Taiwantrade Supplier Business Information Verification Report

Similar documents
Taiwantrade Supplier Business Information Verification Report

Taiwantrade Supplier Business Information Verification Report

CEN standardization work on refrigerating systems, especially standard EN 378

SUNON SPECIFICATION FOR APPROVAL

CERTIFICATE. Issued Date: Dec. 23, 2010 Report No.: 10C142R-ITCEP7V05

SUNON SPECIFICATION FOR APPROVAL

T.Y.C. BROTHER IND. CO., LTD.

SUNON SPECIFICATION FOR APPROVAL. CUSTOMER : DESCRIPTION : AC BLOWER DIMENSIONS : 120X120X31 mm M O D E L : AB2123-HST P/N : GN

SB/ESB SERIES THERMAL PROTECTORS

SUNON SPECIFICATION FOR APPROVAL

SUNON SPECIFICATION FOR APPROVAL : SUNON INC : SPEC.NO D G-00 ISSUE DATE Dolphin 7/19 REVISION DATE

TEMPORARY IMMERSION AND DUST TEST REPORT

EU Declaration of Conformity

It is my pleasure to welcome you to the world of Kravet Inc. fabrics and furnishings.

SUNON SPECIFICATION FOR APPROVAL. ISSUE DATE Alice

SUNON SPECIFICATION FOR APPROVAL

CERTIFICATE. Issued Date: Apr. 16, 2014 Report No. : R-ITCEP11V04

Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories

Management Systems Certification Ltd

CE marking & your legal obligations

3NT SERIES FIXED TEMPERATURE THERMOSTATS Introduction

Your Key to achieving C.E Marking Compliance

M7100 Pressure Transducer

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

Safety of Electrical Installations

RP SERIES THERMAL PROTECTORS

PV Ribbon Hi-speed Tin-plating Machine List

CE marking & your legal obligations

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY

WT7502 PC POWER SUPPLY SUPERVISOR. Data Sheet REV Feb. 26, 2008

Test Report. Appliance EMF Testing

Record of Amendments. Version Date Amendment Section/page affected

Energy Efficiency Schemes Brief Introduction

General knowledge on the Energy labelling. LabelPackA+ Place, Date

17 TH APRIL 2017 Switch Board Monitoring Protecting Switchboard. Courtesy of ABB. Paul Lee

TECHNICAL SPECIFICATION

Mission 份有限公司 wwwom 先锋科技股份有限公司 www Working with our customers we identify, design and deliver low light detection solutions which solve customer probl

Non-domestic gas installations (Edition 2)

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY


Operating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content

TEST REPORT IEC60529 Edition TD990426C02

Product Compliance Andy Guest

SPECIFICATION FOR APPROVAL

SUNON SPECIFICATION FOR APPROVAL. ISSUE DATE Jeff

Mission 份有限公司 wwwom 先锋科技股份有限公司 www Working with our customers we identify, design and deliver low light detection solutions which solve customer probl

POWER PLANTS BETONJERKA JSC ALEKSINAC

SUNON SPECIFICATION FOR APPROVAL : MF50152V1-1000U-A99 SUNON SPEC. NO. : D G-00 CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER.

Catalogue. Show Introduction Exhibitors Statistic Visitors Statistic Exhibitor s List Floor Plan Show Gallery...

DUST TEST REPORT. :Gold Apollo Co., Ltd. Company Model Name :A27. Date of Received :APR. 19, 2006 Date of Tested :APR. 19, 2006

Where Process Safety meets Machine Safety

Public Notice of Amendment to New Shoreham General Ordinances Chapter 5 Fire Prevention and Protection New Article IV Fire Alarm Ordinance

PART 3-O REQUIREMENTS FOR SPRINKLER SYSTEMS MAINTENANCE AND SUPERVISION. 3-O Introduction O.1 Scope of Maintenance and Supervision...

INTRODUCTION HISTORY. Enfocus Software - Customer Support

BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY


6600 SERIES 8-Pin DIP, Subminiature Bimetal Disc Thermostat

CEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2)

Compilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY

TECHNICAL SPECIFICATION

EMIRATES CONFORMITY ASSESSMENT SCHEME (ECAS): ECASEx COMPLIANCE

Official Journal of the European Union. (Non-legislative acts) REGULATIONS

PERSPECTIVEÎNSECURITATEAPRIVATĂ-VALOAREASOCIALĂA SERVICILORDESECURITATE PERSPECTIVESINPRIVATESECURITY SOCIALVALUEOF SECURITYSERVICES

BUSINESS PLAN. CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY


Fully configurable SIL2 addressable Fire & Gas Detection solutions

This follows similar work previously conducted by Bureau Veritas for Nestlé S.A. in other global operations.

Automation, Software und Informationstechnologie

Guide to Membership Assessments

Valve Manufacturers Association of America

Technical Manual. LeakFilm 5. 5 Channel Conductive Liquid Leak Detection Controller

Measurement of Safety Integrity of E/E/PES according to IEC61508

Energy Labels. Common appliance policy All for one, One for all

This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)


TECHNICAL SPECIFICATION

USCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE

Definitions; contractors licensed by Board; examination; posting license, etc.

EU Declaration of Conformity

The Importance of Pressure Sensors in HVACR Systems

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

MAURITIUS MUSEUMS COUNCIL INVITATION FOR THE REGISTRATION OF SUPPLIERS FOR YEAR

Global Industrial Agitator Market Research Report 2021

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

DID YOU GET USED TO THE NEW CPR? HERE S A QUICK REVIEW!

APPROVED PANEL OF SWITCHBOARD MANUFACTURERS FOR THE SUPPLY OF LOW VOLTAGE SWITCHBOARDS

TruVision Bullet IR Camera Pocket Guide

CERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh

AUGUST 2016 CONTENTS:

BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY

Corporate Fact Sheet

The New Battery Safety Standard EN for LEV s. Stephan Scheuer TÜV Rheinland

European Technical ETA-15/0815 Assessment of 1 February 2016 General Part

Operating instructions Safety-monitoring module SRB 302X3. 1 About this document

EU Declaration of Conformity

Membership Application

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY

Transcription:

Taiwantrade Supplier Business Information Verification Report Company Address: City / Country: Presented to SUN MINES ELECTRICS CO., LTD. 三敏電機股份有限公司 7F,No.153,Sec. 3,Beishen Rd., Shenkeng Dist., New Taipei City 22203, Taiwan (R.O.C.) New Taipei / Taiwan (R.O.C.) Contact Person: Ms. Milly Cheng Phone Number: +886 2 2662 9292 Fax Number: +886 2 2662 7575 Email: Taiwantrade Website Address: info@sunmines.com.tw http://sunmines.en.taiwantrade.com/ Offsite verification was conducted by TÜV Rheinland Taiwan Ltd. Report No.: 0000048570 003 1 P a g e V e r s i o n. 2 0 1 610-01.2

Report Number: 0000048570 003 Verification Type: Offsite Verification Date of Verification: 2018/04/23 Auditor`s Name: Jenny Lee Report Date: 2018/08/01 Reviewed By: Vito Lin Important Notes: Certificate type : Taiwantrade Supplier Business Information Verification The verification certificate for Taiwantrade supplier aims to ensure the qualification of a supplier who is going to join Taiwantrade e-commerce platform. Business information such as company name/address, email address, company ID, telephone number, employee number, revenue, main product, management personnel, etc. will be verified by TÜV Rheinland Taiwan to guarantee the authenticity. After that, verification certificate and test mark will be issued with validity of one year. TÜV Rheinland Taiwan`s Disclaimer: This report reflects our findings for the particular company in concern on the date of our service only. This report does not discharge or release the factory/sellers/suppliers from their commercial, legal or contractual obligations with buyers in respect of products provided by the factory/sellers/suppliers. Any reader other that the party for which this report has been specifically issued is hereby informed that the General Conditions of Service of TÜV Rheinland contain liability limitation provisions. 2 P a g e V e r s i o n. 2 0 1 610-01.2

Section 1: Basic Information Basic Information Company Registered Address: 7F,No.153,Sec. 3,Beishen Rd., Shenkeng Dist., New Taipei City 22203, Taiwan (R.O.C.) Factory Registered Address: Factory 1 Business Registration No.: 84489222 Company E-mail: info@sunmines.com.tw Website Address: http://www.blowtac.com.tw Taiwantrade Website Address: Section 2: Operation Information Operation Information Date of Incorporation: 1993/11 7F,No.153,Sec. 3,Beishen Rd., Shenkeng Dist., New Taipei City 22203, Taiwan (R.O.C.) http://sunmines.en.taiwantrade.com/ Amount of Capital: TWD 15,000,000 Sole Proprietorship / Partnership Limited Company Type of Company Incorporated Company Ownership: Stated Owned Others No. of Employees: 1~100 101~500 501~1,000 More than 1,000 Manufacturer Wholesaler Retailer Scope of Business: Trading Company Others Main Products: Submersible Pump, Blower, Air Pump, Compressor, Aeration Equipment, Wastewater Treatment Equipment. Section 3: Management Information Management Information Name: Peter Chen Company Representative 1: Department : Title: Sales Department General Manager Date of Assumption of Duty: 1994/01 Company Representative 2: Name: Department : Title: Milly Cheng Sales Department Assistant Manager Date of Assumption of Duty: 1996/08 3 P a g e V e r s i o n. 2 0 1 610-01.2

Section 4: Business Certification Business Certification Certification Certificate No. Certificate Expiry Date D-U-N-S Number: 65-868-8890 (This Number is permanent.) 2015/12/19 D&B D-U-N-S Registered Certificate Section 5: Export Capacity Export Capacity Total Revenue(Year 2016): TWD 80,000,000 Total Export Revenue (Year 2016): Market Distribution (Year 2016): TWD 64,000,000 America 70.5% Europe 7% Asia 20% Oceania 2.5% Africa 0% Section 6: R&D Capacity and Production Capability R&D Capacity and Production Capability Research Personnel in Company Total Productivity (Year 2016): Yes No Membrane Diffusers : 10,000 Linear Air Pumps : 5,000 Mini Air Compressors : 2,000 Surface Aerator : 1,000 Blower : 500 Main Production Machinery Machinery Name Production Unit pcs Quantity Machinery 1 Cf-1000a Ac Power Supply 2 Machinery 2 Bearing Into The Hydraulic Press Machine 1 Machinery 3 The Motor Engagement Hydraulic Machine 1 Machinery 4 Tapping Machine 1 4 P a g e V e r s i o n. 2 0 1 610-01.2

Machinery 5 Inserter Rod Bearing 1 Machinery 6 Rod Pressure Ring Press-In Machine 1 Section 7: Product Certification Product Certification Product Name Mini Air Compressor Mini Air Compressor Side Channel Blower Roots Type Blower Roots Type Blower AIR PUMP Model Certification Date of Issue TC-30T, TC-20, TC-20S, TC-20T, TC-20TS, TC-30, TC-30S, TC-30TS, TC-30TU TC-30T RS Series MRT Series MRV Series AP series EN 61000-6-4 : 2007+A1:2011, EN 61000-6-2 :2005, EN 61000-3-2 : 2006+A1: 2009+A2:2009, IEC 61000-4-3 : 2006+A1: 2007+A2:2010, IEC 61000-4-5 : 2015/08/21 2005+corr.October:2009, IEC 61000-4-8 : 2009, IEC 61000-4-2: 2008, EN 61000-3-3 : 2008, IEC 61000-4-4 : 2012, IEC 61000-4-6 : 2013 EN 1012-1:2010 2015/08/06 Clause 18 of EN 2015/08/06 60204-1:2006/AC:2010 Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, 2016/10/20 EN ISO 12100:2010, EN ISO 13849-1:2015, EN 60204-1:2006/AC:2010 Machinery Directive 2006/42/EC, EN ISO 12100:2010, 2015/12/18 EN 1012-1:2010 Machinery Directive 2006/42/EC, EN ISO 12100:2010, 2015/12/18 EN 1012-1:2010 EMC Directive 2004/108/EC, EN 55014-1:2006/A2+2011, IEC 61000-3-2:2005+ A1:2008+A2:2009, 2015/12/02 IEC 61000-3-3:2013, EN 55014-2:1997/A2:2008 Category I 5 P a g e V e r s i o n. 2 0 1 610-01.2

LINEAR AIR PUMPS(MAG NETIC DIAPHRAGM AIR PUMPS) AIR PUMPS AP-40L AP-100L, AP120L, AP-150L, AP-15L, AP-200L, AP-40L, AP-60L, AP-6L, AP-80L RoHS Directive 2011/65/EU(Directive 2002/95/EC being recast by Directive 2011/65/EU) UL 2014/11/26 Last Updated on 2015/07/17 - End of Report - 6 P a g e V e r s i o n. 2 0 1 610-01.2