Additional reaction to fire classification report No H

Similar documents
Reaction to fire classification report No C-rev.1

Reaction to fire classification report No C

Reaction to fire classification report No B

gent warn nfire No, 16209C Reaction to fire class ification report lntroduction Owner of the classification report

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

TFI Report Classification

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Additional Reaction to Fire Classification Report

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

TFI Report Classification

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

Classification report

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION REPORT

Classification Report

Analysis Report

Centrum stavebního inženýrství a.s.

DELTA Classification Report

Test Report: ICL/CR15/11/087

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

Form: KSD-100:10 Page 1 of 3

Contact person Date Reference Page Richard Johansson P (2) Fire Research

CPD Seminar: Importance of Reaction-to-Fire Properties of Materials: Combustibility, Spread of Flame and Smoke Generation

Reaction to fire testing of Vescom vinyl wall covering with a Fibre Structure, a total weight of 550 g/m 2 according to EN 13823:2002

Construction Products Regulation (CPR) and BS 6701

Classification of reaction to fire performance in accordance with EN : A1: 2009 on Superfoil SFNC. Prepared for:

Classification of reaction to fire performance in accordance with BS EN : A1: 2009 on Sandwich Panel, WP 50.

BS EN 13823: A Report To: Contra Vision. Document Reference: Date: 25 th November Issue No.: 1

CPR: EUROCLASSIFICATION & TESTS FOR CABLES

PUBLIC SUMMARY REPORT OF THE EGOLF EN 13823

1. Terms defined in the Construction Products Regulation (CPR)

New European Fire Testing Classification for Construction Products

CLASSIFICATION IN REGARD OF REACTION TO FIRE according to EN :2007

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

BS EN 13823: A Report To: Durabuild Technologies Pvt. Limited. Document Reference: Date: 22 nd February Issue No.

Centrum stavebního inženýrství a.s.

AFIREFENIX SZ1-K 0,6/1 kv PH120 (AS+)

YOUR GUIDE TO UNDERSTANDING CPR

Üntel is ready for CPR

TNO report. Centre for Fire Research Van Mourik Broekmanweg 6 P.O. Box AA Delft. T F

DID YOU GET USED TO THE NEW CPR? HERE S A QUICK REVIEW!

Frequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry

The New Generationn of Firedoors

BS EN ISO : 2010

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

IMO Resolution MSC 61(67): Annex 1: Part 2

BS EN ISO : 2010

CE marking of fire-resistant doors the right way!

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

Co-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU

Centexbel. General certification regulations. Construction products

New European Cable Testing and Classification

BS EN ISO : 2010

Analysis Report

CONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE

Classification Report Reaction to fire of building elements DIN EN :2007. Class E

Harmonisation and equivalence of reaction-to-fire performance classification in Europe: a small-scale desk-based study

REACTION TO FIRE TESTS FOR BUILDING PRODUCTS DETERMINATION OF THE HEAT OF COMBUSTION ACCORDING TO STN EN ISO 1716: 2003

BS EN ISO : Fire Tests For Determination Of The Burning Behaviour of Floorings. WF Report Number. Date: 16 th November 2009.

Construction Products Regulation (CPR)

ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS

MFPA Leipzig GmbH Prüf-, Überwachungs- und Zertifizierungsstelle für Baustoffe, Bauprodukte und Bausysteme

White paper. Construction Product Regulations* by Multimedia Connect. Which cables are concerned by these new regulations?

Test Report: ICL/H18/9039 Rev 1

Review Fire Test Report

Technical Bulletin CE marking: from 1st July 2013

SBI. Single Burning Item - EN THE BENCHMARK IN FIRE TESTING

Your Key to achieving C.E Marking Compliance

Firetect C. Fire protective products: Fire protective board

best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to

GNB-CPR Position Paper: Issuance of certificates under CPR

BS 476: Part 7: 1997 on K-Flex IN Clad Foil. Prepared for: L'Isolante K-Flex Srl Via Leonardo da Vinci, RONCELLO (MB) Italy

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

CEPE guidance to a quality control fire test regime for intumescent coatings Date of issue: 24 May 2011

Construction Products Directive

~,oeti. Report VN Classification Report. Reference

Construction Products Regulation (CPR) and cables. British Cables Association Guidance to Specifiers

IMO Resolution MSC 61 (67) 1996; Annex 1, Part 2. Smoke & Toxicity Test. WF Report Number: Date: 13 th August Test Sponsor:

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

REPORT NUMBER: SAT-001B ORIGINAL ISSUE DATE: February 29, 2016 REVISED DATE:

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

European Technical Assessment

BS 476: Part 3: External Fire Exposure Roof Test. WF Report Number: Date: 28 th April Test Sponsor: Tapco Europe Limited

Council of the European Union Brussels, 21 March 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union

Test report. NanoPhos coating system EPR and EEN. Name of client: NanoPhos SA. Date: Pages: 5 Encl.: 1 Ref: BP / KTO

DECLARATION OF PERFORMANCE

~~oeti. Report VN71 O Classification Report. Reference

Europacable FAQ on CPR Status: 26/01/17

Introduction. Declaration of performance (DoP) CE marking

Forbo Flooring Attn. Mr. A. Tijhof Postbus AA Krommenie. Report. Sponsor : Contractor, manufacturer : Forbo Flooring. Lot. No. : 66869/3877.

DECLARATION OF PERFORMANCE

EUROPEAN TECHNICAL ASSESSMENT

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

Transcription:

Additional reaction to fire classification report. 12700H Owner of the additional classification report Antalis International 8 Rue de Seine 92517 Boulogne Billancourt Cedex France Introduction This additional classification report defines the classification assigned to the product Coala Walldesign P in accordance with the procedures given in the standard EN 13501-1:2007: Fire classification of construction products and building elements - Part 1: classification using data from reaction to fire tests. This additional classification report consists of 6 pages This report is additional to that issued as no. 12700F, dated 25/04/2007. This report is drafted in accordance with the regulations of EGOLF Agreement EGA 08rev:2012 Application note: clause 5.10 / 4-2 Amendment of reports: client changing product/company names (ii) for commercial reasons Issue of additional reports. The original report remains valid and is not replaced by this report. The product has not been retested and this report does not involve technical changes or technical reviews of the original report. The original and the new name of the product and of the company commercially responsible for the product are documented by the laboratory and maintained in the laboratory records. FOUNDING MEMBER WFRGENT nv - Ottergemsesteenweg-Zuid 711 - B-9000 Gent - België t: +32 9 243 77 50 - f: +32 9 243 77 51 - e: info@wfrgent.com BTW/VAT/TVA: BE0870.418.414 - Ondernemingsnummer: RPR GENT 0870.418.414 NOTIFICATIE BPV-RPC 1173 196-TEST WFRGENT nv is een spin-offbedrijf van de Universiteit Gent, voorheen Laboratorium voor Aanwending der Brandstoffen en Warmteoverdracht - Afdeling Brandveiligheid WFRGENT nv is a spin-off company from the University of Ghent, previously the Laboratory for Heat Transfer and Fuel Technology - Fire Safety Division

Additional classification report. 12700H Page 2 of 6 1. DETAILS OF CLASSIFIED PRODUCT a) Nature and end use application The product "Coala Walldesign P" is defined as a decorative wall covering'. Its classification is valid for the following end use application(s): Used for attaching onto walls or ceilings, by means of an adhesive. b) Description of the tested product The product Coala Walldesign P consists of a vinyl based wall covering with a paper backing. The weight of the vinyl layer (PVC) is 210 g/m². The weight of the paper backing is 90 g/m². minal value Mass per unit area (g/m²) 300 Mounting: The product was glued onto a calcium silicate board (12,5 mm, 870 kg/m³) with BK10-PVA adhesive (200 g/m²). 2. TEST REPORTS AND TEST RESULTS IN SUPPORT OF THIS CLASSIFICATION a) Test reports Name of the laboratory Name of the sponsor Test report ref.. Test method WFRGENT nv Ghent, Belgium Known by the laboratory 9634, 12700D, 12700E EN 13823 (February 2002) WFRGENT nv Ghent, Belgium Known by the laboratory 12700A, 12700B, 12700C EN ISO 11925-2 (February 2002) WFRGENT nv Ghent, Belgium Known by the laboratory 12700G EXAP according to CEN/TS 15117 (August 2005)

Additional classification report. 12700H Page 3 of 6 b) Test results Test method EN ISO 11925-2 (*) (1) 30 s flame application: Parameter Surface exposure Fs 150 mm - front side Edge exposure - front side Fs 150 mm EN 13823 (2) FIGRA 0,2 MJ (W/s) FIGRA 0,4 MJ (W/s) EN ISO 11925-2 (*) (3) 30 s flame application: Surface exposure - front side LFS<edge THR600s (MJ) SMOGRA (m²/s²) TSP600s (m²) Flaming droplets/particles f < 10 s f > 10 s Fs 150 mm Edge exposure - front side Fs 150 mm EN 13823 (4) FIGRA 0,2 MJ (W/s) FIGRA 0,4 MJ (W/s) LFS<edge THR600s (MJ) SMOGRA (m²/s²) TSP600s (m²) Flaming droplets/particles f < 10 s f > 10 s Number of tests Continuous Mean 6 6 95 1,5 18 3 67 6 6 18 1,8 7 3 55 Results t applicable. (*) The material didn t melt nor pull away from the pilot burner. (1) Based on the results obtained in test report. 12700A. (2) Based on the results obtained in test report. 9634. (3) Based on the results obtained in test report. 12700B. (4) Based on the results obtained in test report. 12700D. Compliance Criteria for Class B-s2,d0 Continuous 120 7,5 180 200 120 7,5 180 200 Compliance

Additional classification report. 12700H Page 4 of 6 EN ISO 11925-2 (*) (5) 30 s flame application: Edge exposure - front side Fs 150 mm EN 13823 (6) FIGRA 0,2 MJ (W/s) FIGRA 0,4 MJ (W/s) 6 15 1,7 8 2 56 120 7,5 180 200 LFS<edge THR600s (MJ) SMOGRA (m²/s²) TSP600s (m²) Flaming droplets/particles f < 10 s f > 10 s t applicable. (*) The material didn t melt nor pull away from the pilot burner. (5) Based on the results obtained in test report. 12700C (6) Based on the results obtained in test report. 12700E 3. CLASSIFICATION AND DIRECT FIELD OF APPLICATION a) Reference and direct field of application This classification has been carried out in accordance with clause 10.6 of EN 13501-1: 2007 and pren 15102: 2004. b) Classification The product "Coala Walldesign P" in relation to its reaction to fire behavior is classified as: Fire behavior Smoke production Flaming droplets B s2 d0 c) Field of application This classification for the product as described in 1b, is valid for the following end use conditions: Glued on any backing with a fire performance of A2 or better with a density of equal to or greater than 870 kg/m³ and a thickness of equal to or greater than 11 mm. Without a void Fixing: glued with BK10-PVA adhesive (200 g/m²) With joints

Additional classification report. 12700H Page 5 of 6 This classification is valid for the following product : minal mass per unit area:: 300 g/m² All colours 4. RESTRICTIONS At the time the standard EN 13501-1 (2007) was published, no decision was made concerning the duration of validity of a classification report. 5. WARNING This classification report does not represent type approval nor certification of the product. a) Concerning Declaration of Performance (DoP) according to CPR The classification assigned to the product in this report is appropriate to a Declaration of Performance (DoP) of the essential characteristics of the construction product by the manufacturer within the context of a System 3 Assessment and Verification of Constancy of Performance (AVCP). Under the Construction Products Regulation (CPR: EU 305/2011), such a Declaration of Performance (DoP) is a requirement for affixing the CE marking. The manufacturer has made a declaration, which is held on file. This confirms that the product's design requires no specific processes, procedures or stages (e.g. no addition of flame-retardants, limitation of organic content, or addition of fìllers) that are aimed at enhancing the fire performance in order to obtain the classification achieved. As a consequence the manufacturer has concluded that a System 3 Assessment and Verification of Constancy of Performance (AVCP) is appropriate. The test laboratory has played no part in sampling the product for the test, although it holds appropriate references, supplied by the manufacturer, to provide evidence for the traceability of the samples tested. b) Concerning Declaration of Conformity according to CPD (following EN 13501-1:2007) According to EN 13501-1:2007: Annex B - Reaction to fire classification report 5 Limitations :

Additional classification report. 12700H Page 6 of 6 The classification assigned to the product in this report is appropriate to a Declaration of Conformity by the manufacturer within the context of a System 3 Attestation of Conformity and CE marking under the Construction Products Directive. The manufacturer has made a declaration, which is held on file. This confirms that the product s design requires no specific processes, procedures or stages (e.g. no addition of flame-retardants, limitation of organic content, or addition of fillers) that are aimed at enhancing the fire performance in order to obtain the classification achieved. As a consequence the manufacturer has concluded that system 3 attestation is appropriate. The test laboratory has, therefore, played no part in sampling the product for the test, although it holds appropriate references, supplied by the manufacturer, to provide for traceability of the samples tested. PREPARED BY APPROVED BY Signature 1 Signature 2 This document is the original version of this additional classification report and is written in English. This report may be used only literally and completely for publications. - For publications of certain texts, in which this report is mentioned, our permission must be obtained in advance. The authenticity of the electronic signatures is assured by Belgium Root CA.