The Oil-sealed Liquid Ring Vacuum Pump System Built to NFPA 99 Specifications PUMPS AND SYSTEMS FOR HOSPITALS AND CLINICS Medical Vacuum TESTIMONIAL The reliability, noise reduction, and elimination of water were our driving forces for a decision to install 7 Vmax compact 0 HP oil-sealed units.we have eliminated short run times, frequent motor starts and coupling failures that were significantly affecting our abilities to keep up with repairs and maintenance. The energy and water conservation efforts have saved our facility approximately $40,000 annually. In addition, we will be starting up a new triplex 0 HP Dekker Vmax vacuum system for our Outpatient Services Building Addition that is slated to open this summer. Our overall expected annual savings by switching to the Oil-Sealed Liquid Ring Technology should increase to about $60,000 annually. Maintenance professionals know that liquid-sealed vacuum pump systems have many advantages over dry pump systems. However, water-sealed systems have several high-maintenance factors to manage and control, such as high water usage, corrosion and contaminated waste water. Oil-sealed systems do not have these problems. General advantages of liquid-sealed systems: More reliable Safer Quieter Lower maintenance Collaborative Engineering from Start-To-Finish Special advantages of oil-sealed systems: No water usage No contaminated waste-water Single and Two Stage Liquid Ring 6-,000 CFM No corrosion or scaling Operating temperature 50º - 75ºF 0,000 hour oil-change interval Special advantages of DEKKER Large Capacity Conical,000 to,000 CFM systems: DEKKER Vacuum Controller Patented DX-5 and DX-7 air/oil separators Specially formulated Vmaxol seal-fluid Optional Variable Frequency Drive original logo with Large Capacity,500 to 9,000 CFM Oil Sealed Liquid Ring 5-5,400 CFM Lubricated and Dry Rotary Vane -70 CFM Rotary Piston 8-,80 CFM text logos Call one of our solutions experts at 888-95-5444 today and let us help provide a solution for you. original LT logo with This was one of the best decisions for process improvement by our maintenance team. Your sales and service team made sure that the product arrived and was installed properly and the factory support has been outstanding. Thank you. 5-0,000 CFM Greg Widener Borgess Medical Center Manager, Maintenance & Engineering DISTRIBUTED BY Cost-saving Vmax oil-sealed vacuum pump systems at B.M.C. LT text logos Water Sealed MTH = Forte adjusted to change shape of letter, 5-9,000 CFM right click, convert to curves. 5-5,000 CFM DuraVane high vacuum lubricated rotary vane vacuum pumps INCREASE YOUR INDUSTRIAL VACUUM KNOWLEDGE 900 05 DKR_04_08/04_REV. GOLD STANDARD SUPPORT Your Knowledge-Backed Guarantee. Need help sizing a vacuum pump? Having application problems? With over 00 years of combined experience, we ve made it our business to know your needs as well as our systems capabilities.with DEKKER, you get a team of vacuum experts dedicated to helping you resolve system challenges, streamline processes, and optimize results. Call DEKKER: The Experts in Vacuum at 888-95-5444 for application expertise. Maintenance, service and repair so you keep operating at maximum efficiency. The Experts in Vacuum 888.95.5444 888.95.5444 900 05
HOSPITAL VACUUM: ABSOLUTELY CRITICAL...FAILUR THE DEKKER VACUUM SOLUTIONS APPROACH Application assessment Baseline evaluation Reliable Performance, Maximum Efficiency, Custom Dekker Vacuum Technologies offers vacuum system solutions in hospitals and medical facilities throughout the country... from large university hospitals to small community medical centers and clinics. One consultation with our vacuum experts will demonstrate the difference between our approach to providing vacuum solutions and that of the typical medical equipment supplier where the vacuum pump system is only a catalog item, often based on price, without taking particular site requirements into consideration. Our experts can provide you with a detailed vacuum solutions approach to optimize the efficiency of your medical vacuum systems. We can also help improve your bottom line and overall satisfaction by: Reducing Operating Costs Improving Reliability Lowering Maintenance Costs Stabilizing Vacuum Levels Improving Safety Reducing Operating Sound Levels presentation Medical vacuum applications in hospitals and clinics are far more critical than industrial applications. In surgical procedures, loss of vacuum can mean loss of lives. Therefore, the most reliable vacuum pump systems are required. The vacuum experts at DEKKER understand this and have designed specific solutions to meet these very demanding and critical needs. Variable discharge port High-efficiency single-stage design No metal-to-metal contact, no wear External sealed bearings At the heart of every Vmax NFPA 99 compliant MEDICAL oil-sealed liquid ring vacuum pump system are at least two high-efficiency Titan single-stage liquid ring vacuum pumps, known for heavy-duty construction, reliability, low operating noise levels and very low maintenance. DEKKER offers a complete range of accessories and carries a comprehensive inventory of pumps and parts. For emergency repairs, DEKKER takes pride in offering same-day shipping of most standard parts. DEKKER maintains an extensive domestic and global network of authorized service centers.
E NOT AN OPTION 0 HP, 0 SCFM (each, at 9 Hg) duplex NFPA 99 5 HP, 65 SCFM (each, at 9 Hg) triplex NFPA 99 HP, SCFM (each, at 9 Hg) duplex NFPA 99 Special Features DEKKER vacuum controller standard on all multi-pump systems Patented DX-5 and DX-7 air/oil separators Vmaxol - specially formulated low vapor pressure sealing fluid Optional Features Variable Frequency Drive (VFD) control option Standard Features DEKKER Vacuum Approach Maximum Performance Maximum Payback Maximum Efficiency Maximum Reliability Maximum Noise-reduction Modular Design Gold Standard Support Medical Design Benefits * Tracks vacuum system performance to prevent unplanned down-time and reduce costs * Flexible for user changes or upgrades * Remote monitoring capability via Ethernet * OnDek software adds advanced reporting and trouble shooting plus real-time remote monitoring via e-mail and cellular alert system * Eliminates oil carry-over concerns * Ensures clean environment * 0,000 plus operating hours without oil change * Oil prevents corrosion and scale build-up * Oil prevents bacteria growth * Oil is not used as a lubricant Benefits * Vacuum matches the speed of the vacuum pump to demand * Reduced energy consumption and power savings Benefits * Application assessment * Baseline evaluation * presentation * Pumps can handle carry-over of soft solids and fluids without damage * System typically operates at 50 4-75 4F, hot enough to prevent bacterial growth associated with closed-loop water-sealed systems * Use of water, corrosion and possibly contaminated waste, is completely eliminated * Quick ROI when replacing water-sealed liquid ring vacuum pump systems * Reduces maintenance costs associated with other vacuum pump systems * Closed-loop system with seal fluid cooled by air-cooled heat exchangers * Water cooling optional * Reduces overall cooling requirements and destructive pump cavitation * Scaling is eliminated * Operates over full vacuum range without overheating * External bearings, no contamination * No metal-to-metal contact assures continuous operation * Engineered to run below 80 dba * Exceptionally quiet * Small footprint * Easy installation and maintenance * Full -year warranty * Engineering and after sales assistance * Large stock of parts and accessories available on-call. * Extensive network of convenient authorized service centers * Rental program options for systems * NFPA 99 Compliant
Other Vacuum Available From DEKKER...well designed, reliable and economically priced LUBRICATED rotary vane vacuum pump systems built to NFPA99 specifications DuraVane lubricated rotary vane vacuum pump systems are available in multiple configurations, such as stack-mounted, base-mounted or tank-mounted units. DEKKER supplies NFPA 99 compliant medical packages for hospitals and laboratories in capacities ranging from 6-50 SCFM (at 9 Hg) per pump. All multi-pump systems are equipped with microprocessors, eliminating vacuum switches....exclusive design: fewer vanes OIL-FREE (dry) rotary vane vacuum pump systems built to NFPA 99 specifications are available in multiple configurations, such as stack-mounted, base-mounted or tank-mounted units. DEKKER supplies NFPA 99 compliant medical packages for hospitals and laboratories in capacities ranging from 5-0 SCFM (at 9 Hg) per pump. All multi-pump systems are equipped with microprocessors, eliminating vacuum switches. 75% vane insertion (50% more than other pumps) longer vane life! 0,000 hours WATER-SEALED liquid ring vacuum pump systems built to NFPA 99 specifications...heavy-duty construction and low noise levels For the recovery of anaesthetic gases, AquaSeal high-efficiency water-sealed liquid ring vacuum pump systems are the only vacuum pump systems that are 00% oil-free and are 00% safe for operation in WAGD applications. DEKKER supplies NFPA 99 compliant AquaSeal water-sealed liquid ring vacuum pump systems in capacities ranging from - 440 SCFM at 9 Hg per pump.the systems are reliable, quiet and low maintenance. Data is subject to change without notice. Call DEKKER: The Experts in Vacuum at 888-95-5444 for application expertise.
The Oil-sealed Liquid Ring Vacuum Pump System Built to NFPA 99 Specifications PUMPS AND SYSTEMS FOR HOSPITALS AND CLINICS Medical Vacuum TESTIMONIAL The reliability, noise reduction, and elimination of water were our driving forces for a decision to install 7 Vmax compact 0 HP oil-sealed units.we have eliminated short run times, frequent motor starts and coupling failures that were significantly affecting our abilities to keep up with repairs and maintenance. The energy and water conservation efforts have saved our facility approximately $40,000 annually. In addition, we will be starting up a new triplex 0 HP Dekker Vmax vacuum system for our Outpatient Services Building Addition that is slated to open this summer. Our overall expected annual savings by switching to the Oil-Sealed Liquid Ring Technology should increase to about $60,000 annually. Maintenance professionals know that liquid-sealed vacuum pump systems have many advantages over dry pump systems. However, water-sealed systems have several high-maintenance factors to manage and control, such as high water usage, corrosion and contaminated waste water. Oil-sealed systems do not have these problems. General advantages of liquid-sealed systems: More reliable Safer Quieter Lower maintenance Collaborative Engineering from Start-To-Finish Special advantages of oil-sealed systems: No water usage No contaminated waste-water Single and Two Stage Liquid Ring 6-,000 CFM No corrosion or scaling Operating temperature 50º - 75ºF 0,000 hour oil-change interval Special advantages of DEKKER Large Capacity Conical,000 to,000 CFM systems: DEKKER Vacuum Controller Patented DX-5 and DX-7 air/oil separators Specially formulated Vmaxol seal-fluid Optional Variable Frequency Drive original logo with Large Capacity,500 to 9,000 CFM Oil Sealed Liquid Ring 5-5,400 CFM Lubricated and Dry Rotary Vane -70 CFM Rotary Piston 8-,80 CFM text logos Call one of our solutions experts at 888-95-5444 today and let us help provide a solution for you. original LT logo with This was one of the best decisions for process improvement by our maintenance team. Your sales and service team made sure that the product arrived and was installed properly and the factory support has been outstanding. Thank you. 5-0,000 CFM Greg Widener Borgess Medical Center Manager, Maintenance & Engineering DISTRIBUTED BY LT text logos Water Sealed MTH = Forte adjusted to change shape of letter, 5-9,000 CFM right click, convert to curves. 5-5,000 CFM DuraVane high vacuum lubricated rotary vane vacuum pumps INCREASE YOUR INDUSTRIAL VACUUM KNOWLEDGE Cost-saving Vmax oil-sealed vacuum pump systems at B.M.C. DKR_04_08/04_REV. GOLD STANDARD SUPPORT Your Knowledge-Backed Guarantee. Need help sizing a vacuum pump? Having application problems? With over 00 years of combined experience, we ve made it our business to know your needs as well as our systems capabilities.with DEKKER, you get a team of vacuum experts dedicated to helping you resolve system challenges, streamline processes, and optimize results. Call DEKKER: The Experts in Vacuum at 888-95-5444 for application expertise. Maintenance, service and repair so you keep operating at maximum efficiency. The Experts in Vacuum 888.95.5444 888.95.5444
The Oil-sealed Liquid Ring Vacuum Pump System Built to NFPA 99 Specifications PUMPS AND SYSTEMS FOR HOSPITALS AND CLINICS Medical Vacuum TESTIMONIAL The reliability, noise reduction, and elimination of water were our driving forces for a decision to install 7 Vmax compact 0 HP oil-sealed units.we have eliminated short run times, frequent motor starts and coupling failures that were significantly affecting our abilities to keep up with repairs and maintenance. The energy and water conservation efforts have saved our facility approximately $40,000 annually. In addition, we will be starting up a new triplex 0 HP Dekker Vmax vacuum system for our Outpatient Services Building Addition that is slated to open this summer. Our overall expected annual savings by switching to the Oil-Sealed Liquid Ring Technology should increase to about $60,000 annually. Maintenance professionals know that liquid-sealed vacuum pump systems have many advantages over dry pump systems. However, water-sealed systems have several high-maintenance factors to manage and control, such as high water usage, corrosion and contaminated waste water. Oil-sealed systems do not have these problems. General advantages of liquid-sealed systems: More reliable Safer Quieter Lower maintenance Collaborative Engineering from Start-To-Finish Special advantages of oil-sealed systems: No water usage No contaminated waste-water Single and Two Stage Liquid Ring 6-,000 CFM No corrosion or scaling Operating temperature 50º - 75ºF 0,000 hour oil-change interval Special advantages of DEKKER Large Capacity Conical,000 to,000 CFM systems: DEKKER Vacuum Controller Patented DX-5 and DX-7 air/oil separators Specially formulated Vmaxol seal-fluid Optional Variable Frequency Drive original logo with Large Capacity,500 to 9,000 CFM Oil Sealed Liquid Ring 5-5,400 CFM Lubricated and Dry Rotary Vane -70 CFM Rotary Piston 8-,80 CFM text logos Call one of our solutions experts at 888-95-5444 today and let us help provide a solution for you. original LT logo with This was one of the best decisions for process improvement by our maintenance team. Your sales and service team made sure that the product arrived and was installed properly and the factory support has been outstanding. Thank you. 5-0,000 CFM Greg Widener Borgess Medical Center Manager, Maintenance & Engineering DISTRIBUTED BY Cost-saving Vmax oil-sealed vacuum pump systems at B.M.C. LT text logos Water Sealed MTH = Forte adjusted to change shape of letter, 5-9,000 CFM right click, convert to curves. 5-5,000 CFM DuraVane high vacuum lubricated rotary vane vacuum pumps INCREASE YOUR INDUSTRIAL VACUUM KNOWLEDGE 900 05 DKR_04_08/04_REV. GOLD STANDARD SUPPORT Your Knowledge-Backed Guarantee. Need help sizing a vacuum pump? Having application problems? With over 00 years of combined experience, we ve made it our business to know your needs as well as our systems capabilities.with DEKKER, you get a team of vacuum experts dedicated to helping you resolve system challenges, streamline processes, and optimize results. Call DEKKER: The Experts in Vacuum at 888-95-5444 for application expertise. Maintenance, service and repair so you keep operating at maximum efficiency. The Experts in Vacuum 888.95.5444 888.95.5444 900 05