg 1335 (52.6) 214-420_112 / AI03_2016en 2/2 Page 77

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover, DOT FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) part no. 911754: PAE-CO 2 -EM-6.8kg DOT FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical without protective cover DOT FM/UL 911754 6.8 kg (15.0 lbs) 33 kg (73 lbs) 3) Cylinder with valve are not included in delivery Caution: It is not allowed to transport filled steel cylinder (DOT) in Europe 214-420_113 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...10.7 l (2.83 US.liq.gal) Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Note Each PAE has to be installed complete with protective cover only. Exception: If an additional protecting guard is provided (for example enclosure). Included in delivery PAE - CO 2 EM DOT FM/UL 6.8 kg...911754 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 10.7 l: - CO 2 - Cylinder DOT - UL... Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 78

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electrical without protective cover, DOT FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 6.8 kg 1335 (52.6) 214-420_113 / AI03_2016en 2/2 Page 79

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. without protective cover, with reserve, DOT FM/UL Approvals 1) LISTED 1) Part of the system approval (VSN 200 und VSN 1230) Listed system covered by: UL-File EX6388 (CO 2 ) and UL-File EX26532 (Ar, VSN 200 and VSN 1230) part no. 911752: PAE-CO 2 -EM-6,8kg reserve DOT FM/UL Not included in delivery: Cylinder with valve see operating instruction PAE-CO 2 part no. 885374 Fastening material not shown Designation Part no. 3) Amount filled Weight approx. Pneumatic release device PAE - CO 2 electrical without protective cover, with reserve DOT FM/UL 911756 6.8 kg (15.0 lbs) 57 kg (126 lbs) 3) Cylinder with valve are not included in delivery Caution: It is not allowed to transport filled steel cylinder (DOT) in Europe 214-420_114 / AI03_2016en 1/2 Technical data Operating medium...co 2 - gaseous Working pressure...140 bar (2030 psi) Test pressure...210 bar (3045 psi) Pilot cylinder volume...10.7 l (2.83 US.liq.gal) Thread connection...for precision steel pipe 6x1 Product sheets also applying Weighing device WE4...see ad-on part cylinder Weight for weighing device 0.16 kg / 0.3 kg...see ad-on part cylinder Release device EM 24 V DC...see control device Lever - cylinder valve EM release...see control device Application The release device PAE electrical must only be used in accordance with system approval in stationary carbon dioxide, argon, nitrogen, VSN 200 and VSN 1230 fire extinguishing systems. The release device PAE provides all pneumatic system parts with carbon dioxide (CO 2 ) as work medium and is used to activate: - Cylinder batteries - Selector valves - Pneumatic control elements and alarm components (makrofon) - Pneumatic door closing devices - Pneumatic pressure relief dampers. Functional description The activation of the release device PAE occurs electrically (release device EM). Thus the toggle valve on the pilot cylinder is opened and the carbon dioxide (CO 2 ) flows through the connected pipe assembly respectively the hose to the pneumatic system components of the fire extinguishing system. The release device PAE has a reserve cylinder. The entire release device PAE is fastened onto a bearing structural element via a U-profile. Note Each PAE has to be installed complete with protective cover only. Exception: If an additional protecting guard is provided (for example enclosure). Included in delivery PAE - CO 2 EM DOT FM/UL 6.8 kg...911754 Adapter connection NPT...911762 Operating instruction PAE-CO 2 part no. 885374 as well as fastenings Not included in delivery Cylinder with valve 10.7 l: - CO 2 - Cylinder DOT - UL... Pre-assembled connection pipe...see operating instruction PAE Support weighing device PAE...886350, see mounting accessories Reset tool...885530, see control device Monitoring loss pneum. actuation device...888998, see monitoring device Monitoring for release device EM...885740, see monitoring device Page 80

Extinguishing technology CO 2 HP Control device CO 2 HP components Pneumatic release device PAE - CO 2 electr. without protective cover, with reserve, DOT FM/UL Dimension drawing Dimensions in mm (inch) PAE h approx. 6.8 kg 1335 (52.6) 214-420_114 / AI03_2016en 2/2 Page 81

Extinguishing technology Halocarbon agents Monitoring device Halocarbon agents Contact pressure gauge VSN 1230/200 Approvals 1) G309005 0786-CPD-30095 e.g. part no. 888604: Contact pressure gauge 40bar / 22.5 (NC) functional check within the framework of system-specific functional test Spare parts - O-ring part no. 888023 - Supporting ring O-ring part no. 888024 Nominal pressure at 20 C (68 F) Switching mode Part no. Pressure range / switching point Max. operating pressure at 50 C (122 F) Tolerance acc. to EN 12094-10 Weight bar (psi) bar (psi) bar (psi) bar (psi) kg (lbs) 25 (363) 888604 40 / 22.5 (580 / 326) 35 (508) ± 0.9 (± 13) 0.17 (0.37) 42 (609) break contact (NC) 888606 60 / 38 (870 / 551) 53 (767) ± 1.3 (± 19) 0.16 (0.35) 50 (725) 888607 60 / 45 (870 / 653) 60 (870) ± 1.3 (± 19) 0.16 (0.35) 25 (363) 888608 40 / 22.5 (580 / 326) 35 (508) ± 0.9 (± 13) 0.17 (0.37) 42 (609) make contact (NO) 888610 60 / 38 (870 / 551) 53 (767) ± 1.3 (± 19) 0.16 (0.35) 50 (725) 888611 60 / 45 (870 / 653) 60 (870) ± 1.3 (± 19) 0.17 (0.37) Caution special type: Contact pressure gauge without VdS system approval for VSN 200/1230 fire extinguishing system 42 (609) break contact (NC) 888605 0.16 (0.35) 60 / 36 (870 / 52 53 (767) ± 1.3 (± 19) make contact (NO) 888609 0.17 (0.37) 231-430_101 / AI01_2015en 1/2 1) The pressure gauge may be used only in the temperature range from +5 C to +25 C (41 F to 77 F) at the side of the extinguishing agent cylinders to be monitored. Note switching mode Break contact (NC) - pressureless closed: At nominal pressure the contact is opened. Contact makes with falling pressure or anticlockwise pointer motion. Make contact (NO) - pressureless opened: At nominal pressure the contact is closed. Contact breaks with falling pressure or anticlockwise pointer motion. 3) Note for temperature ranges Observe a working temperature from +5 C to +25 C (41 F to 77 F) to receive an indication of loss of extinguishing agent in accordance with VdS / CE. The mechanical, electrical function of the contact pressure gauge is guaranteed within the product temperature ranges from -40 C up to +60 C (-40 F to 140 F). Technical data Type...PGS 21.050 Pressure medium...fk-5-1-12, HFC-227ea Nominal size...50 Accuracy class...1.6 Temperature ranges: 3) Working temperature...+5 C to +25 C (41 F to 77 F) Product temperature, storage temperature:...-40 C to +60 C (-40 F to 140 F)...measuring medium max. +60 C (140 F) IP code...ip65 with mounted cable Measuring network, motion work...copper alloy Directives, Standards..EN837-1, VdS CEA 4030, EN 12094-10 CE conformity...acc. to Construction Products Regulation (EU)...No. 305/2011 Marking manufacturer code (WIKA), bar, accuracy class (1,6), type designation (PGS 21.050), switch pressure via set point on dial, year (WW YY), approval sign (VdS, CE) Page 82

Extinguishing technology Halocarbon agents Monitoring device Halocarbon agents Contact pressure gauge VSN 1230/200 Electrical data Switching voltage...4.5 24 V DC / VAC Switching current...5 100 ma Contact load...max. 3 W, dry contact Conducting wire...two-core, 100 cm (39.37") Cross-section of conducting wire...0.14 mm² (0.000217 square inch),...awg 26 Design of instrument dial Material...aluminium, white Scale...dual scale (bar / psi) Indicating range...0 to pressure range Indicating range marked: - in red...0 to switching point - in green...switching point to max. working pressure...at 50 C (122 F) Dimension drawing Dimensions in mm (inch) 231-430_101 / AI01_2015en 2/2 Page 83

Extinguishing technology Halocarbon agents Monitoring device Halocarbon agents Contact pressure gauge UL, VSN 200 Approvals 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 889306: Contact pressure gauge UL 725 (50) psi (bar)/ 324 (22.5) NO HFC-227ea functional check within the framework of system-specific functional test Spare parts - O-ring part no. 888023 - Supporting ring O-ring part no. 888024 Nominal pressure at 70 F (21 C) Switching mode 3) Part no. Pressure range / switching point max. Pressure Tolerance acc. to UL / ULC Weight psi (bar) psi (bar) psi (bar) psi (bar) kg (lbs) 360 (25) 889311 870 / 324 (60 / 22.5) 725 (50) ± 19 (± 1.3) 610 (4 break contact (NC) 889312 1160 / 549 (80 / 37.8) 1015 (70) ± 21 (± 1.4) 725 (50) 889313 1450 / 653 (100 / 45) 1160 (80) ± 23 (± 1.5) 360 (25) 889306 870 / 324 (60 / 22.5) 725 (50) ± 19 (± 1.3) 610 (4 make contact (NO) 889307 1160 / 549 (80 / 37.8) 1015 (70) ± 21 (± 1.4) 725 (50) 889309 1450 / 653 (100 / 45) 1160 (80) ± 23 (± 1.5) 0.17 (0.37) 231-430_104 / AI03_2017en 1/2 3) Note switching mode Break contact (NC) - pressureless closed: At nominal pressure the contact is opened. Contact makes with falling pressure or anticlockwise pointer motion. Make contact (NO) - pressureless opened: At nominal pressure the contact is closed. Contact breaks with falling pressure or anticlockwise pointer motion. 4) Note for temperature range The switching point of the integrated electric pressure switch is designed for the nominal system pressure minus 10 % at 20 C. Due to the temperature related pressure drop, this switching value is also achieved for systems without pressure loss if the ambient temperature falls below 5 C. We therefore recommend using the integrated electric pressure switch to monitor the system pressure only at temperatures > 5 C. Technical data Pressure medium...hfc-227ea, N 2 Nominal size...50 Accuracy class...1.6 Working temperature electrical switching function...see note 4) Temperature range: 4) Product temperature, storage temperature:...-40 C to +60 C (-40 F to +140 F)...measuring medium max. +60 C (+140 F) IP code...ip65 with mounted cable Measuring network, motion work...copper alloy Electrical data Switching voltage...4.5 24 V DC / VAC Switching current...5 100 ma Contact load...max. 3 W, dry contact Conducting wire...two-core, 100 cm (39.37") Cross-section of conducting wire...0.14 mm² (0.000217 square inch),...awg 26 Page 84

Extinguishing technology Halocarbon agents Monitoring device Halocarbon agents Contact pressure gauge UL, VSN 200 Design of instrument dial Design of instrument dial...according to UL 2166 Material...aluminium, white Scale...dual scale (bar / psi) Indicating range...0 to pressure range Indicating range marked: - 0 to I...Recharge - I to II...red - II to III...green - III to IV...red - IV to max....overcharged Dimension drawing Dimensions in mm (inch) Indicating range marked Nominal pressure at 70 F (21 C) psi (bar) Red area I to II Green area II to III Red area III to IV Marking at nominal pressure Marking at I Marking at IV 360 (25) 290-324 324-396 396-493 360 I (25) I 70 F I (21 C) 290 (20) @0 F (-18 C) 493 (34) @122 F (50 C) 610 (4 480-549 549-671 671-767 610 I (4 I 70 F I (21 C) 480 (33) @0 F (-18 C) 767 (53) @122 F (50 C) 725 (50) 587-653 653-798 798-864 725 I (50) I 70 F I (21 C) 587 (40) @0 F (-18 C) 864 (60) @122 F (50 C) 231-430_104 / AI03_2017en 2/2 Page 85

Extinguishing technology Halocarbon agents Monitoring device Halocarbon agents Pressure gauge UL, VSN 200 Approvals 1) 1) LISTED 1) Listed system covered by UL-file EX26532 (VSN 200 and VSN 1230) Part of the system approval e.g. part no. 912100: Pressure gauge UL 725 (50) psi (bar) HFC-227ea functional check within the framework of system-specific functional test Spare parts - O-ring part no. 888023 - Supporting ring O-ring part no. 888024 Nominal pressure at 70 F (21 C) Part no. Pressure range max. Pressure Weight psi (bar) psi (bar) psi (bar) kg (lbs) 360 (25) 912100 870 (60) 725 (50) 610 (4 912101 1160 (80) 1015 (70) 725 (50) 912102 1450 (100) 1160 (80) 0.15 (0.33) 231-430_105 / AI02_2015en 1/2 Technical data Pressure medium...hfc-227ea Nominal size...50 Accuracy class...1.6 Temperature ranges...-40 C to +60 C (-40 F to 140 F)...measuring medium max. +60 C (140 F) Measuring network, motion work...copper alloy Design of instrument dial Design of instrument dial...according to UL 2166 Material...aluminium, white Scale...dual scale (bar / psi) Indicating range marked: - 0 to I...Recharge - I to II...red - II to III...green - III to IV...red - IV to max....overcharged Page 86

Extinguishing technology Halocarbon agents Monitoring device Halocarbon agents Pressure gauge UL, VSN 200 Dimension drawing Dimensions in mm (inch) Indicating range marked Nominal pressure at 70 F (21 C) psi (bar) Red area I to II Green area II to III Red area III to IV Marking at nominal pressure Marking at I Marking at IV 360 (25) 290-324 324-396 396-493 360 I (25) I 70 F I (21 C) 290 (20) @0 F (-18 C) 493 (34) @122 F (50 C) 610 (4 480-549 549-671 671-767 610 I (4 I 70 F I (21 C) 480 (33) @0 F (-18 C) 767 (53) @122 F (50 C) 725 (50) 587-653 653-798 798-864 725 I (50) I 70 F I (21 C) 587 (40) @0 F (-18 C) 864 (60) @122 F (50 C) 231-430_105 / AI02_2015en 2/2 Page 87

Inert gas extinguishing technology Monitoring device Limit switch ZS 256-11z Approvals 1) 1) LISTED 1) Listed system covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) Part of the system approval (VSN 200 and VSN 1230) part no. 828482: Limit switch ZS 256-11Z-M20-2219 Functional check during the maintenance intervals specific to the fire extinguishing system, but at least annually. Designation Part no. Weight Limit switch ZS 256-11z 828482 0.14 kg (0.2 lbs) Technical data Type...ZS 256-11z-M20-2219 Housing...thermopl. glass fiber concentrated, self-quenching IP code...ip67 Contact material...silver Contacts...1 NC, 1 NO...galvanically isolated contact bridges Operating temperature...-30 C to +80 C (-22 F to 176 F) Switch system...spring control with...twofold brake contacts, forced opener Nominal isolation voltage...500 V Permanent current...10 A Nominal operation current / voltage...4 A (230 V AC);...2,5 A (400 V AC); 1 A (500 V AC) Short-circuit protection...10 A slow blow, 16 A quick blow Actuation force...min. 9 N Mechn. durability...20x10 6 switching cycles Operation speed...max. 1 m/s, min. 0,01 m/s Time on in percent...max. 5000 / h Dimension drawing Dimensions in mm (inch) 211-430_104 / AI01_2017en 1/1 Circuit diagram: Page 88

Inert gas extinguishing technology Monitoring device Limit switch Typ US 432y, 2 contacts Approvals 1) 1) LISTED 1) Listed system covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) Part of the system approval (VSN 200 and VSN 1230) part no. 724420: Limit switch US 432Y-M20-2352 2 contacts see mounting and wiring instructions of the manufacturer Designation Part no. Weight Limit switch type US 432y, 2 contacts 724420 0.31 kg (0.68 lbs) Technical data Type...US 432y-M20-2352 Housing...alloy die-cast metal, chrome dulled and varnished IP code...ip65 Contact material...silver Switch system...slow action...with twofold brake contacts Ambient temperature...-20 C to +60 C (-4 F to 140 F) Nominal isolation voltage...500 V Permanent current...16 A Nominal operation current...6 A, 400 V AC Short-circuit protection...16 A slow blow, 20 A quick blow Dimension drawing Dimensions in mm (inch) Actuation force...max. 7 N (effeciency of the switch way) Operation speed...max. 1 m/s, min. 0.001 m/s Time on in percent...max. 3000 / h Mechn. durability...10x10 6 switching cycles Contact spud durability...2x10 6 switching cycles...at 6 A / 400 V AC, cos ϕ = 0.4 Application limit switch pneum. operated, manifold set, selector valve Included in delivery Limit switch type US 432y with mounting and wiring instructions 211-430_105 / AI00_2015en 1/1 note: actuate limit switch axially Wiring diagram contacts shown not operated changing of the contact type from NC to NO contact and vice versa is adjustable Page 89

Inert gas extinguishing technology Monitoring device Limit switch US 434y, 4 contacts Approvals without approval part no. 224831: Limit switch US 434Y-M20-2352 4 contacts see mounting and wiring instructions of the manufacturer Designation Part no. Weight Limit switch US 434y, 4 contacts 224831 0.42 kg (0.93 lbs) Technical data Type...US 434y-M20-2352 Housing...alloy die-cast metal, chrome dulled and varnished IPcode...IP65 Contact material...silver Switch system...slow action...with twofold brake contacts Ambient temperature...-20 C to +60 C (-4 F to 140 F) Nominal isolation voltage...500 V Permanent current...16 A Nominal operation current...6 A, 400 V AC Short-circuit protection...16 A slow blow, 20 A quick blow Dimension drawing Dimensions in mm (inch) Actuation force...max. 100 N (effeciency of the switch way) Operation speed...max. 1 m/s, min. 0.001 m/s Time on in percent...max. 3000 / h Mechn. durability...10x10 6 switching cycles Contact spud durability...2x10 6 switching cycles...at 6 A / 400 V AC, cos ϕ = 0.4 Application limit switch pneum. operated, manifold set, selector valve Included in delivery Limit switch US 434y with mounting and wiring instructions Wiring diagram 211-430_006 / AI01_2017en 1/1 Note: actuate limit switch axially contacts shown not operated changing of the contact type from NC to NO contact and vice versa is adjustable Page 90

Inert gas extinguishing technology Monitoring device Monitoring release device EM Approvals 1) 1) LISTED 1) Listed system covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) Part of the system approval (VSN 200 and VSN 1230) part no. 885740: EM-release supervision see product information monitoring EM-release part no. 885742 Designation Part no. Weight Monitoring release device EM 885740 0.09 kg (0.2 lbs) Application The monitoring release device EM may be used only in accordance with system approval in stationary CO 2, argon and nitrogen fire extinguishing systems. Function description The monitoring EM-release device is used for electrical monitoring of the EM-release incl. cylinder valve lever in operation. Product sheets also applying Limit switch ZS 256-11z...see monitoring device Included in delivery Limit switch ZS 256-11z...828482, see monitoring device 2x Cheese-head screw ISO4762-M4x25-8.8-A2E...917743 2x Washer DIN125-A 4.3-St-gal. Zn...896019 Product information monitoring EM-release...885742 Installations example 211-430_108 / AI01_2016en 1/1 Page 91

Inert gas extinguishing technology Monitoring device Limit switch pneum. operated Approvals 1) 3) 1) Part of the system approval: - Oxeo inert gas extinguishing system HD200 (S315011) / HD300 (S315010) - Oxeo inert gas extinguishing system with ConstantFlow HD200 (S31501 - Oxeo inert gas extinguishing system with ConstantFlow HD300 (S315013) - Oxeo inert gas exting. system with ConstantFlow HD300-LCP (S316006) - CO 2 extinguishing system HD-1 (S398010) / HD-2 (S398011) - CO 2 extinguishing system ND-1 (S39801, electrical release - CO 2 extinguishing system ND-2 (S398013), non-electrical release - Oxeo Nitrogen low pressure extinguishing system (S310016) Listed system covered by UL-File EX26532 (Ar, VSN 200 and VSN 1230) 3) Part of the system approval (VSN 200 and VSN 1230) part no. 826758: Limit switch pneum. operated Functional check during the maintenance intervals specific to the fire extinguishing system, but at least annually. Designation Part no. Weight Limit switch pneum. operated 826758 1.5 kg (3.31 lbs) Application The limit switch pneum. operated may only be used in accordance with system approval in stationary CO 2, argon and nitrogen fire extinguishing systems. Dimension drawing Dimensions in mm (inch) ~ 100 (~3.94) 211-430_109 / AI02_2017en 1/1 Function description In case of fire the selector valve is released and the extinguishing line is flooded. The presence of pressure actuates the cylinder, which in turn opens or closes the floating contacts of the limit switch depending on how the contacts are set (make or break). Product sheets also applying Cylinder ø25 x H30...see control device Limit switch US 432y...see monitoring device Included in delivery Cylinder ø25 x H30...227303, see control device Limit switch type US 432y...724420, see monitoring device Support limit switch pneum. activated...827866 Union GE 6-PSR-ED A3C...125578, M1-11-01 2x Cheese-head screw DIN84-M5x25-Ms...106915 2x Hex. nut DIN934-M5-Ms...108444 2x Washer DIN125-B-5,3-Ms...109771 Technical description limit switch pneumatic...827740 as well as fastening material Pressure connection Page 92 ~ 290 (~11.4

Extinguishing technology CO 2 HP Monitoring device CO 2 Monitoring loss pneumatic activation device PAE Approvals without approval part no. 888998: Monitoring loss pneumatic activation see technical description monitoring loss pneumatic activation device part no. 888999 Designation Part no. Weight Monitoring loss pneumatic activation device PAE 888998 0.20 kg (0.44 lbs) Application The monitoring loss pneumatic activation device may only be used in accordance with system approval in stationary CO 2 -, argon- and nitrogen fire extinguishing systems. It facilitates monitoring of the permissible loss (5% - 10% supply per control cylinder). If the permissible margin of loss is exceeded the beam weight falls and actuates a reed contact limit switch. The limit switch sends a fault message to the monitoring control panel and the fault is indicated locally via LED. Included in delivery Reed contact limit switch...886343, see monitoring device Magnet bracket for ÜWA loss PAE...876875 Bracket limit switch monitoring loss PAE WE4...888986 Technical description monitoring loss pneumatic activation device...888999 as well as screws, nuts and washers Mounting example 214-430_005 / AI03_2017en 1/1 Page 93

Extinguishing technology Halocarbon agents Accessories Halocarbon agents Labels VSN 200 Caution!... Approvals no approval required e.g. part no. 915479: Sign VSN200 Caution! This area is protected by a VSN 200 fire extinguishing system Alu 210x210 maintenance-free Text Part no. Weight CAUTION! This area is protected by a VSN 200 fire extinguishing system. CAUTION! Do NOT enter unless automatic release is isolated. CAUTION! Do NOT enter unless isolate valve is in the closed position. 915479 915480 915481 0.12 kg (0.26 lbs) Technical data Material...aluminium plate 1 mm (0.04") thickness Script type...helvetica medium face Company logo...ral 5002 - blue Not included in delivery Fastening material Dimension drawing Dimensions in mm (inch) 231-710_112 / AI01_2015en 1/1 Page 94

Extinguishing technology Halocarbon agents Mounting accessories Halocarbon agents Toolkit VSN 1230/200 Approvals no approval required e.g. part no. 910907: Toolkit VSN 200 / 1230 compl. see product information: - Toolkit VSN 1230/200 compl. part no. 912237 - Test device service part no. 888622 Spare parts Sensor tip for leak detector part no. 912094 (has to be replaced after 20 operating hours of the leak detector) Designation Part no. Weight Toolkit VSN 1230/200 910907 4.89 kg (10.77 lbs) Optional tools Test device service pressure gauge 888051 0.65 kg (1.43 lbs) Leak detector for halogens 910851 0.52 kg (1.15 lbs) Technical data Dimensions B x H x T...approx. 460 x 105 x 370 mm...(18,1" x 4,1" x 14,6") Material...polypropylene Application Tollkit special prepared for installation and service of VSN 1230/200 systems 231-720_101 / AI02_2015en 1/1 Content toolkít VSN 1230/200 - Torque wrench 9x12 5-50 Nm - Pin type face wrench 35x3.9 for nozzles CD 1 ¼ - 1 ½ - Pin type face wrench 20x2.9 for nozzles CD ½ - 1 - Pin wrench adjustable D = 5 mm - 2x Combination wrench 14 mm - Combination T-L-Shapes wrench hex 4 mm - Combination wrench 10 mm - 5x Plug for pressure gauge outlet VSN 200-5x Plug for pilot connection G1/8 VSN 200-5x Adapter M12x1.5 G1/8 VSN 200 - Insert open end wrench 9x12 10 mm - Open end wrench 41 mm aluminum complete - Screwdriver Pozidriv PZ1 - Insert open end wrench 9x12 14 mm - Combination T-L-Shapes wrench hex 3 mm - Socket 1/2" 8 mm Hex Bit / long - Ratchet insert tool 9x12 ½" - Tool for 2 hole nut 20x2.9 complete - Tool for 2 hole nut 35x3.9 complete - Insert open end wrench 9x12 46 mm complete - Socket ½" 17 mm hexagon - Insert open end wrench 9x12 50 mm complete - Reset tool release device EM - Screw reset tool VSN 200 - Mounting aid O-/supporting ring pressure gauge - 10x Supporting ring O-ring pressure gauge VSN200-10x O-Ring pressure gauge VSN200 Optional tools (1) Test device service pressure gauge ( Leak detector for halogens with sensor tip (3) (1) ( (3) Page 95

Extinguishing technology Halocarbon agents Mounting accessories Halocarbon agents Screw reset tool VSN 1230/200 Approvals no approval required part no. 887645: Screw reset tool VSN 200 maintenance-free Designation Part no. Weight Screw reset tool VSN 1230/200 887645 0.39 kg (0.86 lbs) Technical data Werkstoff...brass Application The screw reset tool VSN 1230/200 functions as tool to reset the electrical release device and the electrical release device with mechanical blocking device after a release took place - also during maintenance. Reset note For reset the screw reset tool ( is screwed in by hand as far as stop onto the electrical release device (1). After removing this screw the pin must be in the not activated position. Caution The assembly of a released release device on the cylinder valve leads to the opening and emptying of the cylinders. 231-720_103 / AI00_2015en 1/1 Dimension drawing Dimensions in mm (inch) Figure 1: Resetting release pin Position of the release pin With the release pin (1) in the position "activated" (= released) a red marking ( is visible at the release pin and the pin protrudes approx. 3 mm more as in "not activated" position: Position "not activated": the pin protrudes approx. 5,5 mm Position "activated": the pin protrudes approx. 8,1 mm. On each electrical release device is a label on which this is shown. Figure 2: Position release pin "activated" Page 96

Extinguishing technology CO 2 HP Assembly accessories CO 2 Support weighing device PAE Approvals no approval required part no. 886350: Support weighing device PAE maintenance-free Designation Part no. Weight Support weighing device PAE 886350 0.02 kg (0.04 lbs) Technical data Material...spring wire, EN 10270-1-2,5 Z Dimension drawing Dimensions in mm (inch) Application - Ease of assembling / disassembling of the pilot cylinder (PAE) resp. extinguishing agent cylinder (one-cylinder system) - Prevention of loss indication during cylinder assembling / cylinder disassembling Mounting example 214-720_002 / AI01_2015en 1/1 Page 97

Pipe element (Special) Welding fitting and flange Welding neck flange DIN 2638 - PN160 part no. 786592: Flange DIN2638-E65x76,1-C22.8 Visual check during the maintenance intervals specific to the fire extinguishing system, but at least annually. Designation DN Part no. Weight kg (lbs) 65 786592 8.4 (18.5) Welding neck flange DIN2638 - PN160 80 810618 9.8 (21.6) 100 888963 14.8 (32.6) Technical Data Welding neck flange...acc. to DIN2638 - PN160 (2320 psi) Flange connection...acc. to DIN2501 - PN160 (2320 psi) Material...C22.8 all assemblies with test certificate acc. to DIN EN 10204-3.1 Dimension drawing Dimensions in mm ød 280-120_003 / AI02_2017en 1/1 Note Flanges without protective varnish and without coating. Welded joints Electrode TK 2,5...759873 Electrode TK 3,25...759885 Application Welding neck flange DIN 2638 - PN160 for flange connection in: - CO 2 - high pressure fire extinguishing systems - Argon-, Nitrogen-, IG-55-, IG-541- fire extinguishing systems with ConstantFlow (CF) - Halocarbon fire extinguishing systems Not included in delivery hex. screws, hex. nuts and gasket see selection table Steel pipe 1 4 2 3 øk b H ød Selection table flange connections PN160 DN PN160 ØD ød b ØK H Screws 65 220 26 34 170 82 8 x M24 80 230 26 36 180 86 8 x M24 100 265 30 40 210 100 8 x M27 Pos. 1 2 3 4 DN 65 80 100 Flange DIN2638 786592 Hex. srew DIN931 E65x76,1 C22.8 789556 810618 M24 x 100 E80x88,8 C22.8 888963 E100x114,3 C22.8 888959 M27 x 130 Page 98 Hex. nut DIN934 786610 M24 810680 M27 Gasket PN160 773647 C4400 773659 C4400 773684 C4400

Pipe element (Special) Pipe threaded connection Pipe threaded connection DN15-80 e.g. part no. 776685: Pipe 21,3x2,6 St37.0-B-90-2458 Functional check during the maintenance intervals specific to the fire extinguishing system, but at least annually. 280-210_001 / AI01_2017en 1/1 DN Application 1 2 3 4 5 6 7 8 9 Part no. Test pressure bar Test Colour certificate Surface1) coding 15 776685 90 3.1 B blue 15 840958 210 3.1 B orange 1 2 3 4 5 6 7 8 9 20 776697 90 3.1 B blue 1 2 3 4 5 6 7 8 9 25 872766 50 3.1 A gold 25 776703 90 3.1 B blue 25 840983 210 3.1 B orange 1 2 3 4 5 6 7 8 9 32 776715 90 3.1 B blue 32 872778 50 3.1 A gold 1 2 3 4 5 6 7 8 9 40 872780 50 3.1 A gold 40 776727 90 3.1 B blue 1 2 3 4 5 6 7 8 9 50 776739 90 3.1 B blue 50 841057 210 3.1 A orange 50 886346 210 3.1 B orange 50 885208 353 3.1 B red 50 886126 548 3.1 B purple 1 2 3 4 5 6 7 8 9 65 776740 90 3.1 B blue 65 857616 210 3.1 A orange 65 886347 210 3.1 B orange 65 885209 353 3.1 B red 65 886124 548 3.1 B purple 1 2 3 4 5 6 7 8 9 80 847874 90 3.1 B blue 80 776788 50 3.1 A gold 80 841148 90 3.1 A blue 1) A = Steel pipe, black (blank) B = Steel pipe, thermal galvanized Application 1 = CO 2 LP system...30 bar (435 psi) 2 = CO 2 LP manifold socket...30 bar (435 psi) 3 = CO 2 HD / Ar / N 2 / IG-55 / IG-541 downsystem piping and Halocarbon / ConstantFlow (CF) system...60 bar (870 psi) 4 = CO 2 HP shipbuilding...100 bar (1450 psi) 5 = CO 2 HP upstream piping...140 bar (2031 psi) 6 = Ar / N 2 / IG-55 / IG-541 - upstream piping...235 bar (3408 psi) 7 = Ar / N 2 / IG-55 / IG-541-300 bar HP upstream piping...365 bar (5294 psi) 8 = CO 2 LP base manifold...30 bar (435 psi) 9 = CO 2 HP base manifold...140 bar (2031 psi) Page 99

Pipe element (Special) Fitting threaded connection Fittings - type D, EN 10242 galvanized 280-220_001 / AI00_2015en 1/2 Designation Feature Part no. Weight kg (lbs) 1/2 747921 0.09 (0.20) Elbow A1 3/4 747933 0.14 (0.31) 1 747945 0.19 (0.4 1.1/4 747957 0.35 (0.77) 1.1/2 747969 0.38 (0.84) 2 747970 0.59 (1.30) 2 x 1 790307 0.54 (1.14) 2.1/2 757694 0.94 (2.07) 3 886833 1.63 (3.59) Elbow A4-45 1/2 886491 0.08 (0.18) 1/2 747982 0.12 (0.26) 3/4 747994 0.17 (0.37) T B1 1 749516 0.30 (0.66) 1.1/4 749530 0.44 (0.97) 1.1/2 749577 0.50 (1.10) 2 749590 0.92 (2.03) 2.1/2 777422 1.56 (3.44) 3 886097 2.19 (4.83) 3/4 x 1/2 x 3/4 748007 0.15 (0.33) 1 x 1/2 x 1 888063 0.32 (0.71) 1 x 3/4 x 1 749528 0.26 (0.57) 1.1/4 x 3/4 x 1 749541 0.27 (0.60) 1.1/4 x 1/2 x 1.1/4 888064 0.40 (0.88) 1.1/4 x 3/4 x 1.1/4 749553 0.29 (0.64) 1.1/4 x 1 x 1.1/4 749565 0.33 (0.73) 1.1/2 x 1/2 x 1.1/2 888065 0.47 (1.04) 1.1/2 x 3/4 x 1.1/2 749589 0.36 (0.79) 2 x 1/2 x 2 888066 0.72 (1.59) 2 x 3/4 x 2 888068 0.70 (1.54) 2 x 1 x 2 749607 0.55 (1.21) 2 x 1.1/4 x 2 790186 0.61 (1.34) 2 x 1.1/2 x 2 790198 0.65 (1.43) Plug T9 1/2 817984 0.05 (0.11) 1 818654 0.12 (0.26) 1.1/4 818666 0.20 (0.44) 1.1/2 818678 0.23 (0.51) 2 759800 0.37 (0.8 Designation Feature Part no. Page 100 Weight kg (lbs) 1/2 749887 0.05 (0.11) Cap T1 3/4 749899 0.08 (0.18) 1 749905 0.11 (0.24) 1.1/4 749917 0.17 (0.37) 1.1/2 749929 0.23 (0.51) 2 749930 0.38 (0.84) 2.1/2 757724 0.62 (1.37) 3 764800 0.84 (1.85) 1/2 757669 0.22 (0.49) Union U11 3/4 749942 0.27 (0.6) 1 749954 0.36 (0.79) 1.1/4 749966 0.61 (1.34) 1.1/2 749978 0.75 (1.65) 2 749980 1.24 (2.73) 2.1/2 819040 1.84 (4.06) 3 886837 2.50 (5.51) Union U12 1/2 818540 0.20 (0.44) 1/2 x 1/4 749644 0.04 (2.29) 3/4 x 1/2 749656 0.05 (2.31) Reducing nipple N4 1 x 3/8 768994 0.10 (0.2 Hex. nipple, reduced N8 1 x 1/2 749668 0.10 (0.2 1 x 3/4 749670 0.08 (0.18) 1.1/4 x 3/4 749681 0.16 (0.35) 1.1/4 x 1 749693 0.13 (0.29) 1.1/2 x 3/4 749700 0.22 (0.49) 1.1/2 x 1 749711 0.20 (0.44) 1.1/2 x 1.1/4 749723 0.13 (0.29) 2 x 1 749735 0.41 (0.90) 2 x 1.1/4 749747 0.35 (0.77) 2 x 1.1/2 749759 0.27 (0.6) 2.1/2 x 2 757980 0.49 (1.08) 3 x 2.1/2 886835 0.65 (1.43) 1/2 x 1/4 857008 0.05 (0.11)

Pipe element (Special) Fitting threaded connection Fittings - type D, EN 10242 galvanized Designation Feature Part no. Hex. nipple N8 Socket, reduced M2 Weight kg (lbs) 1/2 749826 0.07 (0.15) 3/4 749838 0.10 (0.2 1 749840 0.15 (0.33) 1.1/4 749851 0.23 (0.51) 1.1/2 749863 0.30 (0.66) 2 749875 0.48 (1.06) 1 x 3/4 749619 0.12 (0.26) 1.1/4 x 3/4 749620 0.19 (0.4 2 x 1.1/4 749632 0.45 (0.99) Designation Feature Part no. Socket M2 Weight kg (lbs) 1/2 749760 0.06 (0.13) 3/4 749772 0.08 (0.18) 1 749784 0.12 (0.26) 1.1/4 749796 0.19 (0.4 1.1/2 749802 0.26 (0.57) 2 749814 0.42 (0.93) 2.1/2 762372 0.66 (1.46) 3 886834 1.10 (2.43) Technical Data Test pressure...160 bar (2320 psi), single test...or 300 bar (4351 psi), type test Operating temperature...up to -50 C (-58 F) Material...malleable cast iron, galvanized...en-gjmb-350-10 oder EN-GJMW-400-5 Test certificate...en 10204-2.2 Marking...with stamped D and red colour point Application CO 2 high pressure downstream piping...60 bar (870 psi) CO 2 low pressure system...30 bar (435 psi) Ar / N 2 / IG-55 / IG-541: - downstream piping (after pressure reducer)...60 bar (870 psi) - ConstantFlow (CF) system...60 bar (870 psi) Halocarbon (HFC 227ea) system...60 bar (870 psi) Halocarbon (FK-5-1-1 system...60 bar (870 psi) 280-220_001 / AI00_2015en 2/2 Page 101

Pipe element (Special) Pilot pipe Pipe for extinguishing pipework and pilot pipes part no. 823563: Pipe 6x1 B-210-2394/1 functional check within the framework of system-specific functional test Designation Part no. Nominal diameter Test pressure bar (psi) Weight kg (lbs) 16x1 B-210-2394/1 823563 1) DN4 210 (3045) 0.3 (0.06) Pipe 10x1 B-210-2394/1 823575 1) DN8 210 (3045) 0.22 (0.10) 15x1.5 B-90-2391 240020 DN12 90 (1305) 0.50 (0.23) 1) Marked by black heat shrink sleeve at both pipe ends Technical Data Material...steel, galvanized Pipe 6 x 1 and 10 x 1...acc. to DIN2394 15 x 1.5...acc. to DIN2391 Test certificate...en 10204-3.1 (material and pressure test) Application Precision steel pipe are used for extinguishing pipework and pilot pipes in: - CO 2 - high pressure fire extinguishing systems - CO 2 - low pressure fire extinguishing systems - Argon-, Nitrogen-, IG-55-, IG-541 fire extinguishing systems - Halocarbon fire extinguishing systems 280-310_001 / AI00_2015en 1/1 Dimension drawing Dimensions in mm (inch) Pipe d s 6x1 6 (0.24) 1 (0.04) 10x1 10 (0.39) 1 (0.04) 15x1.5 15 (0.59) 1.5 (0.06) Page 102

Pipe element (Special) Fitting pilot pipe Unions - stock list Feature Part no. Series Pipe o.d. Weight kg (lbs) G - Union G 06-PL A3C 125920 06 0.034 (0.07) G 10-PL A3C 125943 L PN315 10 0.062 (0.14) G 15-PL A3C 125931 15 0.138 (0.3) SV - Bulkhead union SV 06-PL Ms 822900 06 0.064 (0.14) SV 10-PL Ms 822893 L PN315 10 0.114 (0.25) SV 10-PL A3C 212010 10 0.106 (0.23) W - Elbow union W 06-PL A3C 125797 06 0.052 (0.11) W 10-PL A3C 174678 L PN315 10 0.096 (0.21) W 15-PL A3C 125815 15 0.160 (0.35) T - Union tee T 06-PL A3C 125633 06 0.070 (0.15) T 10-PL A3C 125645 L PN315 10 0.126 (0.28) T 15-PL A3C 125669 15 0.230 (0.51) K - Union cross K 10-PL A3C 841744 L PN315 10 0.134 (0.3) RHD - Non-return valve RHD 06-PL A3K 125980 L 06 0.068 (0.15) RHD 10-PL A3K 125992 PN250 10 0.142 (0.31) 280-320_001 / AI00_2015en 1/6 MAV - Pressure gauge connector MAV 06-PLR A3C 126054 MAV 10-PSR A3C 126078 L PN315 S PN630 06 0.046 (0.1) 10 0.120 (0.26) GE - Male stud connector GE 06-PLR-ED A3C 125566 06 0.026 (0.06) GE 10-PLR-ED A3C 174666 L PN315 10 0.048 (0.11) GE 15-PLR-ED A3C 125610 15 0.116 (0.26) GE 06-PSR-ED A3C 125578 S 06 0.054 (0.1 GE 10-PSR-ED A3C 125608 PN630 10 0.088 (0.19) Page 103

Pipe element (Special) Fitting pilot pipe Unions - stock list Feature Part no. Series Pipe o.d. Weight kg (lbs) EVGE - Swivel connector EVGE 10-PLR-ED A3C 841732 L 10 0.047 (0.1) EVGE 15-PLR-ED A3C 886237 PN250 15 0.123 (0.27) WE - Male stud elbow WE 06-PLR A3C 125761 06 0.040 (0.09) L WE 10-PLR A3C 125750 10 0.082 (0.18) PN315 WE 15-PLR Ms-DPR 840752 15 0.150 (0.33 WE 06-PSR A3C 125773 TE - Male stud branch TE 15-PLR A3C 814971 S PN400 L PN315 06 0.074 (0.16) 15 0.200 (0.44) LE - Male stud run tee LE 06-PLR A3C 125876 L 06 0.051 (0.11) LE 10-PLR A3C 125890 PN315 10 0.112 (0.25) EVW - Standpipe elbow EVW 15-PL A3C 886238 L PN315 15 0.165 (0.36) EVT - Standpipe branch tee EVT 06-S A3C 886406 S PN630 06 0.102 (0.2 280-320_001 / AI00_2015en 2/6 EVL - Standpipe run tee EVL 06-PL A3C 786956 M - Nut M 06-L A3C 173959 L PN315 06 0.058 (0.13) 06 0.010 (0.020) M 10-L A3C 126133 L 10 0.016 (0.04) M 15-L Ms 861820 15 0.045 (0.1) M 06-S A3C 829656 S 06 0.017 (0.04) Page 104

Pipe element (Special) Fitting pilot pipe Unions - stock list Feature Part no. Series Pipe o.d. Weight kg (lbs) DPR - Progressive ring DPR 06-L/S A3D 208208 06 0.002 (0.0044) L/S DPR 10-L/S A3D 126091 10 0.002 (0.0044) VKA - Blanking plug for cones VKA 06-L A3C 885373 06 0.005 (0.001) VKA 10-L A3C 815008 L PN315 0.014 (0.0031) VKA 15-L A3C 814983 15 0.030 (0.07) VSTI - Blanking plug for ports VSTI R1/4-ED A3C 776387-0.018 (0.04) PN400 VSTI R1/2-ED A3C 774822-0.045 (0.1) RI - Thread reducer/expander RI 1/2 x 3/4 A3C 751060-0.180 (0.4) PN400 RI 1/2 x 1 A3C 704059-0.164 (0.36) KOR - Tube end reducer KOR 08/06-PL A3C 886263 08/06 0.039 (0.09) KOR 10/06-PL A3C 755260 L PN315 10/06 0.044 (0.1) KOR 15/10-PL A3C 755259 15/10 0.088 (0.19) EDKOR - Straight reducer connection with taper EDKOR 10L/15L A3C 886612 L PN400 10/15 0.094 (0.21) 280-320_001 / AI00_2015en 3/6 Explanation Feature e. g. Series L...light S...heavy Material A3C...steel, galvanized, yellow chrome dulled A3K...steel, galvanized, blue chrome dulled A3D...steel, galvanized, green chrome dulled Ms...brass Page 105

Pipe element (Special) Fitting pilot pipe Unions - stock list Dimension drawing Dimensions in mm (inch) G - Union SV - Bulkhead union W - Elbow union T - Union tee K - Union cross RHD - Non-return valve MAV - Pressure gauge connector GE - Male stud connector Feature S1 S2 S3 L1 l1 L2 l2 280-320_001 / AI00_2015en 4/6 G 06-PL A3C 12 (0.47) 14 (0.55) - 39 (1.54) 10 (0.39) - - G 10-PL A3C 17 (0.67) 19 (0.75) - 42 (1.65) 13 (0.51) - - G 15-PL A3C 24 (0.94) 27 (1.06) - 46 (1.81) 16 (0.63) - - SV 06-PL Ms 17 (0.67) 14 (0.55) 17 (0.67) 22 (0.87) 7 (0.28) 42 (1.65) 27 (1.06) SV 10-PL Ms 22 (0.87) 19 (0.75) 22 (0.87) 25 (0.98) 10 (0.39) 43 (1.69) 28 (1.10) SV 10-PL A3C 22 (0.87) 19 (0.75) 22 (0.87) 25 (0.98) 10 (0.39) 43 (1.69) 28 (1.10) W 06-PL A3C 14 (0.55) 12 (0.47) - - - 27 (1.06) 12 (0.47) W 10-PL A3C 19 (0.75) 17 (0.67) - - - 30 (1.18) 15 (0.59) W 15-PL A3C 27 (1.06) 19 (0.75) - - - 36 (1.4 21 (0.83) T 06-PL A3C - 14 (0.55) 12 (0.47) - - 27 (1.06) 12 (0.47) T 10-PL A3C - 19 (0.75) 17 (0.67) - - 30 (1.18) 15 (0.59) T 15-PL A3C - 27 (1.06) 19 (0.75) - - 36 (1.4 21 (0.83) Feature S1 S2 L1 S3/ D1 l1/d1 t3/g h3/i d5 K 10-PL A3C - 19 (0.75) 30 (1.18) 14 (0.55) 15 (0.59) - - - RHD 06-PL A3K 17 (0.67) 24 (0.94) 58 (2.28) 17 (0.67) 29 (1.14) - - - RHD 10-PL A3K 22 (0.87) 19 (0.75) 69.5 (2.74) 24 (0.94) 40.5 (1.59) - - - MAV 06-PLR A3C 19 (0.75) 14 (0.55) 37 (1.46) G1/4 7.5 (0.3) 14.5 (0.57) 4.5 (0.18) 2.5 (0.1) MAV 10-PSR A3C 27 (1.06) 22 (0.87) 47 (1.85) G1/2 10.5 (0.41) 20 (0.79) 5 (0.197) 7.0 (0.28) GE 06-PLR-ED A3C 14 (0.55) 14 (0.55) 23 (0.91) - 8.5 (0.33) G1/8 8 (0.31) 14 (0.55) GE 10-PLR-ED A3C 19 (0.75) 19 (0.75) 26 (1.0-11 (0.43) G1/4 12 (0.47) 19 (0.75) GE 15-PLR-ED A3C 27 (1.06) 27 (1.06) 29 (1.14) - 14 (0.55) G1/2 14 (0.55) 27 (1.06) GE 06-PSR-ED A3C 19 (0.75) 17 (0.67) - 28 (1.10) - - - - GE 10-PSR-ED A3C 22 (0.87) 22 (0.87) - 31 (1.2 - - - - Page 106

Pipe element (Special) Fitting pilot pipe Unions - stock list EVGE - Swivel connector WE - Male stud elbow TE - Male stud branch LE - Male stud run tee EVW - Standpipe elbow EVT - Standpipe branch tee EVL - Standpipe run tee Feature S1 S2 L1 S3 /D1 t3/g h3/i d5 EVGE 10-PLR-ED A3C 19 (0.75) 19 (0.75) 27.5 (1.08) 10 (0.39) G1/4 12 (0.47) 19 (0.75) EVGE 15-PLR-ED A3C 27 (1.06) 27 (1.06) 31 (1.2 15 (0.59) G1/2 14 (0.55) 27 (1.06) Feature S1 S2 S3 L1 l1 L2 l2 G/D1 i/d1 280-320_001 / AI00_2015en 5/6 WE 06-PLR A3C 14 (0.55) 12 (0.47) - - - 27 (1.06) 12 (0.47) R1/8 - WE 10-PLR A3C 19 (0.75) 17 (0.67) - - - 30 (1.18) 15 (0.59) R1/4 - WE 15-PLR Ms-DPR 27 (1.06) 19 (0.75) - - - 36 (1.4 21 (0.83) R1/2 - WE 06-PSR A3C 17 (0.67) 14 (0.55) - - - 31 (1.2 16 (0.63) R1/4 - TE 15-PLR A3C - 27 (1.06) 19 (0.75) - 34 (1.34) 36 (1.4 21 (0.83) R1/2 14 (0.55) LE 06-PLR A3C - 14 (0.55) 12 (0.47) 47 (1.85) 20 (0.78) 27 (1.06) 12 (0.47) R1/8 8 (0.31) LE 10-PLR A3C - 19 (0.75) 17 (0.67) 57 (2.24) 27 (1.06) 30 (1.18) 15 (0.59) R1/4 12 (0.47) E 15-PL A3C - 27 (1.06) 19 (0.75) - 32,5 (1.28) 36 (1.4 21 (0.83) 15 (0.59) - EVT 06-S A3C - 17 (0.67) 12 (0.47) - 27 (1.06) 31 (1.2 16 (0.63) 6 (0.24) - EVL 06-PL A3C - 14 (0.55) 12 (0.47) 53 (2.09) 26 (1.0 27 (1.06) 12 (0.47) 6 (0.24) - M 06-L A3C - 14 (0.55) - - - - - - - M 10-L A3C - 19 (0.75) - - - - - - - M 15-L Ms - 27 (1.06) - - - - - - - M 06-S A3C - 17 (0.67) - - - - - - - Page 107

Pipe element (Special) Fitting pilot pipe Unions - stock list M - Nut DPR - Progressive ring VKA - Blanking plug for cones VSTI - Blanking plug for ports RI - Thread reducer/expander KOR - Tube end reducer EDKOR - Straight reducer connection with taper Feature S1 S2 M/G i L d1 d2 d3 280-320_001 / AI00_2015en 6/6 M 06-L A3C - 14 (0.55) M12x1,5-9.5 (0.37) - - 6 (0.24) M 10-L A3C - 19 (0.75) M16x1,5-10 (0.39) - - 10 (0.39) M 15-L Ms - 27 (1.06) M22x1,5-10 (0.39) - - 15 (0.59) M 06-S A3C - 17 (0.67) M14x1,5-9.5 (0.37) - - 6 (0.24) DPR 06-L/S A3D - - - - 9.5 (0.37) - - 6 (0.24) DPR 10-L/S A3D - - - - 10 (0.39) - - 10 (0.39) VKA 06-L A3C - - - - 18.5 (0.73) - - - VKA 10-L A3C - - - - 20 (0.79) - - - VKA 15-L A3C - - - - 20.5 (0.81) - - - VSTI R1/4-ED A3C - - G1/4 A 12 (0.47) 17 (0.67) 19 (0.75) 6 (0.24) - VSTI R1/2-ED A3C - - G1/2 A 14 (0.55) 19 (0.75) 27 (1.06) 10 (0.39) - RI 1/2 x 3/4 A3C 24.5 (0.96) - G1/2 A 14 (0.55) 46 (1.81) G3/4-26 (1.0 RI 1/2 x 1 A3C 26.5 (1.04) - G1/2 A 14 (0.55) 49 (1.93) G1-26 (1.0 KOR 08/06-PL A3C 17 (0.67) 14 (0.55) M14x1,5 23.5 (0.93) 38 (1.5) 8 (0.31) 6 (0.24) - KOR 10/06-PL A3C 19 (0.75) 14 (0.55) M16x1,5 23.5 (0.93) 38 (1.5) 10 (0.39) 6 (0.24) - KOR 15/10-PL A3C 27 (1.06) 19 (0.75) M22x1,5 24.5 (0.96) 39 (1.54) 15 (0.59) 10 (0.39) - EDKOR 10L/15L A3C 27 (1.06) 19 (0.75) - - ~36 (~1.4 15 (0.59) 10 (0.39) - Page 108

Pipe element (Special) Bracket pilot piping network Cable clip B16 galv. part no. 813589: Cable clamp B 16 galvanized functional check within the framework of system-specific functional test Designation Part no. Weight Cable clip B16 galvanized 813589 0.023 kg (0.05 lbs) Technical Data Application...CO 2 - systems Installation...vertical or horizontal Installation example: 280-330_001 / AI00_2015en 1/1 Pos. Designation Part no. Gewicht Gewicht Pos. Designation Part no. kg (lbs) kg (lbs) 1 steel pipe 6 x 1 - Zista 823563 1) 0.13 (0.29) 6 profil type HM 315-FV-L 811465 1.2 (2.65) 2 steel pipe 10 x 1 - Zista 823575 1) 0.22 (0.49) 7 U - bolt M1-16-01 3 steel pipe 15 x 1,5 - Zista 240020 1) 0.5 (1.1) washer DIN9021 - B8,4 110029 0.006 (0.01) 4 pipe system DN20 - DN200 8 washer DIN9021 - B10,5 110042 0.012 (0.03) 5 cable clip B16 galv. 813589 0.023 (0.05) washer DIN9021 - B13 116123 0.023 (0.05) 1) length on stock 6 m (19.7 ft) length on stock 2 m (6,6 ft) Page 109

Pipe element (Special) Bracket pilot piping network Hose clip DIN 3017 and pipe clip RSGU1. Pos. Designation Extinguishing Pipe Part no. Weight kg (lbs) S 34/15 DN25 886839 0.01 (0.0 Hose clip DIN 3017 S 43/9 DN32 870150 0.01 (0.0 S 49/9 DN40 870162 0.01 (0.0 1 S 61/15 DN50 870174 0.03 (0.07) S 77/15 DN65 870186 0.04 (0.09) S 89/15 DN80 870198 0.04 (0.09) S 115/20 DN100 870204 0.10 (0.2 6/15 870230 0.008 (0.0 DN25 Pipe clip RSGU1. 10/15 870241 0.01 (0.0 2 6/9 870216 0.003 (0.01) DN32 / DN40 10/9 870228 0.004 (0.01) 6/15 870230 0.008 (0.0 DN50 / DN65 / DN80 10/15 870241 0.01 (0.0 6/20 870253 0.017 (0.04) DN100 10/20 870265 0.02 (0.04) Technical Data Finish...galvanized Hose clip e.g. S 34/15...clamping range 34 mm (1,34")...clip band with 15 mm (0,59") Pipe clip RSGU1. e.g. 6/15...for control pipe 6x1,...clip band with 15 mm (0,59") part no. 886839: Hose clip DIN3017-S 34/15 gal Zn functional check within the framework of system-specific functional test Mounting illustation: 280-330_002 / AI00_2015en 1/1 Pos. 1 hose clip DIN 3017 type S for extinguishing pipe DN25-100 Pos. 2 pipe clip typ RSGU1. for control pipe 6x1 and 10x1 Page 110

Pipe element (Special) Accessories flange connection Gaskets PN160 part no. 773647: Sealing DN65-PN160 functional check within the framework of system-specific functional test Designation DN Part no. Weight kg (lbs) 65 773647 0.03 (0.07) Gasket PN160 80 773659 0.04 (0.09) 100 773684 0.04 (0.09) Material Klingersil C4400 asbestos-free, silicone-free Application Welding-neck flanges according to DIN2638 - PN160 (2320 psi) Dimension drawing Dimensions in mm (inch) 280-810_001 / AI01_2016en 1/1 DN d 1 d 2 h 65 70 (2.76) 122 (4.80) 80 82 (3.23) 138 (5.43) 100 106 (4.17) 162 (6.38) Page 111 1.5 ±0.2 (0.06 ±0.01)