LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

Similar documents
LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 03 Wien,

to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 02 Wien,

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 02 Wien,

CERTIFICATE. für die überwachte Fertigungsstätte for the approved factory. Bisol Proizvodnja d.o.o Latkova vas 59a 3312 Prebold Slovenia

Battery supplied electronic ballast for emergency lighting EATON, EATON CROMPTON, EATON JSB or EATON MENVIER

INTERNATIONAL STANDARD NORME INTERNATIONALE

DECLARATION OF PERFORMANCE. No EN

European Technical ETA-10/0305 Assessment of 6 December 2017 General Part

PAKISTAN STANDARD LED MODULES FOR GENERAL LIGHTING (SAFETY SPECIFICATIONS) PS: _5211/2017 ICS:

DECLARATION OF PERFORMANCE. No EN

Consumer Protection: Standardized International Product Labels: 2. Scope of Labelling

European Technical Assessment. ETA-12/0208 of 26 May English translation prepared by DIBt - Original version in German language.

DECLARATION OF PERFORMANCE. No EN

AS/NZS :2003 Luminaires - Part 1: General requirements and tests

DECLARATION OF PERFORMANCE. DoP: 0124 for fischer Ceiling Anchor FDZ (Metal anchors for use in concrete (light-duty type)) EN

DECLARATION OF PERFORMANCE. No EN

Report VNLF Test Report

DECLARATION OF PERFORMANCE. No EN

Stanley Black & Decker Deutschland GmbH Richard-Klinger-Straße Idstein DEUTSCHLAND. Manufacturing plant Manufacturing Plant 4 and Plant 9

DECLARATION OF PERFORMANCE. DoP: 0094 for Injection System fischer FIS V (Bonded anchor for use in concrete) EN

European Technical Assessment. ETA-17/0624 of 8 September English translation prepared by DIBt - Original version in German language

European Technical Assessment. ETA-05/0069 of 3 July English translation prepared by DIBt - Original version in German language.

Sylproof Superia LED G2

Report VNNF Test Report

DECLARATION OF PERFORMANCE. DoP: 0135 for fischer injection system FIS EM Plus (Bonded anchor for use in concrete) EN

DECLARATION OF PERFORMANCE

European Technical Assessment. ETA-15/0440 of 6 July English translation prepared by DIBt - Original version in German language.

1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?

Überwachte Fertigungsstätte

AS/NZS IEC 62560:2014

DECLARATION OF PERFORMANCE. No EN

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 6

European Technical Assessment. ETA-11/0360 of 6 October English translation prepared by DIBt - Original version in German language.

English translation prepared by DIBt - Original version in German language. Nails

European Technical Assessment. ETA-07/0219 of 19 September English translation prepared by DIBt - Original version in German language

European Technical Assessment. ETA-08/0315 of 15 May General Part. Technical Assessment Body issuing the European Technical Assessment:

IECEx Certificate of Conformity

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

AS/NZS IEC :2013

Shipboard incinerators with capacities up to 4000 kw

EC-Type Examination (Module B) Certificate. A.1/3.11 b "B" dass divisions, fire integrity

European Technical Assessment. ETA-11/0240 of 7 May English translation prepared by DIBt - Original version in German language.

European Technical Assessment. ETA-11/0288 of 10 September English translation prepared by DIBt - Original version in German language

Table of Contents FOREWORD... 3 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS REQUIREMENTS...

Record of Amendments. Version Date Amendment Section/page affected

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014

ei DG UV Test EC-Type Examination (Module B) Certificate A.1/3.27 a Penetrations through "B" Class divisions (electric cable transits)

European Technical Assessment. ETA-12/0166 of 18 June English translation prepared by DIBt - Original version in German language.

EC-Declaration of Conformity

XEON. High impact resistant body and PC cover. Double layer coating. through wiring. Build-in microwave sensor.

DECLARATION OF PERFORMANCE. No EN. Annexes B 1 to B 4

European Technical Assessment. ETA-10/0255 of 22 August General Part. Technical Assessment Body issuing the European Technical Assessment:

European Technical Assessment. ETA-14/0269 of 13 October General Part. Technical Assessment Body issuing the European Technical Assessment:

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 9

European Technical Assessment. ETA-15/0435 of 7 August English translation prepared by DIBt - Original version in German language.

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 4

European Technical Assessment. ETA-10/0352 of 6 July English translation prepared by DIBt - Original version in German language.

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

European Technical Assessment. ETA-08/0314 of 8 August General Part. Technical Assessment Body issuing the European Technical Assessment:

Trade name of the construction product Würth concrete screw W-BS 5 and W-BS 6. This version replaces ETA-16/0128 issued on 10 May 2016

Manual Isolating Barrier D461R1 (Revision 01)

EU Declaration of Conformity

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

Official Journal of the European Union. (Non-legislative acts) REGULATIONS

Centexbel. General certification regulations. Construction products

Integration of safety and security for effective control and protection of radioactive sources

EN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements

American National Standard

Report Test Report

European Technical Assessment. ETA-16/0515 of 14 December English translation prepared by DIBt - Original version in German language

MULTI-MONTI. European Technical Assessment ETA-05/0011. Concrete screw made of stainless steel for use in concrete

Trade name of the construction product Fix Master Injection system FIT-Ve 200 or FIT-Wi 200 for concrete. Karhutie 9 Fl NURMIJÄRVI FINNLAND

Trade name of the construction product Injection system Hilti HIT-HY 110. This version replaces ETA-13/1037 issued on 17 January 2014

European Technical Assessment. ETA-15/0435 of 21 December English translation prepared by DIBt - Original version in German language

C e r t i f i c a t e Of Conformity No.: 0560-CPD /AA/05

European Technical Assessment. ETA-14/0030 of 26 June General Part. Technical Assessment Body issuing the European Technical Assessment:

Regulation on the handling of explosives precursors

European Technical Assessment. ETA-14/0125 of 26 May General Part. Technical Assessment Body issuing the European Technical Assessment:

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

European Technical Assessment. ETA-14/0028 of 22 September General Part. Technical Assessment Body issuing the European Technical Assessment:

GNB-CPR Position Paper: Issuance of certificates under CPR

Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems

European Technical Assessment. ETA-13/0652 of 17 March English translation prepared by DIBt - Original version in German language.

MULTI-MONTI -plus European Technical Assessment ETA-15/0784

European Technical ETA-12/0607 Assessment of 18 January 2018 General Part

Manual Isolating Barrier D461 (Revision 05)

Transcription:

OVE n Electrotechnical Association 1010 Wien, Eschenbachgasse 9, ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, T +43 1 370 58 06 F +43 1 370 58 06-199 ENEC Certification Body registered under ID # 11. Validity of ENEC Licences can be checked at www.enec.com LICENCE to use the European Mark Licence No. 251-119 Date of issue: Wien, 2011 06 28 Rev. No. 01 OVE the n Electrotechnical Association as signatory to the "Agreement on the use of a commonly agreed Mark of Conformity for certain electrical equipment complying with European Standards" hereby grants the right to label the products mentioned hereunder and listed in the Annex with the Mark(s) shown above to the following company Licenceholder: Zumtobel Lighting GmbH Product: Luminaires for emergency lighting Trade Mark: Series/Type: Series ECOSIGN Basis for this given right is the conformity of the products with the requirements of the relevant Standard(s) as listed in the Annex and the fulfilment of articles 8 and 9 of the ENEC-Agreement by the manufacturer. This licence refers to the tested specimen and to all products manufactured strictly identical to the submitted one. This licence has been issued under the presumption and conditional on the fact that the licensee holds all necessary legal rights with regard to the product presented for testing and certification. n Electrotechnical Association Head of Testing & Certification Dipl.-Ing. W. Martin OVE Testing & Certification Accredited by the Federal Ministry of Science, Research and Economy as Certification Body for products within the scope as given in the official decree and published under www.en.bmwfw.gv.at/accreditation

Page 1/4 Hersteller Manufacturer Fertigungsstätte(n) Factory location(s) Zumtobel Lighting GmbH Zumtobel Lighting GmbH Typenbezeichnung Type reference Series ECOSIGN, see page 4/4 of Annex * Prüfbericht Test Report Nationale Bestimmung(en) National Standard(s) Europanorm(en) European Standard(s) TGM-VA EE 33793 SFT1/SFT2/SFT3, TGM-VA EE 33793a ECS, MA39-VFA2015-0315.01-.03 ÖVE/ÖNORM EN 60598-1:2009-11-01 ÖVE-LI/EN 60598-2-1:1989 ÖVE/ÖNORM EN 60598-2-22:2008-12-01 ÖVE/ÖNORM EN 62471:2009-05-01 EN 60598-1:2008 + A11:2009 EN 60598-2-1:1989 EN 60598-2-22:1998 + A1:2003 + A2:2008 EN 62471:2008 * Ersatz für Zertifikat Superseded licence 251-119 dated 2011 06 28 Items modified are marked with an asterisk (*) Anmerkung(en) Remark(s) WMT-procedure

Page 2/4 * Nennspannung Rated voltage Anzahl und Leistung der Lampen Rated wattage and number of lamps Lampentyp(en) Lamp identification Schutzgrad Degree of protection Netzanschluß Supply connection Befestigungsfläche Supporting surface Schutzklasse Class of protection Beschreibung des Aufbaus Description of construction * Zusatzinformation Additional information AC 220-240 V 2 LED-Modules with 6 LEDs each LED IP 65 IP 20 (types ECOSIGN LED TEC...) Screwless terminals or track adaptor Normally flammable surface Cl.I Ceiling or track mounting luminaires for emergency lighting for fixed installation. With housing made of plastic (plastic cover) and equipment rack made of sheet steel. Terminals for looping-in. Light source LED. With electronic control gear (SELV). In combination with track mounting adaptor for TECTON degree of protection IP 20

Page 3/4 Bauteil Code Hersteller Typenbezeichnung Konformitätszeichen Component Code Manufacturer Type Reference Mark(s) of conformity * Ballast B Tridonic EM POWER1 ENEC 12 * B Tridonic EM POWER2 ENEC 12 Terminal A Electro Terminal SLK3 450V, 16A, T110 Wiring A Nexans H05V2-U 0,5mm², 105 C Adaptor A Zumtobel 4574455 250V, 6A LED-Module C Nichia S6 1,5W 150x8x2,3 100 765-150 NS2W ENEC 10 VDE ENEC 14 -- A B C D The component is replaceable with another one, also certified, with equivalent characteristics. The component is replaceable if authorised by the test house. Integrated component tested together with the appliance. Alternative component.

Typecode: Annex to Licence No. 251-119 Rev. 01 Page 4/4 ECOSIGN. LED... Type of Ballast NT1, NT3, NSI, NDA, NPS Type of Lamp LED Mounting position AB... Surface mounting TEC... Tecton track mounting (IP 20) Ballast generation C none Luminaire series Accessories: AW... wall mounting bracket AW 90... wall mounting bracket 90 ASI 1500... rope mounting API 500... suspension tube