CATALOGUE 2018/19: SCOPE STORAGE

CATALOGUE 2018/19: SCOPE STORAGE +61 7 5478 9977 sales@smartlinemachinery.com www.smartlinemachinery.com PO Box 532, Buderim, Qld, 4456 55 Cordwell Rd, Yandina, Qld, 4561

2 Smartline Scope Drying &/or Storage Cabinets Maximise Scope Storage Validity: Minimise Risk of Damage. Available from 2019 (Images indicative only) RotaScope Endoscope Storage & Drying Cabinet. 9 scope capacity (hanging.) 600mm(W) x 600mm(D) x 2335mm(H). Compliant with EN16442. TGA Approved. Approved 7-Day Storage. Compatible with all AER and Scope brands. RFID Scope Data Monitoring. LinearScope ENT / TOE TOE/ENT Airflow Cabinet. Fan-forced air ventilation only. Available in 3 sizes - 4, 7 and 10 capacity. Storage Cabinet. Suits ENT Scope and Toe Probe types, including TEE, Truss, Brachy, TOE, ENT Scopes. SlidaScope Endoscope Storage & Drying Cabinet. 8 scope capacity (drawer.) 600mm(W) x 600mm(D) x 1810mm(H) (2140mm with SAB.) Compliant with EN16442. Compatible with all AER and Scope brands. RFID Scope Data Monitoring Baskets and autoclavable hose kits included. Available from 2019. Cabinet information screen Scope hooks inside cabinet Baskets & autoclavable hose kits

Smartline Print reciept of scope processing & storage record Cabinet + Data + Air = EN16442 COMPLIANCE Manual wash & leak test 3 Storage in RotaScope Cabinet Washer Validation & print receipt (scope processing record) Scan Scope into and out of AER washer SHARED AIR BOX Converts cabinet to a forced air drying cabinet compliant with EN16442 Standards. Independent HEPA filtered shared air supply. One Shared Air Box (SAB) can be used for two cabinets for cost savings. Low maintenance. DATA SYSTEM Data System supports evidence-based best practice. Utilises RFID operator and scope tags to record and report operator activity and individual scope status from washer to bedside or washer to cabinet to bedside. Reduces the risk of reporting errors and in alignment with guidelines. Includes stringent monitoring of cabinet temperature, pressure and humidity. Utilises RFID Operator and Scope tags to record and report individual scope status. COMPLIANCE RotaScope & SlidaScope Endoscope Storage & Drying Cabinets awarded Certificates of Compliance to EN16442. Independent testing by Biotech-Germande in France confirmed both the RotaScope & SlidaScope comply with all nine applicable requirements under EN16442 Standards. Testing incorporated a diverse range of scope families covering all of the major endoscope manufacturing brands, including Olympus, Fujinon and Pentax.

4 ROTASCOPE CABINET Smartline RotaScope - Single Door (09.SC-G-S) Endoscope Storage Cabinet. Single door with data & locking TGA Approved. EN16442 Compliant. Approved 7-Day Storage. 9 Scope Capacity (soft hang hooks). 600mm(W) x 600m(D) x 2335(H) (or 2665mm with SAB). Doors left or right opening. Compatible with all AER and Scope brands. Approved Olympus Hose Kits included. RFID Scope Data Monitoring. User-friendly electronic tracking and scope validation. Colour lighting indicates when cabinet cleaning required. Fault reporting as per EN16442 Standards. RotaScope - Pass-Through Doors (09.SC-G-P) Endoscope Storage Cabinet. Pass-Through doors with data & locking TGA Approved. EN16442 Compliant. Approved 7-Day Storage. 9 Scope Capacity (soft hang hooks). Available from 600mm(W) x 600m(D) x 2335(H) (or 2665mm with October SAB). 2018 Doors left or right opening. Interlocking keyless entry. Compatible with all AER and Scope brands. Approved Olympus Hose Kits included. RFID Scope Data Monitoring. User-friendly electronic tracking and scope validation. Colour lighting indicates when cabinet cleaning required. Fault reporting as per EN16442 Standards. RotaScope - X-Ray Rated Doors (09.SC-G-X) Endoscope Storage Cabinet. X-Ray Rated doors with data & locking TGA Approved. EN16442 Compliant. Approved 7-Day Storage. 9 Scope Capacity (soft hang hooks). 600mm(W) x 600m(D) x 2335(H) (or 2665mm with SAB). Doors left or right opening. Interlocking keyless entry. Compatible with all AER and Scope brands. Approved Olympus Hose Kits included. RFID Scope Data Monitoring. User-friendly electronic tracking and scope validation. Colour lighting indicates when cabinet cleaning required. Fault reporting as per EN16442 Standards.

Smartline SLIDASCOPE CABINET 5 SlidaScope - Single Door (09.DC-B-SS) Endoscope Storage Cabinet. Single door with data & locking (Image indicative only) Complies with EN16442 Standards. Available 8 scope capacity (drawer). from 2019 Doors left or right opening. 600mm(W) x 600m(D) x 1810(H) (or 2140mm with SAB). Compatible with all AER and scope brands. Utilises universial basket system. Baskets and autoclavable hose kits included. RFID Scope Data Monitoring. Colour lighting indicates when cabinet cleaning required. SlidaScope - Pass-Through Doors (09.DC-B-SP) Endoscope Storage Cabinet. Pass-Through doors with data & locking (Image indicative only) Complies with EN16442 Standards. Available 8 scope capacity (drawer). from 2019 Doors left or right opening. 600mm(W) x 600m(D) x 1810(H) (or 2140mm with SAB). Compatible with all AER and scope brands. Utilises universial basket system. Baskets and autoclavable hose kits included. RFID Scope Data Monitoring. Colour lighting indicates when cabinet cleaning required. SlidaScope - X-Ray Rated Doors (09.DC-B-SX) Endoscope Storage Cabinet. X-Ray Rated doors with data & locking (Image indicative only) Complies with EN16442 Standards. Available 8 scope capacity (drawer). from 2019 Doors left or right opening. 600mm(W) x 600m(D) x 1810(H) (or 2140mm with SAB). Compatible with all AER and scope brands. Utilises universial basket system. Baskets and autoclavable hose kits included. RFID Scope Data Monitoring. Colour lighting indicates when cabinet cleaning required.

6 Smartline Shared Air Box (09.SAB-B) HEPA Filtered Air & Vacuum supply for 1 or 2 cabinets AIR Generates HEPA Filtered Air & Vacuum supply for 1 or 2 Scope Storage Cabinets. For use with EN16442 Compliant Cabinets. Acrylic housing reduces noise & vibration. Designed to sit on top of one Cabinet if ceiling height above 2.7m. Optional Wall Mounting Kit available if ceiling height under 2.7m. Dimensions 60cm x 60cm x 33.4cm High. Requires 240V 50Hz Single Phase Power 6.5A. Airflow Capacity: 47m3/hour at -230mbar vacuum/+290mbar Shared Air Box Wall Mount Kit (09.SC-SB-WMK) Shared Air Box Wall Bracket Kit 2 x 500mm x 500mm Stainless steel wall brackets. 1 x 600mm x 700mm Wall mounting board (16mm melamine). Wall mount screws not supplied and site specific components must be decided upon and purchased prior to installation. NOTE: Structural Engineer required to inspect & certify location is structurally sound to support 60kg cantilevered load. RotaScope Bulkhead (09.SC-BH-1) Acrylic Bulkhed for installation above RotaScope cabinet 12mm Opal Acrylic Bulkhead. Includes: 2 x 12mm Opal Sides, 1 x 12mm Opal Front, Front and Side Flashing Strips, Required Fixings. 600mm(W) x 330mm(H) x 500mm(D). Delivered flat packed. Installation available upon request. Hose Extension Kit - 5m length - (09.SC-SB-EHK5) 10m length - (09.SC-SB-EHK10) Extension Air/Vacuum Hose Kit for one RotaScope Cabinet Connects to & extends 1m hoses supplied with RotaScope. Hoses can be cut to shorter length if required. 09.SC-SB-EHK5 includes 5m Shared Air Box Control Cable. 09.SC-SB-EHK10 includes 10m Shared Air Box Control Cable. Note: 2 Kits may be required for Wall Mounted SAB.

Smartline 7 Data System Starter & Software Kit (09.SY-SSK) DATA Scope tracking and countdown timing of Scope storage validility Initial System Starter Kit - can be modified to suit Site Specific Requirements. 1x SATO Sticker Printer KIt (additional kits available at extra cost). 1x AER Station Kit (additional kits available at extra cost). 1x 16 Port Switch (8 Port & 24 Port also available) (not shown). Minimum specification PC to be supplied by client. Please contact the Sales Team for details. Scope Cabinet Laptop Kit (09.SC-LK) For use with Smartline s RotaScope & SlidaScope Cabinets. Kit includes: 1x Laptop; 1x RFID dongle for programming tags; 10x Loan Scope Tags; 16GB USB Flash drive (Software and Manuals installed.) SATO Sticker Printer Kit (09.SC-SY-PS) Additional printer for Scope processing and storage records Used to print out one or more stickers showing details relating to last processing & remaining validity time of Scope. Would suit use in Theatres, Endoscopy Cleaning Room etc. 1x SATO Sticker Printer & Power Supply. 1x Printer Station & 5m cable to connect to Data Starter System. Longer cables are available at additional cost. Recommend at least one Printer Kit for the Scope Reprocessing Room + additional Printer Kits for each Procedure Room where Pass-Through Cabinets are accessed. 2x Label Rolls included - Additional rolls can be ordered in packets of 10 (46.L4062-40). Label Roll (suitable for SATO Sticker Printer Kit) (46.L4062-40) Sticker Label Roll. 40 x 62mm - 40mm Core - 800 Labels per roll. Min order quantity = 10 rolls.

8 AER Expansion Kit (09.SC-SY-AE) Optional Washer / Automatic Endoscope Reprocessor (AER) Writer Kit Suits up to Two AER Chambers (1st AER Writer kit is included with the Starter Kit). Allows Washer details to be added to Scope Tag at each cycle. Kit includes: 1x Washer Station, 2x Washer ID Plates, 1x 5m Connection Cable - longer cables available at additional cost. Smartline Printer Wall Mount Bracket Kit - 90 Degrees (09.SC-SY-PWM090) Stainless Steel Wall Mount Bracket - 90 Degrees. Suits the 09.SC-SY-SP SATO Sticker Printer. Printer will be set horizontally. Incorporates Power Pack bracket. Mounting bracket only - printer & associated parts are not included. Wall fasteners are not included. Printer Wall Mount Bracket Kit - 135 Degrees (09.SC-SY-PWM135) Stainless Steel Wall Mount Bracket - 135 Degrees. Suits the 09.SC-SY-SP SATO Sticker Printer. Printer will be set front down at 45 degrees below horizontal. Incorporates Power Pack bracket. Mounting bracket only - printer & associated parts are not included. Wall fasteners are not included. (Image indicative only) (Image indicative only) LinearScope - TOE 4 Hook Rack (09.LSR.TOERACK-4) 550mm Left to Right. Convert cabinetry. Racking featuring a linear rack equipped with easy hang scope brackets. Includes 49.TOE-DC01 - TOE Adaptor Double Cable 13-10 & 49.TOE325U - TOE Adaptor 32.5mm on each hook. LinearScope - TOE 7 Hook Rack (09.LSR.TOERACK-7) TOE HOOK RACKS 895mm Left to Right. Convert cabinetry. Racking featuring a linear rack equipped with easy hang scope brackets. Includes 49.TOE-DC01 - TOE Adaptor Double Cable 13-10 & 49.TOE325U - TOE Adaptor 32.5mm on each hook.

Smartline LinearScope - TOE 10 Hook Rack (09.LSR.TOERACK-10) 1195mm Left to Right. Convert cabinetry. Racking featuring a linear rack equipped with easy hang scope brackets. Includes 49.TOE-DC01 - TOE Adaptor Double Cable 13-10 & 49.TOE325U - TOE Adaptor 32.5mm on each hook. 9 Tip Protector for Scopes (Box of 100) (09.TIP-PRO-TECH) RotaScope Cabinet Vacuum Hose Kit for Fujinon and Pentax (09.SC-VHK) Olympus Endoscope Vacuum Hose Kit (09.VHK-OL) ACCESSORIES The ProTech is an endoscopic tip protector which provides a simple, safe, and highly effective method of protecting the delicate optics of an endoscope, while allowing the tip to breath and thus not allowing biofilm to form. Each tip is individually wrapped. Minimum order is 100. 9x 60cm 1/4 ID Clear Silicone Hoses with a barbed Luer Fitting at one end. 9x 60cm 1/4 ID Clear Silicone Hoses with a barbed Luer Fitting at both ends. 9x 60cm 5/32 ID Blue Silicone Hoses with a barbed Luer Fitting at both ends. 9x 60cm 5/32 ID White Silicone Hoses with a barbed Luer Fitting at both ends. Suitable to connect most Endoscope directly via client supplied scope cleaning adaptors to Cabinet Centre Post. Spare/additional hoses available at additional cost. RotaScope & SlidaScope Cabinet Set of Vacuum Hoses to suit most Olympus Endoscopes. Kit consists of: - 9x 47.SC-AWJ - Air/Water Junction Blocker. - 9x 47.VHB-1-BV14-4 - Biopsy Valve Hose. - 9x 47.VHC-1-6 - Connection Hose. - 9x 47.VHM-AW - Air/Water Channel Connection Hose. - 9x 47.VHW-1-AC-4 - Auxiliary Connector Hose.

10 Smartline Olympus Bronchoscope Vacuum Hose Kit (09.BHK-OL) RotaScope & SlidaScope Cabinet Set of Vacuum Hoses to suit most Olympus Bronchoscopes. Set suits ONE Bronchoscope & consists of: - 1 x 47.VHB-1-BV17-4 - Broch Biopsy Valve Hose. - 1 x 47.VHC-1-BPP-6 - Bronchial Port Hose. CABINETS FOR OTHER SCOPES (These Cabinets are NOT for use with Gastro or Endoscopes.) LINEARSCOPE LinearScope - 4 Rack TOE / ENT Cabinet (09.LSR.CABTOE-4) Scope Storage Cabinet with 4 racks for TOE / ENT scopes Scope Storage Cabinet, suits most ENT Scope & Toe Probe types and brands. 492mm(W) x 350mm(D) x 2100mm(H). 4 Scope Racks. Fan-forced air ventilation. LinearScope - 7 Rack TOE / ENT Cabinet (09.LSR.CABTOE-7) Scope Storage Cabinet with 7 racks for TOE / ENT scopes Scope Storage Cabinet, suits most ENT Scope & Toe Probe types and brands. 895mm(W) x 350mm(D) x 2100mm(H). 7 Scope Racks. Fan-forced air ventilation. LinearScope - 10 Rack TOE / ENT Cabinet (09.LSR.CABTOE-10) Scope Storage Cabinet with 10 racks for TOE / ENT scopes Scope Storage Cabinet, suits most ENT Scope & Toe Probe types and brands. 1212mm(W) x 350mm(D) x 2100mm(H). 10 Scope Racks. Fan-forced air ventilation.

Smartline LinearScope - Cable Management Rack 4 (09.LSR.CMR-4) Rack to hold and manage cables Suits 09.LSR-CAB-4 LinearScope Cabinets. Mounts to rear wall of cabinet. Convenient rack to hold Video Connector Blocks. 11 LinearDRY - 10 ENT Scope Hooks (09.LD-A-10) Scope Drying Cabinet with 10 ENT scope hooks LINEARDRY DRYING CABINET FOR use with NON-Gastro Scopes only. 10 ENT Scope Hooks. Acrylic plastic cabinet, toughened glass doors with key locking. Scope Connection Hose Kit supplied. Compatible with wall mounted HEPA Air Supply (09.SAB-B) Small cabinet footprint - 1260mmW x 350mmD x 2155mmH Approved for Non Lumen Scopes to 7 days storage. Drys in under three hours. ENTScope Cabinet - Single Door (09.SC-EE2-S) ENTSCOPE CABINET 600mm(L) x 600mm(W) x 2335mm(H) - or 2665mm(H) with SAB Scope capacity = 18 (2 levels, each with 9 ENT Scope Hooks). Rotary style scope hanger inside a acrylic cabinet with clear sides & access door. Height adjustable hook assembly. Optional top or wall mounted HEPA filtered air supply. Top storage disk includes air for channel drying. Optional Hose Kit available but not included. Lower disk for storage only. Optional data management. Integrates with RotaScope Data Management software for data and back-up. PLEASE NOTE: Other product variations are available upon request. Please contact the Smartline Sales Team on (07) 5478 9977 or email sales@smartlinemachinery.com.

+61 7 5478 9977 sales@smartlinemachinery.com www.smartlinemachinery.com PO Box 532, Buderim, Qld, 4456 55 Cordwell Rd, Yandina, Qld, 4561