Technical Information HXV - HRV Ventilation

Technical Information HXV - HRV Ventilation General description Technical data Accessories

VENTILATION HXV 5 1 General description 1.01-1.02 2 Technical data 2.01-2.02 3 Accessories 3.01-3.03 HRV 5 4 General description 4.01-4.02 5 Technical data 5.01-5.02 6 Accessories 6.01-6.01 With reservation for changes and misprints.

1 GENERAL DESCRIPTION General description HXV 5 FUNCTION HXV 5 is the perfect ventilation solution to create and maintain a healthy living environment. The unit is supplied as standard with a user-friendly control panel in a modern design. APPLICATION HXV 5 is particularly suitable for apartments and 1 or 2 bedroom residential homes of between 80 and 200 m 2 where an air change rate of 0.5 / hour is required. INSTALLATION The HXV 5 compact dimensions and light weight ensure that it can be placed instead of a standard 60 cm wide wall unit closet. The HXV 5 flexible configuration means that it can easily be converted to left or right hand installation. The HXV 5 unit can be installed in a utility room with the control panel remotely located to suit the homeowner. CHARACTERISTICS Easy to operate and service Compact dimensions Variable air volume Built-in electric heater for supply air Heat exchanger frost protection Filter change timer with audible alarm Summer ambient cooling using adjustable by-pass damper Configurable for left or right hand installation 2 3 1 4 ILLUSTRATION OF AIR FLOW IN HXV 5 1 Fresh air intake 2 Supply air 3 Return air 4 Exhaust air 1.01

ACCESSORIES 1 CONTROL PANEL Operation of the HXV 5 is extremely user-friendly using the standard control panel. Simply select the required air volume from one of 4 pre-sets. In addition there are two LED s to indicate when the unit and heating element are in operation and an audible alarm for the filter guard. The control panel is connected to the unit using a 12 metre RJ45 cable. Additional functions are offered with the high end user panel which can be selected as an optional accessory. Air volume setting Filter guard (audible alarm) ON/OFF LED for electric heating element ON/OFF LED for unit operation PART NUMBERS Standard model HXV 5 unit plus standard control panel. Dantherm No. 031366 1.02

2 TECHNICAL DATA Technical data Heat exchanger type Cross flow heat exchanger Efficiency % up to 70% Max. air volume m 3 /h 360m 3 /h at 150 Pa Power supply V/Hz 230 V/50Hz Operating temperature range C -20 to +50 Max power consumption with and without electric heating element Watt 874/374 Sound level (1 meter from the cabinet) db(a) 44* Weight kg 36,5 Colour (cabinet and panel) RAL 9016 Protection class IP 44 Duct connection mm Ø125 Filter types F/G G3 exhaust air and G3 plus F7 supply air Material, cabinet Hot galvanized steel Material, control panel Polystyrene * at max. fan speed DIMENSIONS All dimensions are in mm. 2.01

TECHNICAL DATA 2 PERFORMANCE CURVES 350 Air Volume Performance Curves of HXV 5 300 Available Pressure Pa 250 200 150 100 50 0 0 50 100 150 200 250 300 350 400 E4=exhaust 100% air volume E4=exhaust 70% air volume E4=exhaust 50% air volume E1=exhaust 25% air volume S4=supply 100% air volume S4=supply 70% air volume S4=supply 50% air volume S1=supply 25% air volume Air Volume m 3 /h Please note: HXV 5 has four different settings for air volume, where each setting can be set between 25 and 100%. The performance curves for max. air volume (E4; S4) shown are not the factory setting. The factory setting corresponds to approx. 70% of the stated max. air volume (E3; S3). The performance curves E2; S2 (= 50% air volume) and E1; S1 (= 25% air volume) correspond to the factory setting for these two air volumes. E4 S4 E3 S3 E2 S2 E1 S1 TEMPERATURE EFFICIENCY 100 Supply Air Heat Recovery Efficiency of HXV 5 90 80 70 Efficiency % 60 50 40 30 20 10 0 0 50 100 150 200 250 300 350 400 Exhaust Air Volume m 3 /h Conditions: t fresh air = 4 C, t return air = 20 C and RH return air = 50%. 2.02

3 ACCESSORIES Accessories HIGH END CONTROL PANEL The high end panel has the following key functions: 4 Variable fan speed settings Control of relative humidity (RH) Fire place function Ability to connect up to 5 high end panels to the unit in series Control of air quality (AQ) Dantherm No. 036418 FIRE PLACE FUNCTION The fire place function is a help when e.g. the wood burning stove, fireplace or the like is to be lit. The function disables the exhaust air fan for 15 minutes by which the inlet fan established an overpressure in the house. AIR QUALITY (AQ) The high-end control panel provides the user with the option to control both the relative humidity and air quality levels. Air quality is maintained by entering a value of between 0 and 100 into the control panel. An air quality value of 30-40 (100 is perfect air quality) is normally considered as a good and healthy level but it is recommended that the user establish their own personal comfort level by monitoring and adjusting the levels over a period of time. Once a value is entered, the HXV 5 continually automatically adjusts the air volume to maintain the air quality to the specified value. This ensures that the unit is constantly operating at the optimum level to maintain the conditions and as a result considerable operating cost savings can be achieved when compared to the standard control panel. LPHW HEATING COIL A LPHW coil can be connected within the unit. This operates not via the controller, but uses its own thermostat in conjunction with a remote sensor. Dantherm No. 035579 3.01

ACCESSORIES 3 Calculation of heat emission from the LPHW heating coil and t 1,2 1 Water flow l/s 0,05 0,03 Air flow 70 l/s 50 l/s Heat output (kw) 0,8 0,6 0,4 0,2 0 10 15 20 25 30 35 Temperature of air leaving the LPHW heating coil C 30 l/s 20 l/s 55 C 45 C 35 C 25 C Assumption: Temperature of air coming to the LPHW is 12 C. Example: t water, flow = 55 C, Q water = 0,05 l/s Qair = 70 l/s = 1 kw & tair, return = 24 C tair = 12 C 1,2 Water flow l/s 0,05 0,03 1 Heat output (kw) 0,8 0,6 0,4 0,2 0 0 2 4 6 8 Example: = 1 kw twater = 5 C twater, return = 55-5 = 50 C t water C 3.02

3 ACCESSORIES HUMIDITY CONTROLLER A humidity sensor can be connected to the standard control panel which will switch the unit to maximum speed when the relative humidity is above the desired level. Dantherm No. 016361 RJ 45 CABLE RJ45 cable, white, 12 metres, male plugs both ends, straight connection. Dantherm No. 032985 CONDENSATION PREVENTING PLATE - WALL SUSPENSION Prevents condensation/moisture entering the ceiling construction via ducting holes. Dantherm No. 035484 CEILING SUSPENSION AND CONDENSATION PREVENTING PLATE The condensation preventing plate prevents moisture from entering the ceiling construction via ducting holes. Dantherm No. 036422 PANEL FILTER PACK 3X3 To ensure optimal performance of the unit filters should be changed regulary. The filter pack contains nine filters (three pos. F7 and six pos. G3). Dantherm No. 032798 3.03

GENERAL DESCRIPTION 4 General description HRV 5 FUNCTION HRV 5 is the perfect ventilation solution to create and maintain a healthy living environment. The HRV 5 unit is supplied as standard with a user-friendly wireless remote control in a modern design. APPLICATION HRV 5 is particularly suitable for apartments and 1 or 2 bedroom homes of between 80 and 200 m 2 where an air change rate of 0.5/hour is required. INSTALLATION The HRV 5 compact dimensions ensure that it can be placed instead of a standard 60 cm wide wall unit closet. The HRV 5 can be installed in a utility room or cupboard and controlled anywhere in the home using the wireless remote. CHARACTERISTICS Wireless remote control High efficiency of up to 80% Variable air volume with 3 speed settings Week programmer Summer mode WIRELESS REMOTE CONTROL The wireless remote control communicates via an antenna signal and has an operating range of approx. 100m (free field). The remote control enables the user access to the following key functions: Week programmer set different air volumes for different time periods 3 speed fan speed / air volume settings Summer mode Filter change timer with alarm Running data readout 4.01

4 GENERAL DESCRIPTION OPTIONAL HYGROSTAT If an optional hygrostat (see accessories) is connected, the unit will increase to fan speed 3 when the set relative humidity value is exceeded. The unit will return to the original fan speed when the humidity level has been reduced. 2 3 1 4 ILLUSTRATION OF AIR FLOW IN HRV 5 1 Fresh air intake 2 Supply air 3 Return air 4 Exhaust air ROTARY HEAT EXCHANGER The HRV 5 is fitted with a rotary heat exchanger. In a rotary heat exchanger heat is transferred from the extract air to the metallic surface of the rotor, which finally transfers the heat to the supply air. The rotary heat exchanger is a particularly good solution at temperatures below 0 C as unlike traditional crossflow and counterflow heat exchangers, there is no risk of ice formation. As a result no preheating is required which makes the rotary heat exchanger an energy-friendly solution with very low running costs. The rotary wheel is stopped in summer mode to provide fresh air cooling during the night. This is automatically activated when the outdoor temperature exceeds a preset value and therefore heat recovery is not required. PART NUMBERS Standard model HRV 5 unit plus remote controller Dantherm nr. 026836 4.02

TECHNICAL DATA 5 Technical data Heat exchanger type Rotary heat exchanger Efficiency % Up to 80% Max. air volume m 3 /h 340m 3 /h at 150 Pa Power supply V/Hz 230 V/50Hz Operating temperature range C -20 to +50 Max. power consumption with and without electric heating element* Watt 900/270 Sound level (1 meter from the cabinet) - at 1000 r.p.m. db(a) 43,6 - at 1500 r.p.m. db(a) 45,7 - at 2000 r.p.m. db(a) 49,8 Weight kg 55 Colour RAL 9016 Protection class IP 44 Duct connection mm Ø160 Filter type F/G G4 extract and F7 supply air Material, cabinet Powder painted hot galvanized steel Material, remote control ABS plastic *incl. rotor motor DIMENSIONS 612,1 592,6 821,4 101,9 281,9 251,9 481,9 131,2 17 356,2 476,2 160 56 Ø160 All dimensions are in mm. 5.01

5 TECHNICAL DATA PERFORMANCE CURVES 300 Air Volume Performance Curves of HRV 5 250 Available Pressure Pa 200 150 100 50 SFP = 1200 J/m 3 0 0 50 100 150 200 250 300 350 400 450 500 E4=exhaust 100% air volume E3=exhaust 70% air volume E2=exhaust 50% air volume E1=exhaust 25% air volume S4=supply 100% air volume S3=supply 70% air volume S2=supply 50% air volume S1=supply 25% air volume Air Volume m 3 /h Please note: HRV 5 has three different settings for air volume, where each setting can be set between 25 and 100%. The performance curves for max. air volume (E4; S4) shown are not the factory setting. The factory setting corresponds to approx. 70% of the stated max. air volume (E3; S3). The performance curves E2; S2 (= 50% air volume) and E1; S1 (= 25% air volume) correspond to the factory setting for these two air volumes. E4 S4 E3 S3 E2 S2 E1 S1 TEMPERATURE EFFICIENCY 100 Supply Air Heat Recovery Efficiency of HRV 5 90 80 70 Efficiency % 60 50 40 30 20 10 0 0 50 100 150 200 250 300 350 400 Exhaust Air Volume m 3 /h Conditions: t fresh air = 4 C, t return air = 20 C and RH return air = 50%. 5.02

ACCESSORIES 6 ELECTRIC HEATING ELEMENT, 630W With an electrical heating element installed, the supply air temperature can be increased by approx. 7-8 C (at 200 m 3 /h). The heater capacity is modulating from 63 to 630W to provide stable supply air temperatures. When the heating element is active it will be indicated on the remote control. Dantherm No. 041711 ADDITIONAL REMOTE CONTROL The unit can be paired with additional remote controls to give flexibility. Dantherm No. 041709 DANTHERMNHYGROSTAT (INCL. 3 M CABLE) The hygrostat can be mounted in bathrooms to provide boost dehumidification after showering. With this function the unit will run on maximum speed when the hygrostat detects high RH. Dantherm No. 041704 ALARM CABLE Used for the optional connection of external light or audible alarms to alert the user in the event of unit component failures. Alarm accessories are not available from Dantherm. Cable length 3,5 m, Mini-Fit Jr. connector. Dantherm No. 041708 DANTHERMNO. 0417FILTERS To ensure optimal performance of the unit filters should be changed regularly. The filter pack contains one F7 supply air filter and one G4 extract air filter. Dantherm No. 031831 6.01

Since 1958 Dantherm Air Handling has developed and produced climate control and air handling solutions that ensure optimum conditions for people and sensitive equipment alike. No climate is too extreme for us to handle from the bitter cold at the North and South Poles to the searing heat of the Sahara. Our core business areas are dehumidification, heating, air conditioning, ventilation and electronics cooling. Innovative, durable and cost-efficient products have secured us a position as a leading global manufacturer of stationary and mobile climate control units. And we are forever pursuing new techniques that will improve our solutions and ultimately your projects. Our Head Office is located in Denmark, and we have companies in Denmark, Norway, Sweden, the United Kingdom, the United States and China, with an extensive European dealer network. Dantherm Air Handling is part of the Dantherm A/S group. HEAD OFFICE COMPANIES Dantherm Air Handling Holding A/S Marienlystvej 65 DK-7800 Skive Denmark Tel.: +45 9614 3700 Fax: +45 9614 3800 E-mail: dantherm.dk@dantherm.com www.dantherm-air-handling.com DENMARK Dantherm Air Handling A/S Marienlystvej 65 DK-7800 Skive Denmark Tel.: +45 9614 3700 Fax: +45 9614 3800 E-mail: dantherm.dk@dantherm.com www.dantherm-air-handling.com NORWAY Dantherm Air Handling AS Løkkeåsveien 26 N-3138 Skallestad Norway Tel: +47 33 35 16 00 Fax: +47 33 38 51 91 E-mail: dantherm.no@dantherm.com www.dantherm-air-handling.com CHINA Dantherm Air Handling (Suzhou) Co., Ltd. Bldg. # 9, No. 855 Zhu Jiang Rd. Suzhou New District, Jiangsu 215219 Suzhou China Tel.: +86 512 6667 8500 Fax.: +86 512 6667 8501 E-mail: dantherm.cn@dantherm.com www.dantherm-air-handling.com ENGLAND Dantherm Air Handling Ltd. 12 Windmill Business Park Windmill Road Clevedon North Somerset BS21 6SR United Kingdom Tel.: +44 (0) 1275 876851 Fax: +44 (0) 1275 343086 E-mail: dantherm.co.uk@dantherm.com www.dantherm-air-handling.com USA Dantherm Air Handling Inc. 4260 Orchard Park Blvd, Spartanburg South Carolina 29303-4400 USA Tel.: +1 864 595 9800 Fax: +1 864 595 9810 E-mail: dantherm.usa@dantherm.com www.dantherm-air-handling.com SWEDEN Kontrollelektronik Dantherm Air Handling AB Virkesgatan 5 SE-614 31 Söderköping Sweden Tel.: +46 (0) 121-130 40 Fax: +46 (0) 121-133 70 E-mail: info@kontrollelektronik.se www.kontrollelektronik.se