By EurIng Brian Roberts, CIBSE Heritage Group Jean Claude Eugene Peclet,

Similar documents
MAURICE LEBLANC. By EurIng Brian Roberts, CIBSE Heritage Group. Maurice Leblanc,

By EurIng Brian Roberts, CIBSE Heritage Group Joseph Nason,

JAMES HARRISON REFRIGERATION PIONEER

JAMES HOWDEN & COMPANY THE FAN MAKERS

WARREN S JOHNSON and AUTOMATIC CONTROLS

THOMAS POTTERTON PIONEER OF GAS BOILERS

AMERICAN BLOWER COMPANY

THOMAS SUTCLIFFE MORT

GENERAL MONTGOMERY CUNNINGHAM MEIGS

ALFRED WOLFF AIR CONDITIONING PIONEER

JOHN GORRIE and his ICE MACHINE

AIM OF THE EXPERIMENT:- Study of boilers (fire tube, water tube) APPARATUS REQUIRED: - SL.NO NAME OF THE APPARATUS SPECIFICATION QUANTITY 01 Fire tube

A Simulation Study on the Energy Efficiency of Gas-Burned Boilers in Heating Systems

Development of Boiler Design

WILLIS HAVILAND CARRIER Father of the Air Conditioning Industry

INSTITUTE FOR ENVIRONMENTAL RESEARCH & SUSTAINABLE DEVELOPMENT NATIONAL OBSERVATORY OF ATHENS (NOA)

Laboratory exercise 3: Condensing water heater

Green Energy Engineering, Inc.

Experimental Research on Monomial Cooling Measure of Greenhouse in Summer

IJIRST International Journal for Innovative Research in Science & Technology Volume 1 Issue 12 May 2015 ISSN (online):

Who Was Claude Monet?

UNIVERSITY OF HONG KONG LIBRARY

Description of a Standard 125 ml Separatory Funnel

History of Horticulture: Lecture 30

Adsorption refrigeration system using waste heat

As part of the Stage I grant offer it was requested that research work be carried out into the ventilation system found in the church.

Improving the Performance and Reliability of Fired Heaters and Boilers

TASKS REGARDING COMBUSTION AIR

SUPPLEMENTARY DATA. Invitation, dated October 1886, for botanists to attend the first of five

Fin-Fan Control System

COMBUSTION AIR SYSTEM

Carbon monoxide (CO) is a colorless, odorless gas that is the product of incomplete combustion of carbon-based fuels.

Part J of the Building Regulations: Changes for 2010 Tuesday 28 th September 2010 Presenter: David Bleicher

Topic 2. ME 414/514 HVAC Systems Overview Topic 2. Equipment. Outline

Australia ICOMOS submission on the Greater Sydney Commission s (GSC) Vision and District Plans

Performance Analysis of Li-Br Water Refrigeration System with Double Coil Anti-Swirl Shell and Coil Heat Exchangers

SIZING HANDBOOK & APPLICATION GUIDE

The evil that men do lives after them; the good is oft interred with their bones.

Split Range Control for Mobile Room Heating System

Evaluation of Liquid Water Content in Thermal Efficient Heating Mechanism Using Water Vapor for Industrial Furnace

Insight. How Do Buildings Stack Up? By Joseph W. Lstiburek, Ph.D., P.Eng., Fellow ASHRAE

Temperature Control of Heat Exchanger Using Fuzzy Logic Controller

REQUEST FOR COMMENTS Issued January 5, 2018

Importance of a Draught Regulator

Ventilation techniques in the 19 th century: learning from the past

Constructing Nature. Garrett O. Hansen University of Kentucky

Coin operated shoe polishing machine

C.L.S.C. AND CENTRE D HÉBERGEMENT DE MANICOUAGAN VENTILATION OF CRAB COOKING BOILERS IN AN INDUSTRIAL SETTING. File: CONSULTANT S REPORT

JOHN GRUNDY

Typical damages to Boilers & Economizers

Hot Issues in Fire Engineering 12 March 2013

What s the difference?

NUMERICAL STUDIES ON BARE CABIN FIRES WITH OPERATION OF SMOKE EXTRACTION SYSTEM

SULPHUR RECOVERY UNIT

HEALTH AND CONFORT IN XIX CENTURY: THE CASE OF HEATING AND VENTILATION IN BARCELONA

JEFFERSON COLLEGE COURSE SYLLABUS HRA290 NORTH AMERICAN TECHNICIAN EXCELLENCE CERTIFICATION. 1 Credit Hour. Prepared by William Kaune

EFFECT OF WATER RADIATOR ON AIR HEATING SOLAR COLLECTOR EFFICIENCY

Performance Analysis of Electronic Expansion Valve in 1 TR Window Air Conditioner using Various Refrigerants

COMMISSION REGULATION (EU) No /.. of

Experimental Study and Analysis of Flat Plate Solar Water Heater with Different Flow Rates using of Circulating Pump

What s the difference?

EXPERIMENTAL INVESTIGATION ON RECOVERY OF WASTE HEAT FROM WINDOW AIR CONDITIONER

Experimental Investigation of an Indirect Evaporative Cooler Consisting of a Heat Pipe Embedded in Porous Ceramic

A. Section Common Motor Requirements for HVAC Equipment: Fan motors.

American International Journal of Research in Science, Technology, Engineering & Mathematics

Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather 1

2018 National Fuel Gas Code Summary List of Revisions Updated: 7/27/17

AS AS Australian Standard. Industrial fuel-fired appliances. This is a free 9 page sample. Access the full version online.

Appendix A. Glossary of Common Terms

Innovators in Waste to Energy Products

Condensing Boiler. One Master HVACR technician s journey through the world of condensing boilers.

THE USE of DIRECT SOLAR ENERGY in ABSORPTION REFREGERATION EMPLOYING NH 3 H 2 O SYSTEM

Removing the moisture contents of coal using solar drying

Document Code: 1 (15) Issuing date: Status:

Technical Guidance CE Marking of Metal Chimneys and Flues

CEN/TC 62 INDEPENDENT GAS FIRE SPACE HEATERS

STUDY ON HYBRID SYSTEM OF SOLAR POWERED WATER HEATER AND ADSORPTION ICE MAKER

FACT SHEET 2018 National Fuel Gas Code Summary List of Revisions rev

Effect of Contamination on the Sensitivity of Optical Scatter Smoke Sensors

Innovators in Waste to Energy Products

SUBSIDIARY LEGISLATION STEAM AND HOT WATER BOILERS REGULATIONS

Attic Condensation. Presented by: Joan Maisonneuve Technical Services

Fuel Oil Heating Installation Inspection Report #1 2008

EXPERIMENTAL STUDY OF CENTRIFUGAL HUMIDIFIER FITTED IN AN INDUSTRIAL SHED LOCATED IN TROPICAL CLIMATES

12/21/2015 National Fire Protection Association Report

Falling-film evaporators.

SIZING HANDBOOK & APPLICATION GUIDE

Energy Efficiency Requirements for Air Conditioners, Chillers and Close Control Units

Sandeep V. Lutade 1, Krunal Mudafale 2, Ranjan Kishore Mallick 3 1, 2

Open Access Operation Modes and Energy Analysis of a New Ice-Storage Air- Conditioning System

INNOVATIVE SOLAR TUNNEL DRYER

Northwest Service Center

Not-So-Dead Air Space

HEFAT th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics Sun City, South Africa Paper number:pp1

RS Chimney Fan for Solid Fuel Applications

Design and development of vapor absorption refrigeration system for rural dwellers. Adekeye, T. Oyedepo, S.O and Oyebanji, J.A

Weatherization Assistance Program (WAP) Space Heater Policy

Guide to the Emmet Mercury Boiler Records

FIFTH CLASS POWER ENGINEER S

Transcription:

JEAN CLAUDE EUGENE PECLET By EurIng Brian Roberts, CIBSE Heritage Group Jean Claude Eugene Peclet, 1793-1857

Peclet was born at Bescanon, France, on 10 February, 1793. He showed such a liking and aptitude for physics and mathematics that in 1813 he was allowed to enter the Upper Normal School in Paris. In 1816, he was appointed as Assistant Professor of Physics at the College of Marseille where he was struck with the lack of application of scientific principles to the manufacturing arts. Returning to Paris, he had the fortune to be helped in his studies by Ampere. Peclet taught in the Upper Normal School and while there he wrote his first books: on Chemistry & Physics in 1823, on Illumination in 1827 and on Heat in 1830. He was a Founder and Director in 1829 of the Central School of Arts & Manufacture, a private enterprise taken over by the State in 1857. It was in these capacities that he was able to apply his ideas of combining science and practice, and to carry out the experimental work on heat for which he is best known. Later, he became Inspector of the Academy of Paris and then a Supervisor of Schools. Peclet was primarily a physicist who engaged with the study of the application of heat in industry and, in particular, the theory of fuels & combustion, boilers & furnaces, distillation, evaporation, and drying. He had a special interest in heating and ventilating. However, he is now regarded as being weak on engineering construction and equipment, but in France, at this time, heating and ventilating was still in its infancy (stoves were in common use). Though he contributed to the development of the open fire, he suggested that cost considerations held back the development of more advanced heating systems. Peclet conducted studies in ventilation, fresh air requirements and removal of water vapour and odours, recommending a fresh air supply rate of 10 cubic metres per hour per person. He carried out his research in schools and at the Prison Mazas. He also looked into the problem of calculating building heat losses, commenting that he thought Tredgold s methods overestimated the loss. (Peclet s work on thermal transmittance is reviewed by Billington & Roberts, pp.490-491). His experience seems largely to have been in hot-air heating installations with little knowledge of steam systems. The reprinted 1861, 3 rd Edition of Traite de la Chaleur (Treatise on Heat), indicates that hot water heating had achieved notable popularity in France due to the efforts of Duvoir, Duvoir-Leblanc and Grouvelle. Peclet also gave details of their systems installed in many important buildings between 1840 and 1854. Peclet devoted much of his research to ventilation. He recognised the importance of humidity and knew about infiltration and air leakage but with the instruments then available was unable to quantity their values. Air movement relied mainly on chimney effect since fans were in their infancy and, with the exception of factories, buildings had no means of driving them and had to rely on man power. His scheme for France s Chamber of Deputies used two manually-driven fans, each requiring two men. He retired in 1852, keeping his connection with the Central School and had just finished revisions to his Treatise when he died in 1857.

Peclet s Textbook, 3 rd Edition, 1861 (a reprint after his death)

Illustration of a Combes forward/backward bladed fan, from Peclet s Traite de la Chaleur, 1844

Suggestion for Air Cooling Apparatus, 1861 1861

1861 France: Chamber of Deputies, 1841

Demolition of the Prison Mazas in 1898 Peclet

References Eugene Peclet as a Heating and Ventilating Engineer, P Nicholls, ASHVE Journal, Vol. 28, No. 7, October 1922 Building Services Engineering: A Review of Its Development, Neville S Billington & Brian M Roberts, Pergamon Press, 1982 Heat & Cold: Mastering the Great Indoors, Barry Donaldson & Bernard Nagengast, ASHRAE, 1994 The Comfort Makers, Brian Roberts, ASHRAE, 2004