SVENSK STANDARD SS-EN ISO 8257-2:2006 Fastställd 2006-04-12 Utgåva 1 Plast Sprutmassor av poly(metylmetakrylat) (PMMA) Del 2: Beredning av provkroppar och bestämning av egenskaper (ISO 8257-2:2001) Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001) ICS 83.080.20 Språk: engelska Publicerad: maj 2006 Copyright SIS. Reproduction in any form without permission is prohibited.
Europastandarden EN ISO 8257-2:2006 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 8257-2:2006. The European Standard EN ISO 8257-2:2006 has the status of a Swedish Standard. This document contains the official English version of EN ISO 8257-2:2006. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon 08-555 520 00. Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Postadress: SIS Förlag AB, 118 80 STOCKHOLM Telefon: 08-555 523 10. Telefax: 08-555 523 11 E-post: sis.sales@sis.se. Internet: www.sis.se
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 8257-2 April 2006 ICS 83.080.20 English Version Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001) Plastiques - Poly(méthacrylate de méthyle) (PMMA) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 8257-2:2001) Kunststoffe - Polymethylmethacrylat (PMMA)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung der Eigenschaften (ISO 8257-2:2001) This European Standard was approved by CEN on 16 March 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8257-2:2006: E
EN ISO 8257-2:2006 (E) Provläsningsexemplar / Preview Contents Page 1 Scope... 1 2 Conformance... 1 3 Normative references... 1 4 Preparation of test specimens... 2 5 Conditioning... 4 6 Determination of properties... 5 ii
EN ISO 8257-2:2006 (E) Foreword The text of ISO 8257-2:2001 has been prepared by Technical Committee ISO/TC 61 "Plastics of the International Organization for Standardization (ISO) and has been taken over as EN ISO 8257-2:2006 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 8257-2:2001 has been approved by CEN as EN ISO 8257-2:2006 without any modifications. iii