문서번호 Prepared Reviewed Approved QAEEF02110122PKASM P/N 42T4946, 42T4956 김홍일안경봉남익현남대호최운기정준용 UN Test Report ASM P/N 42T4946, ASM P/N 42T4956 (Nom. 32Wh, 11.1V) 목차 1. UN Transportation Regulation Test 2. Test Procedure 3. Test 4. Sample Image 2011. 01. 22
1. UN Transportation Regulation Test Test Test 1. Altitude Simulation Test 2. Thermal Test Test 3. Vibration Test 4. Shock Test 5. External Short Circuit Test 6. Impact Condition Storing at (low pressure)11.6kpa for 6hr at 20+/5 [5± 2,6hr 40±2,6hr,interval max. 30min] x 10cycle Storing at 20± 5 for 24h [Hz 200Hz Hz, in 15min] x 12 times x 3 direction 1) sinusoidal waveform with a logarithmic sweep 2) Hz 18Hz (maintaining 1gn) app. 50Hz (until 8gn) 200Hz (maintaining 8gn), 1.6mm total excursion Half sine shock (peak acceleration : 150gn, pulse duration : 6msec) x 6 (± x, y, z) direction x 3 cycle 100mΩ ext. shortcircuit at 55± 2 1hr continue after returning at 55± 2 Φ=15.8mm bar, 9.1kg mass, 61± 2.5cm height s Measuring mass before/ after each test (If M>5g, less than 0.1%) Measuring voltage before/ after each test (more than 90%) No leakage, no venting, no disassembly, no rupture, no fire No disassembly, no rupture, no fire (after 6 hours) Temp. monitoring (max. 10 ) Test. Over Current = Manufacturer s recommended max. continuous current X 2 Voltage 1.If voltage 18V, V (min.) = 2 x (max. voltage) or V (min.) = 22V. 2.If voltage > 18V, V (min.) = 1.2 x (max. voltage) No disassembly, no fire (after days) Test 8. Forced Only for Cell, not battery. No disassembly, no fire (after days) * Tests through T1T5 shall be conducted in sequence with the same battery. * We declare that the abovementioned test is the result of being checked according to UN Test ( Manual of Test and Criteria ST/SG/AC.10/2/Add.2) QAEEF02110122PKASM P/N 42T4946, 42T4956 [UN] Test Report (DMNote 3cell, C2) 1 / 6
2. Test Procedure Sample Sample Preparation Preparation Forced dis test is required to cell level, not pack battery level. Test 1 Test 1 Altitude Altitude Simulation Simulation Test 2 Test 2 Thermal Test Thermal Test Test 3 Test 3 Vibration Vibration Test 4 Test 4 Shock Shock Test 5 Test 5 Ext. Ext. Short Short Circuit Circuit 4 ea 1 st cycle d 4 ea 1 st cycle d 4 ea 50 th cycle d 4 ea 50 th cycle d 10ea 1 st cycle 50% d 10ea 50 th cycle d For cylindrical cells, 5 test cells are required. Test 6 Test 6 Impact Impact Test Test Over Over 4 ea 1 st cycle d 4 ea 50 th cycle d Test 8 Forced * 10ea 1 st cycle d 10ea 50 th cycle d Report Report QAEEF02110122PKASM P/N 42T4946, 42T4956 [UN] Test Report (DMNote 3cell, C2) 2 / 6
31. T1T4 Test Before Altitude (T1) Thermal (T2) Vibration (T3) Shock (T4) Residual (%) Loss(%) Residual (%) Loss(%) Residual (%) Loss(%) Residual (%) Loss(%) A. 1st cycle fully state 1 12.001 11.993 11.986 11.980 11.93 2 12.049 12.042 12.034 12.02 12.019 3 12.049 184.51 12.043 12.03 12.032 99.96 12.026 4 12.041 12.033 12.025 12.018 12.011 12.035 12.028 12.021 12.014 12.00 5 10.134 185.30 6 8 10.13 10.110 10.09 184.52 186.08 184.30 184.51 186.08 184.30 184.51 184.29 184.29 184.29 10.120 185.05 185.05 185.04 185.04 185.03 B. 50th cycle fully state 9 12.081 12.06 99.96 12.069 12.061 186.53 12.053 186.53 10 12.065 12.058 12.050 12.041 12.033 185.26 11 12.012 12.006 11.99 11.990 11.983 184.48 12 12.098 12.090 12.084 12.08 186.05 12.02 186.05 12.064 12.058 12.050 12.043 185.58 12.035 185.58 13 10.084 185.26 185.26 185.25 185.25 14 15 16 10.118 10.089 10.086 184.26 184.25 186.05 184.25 184.48 186.04 184.24 184.48 186.04 184.24 10.094 185.02 185.01 185.01 185.00 185.00 Measuring mass before/after each test (If M>5g, less than 0.1%) Measuring voltage before/after each test (more than 90%, only d samples) No leakage, no venting, no disassembly, no rupture, no fire QAEEF02110122PKASM P/N 42T4946, 42T4956 [UN] Test Report (DMNote 3cell, C2) 3 / 6
32. T5/T Test A. 1st cycle fully state 1 2 3 4 5 6 8 EXT.Short Circuit (T5) 11.93 12.019 12.026 12.011 12.026 9.99 9.4 9.49 9.86 9.86 55.96 55.90 55.29 55.4 55.96 54.88 55.22 55.95 54.11 55.95 B. 50th cycle fully state 9 10 11 12 13 14 15 16 EXT.Short Circuit (T5) 12.053 12.033 11.983 12.02 12.02 9.981 9.861 9.812 9.96 55.9 56.08 55.29 54.98 56.08 54.2 55.30 55.09 55.23 55.30 100mΩ ext. shortcircuit at 55±2 Test Condition Temperature < 10 No disassembly, no rupture, no fire within 6 hours A. 1st cycle fully state 1 18 19 20 Over (T) 11.94 11.45 11.40 11.333 11.94 25.16 25.29 25.0 24.98 25.29 B. 50th cycle fully state 21 22 23 24 Over (T) 11.39 11.860 11.408 11.394 11.860 25.30 25.23 24.88 25.22 25.30 Max. Current : 2000 ma CC/CV 2Imax(4000mA) 22V cutoff 24Hr Test Condition No disassembly, no fire within day QAEEF02110122PKASM P/N 42T4946, 42T4956 [UN] Test Report (DMNote 3cell, C2) 4 / 6
33. T6 Test (ICR18650C2) Impact (T6) A. 1st cycle 50% state 21 3.80 25.43 22 3.80 108.50 23 3.806 24.36 24 3.806 24.9 25 3.806 114.39 3.80 114.39 B. 50th cycle fully dis state 26 3.351 24.83 2 3.362 46.43 28 3.38 49.26 29 3.369 49.90 30 3.353 4.55 3.38 49.90 Test Condition Φ=15.8mm bar, 9.1kg mass, 61±2.5cm height Temperature < 10 No disassembly, no rupture, no fire within 6 hours QAEEF02110122PKASM P/N 42T4946, 42T4956 [UN] Test Report (DMNote 3cell, C2) 5 / 6
4. Sample Image QAEEF02110122PKASM P/N 42T4946, 42T4956 [UN] Test Report (DMNote 3cell, C2) 6 / 6