DECLARATION OF PERFORMANCE No. 0079 EN 1. Unique identification code of the product-type: fischer injection system FIS EM 2. Intended use/es: Product Metal anchors for use in concrete (heavyduty type) Intended use/es For fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings, see appendix, especially Annexes B 1 to B 11 3. Manufacturer: fischerwerke GmbH & Co. KG, Otto-Hahn-Straße 15, 79211 Denzlingen, Germany 4. Authorised representative: -- 5. System/s of AVCP: 1 6a. Harmonised standard: --- Notified body/ies: --- 6b. European Assessment Document: ETAG 001; 2013-04 European Technical Assessment: ETA-10/0012; 2016-02-15 Technical Assessment Body: DIBt Notified body/ies: 1343 MPA Darmstadt 7. Declared performance/s: Mechanical resistance and stability (BWR 1) Essential characteristic Characteristic values under static and quasi-static action for design according to TR 029 or CEN/TS 1992-4:2009, Displacements Characteristic resistance for seismic performance categories C1 and C2 for design according to Technical Report TR 045, Displacements Performance See appendix, especially Annexes C 1 to C 10 See appendix, especially Annexes C 11 to C 14 Safety in case of fire (BWR 2) Essential characteristic Reaction to fire Resistance to fire Performance Anchorages satisfy requirements for Class A1 No performance determined (NPD) 8. Appropriate Technical Documentation and/or Specific Technical Documentation: --- The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: Andreas Bucher, Dipl.-Ing. Wolfgang Hengesbach, Dipl.-Ing., Dipl.-Wirtsch.-Ing. Tumlingen, 2016-02-22 - This DoP has been prepared in different languages. In case there is a dispute on the interpretation the english version shall always prevail. - The Appendix includes voluntary and complementary information in English language exceeding the (language-neutrally specified) legal requirements.
Appendix 1 / 30 Specific Part 1 Technical description of the product The fischer injection system FIS EM is a bonded anchor consisting of a cartridge with injection mortar fischer FIS EM and a steel element according to Annex A2. The steel element is placed into a drilled hole filled with injection mortar and is anchored via the bond between metal part, injection mortar and concrete. The product description is given in Annex A. 2 Specification of the intended use in accordance with the applicable European Assessment Document The performances given in Section 3 are only valid if the anchor is used in compliance with the specifications and conditions given in Annex B. The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works. 3 Performance of the product and references to the methods used for its assessment 3.1 Mechanical resistance and stability (BWR 1) Essential characteristic Characteristic values under static and quasi-static action for design according to TR 029 or CEN/TS 1992-4:2009, Displacements Characteristic values for seismic performance categories C1 and C2 for design according to Technical Report TR 045, Displacements Performance See Annex C 1 to C 10 See Annex C 11 to C 14 3.2 Safety in case of fire (BWR 2) Essential characteristic Reaction to fire Resistance to fire Performance Anchorages satisfy requirements for Class A1 No performance assessed 3.3 Hygiene, health and the environment (BWR 3) Regarding dangerous substances there may be requirements (e.g. transposed European legislation and national laws, regulations and administrative provisions) applicable to the products falling within the scope of this European Technical Assessment. In order to meet the provisions of Regulation (EU) No 305/2011, these requirements need also to be complied with, when and where they apply. 3.4 Safety in use (BWR 4) The essential characteristics regarding Safety in use are included under the Basic Works Requirement Mechanical resistance and stability. Fraunhofer IRB, ID: Fischerwerke
Appendix 2 / 30 4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base In accordance with guideline for European technical approval ETAG 001, April 2013 used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of Regulation (EU) No 305/2011 the applicable European legal act is: [96/582/EC]. The system to be applied is: 1 Fraunhofer IRB, ID: Fischerwerke
Appendix 3 / 30
Appendix 4 / 30
Appendix 5 / 30
Appendix 6 / 30
Appendix 7 / 30
Appendix 8 / 30
Appendix 9 / 30
Appendix 10 / 30
Appendix 11 / 30
Appendix 12 / 30
Appendix 13 / 30
Appendix 14 / 30
Appendix 15 / 30
Appendix 16 / 30
Appendix 17 / 30
Appendix 18 / 30
Appendix 19 / 30
Appendix 20 / 30
Appendix 21 / 30
Appendix 22 / 30
Appendix 23 / 30
Appendix 24 / 30
Appendix 25 / 30
Appendix 26 / 30
Appendix 27 / 30
Appendix 28 / 30
Appendix 29 / 30
Appendix 30 / 30