Water Chiller Climate Control from incorporating Integrated FREE Hot Water Heating
Specifications * 24 Kw Power * All Stainless Steel Construction * FREE* Domestic Hot Water (during both Cooling and Heating) * Cooling and Heating * De-Humidifying Water Chiller Climate Control * Up to 16 Indoor Units * 230 Volt Power Supply (single phase) * Small Outdoor Footprint * Suitable for Home or Small Office * Various Indoor Units available (Wall Split Type, Floor/Ceiling Mount, Ducted) Hot Water A/c Flow to Indoor Units A/c from Indoor Units
Water Chiller Climate Control How Does It Work? The CD20KW gives total flexibility to various type of installation. It is ideal for either New Build or Retro Fit installations and unlike any other unit of this size on the market uses only single phase electricity. By utilising twin compressors and a "smart" control system, the system will only use one compressor until the demand requires that the second one comes on-line. This ensures both low running costs and the ability to work within 230 volts alternating currrent. Free Hot Water? Air conditioners traditionally remove the heat from inside the building by transferring the heat to an inert gas and then radiating the heat to the outside. Whilst this system is efficient in terms of cooling the building, part of the cost of running air conditioning units is used to "throw" that heat away. Cooling Direct have developed the new CD20KW to use that heat and by passing it through a highly efficient plate heat exchanger, transfers that heat to a separate system that is connected to the hot water supply in the storage tank or directly to the hot water system (like a combi boiler). This allows the storage tank to be maintained at a minimum of 60o centigrade, more then enough to ensure constant hot water for showers, baths or washing. Therefore whilst the system is running in either heating or cooling mode, FREE* hot water is being supplied to the storage tank. Another use could be to heat a swimming pool or Jacuzi directly from the CD20KW, by supplying the hot water feed directly to the installed system. The CD20KW can be used all year round for total climate control to supply either heating or cooling to the building, with each room individually controlled via it's own remote control. This ensures that each segment of the building is maintained at a temperature suited for its use, one temperature for the lounge and totally separate temperatures for the bedrooms. The CD20KW therefore give total flexibility and ensures that the building is maintained at comfort levels throughout with no wasted heating or cooling in areas where it is not required and with the addition of hot water is ensuring the best return on investment and being environmentally friendly.
0871 871 2266 A/c and Hot Water Supplies Schematic Shower Hot Water Tank Shower Cold Water Supply Cold Water Supply Climate Control Hot/Cold Water Flow Climate Control Hot/Cold Water Flow Climate Control Hot/Cold Water Flow or Radiators Indirect Water Heating (A) or Radiators Direct Water Heating (B) or Radiators Hot Tub/Pool Water Heating (C)
Water Chiller Climate Control A /C Re turn A /C Sup p ly H o t w a te r re turn H o t w a te r sup p ly Working Principle Schematic Finne d he a t e xc ha ng e r C o m p e rsso r (Syste n 1) C o m p e rsso r Finne d he a t e xc ha ng e r (Syste n 2) Fo ur w a y va lve Fo ur w a y va lve H e a ting C o o ling T Filte r-d rie r N on-return va lve p um p Pla te he a t e xc ha ng e r 1 H o t w a te r p um p Pla te he a t e xc ha ng e r 2 (H e a t re c o ve ry c o nd a nse r) Exp a nsio n va lve T Exp a nsio n va lve Filte r-d rie r N on-return va lve
Water Chiller Climate Control CD20KW Specifications Cooling Capacity Kw 20 Heating Capacity Kw 23 Type Full-Sealed Scroll Compressor Quantity 2 Type R407C Refrigerant Capacity 6 + 6 Kgs Controller Thermostatic Expansion Brazed Plate Water Flow Rate 0.96 I/s Evaporator Water Pressure 17 KPa Cool/Heat Max Hydraulic Water Pump Pressure 0.2 MPa Plate Type Heat Max Water Exchange Unit Temperature 70oC Model Low noise Axial Fan Radiator Quantity 2 Air Velocity 5500 * 2 m3/h Length 1400mm Dimensions Width 760 mm Height 1140 mm Chilled Water Inlet 1.5 inch Pipe Outlet 1.5 inch Heat Water Inlet 1.5 inch Pipe Outlet 1.5 inch Operational Noise 65 db Wire Cross-section Area 10 mm2 Net Weight 300 Kgs Model Low Noise Axial Fan Radiator Quantity 2 Air Velocity 5500 * 2 m3/h Power Supply 230 volt ~ 50 Hz single phase Input Power 8.2 Kw in Cooling Mode Starting Current 95 amps Rated Current 38 amps Rated COP 2.44 COP Stepping Up/Down COP 2.44 COP Electrical Cost (running at full capacity) 8.3 Kw per Hour * equates to less then 70p per hour (estimated. Price depends on Electricity Supplier) * FREE Domestic Hot Water - is supplied whilst the unit is running in either Cooling or Heating Mode. Domestic Hot water can be supplied whilst the machine is off, but this incurs running costs. Cooling Direct Ltd Unit 10, Arrow Industrial Estate Eelmoor Road Farnborough Hampshire GU14 7QH
Water Chiller Climate Control Specifications CD10KW * 10 Kw Power * All Stainless Steel Construction * FREE* Domestic Hot Water (during both Cooling and Heating) * Cooling and Heating * De-Humidifying * Up to 6 Indoor Units * 230 Volt Power Supply (single phase) * Small Outdoor Footprint * Suitable for Home or Small Office * Various Indoor Units available (Wall Split Type, Floor/Ceiling Mount, Ducted) * Ideal for small apartments as an alternative to gas. Hot Water A/c Flow to Indoor Units A/c from Indoor Units This is the smaller system to the CD20KW but still offering the SAME FACILITIES of Climate Control and FREE Domestic Hot Water that are the features of the larger unit. This system is ideal as a replacement to conventional gas boiler heaters especially in areas where gas is not readily available. Hot water is available by either direct or indirect methods as in the CD20KW. 0871 871 2266
Water Chiller Climate Control CD10KW Specifications Cooling Capacity Kw 10 Heating Capacity Kw 11.5 Type Fully Sealed Scroll Compressor Quantity 1 Type R407C Refrigerant Capacity 4 Kgs Controller Thermostatic Expansion Brazed Plate Water Flow Rate 0.48 I/s Evaporator Water Pressure 17 KPa Cool/Heat Max Hydraulic Water Pump Pressure 0.2MPa Plate Type Heat Max Water Exchange Unit Temperature 70oC Model Low noise Axial Fan Radiator Quantity 1 Air Velocity 5,500 m3/h Length 800 mm Dimensions Width 800 mm Height 1140 mm Chilled Water Inlet 1.25 inch Pipe Outlet 1.25 inch Heat Water Inlet 1.25 inch Pipe Outlet 1.25 inch Operational Noise 63 db Wire Cross-section Area 6 mm2 Net Weight 175 Kgs Power Supply Input Power Starting Current Rated Current Rated COP Stepping Up/Down COP Electrical Cost (running at full capacity) 230 volt ~ 50 Hz single phase 4.1 Kw in Cooling Mode 95 amps 19 amps 2.44 COP 2.44 COP 4.5 Kw per Hour * equates to less then 35p per hour (estimated. Price depends on Electricity Supplier) * FREE Domestic Hot Water - is supplied whilst the unit is running in either Cooling or Heating Mode. Domestic Hot water can be supplied whilst the machine is off, but this incurs running costs. Cooling Direct Ltd Unit 10, Arrow Industrial Estate Eelmoor Road Farnborough Hampshire GU14 7QH