Specialists in communications for the elevator industry

Specialists in communications for the elevator industry CATALOGUE 2017-2018 MERak - 1

Index of Contents MERak: Safety first MERak R&D MERak devices and EN 81-28 standard EMERGENCY TELEPHONES MEP2L Land Line Emergency Phone MMK-656 Emergency Compact Telephone MMK-656CE Emergency Compact Telephone Flush Mounted MEP-GW & AUDIO Digital Emergency Telephone & Audio Module GSM GATEWAYS MMk-737 GSM/M2M Gateway for Lifts / Intercom System MMk-736F GSM/M2M Gateway for Lifts MMk-736N GSM/M2M Gateway for Lifts SOFTWARE Lift Monitor Merak Cloud Platform KITS MMk-996 Kit for Lifts with Compact Emergency Telephone MMk-956 Component Box Kit for Lifts MMk-902 Enlightened Alarm Pushbutton For Under the Cabin ACCESSORIES Audio Modules Handsets Filters Batteries Cables Chargers and Power supply GENERAL INFORMATION MERak Products Warranty Contact and Social Networks 3 4 5 6 7 9 11 13 14 15 17 19 21 22 24 25 26 27 28 29 34 35 36 38 40 42 43 44 MERak - 2

MERak: Safety first MERak is a company specialized in emergency communications with strong presence in the elevator industry. It was founded in 1996 starting with two complementary line products: emergency devices and operating software. Nowadays the company has proven a solvent trajectory designing, producing and commercializing telecommunication devices that fulfill the European standard EN 81-28, which is essential in order to guaranty secure communication in lifts. Since 2005, MERak has its own R&D department responsible for boosting the development of its own projects and upgrading the commercialized range of products and services. And also has developed the concept of online elevator through the incorporation of M2M technology into its devices. MERak - 3

MERak R&D MERak s electronic and telecommunications engineering department (R&D) has specialized in developing solutions that fulfills the international legislation and the needs of its clients, in an ongoing process of technological improvement. The mastery of telecommunication and IT, fields evolving continually, has allowed MERak to produce innovative and completely adapted products to the needs of the vertical transport industry. Such as: web platforms for programming and test systems for remote emergency devices. The accumulated experience in this field allows MERak to apply the monitoring systems technology to new activities and devices. MERak - 4

MERak devices and EN 81-28 standard ALARMS GENERATION EN 81-28 stipulates that elevators must have an alarm system that allows two-way communication between trapped users in the elevator and rescue service. With MERak devices for elevators, users and operators can make emergency calls in case of entrapment to different telephone pre-programmed numbers depending on which button is pushed, the cabin alarm button or the maintenance alarm button (SOS). END OF ALARM EN 81-28 also requires that when an alarm occurs, the emergency telephone must remain in a special state ("waiting for the end of alarm") until trapped people have been rescued and installation maintainer through an authorized person confirms to the emergency telephone the finalization of the alarm situation. Once the alarm is ended, the telephone must go back to idle state and end the alarm in the reception call center through one of the following methods, 1). Through the maintenance alarm button of connected to the telephone, 2) through a command using the handset or external call, or 3) through an end of alarm button connected to an audio module. CABIN INFORMATION MERak emergency communication devices (compact telephone, audio modules) feature bright yellow and green LEDs to indicate the status of an emergency call through different patterns of selectable blinkings (EN 81-28). ALARM FILTERING The European standard EN 81-28 states that the emergency telephone should be capable, in the event that the control system detects that the car is not capable of trapping persons (for instance, at ground level with the doors open), the car alarm should be disabled so as to avoid false alarms due to vandalism. For this case, the emergency telephone MMk-656 has an input at the pair of terminals J1 FILTR and J1 FILTR. When this input is shortcircuited, generation of alarms from the car is disabled. BATTERY CONTROL The MMk-656 telephone manages the battery charge and performs measurement of the remaining charge in it. The device can generate automatic calls to the elevator maintenance company in case that the battery charge level is below a programmable tension threshold (as required by EN 81-28) or if no battery is detected. PERIODIC TEST CALL The European standard EN 81-28 demands that the set should make a status verification call at least every three days. To this end, the MMk-656 has been provided with two memory registers (06 and 07), where the numbers of the servers which log the test calls can be stored. MERak - 5

Emergency Telephones All that you need to comply with the EN 81-28 in one device MERak - 6

LAND LINE EMERGENCY PHONE MEP2L Compact emergency phone for lifts, includes battery inside, keyboard, digital design and works with any public land telephone line in the world. BENEFITS Designed to work with any public fixed telephone line in the world. Integrates keyboard in its upper part to facilitate the programming. Integrated battery to maintain the phone active in case of power outage. Suport Protocol P100 for programming all test call Works under 10 to 30V DC voltage and maintains the mechanical format of MMK-656, its predecessor. Protocol P100 Wide range of power supply: from 10 V to 30 V DC. Built-in lithium battery Built-in keyboard Great audio quality One language in the cabin and a second neutral setup language. Indicator LEDs of alarm progress, according to EN 81-28 Entirely digital integrated system improves audio, reliability and speech synthesis quality EN 81-28 l EN 81-70 MERak - 7

SPECIFICATIONS Complies with the EN 81-28 and EN 81-70. 5 Memory slots available to program emergency calls. Periodic test calls with customizable period (1, 2 or 3 days). Internal alarm calls (rescue operators). Two security passwords: PAC (Programming Access Code) that allows to program and check certain parameters and RAC (Remote- Maintenance Access Code) that allows you to program advanced parameters. 3 Programming modes: Remote programming through calling the Device from any telephone with DTMF dialing, local programming with integrates keyboard and factory by demand. TECHNICAL DETAILS Voltage: 10-30 Vdc Consumption in standby: 70 ma at 12 Vdc Active power consumption: 300 ma max. a 12 Vdc Battery Charge: 1 A Dimensions (height x width x depth): 142 x 76 x 22 mm. Weight: 190 gr. MEASURES (MM) Voice Synthesizer. Languages: English and Spanish (Available to introduce new languages on demand). Tracking through electronic serial number. Built filters for electrical noise control. Status and multicolor status LEDs according to the EN81-28 standard. MERak - 8

EMERGENCY COMPACT TELEPHONE MMK-656 Emergency compact telephone easy to configure, with advanced audio features, and with capacity to remote lift maintenance. BENEFITS Save costs due to its integrated, compact design. Install telephones quickly: voice assisted configuration or autoconfiguration with SD card. Anticipate breakdowns accessing remotly the lift controller. Obtain the greatest versatility on the market in power supply, connection and updates. Guarantee users high quality communications with optimised audio. Wide range of power supply: from 10 V to 30 V DC. Integrated two step intelligent charger for lead battery. Built-in Floor Synthesizer. Multilingual: up to two languages in the cabin and a third technical setup language. Indicator LEDs of alarm progress. End of Alarm pushbutton and Alarm Filter. Intercom analog output. EN 81-28 MERak - 9

SPECIFICATIONS Complies with the EN 81-28 and EN 81-70. 5 Memory slots available to program emergency calls. Periodic test calls with customizable period up to 3 days. Internal alarm calls (rescue operators). Intercom with machine room. Two security passwords: PAC (Programming Access Code) that allows to program and check certain parameters and RAC (Remote- Maintenance Access Code) that allows you to program advanced parameters. Connect up to 4 lift cabins sharing the same telephone line without any extra wiring. TECHNICAL DETAILS Voltage: 10-30 Vdc Consumption in stand by: 70 ma a 12 Vdc Active power consumption: 300 ma max. a 12 Vdc Battery Charge: 1 A Dimensions (height x width x depth): 142 x 76 x 22 mm. Weight: 190 gr. MEASURES (MM) 3 Programming modes: Remote programming through calling the Device from any telephone with DTMF dialing, local programming through intercom (Handset MMk-616) and programming through preprogrammed micro SD memory card. Voice Synthesizer. Floor Announcer (Connectivity with lift controller through RS-485 port). Languages: English, Spanish, French, Italian, German, Portuguese, Catalan, (Available to introduce new languages). Programmable Automatic Battery Control. Toughness against overvoltage. Tracking through electronic serial number. Built filters for electrical noise control. Status and multicolor status LEDs according to the EN81-28 standard. MERak - 10

EMERGENCY COMPACT TELEPHONE FLUSH MOUNTED MMK-656 CE Emergency compact telephone easy to configure, with advanced audio Features, and with capacity to remote lift maintenance. Flush mounted on stainless steel faceplate with antivandalism protection. BENEFITS Save costs due to its integrated, compact design. Install telephones quickly: voice assisted configuration or autoconfiguration with SD card. Anticipate breakdowns accessing remotly the lift controller. Obtain the greatest versatility on the market in power supply, connection and updates. Guarantee users high quality communications with optimised audio. Wide range of power supply: from 10 V to 30 V DC. Integrated two step intelligent charger for lead battery. Built-in Floor Synthesizer. Multilingual: up to two languages in the cabin and a third technical setup language. Indicator LEDs of alarm progress. End of Alarm pushbutton and Alarm Filter. Intercom analog output. EN 81-28 MERak - 11

Complies with the EN 81-28 and EN 81-70. 5 Memory slots available to program emergency calls. Periodic test calls with customizable period up to 3 days. Internal alarm calls (rescue operators). Intercom with machine room. Two security passwords: PAC (Programming Access Code) that allows to program and check certain parameters and RAC (Remote- Maintenance Access Code) that allows you to program advanced parameters. Connect up to 4 lift cabins sharing the same telephone line without any extra wiring. TECHNICAL DETAILS Voltage: 10-30 Vdc Consumption in stand by: 70 ma a 12 Vdc Active power consumption: 300 ma max. a 12 Vdc Battery Charge: 1 A Dimensions (height x width x depth): 220 x 120 x 26 mm. Weight: 470 gr. MEASURES (MM) 3 Programming modes: Remote programming through calling the Device from any telephone with DTMF dialing, local programming through intercom (Handset MMk-616) and programming through preprogrammed micro SD memory card. Voice Synthesizer. Floor Announcer (Connectivity with lift controller through RS-485 port). Languages: English, Spanish, French, Italian, German, Portuguese, Catalan, (Available to introduce new languages). Programmable Automatic Battery Control. Toughness against overvoltage. Tracking through electronic serial number. Built filters for electrical noise control. Status and multicolor status LEDs according to the EN81-28 standard. Build in stainless steel faceplate with anti-vandalism protection. MERak - 12

DIGITAL EMERGENCY TELEPHONE & AUDIO MODULE MEP-GW & AUDIO GSM emergency telephone that provides M2M connection through communication ports and with state-of-the-art quality digital audio technology. BENEFITS Up to 4 audios powered through CAN BUS (no need for charger or battery in the cabin). Supports all GSM operators. Full duplex triphonie (simultaneous conversation from every audio unit) Local programming through analog telephone assisted by voice (MMk-616). Adjustable speaker power: adapt the volume to the acoustic contitions of the cabin. Power supply: 24V/1A. Quadband (GSM 850/900/1800/1900 MHz) and GPRS (2G network). Communications ports: RS232, CAN BUS, RS485 and 2 programmable general purpose pins. Remote management through IP/ GPRS. Multilanguage External GSM Antenna 900/1800 Mhz. Supports standard SIM card. EN 81-28 / EN 81-70 MERak - 13

GSM Gateways Total integration and compatibility MERak - 14

GSM/M2M GATEWAY FOR LIFTS / INTERCOM SYSTEM MMk-737 GSM/M2M Gateway designed for the lift industry with entirely digital internal system. Supplies mobile phone line to emergency phones and provides connection to the lift controller to remote monitoring. BENEFITS Designed in order to offer an entirely digital internal system The full version offers RS232, 485 and CANBUS data connectivity Developed to work with MERak s CANBUS audio digital intercom system Power output for cabin device phone (12 24V) Disposes of two inputs allowing monitoring events and two outputs, including one indicating the lack of coverage Can be produced for 2G, 3G and 4G GSM networks and is compatible with the Merak LiftMonitor Cloud platform Remote management by IP / GPRS 2G, 3G and 4G connectivity Complies with ETSI standard ES 202 971 Power consumption: 65 ma minimum; 270 ma maximum. Communications ports: RS232, CAN BUS, RS485 and 2 in optocoupler and 2 outputs. Data gateway DTMF-IP. External GSM Antenna 900/1800 Mhz. Supports standard SIM card. Box content: GSM/M2M Gateway, external antenna, adaptor 12V/2A, quick setup guide. MEASURES (MM) Dimensions (height x width x depth): 210 x 90 x 27 mm Weight: 350 gr. EN 81-28 MERak - 15

SPECIFICATIONS Power: Internal rechargeable lithium-ion battery Internal security battery Voltage: 12 Vdc ±20% / 2A Consumption in standby: 100 ma Active power consumption: 230 ma (max) Consumption charging the battery: +200 ma Performance: Europe: Dualband; Other: Quadband (GSM 850/900/1800/1900 MHz) and GPRS IP data transmission for remote monitoring (M2M) Programming through SMS and Lift Monitor Alarm indicating low battery and network error Open to any mobile operator Compatible with standard SIM cards Call divert programmable telephone numbers Programmable notifications Selectable events notifications Operating temperatures: -10º+C to 55+C Safety: Safe Access Code Connectivity: RS232 Port / RS485 Port / CAN BUS CAN Bus: 2 (optional) 2 IN optocoupler and 2 OUTPUTS FXS port for telephone line and optional FXO port SMA antenna connector Power switch Box Contents: GSM-/M2M gateway MMk-737 External GSM antenna 900/1800 MHz 12V / 2A adaptor AC/DC DIN rail guides Quick Setup Guide Standards: FXS output according to standard ETSI ES 202 971. Harmonized specification of physical and electrical characteristics at a 2-wire analogue for short line interface. SMS notification of power failure Programmable alarm by SMS of repetitive calls Supports ETSI land line phones Status indicator LED Battery indicator LED Coverage level indicator LEDs Prepared for wall anchorage with external screws or DIN rail MERak - 16

GSM/M2M GATEWAY FOR LIFTS MMk-736F GSM/M2M Gateway designed for the lift industry that supplies mobile phone line to analog emergency phones and provides connection to the lift controller to remote monitoring. BENEFITS Compatible with any analog emergency phone for lifts using DTMF tones. Supports all GSM operators. Designed to fulfill with the EN 81-28 standard. Prepared for wall anchorage with external screws or DIN rail. Internal safety battery for power failure situations. Allows remote lift controller monitoring through standard data interfaces. Power supply: 12V/2A. Power consumption: 65 ma minimum; 270 ma maximum. Quadband (GSM 850/900/1800/1900 MHz) and GPRS. Communications ports: RS232, CAN BUS, RS485 and 2 general purpose pins. Remote management through IP/GPRS. Data gateway DTMF-CSD, DTMF-IP. External GSM Antenna 900/1800 Mhz. Supports standard SIM card. MEASURES (MM) Dimensions (height x width x depth): 210 x 90 x 27 mm Weight: 350 gr. EN 81-28 MERak - 17

SPECIFICATIONS Power: Internal rechargeable lithium-ion battery Internal security battery Voltage: 12 Vdc ±20% / 2A Consumption in stand by: 100 ma Active power consumption: 230 ma Consumption charging the battery:+200 ma Platform: Hardware: CIG005A3 Software: 1.0.3 or superior Remotely upgradeable firmware Performance: Quadband (GSM 850/900/1800/1900 MHz) and GPRS IP data transmission for remote monitoring (M2M) Programming through SMS Alarm indicating low battery and network error Automatic selection of the type of call (voice/data) Open to any mobile operator Compatible with standard SIM cards Call forwarding programmable telephone numbers Programmable activation notifications SMS notification of power failure Programmable alarm by SMS of overflow calls Supports every analog line telephone Status indicator LED Battery indicator LED Coverage level indicator LEDs Prepared for wall anchorage with external screws or DIN rail Operating temperatures: -10ºC to 55ºC Safety: Safe Access Code Connectivity: RS232 Port / RS485 Port CAN Bus: 2 (optional) GPOS: 2 pins FXS port for telephone line: 2 connectors SMA antenna connector Power switch Supports telephones connected in parallel: Up to 4 Box Contents: GSM-M2M gateway MMk-736F External GSM antenna 900/1800 MHz 12V / 2A wall-mounted power supply DIN rail guides Quick Setup Guide Standards: ETSI ES 202 971 Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics at a 2-wire analogue for short line interface. Controls repetitive calls MERak - 18

GSM/M2M GATEWAY FOR LIFTS MMk-736N GSM/M2M Gateway designed for the lift industry that supplies mobile phone line to analog emergency phones. BENEFITS Compatible with any analog emergency phone for lifts using DTMF tones. Supports all GSM operators. Designed to fulfill with the EN 81-28 standard. Prepared for wall anchorage with external screws or DIN rail. Internal safety battery for power failure situations. Power supply: 12V/2A. Power consumption: 65 ma minimum; 270 ma maximum Quadband (GSM 850/900/1800/1900 MHz) and GPRS. Remote management through IP/GPRS Data gateway DTMF-CSD, DTMF-IP. External GSM Antenna 900/1800 Mhz. Supports standard SIM card. MEASURES (MM) Dimensions (height x width x depth): 210 x 90 x 27 mm Weight: 350 gr. EN 81-28 MERak - 19

SPECIFICATIONS Power: Internal rechargeable lithium-ion battery Internal security battery Voltage: 12 Vdc ±20% / 2A Consumption in stand by: 100 ma Active power consumption: 230 ma Consumption charging the battery:+200 ma Platform: Hardware: CIG005A3 Software: 1.0.3 or superior Remotely upgradeable firmware Performance: Quadband (GSM 850/900/1800/1900 MHz) and GPRS IP data transmission for remote monitoring (M2M) Programming through SMS Alarm indicating low battery and network error Automatic selection of the type of call (voice/data) Open to any mobile operator Compatible with standard SIM cards Call forwarding programmable telephone numbers Programmable activation notifications SMS notification of power failure Status indicator LED Battery indicator LED Coverage level indicator LEDs Prepared for wall anchorage with external screws or DIN rail Operating temperatures: -10ºC to 55ºC Safety: Safe Access Code Connectivity: GPOS: 2 pins FXS port for telephone line: 2 connectors SMA antenna connector Power switch Supports telephones connected in parallel: Up to 4 Box Contents: GSM-M2M gateway MMk-736N External GSM antenna 900/1800 MHz 12V / 2A wall-mounted power supply DIN rail guides Quick Setup Guide Standards: ETSI ES 202 971 Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics at a 2-wire analogue for short line interface. Programmable alarm by SMS of overflow calls Supports every analog line telephone Controls repetitive calls MERak - 20

Software All that you need to comply with the EN 81-28 in one device MERak - 21

MERAK CLOUD PLATFORM Lift monitor The Merak Emergency Devices Management Service allows for the control and programming of every Merak Emergency Landline Phone or GSM Gateway installed on your fleet of elevators remotely from any Internet connected computer or smart device. It s a comprehensive solution which ensures a better service from end to end. BENEFITS Permanent control (24 x 7 x 365) Telephone test management Device programming Warning alerts Device and telephone line renting Accessible from PC, tablet and smartphones Three different levels of service MERak - 22

Remote telephone programming Modify the operation parameters of your MERak emergency telephones Remote GSM Gateway programming Set up call forwardings, notifications of events and other functions of the MERak GSM gateways Basic information of your devices Centralize data on location, status and identifiers of the entire fleet of installed MERak devices Acces to Plug&Play service Activate your MERak Lift Monitor account and program your personal settings on emergency telephones and GSM gateways: by just pressing a button! Data input through templates You can register new devices using your own programmed templates Telephone test management Receiving and controlling periodic simulated emergency calls according to the EN 81-28 standard Monitoring battery status Check the charge level of the MERak devices batteries Emergency call alert Get email alerts in case of an emergency call in installations with a MERak gateway MERak - 23

Kits Easy and fast installation, work comfortably with the content MERak - 24

COMPONENT BOX KIT FOR LIFTS WITH COMPACT EMERGENCY TELEPHONE MMk-996 Box that includes kit for emergency situations and compact emergency tele-phone. Prepared to be installed on top of the cabin and to be complemented with an analog Audio Module. BENEFITS Compatible with all analog Audio Module of MERak. Easy and fast installation. Wide box that allows to work comfortably with the content. Safe way to carry and keep all components. Enlightened pushbutton to activate alarm in entrapment situations. MEASURES (MM) Compact Emergency Telephone MMk-656 Lead Acid Battery Charger Lead Acid Battery Enlightened Alarm Pushbutton 3m cable with RJ-45 terminals for MERak analog Audio Modules EN 81-28 MERak - 25

COMPONENT BOX KIT FOR LIFTS MMk-956 Box that includes kit for emergency situations. Prepared to be installed on top of the cabin and to be complemented with an analog Compact Emergency Telephone. BENEFITS Compatible with all analog Audio Module of MERak. Easy and fast installation. Wide box that allows to work comfortably with the content. Safe way to carry and keep all components. Enlightened pushbutton to activate alarm in entrapment situations. MEASURES (MM) Lead Acid Battery Charger Lead Acid Battery Enlightened Alarm Pushbutton 3m cable with terminals to connect to Compact Emergency Telephones EN 81-28 MERak - 26

ENLIGHTENED ALARM PUSHBUTTON FOR UNDER THE CABIN MMk-902 Box with built-in Alarm Pushbutton for emergency situations under the cabin. MEASURES (MM) BENEFITS Compatible with all analog Compact Emergency Telephone of MERak. Provides a calling point under the cabin. Easy and fast installation. Enlightened to facilitate its location in an emergency situation. Enlightened Pushbutton 4m cable with terminals to connect to compact Emergency Telephones MERak - 27

Accessories Customizable and efficient Accessories MERak - 28

AUDIO EXPANSION MODULE MMk-699 Expansion module for assembling lift buttons with incorporated audio and connectors for loudspeaker, microphone, pushbuttons and external LEDs. BENEFITS Reduced size: it adapts easily to your needs Full panel of connectors to attach loudspeaker, pushbuttons, microphone and external LEDs Optimal quality sounds due to a high sensitivity integrated microphone Secure two-way communications with the alarm receiving centre Complies with the EN 81-70 standard: High brightness LED indicators MEASURES (MM) Designed for maximum customization of the installation: Fits various cabin settings. Full connector panel that allows plug in wires of variable length to the speaker, the pushbuttons and the external LEDs. Can be cascaded with other audio modules. Full-duplex communication with the alarm receiving center. High brightness LEDs yellow and green that indicate the status of the emergency call by different selectable patterns of flashes (EN 81-28). EN 81-28 / EN 81-70 MERak - 29

ANALOG AUDIO MODULE FLUSH MOUNTED MMk-698C Analog audio module for cabin, flush mounted with anti-vandal protection and yellow and green LEDs that indicate the status of emergency calls. BENEFITS Adjustable speaker power: adapt the volume to the acoustic conditions of the cabin. High quality sound due to its integrated highly sensitive microphone. Secure bidirectional communications with the alarm receiving center. Equipped with an effective anti-vandal protection. Compatible with all analog emergency telephones of MERak. MEASURES (MM) Size adapted to fit behind the cabin operator panel. Complies with the requirements of the EN 81-70 referring to the visible and audible signals. Bult-in bright yellow and green LEDs in accordance with the EN 81-70 standard. Connection for optional external microphone EN 81-28 / EN 81-70 MERak - 30

ANALOG AUDIO MODULE 143 X 70 X 40 MM MMk-698 Audio for cabin operator panel, mounted on a galvanized plate with anti-vandal protection and yellow and green LEDs that indicate the status of emergency calls in accordance with the standard EN 81-70. BENEFITS Adjustable speaker power: adapt the volume to the acoustic conditions of the cabin. High quality sound due to its integrated highly sensitive microphone. Secure bidirectional communications with the alarm receiving center. Equipped with an effective anti-vandal protection. Compatible with all analog emergency telephones of MERak. MEASURES (MM) Size adapted to fit behind the cabin operator panel. Complies with the requirements of the EN 81-70 referring to the visible and audible signals. Bult-in bright yellow and green LEDs in accordance with the EN 81-70 standard. Connection for optional external microphone. EN 81-28 / EN 81-70 MERak - 31

ANALOG AUDIO MODULE 120 X 90 X 30 MM MMk-694 Audio for cabin operator panel, mounted on a galvanized plate with anti-vandal protection and yellow and green LEDs that indicate the status of emergency calls. BENEFITS Adjustable speaker power: adapt the volume to the acoustic conditions of the cabin. High quality sound due to its integrated highly sensitive microphone. Secure bidirectional communications with the alarm receiving center. Equipped with an effective anti-vandal protection. Compatible with all analog emergency telephones of MERak. MEASURES (MM) Size adapted to fit behind the cabin operator panel. Complies with the requirements of the EN 81-70 referring to the visible and audible signals. Bult-in bright yellow and green LEDs in accordance with the EN 81-70 standard. Connection for optional exteral microphone. EN 81-28 / EN 81-70 MERak - 32

STAINLESS STEEL FACEPLATE MMk-397 Stainless steel faceplate with anti-vandalism protection for fush mount MMk-694. BENEFITS Perforated for the placement of the speaker, the microphone, the optical signals and the alarm button of the emergency unit. Integrates the engraved and painted symbols and indications that are necessary to meet the standard EN 81-70 of requirements for disabled people. Guarantees the vandal-proof effect without adding intermediate parts, as required by the European standard EN 81-70. Perfectly adaptable to MERak telephone modules. Can integrate a backlit alarm button. MEASURES (MM) Stainless steel 18/8 (AISI-340) Weight: 170 g. Adaptable to analog audio module MMk-694 External dimensions (mm): 135 x 125 Faceplate dimensions (mm): 125 x 90 MERak - 33

HANDSET WITH KEYBOARD FOR LIFTS MMk-616 Analog telephone handset type to be installed in the machinery room. Designed to operate programming keyboard and as intercom for lift emergency telephones. BENEFITS Has a full set of keys to generate de full set of DTMF tones (1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *, #, A, B, C, D) and programming emergency telephones for lifts. Separate keyboard and earphone for a more comfortable use. Can be used as an intercom between machinery room and the emergency telephone in the lift car. Easy placement in wall or desktop positions. MEASURES (MM) Designed to be used as an intercom and for consult and programming lift emergency telephones settings. Can be used as a regular telephone for calling or test the operation of the telephone line. Complies with the 1999/5/CE policy (March 9, 1999). Adapted to the standards of electromagnetic compatibility and electrical safety (EN60950 : 2000; EN55022 : 1998; EN55024 : 1998). EN 81-28 MERak - 34

PROTECTION FILTER AGAINST OVERVOLTAGE IN TELEPHONE LINES MMk-617 Filter for telephone line that provides extra protection against storms and electric discharges to the devices connected to the telephone line including emergency telephones. BENEFITS Activates upon sensing an overvoltage on the telephone line and prevents the irreversible damage that can cause an electric discharge in the emergency telephones. Offers two levels of overvoltage protection: through exploders and through gas-lamp. Easy to install: wall placed in the telephone line, between the NTP and the lift. The connections to the telephone line and the grounding are done with screws. The filter must be grounded for the protection to be effective. MEASURES (MM) Nominal line voltage (Un) 150V. Maximum line voltage (Uc) 170 V. Minimum limiting voltage 190 V. MERak - 35

MMk-223 Power supply unit for emergency telephones MMk-656 Voltage: 12 Vdc Capacity: 2,5 Ah Weight: 0,95 Kg. MEASURES Dimensions (mm): 178 x 35 x 65 MMk-234 Power supply unit for emergency telephones MMk-656 Voltage: 12 Vdc Capacity: 3,4 Ah Weight: 1,32 Kg. MEASURES Dimensions (mm): 133 x 67 x 66 MERak - 36

MMk-208 Power supply unit for emergency telephones MMk-656 Voltage: 12Vdc Capacity: 0.8 Ah Weight: 0.36 Kg. JST SMP-02-BC male connector with 2 circuits MEASURES Dimensions (mm): 96 x 25 x 62 MMk-220 Li-Ion power supply unit for GSM Gateway Voltage: 3,7 Vdc Capacity: 2.2 Ah Weight: 48 g. MEASURES Dimensions (mm): 65.05 x 18.4 x 18.4 MERak - 37

MMk-622 Cables to connect the battery to the phone MMk-656 Two connection cables Two faston connectors Two male connectors for crimping Built-in 2A fuse 5x20 mm MEASURES 60 centimeters in length (each) MMk-630 Cable with RJ-45 terminals to connect MERak analog emergency telephones and audo modules. Cable RJ-45 CAT5e Two connectors RJ-45 MEASURES Longitude: 10 m. MERak - 38

MMk-633 Cable with RJ-45 terminals to connect MERak analog emergency telephones and audio modules. Cable RJ-45 CAT5e. Two connectors RJ-45 MEASURES Longitude: 3 m. MMk-635 Cable with RJ-45 terminals to connect MERak analog emergency telephones and audio modules. Cable RJ-45 CAT5e. Two connectors RJ-45 MEASURES Longitude: 50 cm. MERak - 39

MMk-107 Smart charger for 12V / 1A lead-acid batteries. BENEFITS Two load levels: It works with two levels of charge (one for the recovery of the batteries and another for the maintenance of the load) that ensure the maximum longevity of the batteries. Connection Terminals: It is equipped with the necessary terminals for the connection to both the emergency telephone and the battery. Input: 100-250Vac, 50 / 60Hz. Output: 12Vdc, 1.0A. MMk-108 Power supply unit of 12V/2A for GSM Gateways. BENEFITS Removable plug: can adapt to different types of wall sockets Approved for operation with MERak range of GSM Gateways MMK-736. Input: 100-240 v-50/60hz 0,55A. Output: 12 Vdc 2A Includes terminals to a lead battery the power charger integrated into the MMk-656 units. MERak - 40

MMk-120 Power supply unit for emergency phones MMk-656. BENEFITS Removable plug: can adapt to different types of wall sockets Approved for operation with MERak range of GSM Gateways MMK-736. Input: 100-240 v-50/60hz 0,55A. Output: 12 Vdc 2A MERak - 41

General Information Seriousness, technical capacity, specialized service and continuous improvement MERak - 42

MERak Products Warranty All the MERak accessories and units have been subjected to strict quality controls before manufacturing. In case of detecting any malfunctioning, we recommend to see the installation, connecting and programming instructions available in our web site. If the product presents any manufacturing fault, MERak undertakes to repair or replace within two years from the delivery date, in according to the current European regulation. Moreover, with the aim of improving constantly and in order to provide the best possible service to its clients, MERak repairs, updates and replaces certain products out of the guarantee period, if considered reasonable. The MERak warranty does not cover damages for the use or the improper connection of its units nor the damages caused by overvoltages and electric storms. MERak puts at the disposal of its clients all the necessary information for the installation, the connecting and the programming of its telephones, including the operating guides, handbooks, technical specifications, image galleries and support tools. To learn more about the terms and conditions of the MERak Products Warranty, visit our website www.merakeurope.com. MERak - 43

Contact Av. Sarrià 67 bis. 08029 Barcelona, Spain Phone: + 34 93 363 14 28 Email: info@merak.es Google +: Merak Connecting Lifts Linkedin: MERak SL www.merak.es www.merakeurope.com VISIT OUR WEBSITE MERak - 44