EN l L-Tron Washer/Extractor L-Tron Washer/Extractor The Large Capacity Washer Extractor for both automated and stand-alone systems
The powerful, versatile single motor drive system L-Tron Auto Pro 450 lb washer extractor 2 The Jensen L-Tron AutoPro takes hands off laundry processes to the next level; with the patented hopper design, the L-Tron AutoPro enables the machine to receive loads with the hopper in the closed, and ready to run position. This greatly reduces load time, as there is no L-Tron Open Pocket Washer Extractors for both automated and stand-alone washrooms Available with Auto-Pro loading hopper or standard door with observation glass window waiting for a loading chute to swing out of the way, and the main washer door to close. In addition, as the load is received through the hopper, water and chemicals are added to the first bath during the load operation also decreasing cycle times. This time savings is realized with every wash cycle! The hopper design also eliminates the need for tilting the machine back to receive the load. This again greatly reduces the load time. It also significantly reduces the space required for the machine and makes it much safer to operate as well as much less wear on parts due to less movement.
L-Tron OP 800 shown with optional Load Assist 2-way hydraulic tilt - 25 loading and 21 unloading Air bag suspension Machine mounted water and steam valves Manual supply pocket 3 The rugged frame construction of the L-Tron allows the machine to be built on risers that give it additional height to mate up with existing conveyors, shuttles and rail systems potentially eliminating much of the work needed for plant upgrades into existing systems. Also having the machine on risers greatly eases the task of unloading onto a belt conveyor or shuttle. With no clutches, jackshafts or shock absor bers, the L-Tron is possibly one of the simplest machines to maintain. The reductions in maintenance, loading, and formula run time that JENSEN USA has designed into the JENSEN L-Tron will simply add to your bottom line. Just one more way you save with JENSEN L-Tron. As a safety feature we also provide brackets and braces which should be used when performing maintenance on the L-Tron. This design eliminates unwanted tilting or closing of the door while the washer is being maintained. L-Tron Controls The L-Tron Control System uses an industrial PLC that is linked to a color touch screen for clear visualization and user friendly control. This system has 100 wash programs and provides complete control of the following: Water levels Chemical dosages Temperature control Cylinder movements and wash/extract speeds Loading and unloading programs For washroom applications with multiple machines, the L-Tron Compound Control manages the operation of the Shuttle Conveyor and the loading and unloading sequence of all washing and drying machines. This system also enables machine control functions to be performed centrally and provides a central interface with the chemical dosing system. The L-Tron Control System has the following standard features. Ratio Washing This feature uses the batch weight received from the loading system to determine the water level and chemical dosage. This system reduces water and chemical consumption, optimizes wash performance and prolongs the life of the linen. Intelligent Balancing System This patented system assures consistent and accurate distribution of the load prior to extraction, thus eliminating unnecessary
Main Washer Overview Manual Operation Main Washfloor Overview Controls can be pedastal mounted for remote installation or machine mounted Washfloor History 4 re-tries. This system reduces wear and tear on the machine and increases machine output. Maintenance Watch og The L-Tron is self-diagnosing with programmable watch dogs that monitor mechanical and electrical functions while washing. Automatic maintenance scheduling is achieved with a built in Hour meter and programmable service scheduler. Remote Access This feature enables JENSEN programmers to monitor the operation of the wash floor from their office at JENSEN USA Inc. This system provides valuable diagnostic support to the plant engineers and enables some software updates to be uploaded remotely.
L-Tron AutoPro AP-H 450 Top View Side View (Machine in unload position) Side View (Machine in load and run position) W W W Electrical cabinet Electrical cabinet H H H UH UH UH L-Tron Open Pocket OP-H 450 Top View W Side View Electrical cabinet Electrical connection 3 x 480 V, 60 Hz 60 A, 50/55 HP 1750/1200 RPM Fuse 80 A Air pressure 75 85 psi Air consumption 991 l/min or 35 cfm N 3/8 Steam pressure 100 125 psi UW UW Water pressure 30 85 psi 5 L-TRON Model 450 OPT/H 450AP 800 OPT/H 800 AP Product codes PC 406 PC 437 PC 415 PC 426 Cylinder size inches (mm) 66 x 40 66 x 40 76 x 44 76 x 44 Cylinder volume cu.ft. (cu.liters) 79(2237) 79 (2237) 115.5 (3270) 115.5 (3270) Working capacity pounds* 300 500 300 500 400 1000 400 1000 iameter cylinder opening in.(mm) 41 (1041) 41 (1041) 49 (1245) 49 (1245) Height cylinder opening load 42 (1067) 42 (1067) 41.5 (1054) 41.5 (1054) Height cylinder opening unload 34.5 (876) 34.5 (876) 35 (889) 35 (889) G force 300 300 300 300 Motor hp (kw) 50 (37) 50 (37) 55 (41) 55 (41) Water inlet valve in.(mm) 2 (50) 2 (50) 3 (80) 3 (80) rain valve in.(mm) 8 (203) 8 (203) 8 (203) 8 (203) Steam valve in.(mm) 1.25 (32) 1.25 (32) 1.25 (32) 1.25 (32) Width in.(mm) 104.25 (2648) 104.25 (2648) 116 (2946) 116 (2946) Lead/unload Width in.(mm) 141 (3582) 160 (4064) epth in.(mm) 102.5 (2604) 158.5 (4026) 125.5 (3188) 162.5 (4128) Height in.(mm) 103 (2616) 124 (3150) 111.75 (2839) 119 (3023) Unload Height in.(mm) 117 (2972) 132 (3353) 137 (3480) 137 (3480) Weight lbs.(kg) 18,000 (8165) 19,500 (8845) 23,000 (10,455) 24,500 (11,136) * Rated capacities are based on solied weight and may vary by classification of goods. ** Add appropriate dimension to height if optional risers are used
Typical arrangement of L-Tron Auto-Pro 450 lb open pocket washer extractors 6 Installation JENSEN is pleased to assist you in planning your laundry providing excellent consulting, layouts and technical data. Authorized JENSEN distributors or JENSEN engineers should carry out the installation to ensure the correct performance. Call us JENSEN provides a complete range of heavy- duty equipment for the laundry industry, delivered and installed according to your specifications. Please do not hesitate to contact us for further advice and information, or visit www.jensen-group.com Service In addition, JENSEN provides an extraordinary after sales service through a worldwide network of highly qualified Sales and Service Centers and distributors, all with their own maintenance and spare parts services. Local contact: JENSEN USA, INC. 99 Aberdeen Loop Panama City, FL 32405 T (850) 271-5959 F (850) 271-5901 E info-us@jensen-group.com Explore our equipment on www.youtube.com/jensengroupcom L-Tron-USLetter-150330_Frontal-2