IföSign 6860 WC-Unit 6860 Assembly instructions I00127_NOV 16
A joint government and industry program Licence No. 0058 When tested in accordance with Standard AS/NZS 6400 For more information and to compare products, refer to: Ifo Sign Toilet - S Trap One-piece free standing toilet with seamless cistern lid for ease of cleaning enabled with Fresh WC hygienic dosing solution in the flush button. IFO6860 FEATURES Free standing WC Seamless cistern for added infection control WELS 4 star rated (4.5/3L Flush) Patented Fresh WC blue stick technology enabled for increased infection control Option to place WC at 45 degree angle in corner Cistern bolted onto pan for enhanced back support Increased foot print enhances stability Fully glazed on back and inside rim to avoid bacteria growth 100mm minimum set out to finished wall and no maximum (does not cut into alcove) CAD drawings available from website All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour and where exposed mounting holes are provided, 316 stainless steel screws are to be used Product Code IFO6860 IFO6860001010 IFO Sign Toilet - S Trap IFO Sign Toilet - S Trap, no screw holes OPTIONS Raised Flush Button IFO98308 Pressalit IFO Hard Seat - white IFO724D55999 Pressalit Sign Soft Close Seat - white IFO624000-DO39999 Pressalit Sign Hard Seat No Lid - white IFO553000-BD1999 Pressalit Sign Hard Seat - anthracite grey IFO554112-BD1999 Pressalit Sign Hard Seat - white IFO554000-BD1999 Fresh Sticks - 10 packets of 5 sticks IFO94568 Floor Anchor IFO98015 95 355 860 670 40 360-415 420 70 20 The more stars the more water efficient Ø102 100 100 Min.* 4.5 litres per full flush 3 litres per half flush 3.1 litres per average flush www.waterrating.gov.au AS 1172.1 WMKA21026 IAPMO R&T Certifikate Nr. 2004-SKM-AE-825 ISO 14001:2004 Certifikate Nr. 2004-SKM-AQ-2054 ISO 9001:2000 *For more details on the set out, refer to separate document Ifo WC Set Out TDS Version:Sep15 Call 1300 369 273 www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 4000 Fax: 02 8556 4055
Ifo Toilet - S Trap - WC Set Out 800 1428.1 set out in accordance with AS 1428.1 1:2009 165 Distance from finished wall to front of pan Distance from finished wall to back of pan 800mm 130mm 165 95 40 125 Distance from finished wall to centre of outlet 200mm Min 200 Finished wall Finished wall surface 50 70 Ø 100 DWV 45 Corner Set up with no arm support system 200 Finished Floor 280 Min. 280 Min. 775 Institutional/Health set out Set out typical for hospitals which allows for substantial air circulation and free coving Finished wall surface Distance from finished wall to front of pan 775mm 40 100 Distance from finished wall to back of pan Distance from finished wall to centre of outlet 100mm 170mm 45 Corner Set up with arm support system Min 170 Finished wall 170 50 70 Finished Floor Ø 100 DWV 700 Minimum set out The minimum to still allow air circulation behind the WC pan Distance from finished wall to front of pan 700mm 40 30 Distance from finished wall to back of pan Distance from finished wall to centre of outlet 30mm 100mm Min 100 Finished wall 100 50 70 Finished Floor Ø 100 DWV Version: Jan 16 Call 1300 369 273 www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 4000 Fax: 02 8556 4055
Thank you for choosing Ifö Sign. You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit. To guarantee correct and reliable installation of this product we urge you to follow the installation instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation. Ifö Sign 6860, 6861 You have chosen the optimum standard WC unit with built-in S-trap. It can usually be installed as quickly and easily, and in the same situations, as WC units with traditional open S-traps. Aavailable as an option: Waterproof Floor Mounting WC connections The water connection to the cistern inlet is a 1/2" BSP male. Looking from the front of the pan, it is located on the right hand side, on the bottom of cistern. See S-Trap WC Set Out previous page for connection dimensions and other dimensions on WC unit. Bonding/Siliconing This WC unit is suitable for bonding/siliconing, see images 11-15. The method applies to installation of WC units using elastic free surface. After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter to create a Also apply silicone sealant around the rear cover to create Ensure no gap is left that can let any moisture to get through inside the base of the pan. supplied blind cover plugs (IFO94752) must be used in the screw holes on the WC unit, and sealed with silicone. Do not use the WC before the silicone has cured. Dosing This WC is prepared for the Fresh WC function, with a screw, as illustrated in images 16-17. Depending on the content of the tablet, it produces a fresh blocks that are suspended from the rim of the bowl, by Ifo Fresh Sticks are available from Enware. Product code IFO94568-10 packets of 5 sticks. For toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm stability. Fixing the toilet pan with only the silicone seal is
Ifö Sign 6893, 6894 You get more free floor space with a wall-hung style WC unit. It facilitates easier cleaning of the bathroom floor. 30 Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model 6832. Flush button Ifo Sign WC units are supplied with: unit by turning it a quarter turn clockwise and then lifting 31 32 Flush volume - Polished chrome flush button (IFO98303) Optional: Raised Chrome Button (IFO98308) button, cut away the catch on the lever arm as shown in 33 Removal of Flush Button and cistern cover so that the rear catch is installed facing forwards Remove the flush button, cover mounting and cover as illustrated in images 16-22. Servicing Cistern Components If the WC unit runs - first check that the outlet valve's outlet seal washer is not damaged. If it is, replace the outlet washer (IFO96765), as illustrated in images 23-25. Then check that the inlet valve closes correctly. If it does not, replace the inlet valve (IFO96766) as illustrated in images 26-28. The lever arm to the inlet float is normally installed on the lower float setting for optimum water flow. This setting can handle a water pressre of 10 bars. In the event of the WC unit running at high water pressures, the lever arm can be moved to the upper setting and then handles a maximum water pressure of 12 bars. See image 29. Note: Inlet Water Pressure Max. 500 kpa (AS 3500.1) Reinstalling Reinstall in reverse order. The screws for the cistern mounting must be tightened alternately to a maximum torque of 2.5 Nm as illustrated in image 35. The cover screw must be tightened to a maximum torque of 1.0 Nm as illustrated in image 37. Maintenance advice and cleaning WC units, bidets and wash basins have a glazed surface. Glazed surfaces are easy to keep clean and are resistant against most chemicals. Clean regularly to prevent cleaning problems. Use normal cleaning agents. Clean regularly to prevent cleaning problems. However, use hot water and soap and wipe dry with a cloth. This is because cleaning agents for porcelain are not intended for chrome parts/plastics and can risk cracking This WC-unit is test approved according to NT VVS 120 If necessary See images 30-32. Cleaning utensils, which contain abrasive agents, such as wire wool and green scouring pads, must not be used. Strong acids, e.g. hydrochloric acid and sulphuric acid and strong alkalines, e.g. caustic soda should not be used. Dripping taps and running WC units must be repaired immediately. For repair or to purchase spare parts, contact your local plumbing contractor or plumbing centre. For more information, contact Enware. If the toilet is subject to freezing temperatures, the WC,. 24 23 0.3-0.4 litres of anti-freeze into the water trap and cover evaporation. 10
* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports, 11 12 GB / Make sure the surface of the tiles is clean, dry and free from grease. 13 14 After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter to create a strong bonding between the pan and the floor. Also apply silicone sealant around the rear cover to create a thorough seal between the rear cover, pan and floor. Ensure no gap is left that can let any moisture to get through inside the base of the pan. If the WC unit is bonded / siliconed to the floor, the supplied blind cover plugs (IFO94752) must be used in the screw holes on the WC unit, and sealed with silicone. Do not use the WC before the silicone has cured. 15
Access to Internal Components Dosing Setting Flush Volume Maintenance and Servicing 16 2 1 17 18 2
19 20 21 22 23 2 24 1 1 25 26 26
27 28 29 30 Max 12 bar Max 10 bar 2 liter 5 liter 31 32 2 3 liter 1 8 liter 27
33 34 35 Max 2,5 Nm 1 3 2 4 36 37 Max 1,0 Nm 28
Ifo - Toilet Sign Spare Parts IFO98303 Sign Dual Flush Button - Chrome 5 IFO90610 Cistern Cover White - Ceramic Shroud Only 11 IFO98308 Sign Raised Dual Flush Button - Chrome 7 IFO96760 Foam Seal Gasket - cistern / bowl 22 IFO96763 Cover Screw Rod 1 IFO91370 Water Flush Distributor / Spreader 23 IFO96766 Inlet Valve Assembly (Inlet valve body with locking clip, shuttle piston and rubber seal) 12 IFO98949 Cistern Mounting Clip and Screw Kit 30 Sign Toilet Bowl S Trap, white 25 Inlet Pipe Assembly (Inlet tube with spigot end fitting) IFO90532 14 IFO90536 Sign Toilet Bowl S Trap, white, raised 26 IFO96769 Outlet Valve Assembly 10 IFO90533 Sign Toilet Bowl P Trap, white 27 IFO96765 Outlet Valve Seal (Cistern Seating Washer) 13 IFO90441 Sign Toilet Bowl P Trap, white, raised 28 IFO96771 Inlet Float Unit 16 IFO98015 Floor Mounting for Waterproofing 31 IFO96770 Float Rod Large Flush 17 IFO98381 Pan Screws x 4, White Screw Caps x 4, White Blind Cover Plugs x 4 36 IFO91930 Catch Lever 18 Ifo S-Trap Pan Back Inspection Opening Cover 38 Valve Frame Assembly IFO96199 IFO96772 20 IFO98951 Inner Cistern - Tank only 21 IFO96759 Inlet pipe assembly (for Sign 6893 Model Only) 15 IFO90000 Inner Cistern Assembly Complete (Incl. Outlet 37 IFO90437 Sign Toilet Bowl white (for Sign 6893 Model Only) 29 IFO91965 Water distributor (for Sign 6893 Model Only) 34 IFO96761 Valve Assembly, Inlet Pipe Assembly, Inlet Valve Assembly. Excludes ceramic shroud, water distributor and flush button) 2 96660 5 98303 3 91782 7 98308 37 90000 121296766 96766 5 98303 6 98307 7 98308 1 196763 96763 141496761 96761 1515 96759 96759 212198951 98951 222296760 96760 11 11 90610 90610 91370 913702323 343491965 förför 6893/6894 91965 6893/6894 96773 24 96771 16 30 98949 96770 17 31 98015 36 98381 38 96199 8 96767 96765 13 25 90532 26 90536 Version: Dec 16 Call 1300 369 273 www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 1300 369 273 Fax: 02 8556 4055 27 90533 28 90441 20 96772 10 96769 96768 9 91930 18 29 90437
Ifö Sign, Sign Fix 6860, 6861, 6862, 6870, 6872, 6873 Part Code IFO98381 x 4 Z 3 (pozidriv) x 4 GB /For simple access to spare parts, save these instructions! tu viegli piekļūt rezerves daļām! Installatør/Installer/ Paigaldaja/ Instaliavo/ Uzstādī tājs Dato/Date/Kuupäev/ Data /Datums