LABEXIA 800 LXA Glassware Washer-Dryer
Construction and Design Easy selection of 0 standard washing programs for numerous applications including: Chemistry glassware Bacteriology/virology (high temperature) Stubborn stains (agar) Volumetric glassware (low-temp) Many others The 800 LXA Washer-Dryer is the highest capacity washer in the Labexia family. The washer utilizes a vertical sliding door, that slides downward into the washer frame to open, eliminating the need for additional ceiling height. Ergonomic loading trolley allows for convenient loading and unloading of glassware as well as the ability to easily move items from one location to another in the lab. Six independent wash levels: Provide automatic connection of loading accessories (basic basket, injector racks) Racks interchangeable among levels Glassware determines rack placement and position Microprocessor Control Easily adjustable parameters (password-protected access) including: program phases, temperature and time of each phase and cleaning chemical dosing. Self-diagnostic program, with visual and audible alarms, alerts the user in the event of a malfunction enabling quick troubleshooting and maintenance. Complete cleaning is obtained with water circulated in the chamber via spray arms as well as through injectors directly inside of glassware. Chamber: AISI-6L stainless steel Exterior panels: AISI-0L stainless steel Double wall insulation: provides thermal and sound protection Detergent delivery system: liquid detergent automatically injected into wash chamber via peristaltic pump according to programmable parameters. Acid Neutralizer delivery system: liquid acid neutralizer automatically injected into wash chamber via peristaltic pump according to programmable parameters. Low level chemical alarms (visual and audible alerts) indicate when chemical levels are low. Multi Function Rack PST Basket Mechanical Washing System The 800 LXA has a powerful hydraulic circuit with water pressure for multiple washing levels. The 800 LXA provides optimal cleaning quality while minimizing water consumption. Uniform washing provided on all wash levels. Superior hydraulic design: Racks connect to hydraulic circuit via automatic, low profile valves Rear rack connections allow for maximum use of chamber volume Door holds racks in place ensuring positive rack connection and efficient flow of wash/rinse solution Top and bottom spray arms ensure complete washing and rinsing of glassware exterior, interior of large mouthed glassware and wash chamber. Programmable water rinses for hot, cold and hot/cold DI water. Cleaning Chemicals Available exclusively from Lancer, our premixed detergents and acid neutralizers are specifically made for use in all high pressure washers. LANCERCLEAN Detergent: Formulas (Potassium Hydroxide Based, Sodium Hydroxide Based, ph Neutral) LANCERACID Rinse: Formulas (Acetic Acid Based, Citric Acid Based, Phosphoric Acid Based) Injector Rack with
Overall Dimensions Chamber Dimensions Wash Levels 78.06 H x.0 W x.07 D (in) 98 H x 97 W x 80 D (mm) 0. H x.89 W x 0 D (in) 770 H x 06 W x 0 D (mm) to 6 with upper level height adjustable (8 positions) Drainage Voltage Net Weight Heat Loss Drain pipe diam.. inches, 7 to inches from floor 08 V- Ph, 0 V- Ph, 80 V- Ph 80 lbs,760 Btu/hr (00 Kcal/hr) Water Consumption 9.-. gal (-7 L) Noise Level <6 dba Recirculation Pump (flow rate) pumps at 9 gal/min (600 L/min) Compressed Air Shut Off Valve /8 inch hose barb fitting Heating 8 kw Pressure 9-87 psig Drying 7. kw Water Supply (Cold, Hot, DI) Connection Total Electric Power kw Flow Pressure Technical Data and Utilities ¾ inch hose thread 0 L/min ( ¼ gal/min) 9-87 psig Multiple Loading Configurations Lid Configuration Configuration Configuration Six Independent Wash Levels with eight loading positions allow for flexibility of multiple types of glassware in a single load to fit your specific application. Adjustable height on upper levels (8 positions) accommodates for taller glassware on the middle level. HEPA Filtered Injector Drying System: Complete and rapid drying of glassware with HEPA filtered forced air inside the washer chamber and directed into the glassware via rack injectors. Temperature is adjustable in C increments. On board chemical storage is provided via front loading chemical drawer. Features and Options Other available options include: Drain discharge cool down, low pressure valve, emergency stop button, external or internal printer, dosing pumps (up to ), steam condenser, steam heating, ph neutralization and IQ/OQ protocol. Contact Lancer for further details on these and other accessories and options. Accessories Wide range of accessories: If your lab needs higher throughput, the Labexia 800 LXA will easily adapt to your needs, as a myriad of accessories will enable you to wash on 6 independent levels pipettes, volumetric flasks, etc. Lancer has the optimal accessory for your application. (See rack catalog for further accessory options.) Multi Function Rack Chamber View Top 0. (770 mm) 7 8 0 Available height by rack position PST PSBT IXL IXC PST PSBT IXL IXC 6 9.06 0 7.09 80.99 0 9.06 0 9.9 6. 8 7.09 80.96 80 7 8 9 0.8.7.9 7.7 0 9. 70 9.8 0 7.7 0.7 7.6 700 6. 6 9. (9 mm) 9. (9 mm) 6 9 PST: Basic Basket, PSBT: Basic Basket with spray arm, IXL: Injection Rack (long jets), IXC: Injection Rack (short jets) Inches and mm shown
LANCER USA Inc. State Rd. 9 Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com www.lancer.com JJDE 07070 00 Lancer Sales USA Inc. Lancer is a registered trademark. Lancer is constantly reviewing its products for improvements. Consequently, the actual products may slightly differ from the products pictured and described here. Printed in the USA.
LANCER 800 LXA Laboratory Glassware Washer Description: The 800 LXA fully automatic washer / dryer has a programmable microprocessor capable of storing up to 0 programs ( pre-programmed, 6 user definable, password protected) for pre-wash, wash, acid rinse, purified/di rinse, HEPA filtered drying and cooling. These units are capable of injection cleaning on to 6 levels with 8 possible rack locations providing maximum capacity through multiple chamber configurations. Vertical sliding glass door slides down into the washer frame, eliminating the need for additional ceiling height. Chamber drying and direct injection drying is standard. Washer has on-board chemical storage with liquid level sensors. Contact LANCER: Lancer Sales USA Inc 0 Emma Oaks Tr Ste 0 Lake Mary, FL 76 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com - www.lancer.com Specifications: Dimensions: External: 78.06 H x.0 W x.07 D Internal: 0. H x.89 W x 0 D Wash chamber load area: 6 Wash Levels - 60 square inches per level,,0 square inches total 6 levels Loading Height: 7. (9 mm) Water Consumption: 9. to. gal per fill ( L - 7 L per fill) Heat Loss:,760 Btu/hr (,00 Kcal/h) Sound Level: <6 dba Cycles: pre-programmed, 6 user defined Injection Cleaning: to 6 levels with 8 possible rack positions Dosing: Automatic detergent and acid dosing via peristaltic pump Chemical Storage: Front access drawer Drying: HEPA filtered chamber and injector drying Standards: Manufactured under ISO 900 accreditation. Standard Features: Automatic Vertical Glass Sliding Door Dual action automatic opening and closing creates watertight seal Slides down to open for user safety and reduced ceiling height requirements Built of laminated safety glass to reduce noise and minimize heat loss to room Fully Extendable, Load Bearing Arms Support jet racks for loading and unloading of glassware Eliminate need for loading cart Spray System Includes two rotary spray arms in top of chamber / two rotary spray arms in bottom of chamber Spray arms made of # sanitary high-grade 6L stainless steel Easily disassembled for cleaning and maintenance System Wash Levels to 6 levels Rack actuated via automatic manifold connections when door is closed Racks are independent and easily removable for use on all levels Side by side racks - allows for washing of tall items (such as carboys) on one side with up to wash levels on the other side Super Drying System HEPA filtered chamber and direct injection drying Drying cycle is user programmable in C increments ().8 kw (7. kws total) heating elements and blowers provide drying up to 0 C Filter System Two stainless steel filters protect recirculation and drain pumps from debris Filters easily removed for cleaning Filters on all incoming water lines Peristaltic Detergent and Acid Pumps Provides precise addition of chemical agents Liquid Level Detection Low level chemical alarms alert user when chemical levels are low Wash Solution Heating System 8 kw electric heating elements provide heating up to 9 C Electronic Thermostat Independent selection of temperature for pre-wash, wash, acid rinse and final rinse between ambient and 9 C Microprocessor Control System User programmable with 0 storable programs and user definable functions Individually selected user programs stored in memory Systems Control Panel -½ inch LCD display window with -line x 6 characters and program naming capability Touch pad is waterproof and glove friendly Water Level Sensors Two independent sensors control chamber water level and prevent overflow Programming and Cycle Operation: Pre-Wash - Selects number of Pre-Washes (0 to ), length of Pre- Wash (up to 0 minutes), temperature of water (up to 9 C) and detergent dosing time. User can select hot, cold or purified water. Wash - Select length of Wash (up to 0 minutes), detergent dosing time and temperature of water (up to 9 C). User can select hot, cold or purified water. Running Water Rinse - Select number of rinses (0 to 9) Unit fills with water rinses for 0 seconds and drains. User can select hot, cold or purified water. Acid Rinse - Select length of Acid Rinse (up to 0 minutes), and amount of acid. User can select hot, cold or purified water. Running Water Rinse - Select number of rinses (0 to 9). Unit fills with water rinses for 0 seconds and drains. User can select hot, cold or purified water. Pure Water Rinse COLD - (DI Rinse) Select number of Pure Water Rinses (0 to ) and length of Rinses (up to 0 minutes). Pure Water Rinse HOT - (DI Rinse) - Select length of Hot Pure Water Rinse (Up to 0 minutes) and temperature of water (up to 9 C). Drying - Programmable for up to 90 min and up to 0 C Cooling - User selects length of cooling (up to 0 minutes) Version 9 - / 800 LXA Series - Pg
Safety Features: Door Interlocks and Photoelectric Sensor Prevents interference with wash cycle once it is in operation Stops closing of door in event of an obstruction Automatic Vertical Glass Sliding Door Slides down to open for user safety, eliminating the hazard associated with guillotine type vertical doors Ergonomic Top Loading Chemical Drawer Maximizes productivity while eliminating operator fatigue Optional Features: Steam Heating Stainless steel exchanger provides rapid heating of water in washer sump Drain Discharge Cool Down Wastewater is cooled to <60 C Cold water added to effluent during drain phase Water Softener Softens incoming hot and cold water Automatic regeneration after each wash cycle with low salt alarm RS Port Provides RS output for wash cycle process ph Special Programming Automatically adds base or acid solution to lower or raise ph level of effluent before discharge to building drain system Seismic Tie Down Kit Bracket allows for seismic anchoring Internal or External Printer For documenting evidence of cleaning process with detailed information Gravity Drop Drain Pneumatic valve to discharge wastewater to floor level drain Low Pressure Valve Kit Allows washer to operate properly when connected to a low pressure purified water source HAB Kit Stainless steel flanges allow for recessed installation of washer Chemical Dosing Pump For dosing of other types of chemicals to fit specific wash requirements Up to additional Third party testing Field labeling by independent NRTL (Nationally Recognized Testing Laboratory) for product safety certification Verify compliance with the UL Standard 600- Emergency Stop Button Shuts off all power to the washer Construction: Wash chamber Constructed of AISI 6L stainless steel High-grade finish is electronically welded under Argon protection Components Constructed of stainless steel or other materials impervious to the effects of detergents, additives and general laboratory chemical residues Insulation Synthetic, rubber based closed cell foam Guards against heat loss and reduces noise levels Accessories: Manual Transfer Carts Constructed of stainless steel allowing for easy transfer of glassware between multiple locations Available in levels (each side) Basic Basket Tray and Basket Tray with Spray Arm Washes glassware with a large neck or opening such as beakers A mesh cover available for holding items on the basket during the wash cycle Injector Racks Various combinations of jets (including different quantities, different diameters, short and/or long lengths) Allow for washing a wide variety of glassware Mesh hold-down screen available to prevent glassware from becoming dislodged during the wash cycle Version 9 - / Stainless Steel Mesh Baskets For cleaning smaller items Lids available Combination and Specialty Racks For washing specific items such as pipettes or for multiple types of items on one rack Customized Accessories Modification of existing standard racks or baskets Creation of completely customized accessories Preventative Maintenance: Annual Preventative Maintenance agreements ensure optimum washer performance and extend equipment life Validation Services Installation Qualification and Operational Qualification (IQ/OQ) testing can be executed at the customer site Documentation only packages available separately Cleaning Chemicals: LANCERCLEAN Detergent ( formulas) LANCERACID Rinse ( formulas) Specially formulated for use in high pressure washers Required Utilities: Hot Water Shut off valve with a threaded / inch male hose thread nozzle needed Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Maximum temperature: 0 C ( F) Cold Water Shut off valve with a threaded / inch male hose thread nozzle needed Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Purified Water Shut off valve with a threaded / inch male hose thread nozzle needed Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Steam Feed (for steam option only) Shut off valve, strainer and flexible steam hose for connection to washer s / inch male BSP threaded inlet. Steam pressure between 9 and 87 psig (00 to 600 kpa) Maximum consumption 6 lbs/hr, 66 lbs/cycle. Typically cycle per hour is used Steam Condensate Return (for steam condenser option only) Shut off valve, steam trap and flexible steam hose for connection to washers / inch male BSP threaded outlet Drain Connection Fixed standpipe and plumbing trap with a minimum inside diameter of / inches (0 mm) Height above finished floor level between 7 and inches (00 to mm) Flow rate: 0. gal/min (0 l/min) AS AN OPTION unit can be configured for floor draining with optional floor drain kit Overflow Safety Discharge Provide a floor drain connection or fixed discharge tube with an outside diameter of / inches ( mm) Maximum height above finished floor level 0 inches ( mm) Discharge flow rate: / gal/min (0 l/min) and maximum temperature 0 F (9 C) Exhaust Hood Preferred (unless room is well ventilated) Exhaust hood inches to 0 inches max. ( to 0 mm) above washers exhaust pipe Flow rate 60 CFM (0 m/h), maximum temperature 0 F (9 C) and maximum relative humidity 9%. Compressed Air Shut off valve with /8 inch hose barb fitting needed Pressure between 9 and 87 psig ( to 600 kpa) 800 LXA Series - Pg
Electricity (electric models) 08 V, 60 Hz, -Phase, kw, 9 A/Phase 0 V, 60 Hz, -Phase, kw, A/Phase 80 V, 60 Hz, -Phase, kw, A/Phase Electricity (steam heated models) 08 V, 60 Hz, -Phase, 7.kW, 0A/Phase 0 V, 60 Hz, -Phase, 7.KW, 9A/Phase 80 V, 60 Hz, -Phase, 7.kW, 9A/Phase Contact Lancer for Additional info on: Customization Maintenance Contracts Validation Services Cleaning Chemicals Version 9 - / 800 LXA Series - Pg
78.0 [ 98 ] FRONT Version 9 - / BACK FRONT TOP.6 [ 6 ].6 [ 6 ] NOTE: DIMENSIONS IN BRACKETS ARE IN MILLIMETERS. [ 8. ]. [ 8 ] 78.0 [ 98 ] 800 LXA EXTERNAL DIMENSIONS TOLERANCE: ±.0" CHAMBER DIMENSIONS Height: 78.06" Width:.0" Depth:.07" Height: 0." Width:.89" Depth: 0" Required Utilities: Hot Water/Cold Water/Purified Water (each requires) - shut off valve (threaded ¾ inch male hose thread) / flow rate of ¼ gal/min (0 l/min), pressure between 9 and 87 psig (00 to 600 kpa) Steam Feed (for steam option only) shut off valve, strainer and flexible steam hose (connected to washers ½ inch male BSP threaded inlet) / steam pressure between 9 and 87 psig (00 to 600 kpa) / maximum consumption: 6 lbs/hr (66 lbs/cycle) typically cycle used per hour Steam Condensate Return (for steam condenser option only) shut off valve and flexible steam hose (connected to washers ½ inch male BSP threaded outlet) Drain Connection fixed standpipe and plumbing trap (min. inside diam. ½ inches 0 mm) / height above finished floor 7- inches (00 mm) / flow rate: 0. gal/min (0 l/min) / AS AN OPTION unit can be configured for floor draining with optional floor drain kit Overflow safety discharge Provide a floor drain or fixed discharge tube with an outside diameter of ¼ inches ( mm). Maximum height above finished floor level 0 inches ( mm). Compressed Air shut off valve with /8 inch hose barb fitting, air pressure between 9-87 PSI (consumption is minimal) Exhaust Hood preferred (unless room is well ventilated) - min. air gap, max. 0 (Flow rate 60cfm) Electricity (electric models) 08 V, 60 Hz, -Phase, kw, 9 Amps 0 V, 60 Hz, -Phase, kw, Amps 60 V, 60 Hz, -Phase, kw, Amps Electricity (steam heated models) 08 V, 60 Hz, -Phase, 7. kw, 0 Amps 0 V, 60 Hz, -Phase, 7. kw,9 Amps 60 V, 60 Hz, -Phase, 7. kw, 0 Amps -0 REV. DATE Drawing # 800LXA Tag # Revision tech data Title: - GENERAL DRAWING OF THE WASHER - LANCER 800 LXA Drawn by: MB Checked by: Scale: /6 Sheet: / This plan is the exclusive property of LANCER INDUSTRIES and shall not be disclosed or reproduced without its written authorization. 800 LXA Series - Pg H SIDE
LANCER Glassware Washing Accessories
Lancer Washing Accessories: flexibility is the key to efficient cleaning Lancer Washers With over years of experience, Lancer is the industry leader in washing equipment. Providing glassware washers to the technological marketplace, Lancer offers a solution to suit any cleaning application. Lancer Glassware washers range from undercounters to free-standing units with varying capacities to suit any wash load. A variety of racks and accessories are available to accommodate all types of glassware and laboratory items. This brochure provides a comprehensive listing of accessories as well as rack placement guides to provide the information you need to choose the right accessory based on your glassware loads and wash cycle needs. Table of Contents Washing Accessories (80 LX/8 LX/80 LX /90 LX / LX /800 LXA)... Washing Accessories ( LXP)...6 Washing Accessories (600 LXP)...8 Rack Position Guides...0 Lancer offers the widest range of washers and accessories. If you have any questions or for further details please contact a Lancer Sales Representative at (800)-8 or visit our website at www.lancer.com. Lancer Glassware Washer Accessories
Lancer Washing: User Friendly Loading Systems p Telescopic Rails: baskets are mounted on fully load bearing rails in the extended position allowing for ease of loading and unloading of glassware. p Glassware Height Adjustment: adjustable star feet allow for various heights of glassware to be washed in the same load. Glassware is placed at the right position to obtain the optimum cleaning and drying results. p Customized Grids: adjustable and fixed support grids are available to optimize load patterns. Interchangeable Accessories p Utilizing the independent water connections at each level allows for baskets to be interchanged among levels, reducing the number of required accessories. p The 90 LX, LX, LXP, 600 LXP and 800 LXA washers are equipped with an additional water connection, allowing for placement of accessories at the required height depending on load configuration. Flexibility: 90 LX chamber shown with two accessories in three different loading configurations. Powerful Glassware Cleaning and Drying p Top and bottom spray arms ensure accurate cleaning of the outside surfaces of the glassware. p Independent water connections on each level guarantee optimal water pressure for cleaning the internal surfaces of the glassware. p Direction Injection Drying: hot air is directed through rack injectors and circulated throughout the washer chamber to ensure rapid drying of the glassware. (On models equipped with injection drying.) Lancer Glassware Washer Accessories
Washing Accessories for models: 80 LX / 8 LX / 80 LX / 90 LX / LX / 800 LXA LX 800 LXA 90 LX 80 LX 80 LX/8 LX 00 Injector Racks: mm diam short jets p small narrow neck glassware p 8 IXA - 8 jets p 6 IXA - 6 jets p IXA - jets p GCI - Cover for injector racks p GCI / - Half cover IXA Rack & 6 mm diam short jets IXLC Rack p small narrow neck glassware p 6 IXA/ - 6 jets p IXA/ - jets IXL Rack 6 mm diam short jets GCI Cover p 7 IXC / - half rack 7 jets p 6 IXC - 6 jets p IXC - jets p 8 IXC - 8 jets p IXC - jets 00 6 mm diam long and short jets p 6 IXLC - 6 jets p 8 IXLC - 8 jets p 6 IXLC - 6 jets p IXLC - jets 6 mm diam long jets p 0 IXL D6-0 jets p 6 IXL - 6 jets p 8 IXL - 8 jets p 6 IXL - 6 jets 8 mm diam long jets p 0 IXL - 0 jets Lancer Glassware Washer Accessories
00 00 PST Basket LTC / Basket PIP Rack STC Basket Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST - Basic basket p PSBT - Basic basket with spray arm 00 00 p GC - Cover for PST/PSBT p GC / - Half cover Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) p PPM - fine mesh for small items (attached cover) - mm x mm x 9 mm p PPM 80 - fine mesh for small items (attached cover) - 80 mm x 80 mm x mm Pipette Racks: p pipettes p PIP - grommet style p PPI B/B - canister style 00 00 00 PS 7 IXLC Rack BP Rack TN Trolley 00 Multipurpose Racks : p beakers p cones 00 00 p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PS/7 IXLC - / PST basket / 7 jets p PIP/0 IXLC - / pipettes 0 jets p EP/ IXLC - vol flasks jets p 0PIP/ IXLC - / pipette rack jets p PS/ IXLC/ PIP - PST pipettes jets Other Applications : p thin plates p culture dishes p watch glasses p 0 PL - Basket for thin plates p BP - Basket for culture dishes p SSC SSL - Supports p VM / - / basket for watch glasses Storage / Transport: Storage and transport of Lancer Accessories. p p p p RP - Stand to hold racks TN 90 LX - Door plus upper level trolley TN LX - Door plus two upper levels trolley TN 8 LXA - Door plus three upper levels trolley Base Cabinets : Stainless steel base cabinet for undercounter washers only. p p CAPN 8LX - SS plinth for 80 LX and 8 LX CAPN 8LX - SS plinth for 80 LX Lancer Glassware Washer Accessories
Washing Accessories for model: LXP LXP Injector Racks: mm diam short jets p small narrow neck glassware p 8 IXA LXP - 8 jets p IXA LXP - jets 00 p GCI LXP - Cover for injector racks IXA Rack p GCI / LXP - / Cover for injector racks IXL Rack IXC Rack & 6 mm diam short jets p small narrow neck glassware p 6 IXA/ LXP - 6 jets p 8 IXA/ LXP - 8 jets p IXA/ LXP - jets 6 mm diam short jets p 8 IXC LXP - 8 jets p 6 IXC LXP - 6 jets p 8 IXC LXP - 8 jets p IXC LXP - jets GCI Cover 00 6 mm diam long and short jets p IXLC / LXP - half rack jets p 6 IXLC LXP - 6 jets p 8 IXLC LXP - 8 jets p 6 IXLC LXP - 6 jets p 8 IXLC LXP - 8 jets 6 mm diam long jets p IXL LXP - jets p 6 IXL LXP - 6 jets p 8 IXL LXP - 8 jets p 6 IXL LXP - 6 jets 8 mm diam long jets p IXL LXP- jets p 9 IXL LXP - 9 jets 6 Lancer Glassware Washer Accessories
00 00 PSBT Basket LTC / Basket Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST LXP- Basic basket p PSBT LXP - Basic basket 00with spray arm 00 p GC LXP - Cover for PST/PSBT p GC / - Half cover Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) 00 EP/IXLC Rack RP Stand 00 Multipurpose Racks : p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PIP/ IXLC LXP - / pipette rack jets p EP/ IXLC LXP - vol flasks jets p PS/ IXLC LXP - PST jets Storage/Transport: Storage and transport of Lancer Accessories. p RP LXP - Stand to hold racks p TN LXP - Door plus upper level trolley STC Basket Pipette Racks: p pipettes p PIP LXP - grommet style p PPI B LXP - canister style PIP Rack Lancer Glassware Washer Accessories 7
Washing Accessories for model: 600 LXP 600 LXP 00 Injector Racks: mm diam short jets p small narrow neck glassware p IXA 6 - jets p IXA 6 - jets p GCI 6 - Cover for injector racks IXA Rack & 6 mm diam short jets p small narrow neck glassware IXLC Rack p IXA/ 6 - jets p IXA/ 6 - jets IXL Rack 6 mm diam short jets p 6 IXC 6-6 jets p 6 IXC 6-6 jets p 80 IXC 6-80 jets p IXC 6 - jets p IXC 6 - jets GCI Cover 00 6 mm diam long and short jets p 6 IXLC 6-6 jets p 6 IXLC 6-6 jets p 80 IXLC 6-80 jets p IXLC 6 - jets 6 mm diam long jets p 6 IXL 6 D6-6 jets p 6 IXL 6 - jets p 80 IXL 6-80 jets p IXL 6 - jets 8 mm diam long jets p 6 IXL 6-6 jets 8 Lancer Glassware Washer Accessories
GC Cover 00 Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST 6 - Basic basket p PSBT 6- Basic basket with spray arm p GC 6 - Cover for PST/PSBT BP Rack Other Applications: p thin plates p culture dishes p wtch glasses p BP 6 - Basket for culture dishes p SSC 6 SSL 6 - Supports p SSC / PS 6 SSL / PS 6 - Supports p VM / 6 - / basket for watch glasses LTC Basket Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) TN Trolley Storage/Transport: Storage and transport of Lancer Accessories. p RP 6 - Stand to hold p p racks TN 6 - Door plus three upper level trolley NB 6 - Door level trolley Pipette Racks: p pipettes p 0/0 PIP 6 - grommet style PIP Rack Lancer Glassware Washer Accessories 9
Rack Position Guide Available Basket Heights PST PSBT IXL IXC 9 0 8.9 80 6.7 70 7. 90 6.9 7 6.7 7.7 9 7. 8 80 LX/8 LX/80 LX Available Basket Heights PST PSBT IXL IXC 8. 0 7.9 0 6 6. 66 6 PST PSBT IXL IXC 0 0. 0 7.7 9 9 0 0.6 70 8. 60 90 LX Top Chamber View (Inches and mm shown) Top Chamber View (Inches and mm shown) 9.7 ( mm) 9.7 (9 mm).0 (0 mm) 9.7 (9 mm) 6 Available Basket Heights PST PSBT IXL IXC 6.6 70.7 0. 6 7 80.8 7.7 96.9 6 6 7 8 PST PSBT IXL IXC 9. 0 9. 60 0. 60..9 7 7 80. 70.8 60.9 6 LX Available Basket Heights PST PSBT IXL IXC 9.06 0 7.09 80.99 0 9.06 0 9.9 6 6. 7 8 8 7.09 80.96 80 9 0 PST PSBT IXL IXC.8 7.7 0 9. 70.7.9 9.8 0 7.7 0.7 7.6 700 6. 6 LXP Top Chamber View (Inches and mm shown) 7 0 Top Chamber View (Inches and mm shown) 7 0. (60mm) 9.7 (9 mm) 6 8 9 0. (770mm).9 (8 mm) 6 8 9 0 Lancer Glassware Washer Accessories
Available Basket Heights PST PSBT IXL IXC Available Basket Heights 600 LXP PST PSBT IXL IXC 8. 06 9.06 0 0. (770mm).9 7.99 76 7.09 80.99 0 Top 9. (9 mm) 9. (9 mm).98 9.06 0... 6 6.6 68 9.9 6 6. 7 8 8 7.09 80.96 80 9 0 6 7. 7 8 8 9.8 0.66 (8mm) PST PSBT IXL IXC.8 7.7 0 9. 70 0.66 7. 89 Top Chamber View.7.9 (Inches and mm shown).79 (6 mm) Chamber View (Inches and mm shown).. 8 6.88 9.06 8.8 80 9.8 0 7.7 0.7 7.6 700 6. 6 7.0 79. 08.0 9.80 0.6 89 800 LXA 6 7 6 7 8 8.6 9.70 8.98.7 0. 77 8 9 9 0 0 9. 6.6 68 Accessory Part Number Guide: All Models Injector Racks: IX L LXP D6 = number of injectors IX = rack type L = length of injectors p L = long injectors p C = short injectors p LC = mix long & short injectors p A = mm diam. injectors p C = short injectors p CM = mix of short 6 mm & mm diam. injectors p A/ = mix of short 6 mm & mm diam. injectors LXP = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP D6 = special diameter injectors p D6 = 6 mm (8 mm standard diam.) p D8 = 8 mm (6 mm standard diam.) Basic Basket: PST 6 PST = basket type p PST = basic basket for bottom level p PSBT = basic basket with spray arm for upper levels 6 = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP Mesh Baskets: STC / STC = basket height p STC = 9 mm p LTC = 6 mm / = basket length p None = mm p / = 09 mm Pipette Racks: 0 PIP 6 0 = number of pipette inserts PIP = pipette basket type 6 = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP Lancer Glassware Washer Accessories
Lancer USA Inc State Rd 9 Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com www.lancer.com JJD 8 008 LANCER Sales USA Inc. LANCER is a registered trademark. LANCER is constantly reviewing its products for improvements. Consequently, the actual products may slightly differ from the products pictured and described here. Printed in the USA.