MADE IN ITALY residential condensing D.H.W. up to 10 bar WORKING PRESSURE AISI 316 Ti TITANIUM D.H.W. 100% CONDENSING AGUAdens TM wall-mounted water heaters (16-22 -37 litres)
AGUAdensTM INSTANTANEOUS CONDENSING HOT WATER THE NEW GENERATION OF RESIDENTIAL GAS CONDENSING WATER HEATERS AGUAdens 16, 22 and 37 is the new range of residential wall-mounted gas instantaneous condensing water heaters, completely patented and assembled by Cosmogas. COMFORT AND DESIGN IN MINIMUM SPACE Only 30.5 cm of depth (48.4 cm for AGUAdens 37) to hold all the power of AGUAdens available on the market with a full range to deliver always maximum comfort. Thanks to its attractive and extremely compact design AGUAdens can be installed anywhere in the house and can easily fit in a kitchen cabinet. AGUAdens is available in 3 different versions with 16, 22 and 37 litres capacity (27, 35 and 62 kw power). R.V.C. AISI 316 Ti (Titanium) STAINLESS STEEL HEAT EXCHANGER The R.V.C. heat exchanger is made without weld joints and can bear a working pressure up to 10 bar. INTEGRATED CIRCULATING PUMP It ensures immediate D.H.W. when opening the tap and has an anti-limestone function that protects the R.V.C. from lime scale deposits. BROAD TURNDOWN RATIO 1:8 The COSMOMIX air/gas mixing system allows for a broad turndown ratio of 1:8. ECOLOGIC PREMIX BURNER The whole range of commercial water heaters is equipped with ecologic premix burners made of Fecralloy metal fibre. EASY INSTALLATION AND MAINTENANCE All AGUAdens components have a front access. All maintenance, adjustment and check operations are thus easy and quick. The front panel has a removable peephole for initial ignition adjustments. 2 wall-mounted 27-35 - 62 kw
AGUAdens TM Why choose AGUAdens: Savings and efficiency Condensing technology Vortex water flow meter Certified efficiency up to 107% Low power consumption Comfort Hot water immediately available abundantly and at a constant temperature Sleek design with back-lighting display Quiet and easy to use Operates with any system Easy installation and maintenance Reduced size and weight Construction quality AISI 316 Ti stainless steel R.V.C. heat exchanger Circulating pump inside the casing Turndown ratio 1:8 Ecology Fecralloy fibre premix burner Reduced gas emissions in the atmosphere Above class 5 (15 mg/kwh of NOx) built-in CIRCULATING PUMP up to 10 bar WORKING PRESSURE AISI 316 Ti TITANIUM D.H.W. 100% CONDENSING 3
A HEART OF TITANIUM PATENTED AISI 316 Ti (TITANIUM) STAINLESS STEEL R.V.C. PRIMARY HEAT EXCHANGER PATENTED EXCLUSIVE DESIGN - The R.V.C. heat exchanger, heart of the AGUAdens system, is the result of research and intensive testing combined with the know-how of Cosmogas which, for 50 years, has designed and patented heating and domestic hot water production systems. EXCEPTIONAL RESISTANCE AGAINST CORROSION - The 3 series of AISI 316 Ti (TITANIUM) stainless steel round tubes composing the R.V.C. heat exchanger are fastened without weld joints to keep stainless steel characteristics unaltered and provide the highest resistance against corrosion. All of this inside a resistant self-supporting single-piece unit made with an insulating compound to ensure durability. HIGH EFFICIENCY - The R.V.C. has been designed to reach an optimal exchange along the entire length of the exchanger and grant exceptional efficiency up to 107% with savings up to 30% compared to conventional water heaters. R.V.C. - TECHNOLOGY MADE IN COSMOGAS The R.V.C. heat exchanger is made of 3 series of round tubes (18 and 16 mm diameter), to avoid clogging and to grant: LARGE WATER FLOW GREAT EXCHANGE SURFACE LARGE WATER LOAD HIGH WORKING PRESSURE (up to 10 bar) 4
AGUAdens TM ECOLOGIC PREMIX BURNER Ecologic premix water heaters have a constant air/gas ratio at each point of the turndown range of the burner, decreasing polluting emissions and optimising efficiency. Of a round shape and made of Fecralloy metal fibre, Cosmogas ecologic premix burner spreads short and perfectly nourished flames. ADVANTAGES High-efficiency combustion Low polluting emissions (CO<8 ppm and NOx<13 ppm) Natural gas and LPG operating THE ONLY PRIMARY HEAT EXCHANGER THAT CAN WORK IN DIRECT CONTACT WITH MAINS WATER Cosmogas is the only manufacturer who can offer a Titanium primary heat exchanger that can be directly supplied by mains water guaranteeing a great resistance to the corrosion and the aggressiveness of chlorinated waters. Thanks to low inlet temperatures, the R.V.C. exalts the condensing effect and supplies D.H.W. even at high temperatures, maximizing savings and minimising thermal inertia. PREMIX BURNER COSMOMIX PATENTED PREMIX SYSTEM The innovating premix system used in AGUAdens condensing water heaters allows for an exceptional turndown ratio of 1:8. Variable fluid circulation allows flue gas/water upstream thermal exchange; this sets up a high efficiency that quickly leads to flue gas condensing. During the operating, input cold water is distributed on Ø16 and Ø18 mm round tubes series. The advantage of such a system is to utilise the condensing effect and get better outputs. 5
CONDENSING D.H.W. - THE ACTUAL ENERGY SAVER SAVES UP TO 100 COMPARED TO CONVENTIONAL WATER HEATERS New energy saving legislation and modern residential and commercial building insulation techniques, have significantly reduced heating needs, and it s going to decrease. With the diffusion of high performance showers, cascade showers, Jacuzzis, wellness and fitness centres, hot water usage is increasing as much as fuel consumption for its production. When considering that hot water is used 365 days a year and at all latitudes, saving on hot water production has become a priority. AGUAdens is the ideal solution for residential systems as well as for all plants requiring the production of large quantities of hot water, with peaks of high needs typical of sports facilities, industrial plants, gyms and wellness centres. This is where the cost-saving generated by condensation is even more relevant. Based on the number of withdrawal points and simultaneous use, you can choose one or more AGUAdens heaters for cascade sequence installations to meet any hot water need. Compared to conventional water heaters, with AGUAdens you will save up to 30%. 325 Average annual cost in Euros The chart shows the average annual cost of domestic hot water production for a family of three. 290 225 Open chamber water heater Sealed chamber water heater AGUAdens condensing water heater 100 saving with AGUAdens 6
ANTI-LEGIONELLA FUNCTION SAFE HOT WATER AGUAdens TM By producing hot water instantaneously, AGUAdens ensures maximum hygiene and prevents any risk of contamination from Legionella bacteria, which may, on the contrary, be the case when hot water is produced using storage tanks or boilers. When AGUAdens is used in combination with storage tanks, the control board -through the boiler sensorautomatically activates the anti-legionella cycle. DETAILS THAT MAKE THE DIFFERENCE COVER-BOX CERTIFIED FOR OUTDOOR USE AGUAdens is available for outdoor installation with the additional COVER-BOX, the ABS, anti-uv weather-resistant insulated cover. The fireproof polyethylene insulation, with high insulating power, provides an IP X5D protection degree and protects the water heater against frost. The Safety Kit complete with safety devices and expansion vessel are available upon request and can be integrated in the cover. The COVER-BOX is provided as standard, complete with: ABS anti-uv cover Brackets Drilling template Timer type CR04 to manage the device from within the house SIMPLE AND INTUITIVE CONTROL PANEL Control panel with digital back-lighting display for an easy and intuitive visualization of parameters, boiler phases, error messages, with electronic temperature control. Display back-lighting turns off after 5 minutes of inactivity (SAVE ENERGY). INTEGRATED CIRCULATING AND ANTI-LIMESTONE PUMP It guarantees instantaneous domestic hot water when opening the tap even when far from the water heater, and features an anti-limestone function that protects the R.V.C. from lime scale deposits, thus ensuring enhanced durability. 7
CASCADE SEQUENCE INSTALLATION IDEAL FOR HIGH D.H.W. NEEDS AGUAtank 200 litres + 2 AGUAdens 37 AGUAdens is the ideal solution for applications which need large quantities of hot water, such as sports facilities, restaurants, wellness centres, hair dressers, camping facilities, etc... thanks to the high capacity (35 l/min) and the possibility of cascade sequence installation of an endless number of units. Operating Conditions: AGUAtank 70 C D.H.W. production ( t 25 C) 4,260 lt/60 AGUADENS + AGUATANK PERFECT SEMI-RAPID SYSTEM AGUADENS LOW PRESSURE DROPS To optimise AGUAdens performance, Cosmogas has designed AGUAtank, an inertial storage tank (150-200 - 300-500 - 750-1000 litres capacity) that guarantees at all times: Constant and stable D.H.W. temperature even in case of small withdrawals Higher availability of D.H.W. during peak period withdrawals Limited ignitions of the burner in presence of small withdrawals, protecting the environment and guaranteeing a further saving The system satisfies both peak periods and continuous D.H.W. needs. A B C AGUAdens 16 AGUAdens 22 AGUAdens 37 INTEGRATED FLUE BACK PREVENTER COMFORT AND DESIGN IN MINIMUM SPACE In cascade sequence installations, AGUAdens ecologic premix burner features, as standard equipment, a flue back preventer (clapet) on the combustion circuit to prevent possible flue gas recirculation between different exchangers. Only 30.5 cm of depth (48.4 cm for AGUAdens 37) to hold all the power of AGUAdens available on the market with a full range to deliver always maximum comfort. Thanks to its attractive and extremely compact design AGUAdens can be installed anywhere in the house and can easily fit in a kitchen cabinet. 8
AGUAdens TM SIZE AND CONNECTIONS AGUADENS 16-22 AGUADENS 37 1 - Recirculation 3/4 2 - D.H.W. supply 1 3 - Gas inlet 3/4 4 - Cold water inlet 3/4 AGUAdens 16 and 22 1 AGUAdens 37 5 - Flue gas outlet 6 - Support brackets 7 - Condensate drain Ø20 8 - Air inlet/flue gas outlet 9 - Distance between centres with elbow 90 Code 62617244 10 - Vertical coaxial flue gas outlet 11 - Distance between centres with elbow 90 Code 62617234 12 - Horizontal coaxial flue gas outlet PIPE MODEL SPLIT SMOOTH PIPE SPLIT CORRUGATED PIPE SPLIT SMOOTH PIPE COAXIAL OUTLET PIPES OVERALL MAXIMUM LENGTH AGUADENS 16 AGUADENS 22 AGUADENS 37 Ø80/80 PP = 40 m Ø80/80 PP = 25 m Ø80/80 PP = 10 m Ø60/60 PP = 15 m Ø60/60 PP = 9 m - Ø80/80 PP = 20 m Ø80/80 PP = 13 m Ø80/80 PP = 6 m Ø50/50 PP = 7 m - Ø60/100 PP = 10 m Ø80/125 PP = 10 m FOR EACH 90 ELBOW, CONSIDER A LINEAR LOSS OF 1 m 9
TECHNICAL DATA TECHNICAL DATA AGUADENS UM 16 22 37 Type (Type of exhaust flue/combustion air intake) B23; B23P; C13; C33; C43; C53; C63; C83; C93 Category II2H3P II2H3P II2H3P CE type certificate (PIN) 0476CQ1097 0476CQ1097 0476CQ1097 Max. heat input NET (GROS) kw 25.5 (28.3) 32.0 (35.5) 57.8 (64.2) Min. heat input NET (GROS) kw 3.2 (3.6) 6.0 (6.7) 12.0 (13.3) Min./Max. useful heat output kw 3.30/27.0 6.14/33.5 12.85/61.0 Efficiency at max heat output NET (GROS) % 106 (96) 105 (95) 105 (95) Efficiency at min heat output NET (GROS) % 103 (93) 102 (92) 107 (96) G20 m 3 /h 2.70 3.38 6.11 Gas flow rate G25 m 3 /h 3.16 3.94 7.11 G30 kg/h 2.01 2.52 4.55 G31 kg/h 1.98 2.48 4.49 G20 mbar 20 20 20 Gas supply pressure G25 mbar 25 25 25 G30 mbar 30 30 30 G31 mbar 37 37 37 G20 mbar 15 15 15 Gas supply minimum pressure G25 mbar 15 15 15 G30 mbar 15 15 15 G31 mbar 15 15 15 G20 mbar 45 45 45 Gas supply maximum pressure G25 mbar 45 45 45 G30 mbar 45 45 45 G31 mbar 45 45 45 D.H.W. adjustment range C 40-75 40-75 40-75 D.H.W. flow rate (Δt 30 C) l/min 12.9 16.0 29.1 Domestic circuit minimum/maximum pressure bar 1/10 1/10 1/10 Minimum water flow l/min 2.5 2.5 2.5 Rated power supply voltage/ frequency V/Hz 230/50 230/50 230/50 Absorbed electric power W 169 162 235 Electric protection degree IPX4D IPX4D IPX4D Exhaust flue and air intake pipe diameter (split) mm 80 80 80 Exhaust flue pipe max. length (split) (80) m 20 12.5 5 Air intake pipe max. length (split) (80) m 20 12.5 5 Exhaust flue pipe diameter (coaxial) mm 60/100 60/100 80/125 Exhaust flue pipe max. length (coaxial) m 10 10 10 Equivalent length of a bend m bend 45 = 0.5m, bend 90 =1m Weighted CO (0% O2) (EN26:2015) GROS G20 ppm 11 19 10 G20 mg/kwh 20 29 16 Weighted NOx (0% O2) (EN26:2015) GROS G25 mg/kwh 20 30 16 G30 mg/kwh 26 38 20 G31 mg/kwh 24 34 20 G20 % 8.5/9.0 8.5/9.0 8.3/8.7 CO2 (%) at minimum/maximum power G25 % 8.5/9.0 8.5/9.0 8.3/8.7 G30 % 10.0/10.5 10.0/10.5 10.8/10.1 G31 % 10.0/10.5 10.0/10.5 10.8/10.1 Exhaust flue gas maximum temperature at appliance outlet C 90 90 90 Mass flow rate of exhaust flue gases kg/h 41.9 52.5 97.8 Head available at exhaust flue outlet Pa 60 60 60 Exhaust flue gas maximum temperature for overheating C 90 90 90 Max. negative pressure in exhaust flue system Pa 60 60 60 Condensate maximum flow rate l/h 3.2 4.0 7.2 Condensate average acidity PH 4 4 4 Operating environment temperature C 0 ; +50 0 ; +50 0 ; +50 Weight of the appliance kg 36 36 48 10
AGUAdens TM OPERATING SCHEME CONNECTIONS EXAMPLES 3 4 2 2 6 5 1 7 21 When there is a need to meet peak withdrawals without increasing the power of the water heater, AGUAdens can be combined with the AGUAtank storage tank. CONNECTION TO AGUATANK 10 11 CONNECTION WITH RECIRCULATION 14 8 12 9 13 15 23 Thanks to its integrated circulating pump, AGUAdens provides D.H.W. also to installations which are very distant from the water heater. 16 22 17 18 19 20 CONNECTION TO SOLAR POWER PLANTS 1 - Hot water temperature sensor 2 - Support hooks 3 - Air intake 4 - Flue gas outlet 5 - Sealed chamber 6 - Flue gas temperature sensor 7 - Fecralloy fibre premix burner 8 - Fan 9 - Gas valve 10 - Condensate collection siphon 11 - Circulating pump 12 - Flue back preventer 13 - Cold water temperature sensor 14 - Circulation temperature sensor 15 - Safety valve 16 - Gas tap 17 - Hot water supply 18 - Gas supply 19 - Condensate drain 20 - Cold water inlet 21 - Safety temperature sensor 22 - Return circulation 23 - Flow meter AGUAdens can be connected to solar power plants and intervenes only when solar radiation is insufficient to deliver the temperature of D.H.W. requested. D.H.W. SAFETY KIT For power capacities higher than 35 kw, the safety kit suitable for D.H.W., complete with shut-off valve, is available for installation in combination with the recirculation circuit or storage tank. 11
62401337 - Maggioi 2017 - WITH THE AIM OF CONSTANTLY DEVELOPING AND IMPROVING IT S PRODUCTS, COSMOGAS RESERVES THE RIGHT TO MODIFY, UPDATE AND IMPROVE, AT ANY TIME, THIS FOLDER. Massimiliano Pieraccini COSMOGAS International Certifications COSMOGAS srl Via L. da Vinci, 16 47014 MELDOLA (FC) ITALY Tel. +39 0543.49.83.70 Fax +39 0543.49.83.92 www.cosmogas.com info@cosmogas.com EU Ukraine Boilers designed, patented and manufactured by us Eurasian Union USA USA Canada Contact us Copyright COSMOGAS - ALL RIGHTS RESERVED AUTHORIZED DEALER PURCHASE ORDERS - export@cosmogas.com SPARE PARTS - export@cosmogas.com