CENin uudet julkaisut

CENin uudet julkaisut 1.1. 31.3.2018 01.040.03 Services. Company organization, management and quality. Administration. Transport. Sociology (Vocabularies) EN ISO 22300:2018 Security and resilience. Vocabulary (ISO 22300:2018) 01.040.23 Fluid systems and components for general use (Vocabularies) EN 736-1:2018 Valves. Terminology. Part 1: Definition of types of valves 01.040.25 Manufacturing engineering (Vocabularies) EN ISO 15296:2018 Gas welding equipment. Vocabulary (ISO 15296:2017) 01.040.27 Energy and heat transfer engineering (Vocabularies) EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 1: Terms and definitions 01.040.91 Construction materials and building (Vocabularies) EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 1: Terms and definitions 01.100.99 Other standards related to technical drawings EN ISO 6412-1:2018 Technical product documentation. Simplified representation of pipelines. Part 1: General rules and orthogonal representation (ISO 6412-1:2017) EN ISO 6412-2:2018 Technical product documentation. Simplified representation of pipelines. Part 2: Isometric projection (ISO 6412-2:2017) EN ISO 6412-3:2018 Technical product documentation. Simplified representation of pipelines. Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017) 03.100.01 Company organization and management in general EN ISO 22300:2018 Security and resilience. Vocabulary (ISO 22300:2018) 03.100.10 Purchasing. Procurement. Logistics CEN/TR 17014-101:2018 Electronic public procurement. Business interoperability interfaces (BII), e-tendering. Part 101: Overview CEN/TR 17015-101:2018 Electronic public procurement. Business interoperability interfaces (BII), e-catalogue. Part 101: Overview

03.100.70 Management systems CEN/TR 17223:2018 Guidance on the relationship between EN ISO 13485: 2016 (Medical devices. Quality management systems. Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation CEN/TR 17223:2018 Guidance on the relationship between EN ISO 13485: 2016 (Medical devices. Quality management systems. Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation EN ISO 13485:2016/AC:2018 Medical devices. Quality management systems. Requirements for regulatory purposes (ISO 13485:2016) EN ISO 13485:2016/AC:2018 Medical devices. Quality management systems. Requirements for regulatory purposes (ISO 13485:2016) 03.220.20 Road transport CEN ISO/TR 16401-1:2018 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-2. Part 1: Test suite structure and test purposes (ISO/TR 16401-1:2018) CEN ISO/TR 16401-2:2018 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-2. Part 2: Abstract test suite (ISO/TR 16401-2:2018) CEN ISO/TS 21719-1:2018 Electronic fee collection. Personalization of on-board equipment (OBE). Part 1: Framework (ISO/TS 21719-1:2018) CEN ISO/TS 21719-2:2018 Electronic fee collection. Personalization of on-board equipment (OBE). Part 2: Using dedicated short-range communication (ISO/TS 21719-2:2018) 07.100.10 Medical microbiology EN ISO 11737-1:2018 Sterilization of health care products. Microbiological methods. Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018) 07.100.20 Microbiology of water EN ISO 11133:2014/A1:2018 Microbiology of food, animal feed and water. Preparation, production, storage and performance testing of culture media. Amendment 1 (ISO 11133:2014/Amd 1:2018) 07.100.30 Food microbiology EN ISO 11133:2014/A1:2018 Microbiology of food, animal feed and water. Preparation, production, storage and performance testing of culture media. Amendment 1 (ISO 11133:2014/Amd 1:2018) 11.040.01 Medical equipment in general CEN/TR 17223:2018 Guidance on the relationship between EN ISO 13485: 2016 (Medical devices. Quality management systems. Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation

CEN/TR 17223:2018 Guidance on the relationship between EN ISO 13485: 2016 (Medical devices. Quality management systems. Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation EN ISO 13485:2016/AC:2018 Medical devices. Quality management systems. Requirements for regulatory purposes (ISO 13485:2016) EN ISO 13485:2016/AC:2018 Medical devices. Quality management systems. Requirements for regulatory purposes (ISO 13485:2016) 11.040.10 Anaesthetic, respiratory and reanimation equipment EN ISO 80601-2-55:2018 Medical electrical equipment. Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018) 11.040.20 Transfusion, infusion and injection equipment EN ISO 8536-14:2018 Infusion equipment for medical use. Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016) 11.040.25 Syringes, needles and catheters EN ISO 7886-1:2018 Sterile hypodermic syringes for single use. Part 1: Syringes for manual use (ISO/FDIS 7886-1:2016) 11.040.40 Implants for surgery, prosthetics and orthotics CWA 17253-1:2018 Joint implants. Part 1: Novel methods for isolating wear particles from joint replacements and related devices CWA 17253-2:2018 Joint implants. Part 2: Tiered toolkit approach to evaluate the biological impact of wear particles from joint replacements and related devices 11.040.70 Ophthalmic equipment EN ISO 8596:2018 Ophthalmic optics. Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017) 11.060.10 Dental materials EN ISO 13897:2018 Dentistry. Dental amalgam reusable mixing-capsules (ISO 13897:2018) EN ISO 19023:2018 Dentistry. Orthodontic anchor screws (ISO 19023:2018) 11.060.20 Dental equipment EN ISO 21533:2018 Dentistry. Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018) EN ISO 7492:2018 Dentistry. Dental explorer (ISO 7492:2018)

11.080.01 Sterilization and disinfection in general EN ISO 11737-1:2018 Sterilization of health care products. Microbiological methods. Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018) EN ISO 13408-2:2018 Aseptic processing of health care products. Part 2: Sterilizing filtration (ISO 13408-2:2018) 11.100.20 Biological evaluation of medical devices CWA 17253-2:2018 Joint implants. Part 2: Tiered toolkit approach to evaluate the biological impact of wear particles from joint replacements and related devices 13.020.10 Environmental management EN ISO 14044:2006/A1:2018 Environmental management. Life cycle assessment. Requirements and guidelines. Amendment 1 (ISO 14044:2006/Amd 1:2017) EN ISO 14044:2006/A1:2018 Environmental management. Life cycle assessment. Requirements and guidelines. Amendment 1 (ISO 14044:2006/Amd 1:2017) 13.020.30 Environmental impact assessment CEN/TS 15119-1:2018 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground). Laboratory method 13.020.50 Ecolabelling CEN ISO/TS 14027:2018 Environmental labels and declarations. Development of product category rules (ISO/TS 14027:2017) EN ISO 14024:2018 Environmental labels and declarations. Type I environmental labelling. Principles and procedures (ISO 14024:2018) 13.020.55 Biobased products EN 16785-2:2018 Bio-based products. Bio-based content. Part 2: Determination of the bio-based content using the material balance method 13.040.30 Workplace atmospheres CEN ISO/TS 21623:2018 Workplace exposure. Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA) (ISO/TS 21623:2017) 13.060.20 Drinking water EN 13077:2018 Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrestricted). Family A. Type B

13.060.30 Sewage water CEN/TR 17179:2018 Thermoplastics piping and ducting systems. Rainwater infiltration and storage attenuation systems. Practices for underground installation 13.060.50 Examination of water for chemical substances EN ISO 7393-2:2018 Water quality. Determination of free chlorine and total chlorine. Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017) 13.080.05 Examination of soils in general EN ISO 14688-1:2018 Geotechnical investigation and testing. Identification and classification of soil. Part 1: Identification and description (ISO 14688-1:2017) EN ISO 14688-2:2018 Geotechnical investigation and testing. Identification and classification of soil. Part 2: Principles for a classification (ISO 14688-2:2017) 13.080.20 Physical properties of soils EN ISO 17892-7:2018 Geotechnical investigation and testing. Laboratory testing of soil. Part 7: Unconfined compression test (ISO 17892-7:2017) EN ISO 17892-8:2018 Geotechnical investigation and testing. Laboratory testing of soil. Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018) 13.080.30 Biological properties of soils EN ISO 17601:2018 Soil quality. Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016) EN ISO 18187:2018 Soil quality. Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016) EN ISO 18311:2018 Soil quality. Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms. Bait-lamina test (ISO 18311:2016) 13.100 Occupational safety. Industrial hygiene EN ISO 15011-4:2018 Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 4: Fume data sheets (ISO 15011-4:2017) EN ISO 21904-3:2018 Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration. Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018) 13.110 Safety of machinery EN ISO 14118:2018 Safety of machinery. Prevention of unexpected start-up (ISO 14118:2017)

13.140 Noise with respect to human beings EN ISO 389-1:2018 Acoustics. Reference zero for the calibration of audiometric equipment. Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017) 13.220.10 Fire-fighting EN 1568-1:2018 Fire extinguishing media. Foam concentrates. Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids EN 1568-2:2018 Fire extinguishing media. Foam concentrates. Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids EN 1568-3:2018 Fire extinguishing media. Foam concentrates. Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids EN 1568-4:2018 Fire extinguishing media. Foam concentrates. Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids 13.220.20 Fire protection EN 81-58:2018 Safety rules for the construction and installation of lifts. Examination and tests. Part 58: Landing doors fire resistance test 13.220.40 Ignitability and burning behaviour of materials and products EN ISO 12138:2018 Textiles. Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:2017) 13.220.50 Fire-resistance of building materials and elements EN 1364-2:2018 Fire resistance tests for non-loadbearing elements. Part 2: Ceilings EN 1634-1:2014+A1:2018 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Part 1: Fire resistance test for door and shutter assemblies and openable windows 13.230 Explosion protection EN 14460:2018 Explosion resistant equipment 13.340.10 Protective clothing EN 13158:2018 Protective clothing. Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers. Requirements and test methods 17.040.40 Geometrical Product Specification (GPS) EN ISO 17450-4:2018

Geometrical product specifications (GPS). Basic concepts. Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) 17.140.20 Noise emitted by machines and equipment EN ISO 3822-3:2018 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018) 19.060 Mechanical testing EN ISO 4545-2:2018 Metallic materials. Knoop hardness test. Part 2: Verification and calibration of testing machines (ISO 4545-2:2017) EN ISO 4545-3:2018 Metallic materials. Knoop hardness test. Part 3: Calibration of reference blocks (ISO 4545-3:2017) 19.100 Non-destructive testing EN ISO 20485:2018 Non-destructive testing. Leak testing. Tracer gas method (ISO 20485:2017) EN ISO 20486:2018 Non-destructive testing. Leak testing. Calibration of reference leaks for gases (ISO 20486:2017) 21.060.01 Fasteners in general EN ISO 16228:2018 Fasteners. Types of inspection documents (ISO 16228:2017) 21.060.10 Bolts, screws, studs EN ISO 13918:2018 Welding. Studs and ceramic ferrules for arc stud welding (ISO 13918:2017) 23.020.30 Pressure vessels, gas cylinders EN 13445-1:2014/A2:2018 Unfired pressure vessels. Part 1: General EN 13445-3:2014/A4:2018 Unfired pressure vessels. Part 3: Design 23.020.35 Gas cylinders EN ISO 11363-1:2018 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Part 1: Specifications (ISO 11363-1:2018) 23.040.01 Pipeline components and pipelines in general EN 1329-1:2014+A1:2018 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the systems EN ISO 6412-1:2018

Technical product documentation. Simplified representation of pipelines. Part 1: General rules and orthogonal representation (ISO 6412-1:2017) EN ISO 6412-2:2018 Technical product documentation. Simplified representation of pipelines. Part 2: Isometric projection (ISO 6412-2:2017) EN ISO 6412-3:2018 Technical product documentation. Simplified representation of pipelines. Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017) 23.040.05 Pipelines and its parts for external sewage systems CEN/TR 17179:2018 Thermoplastics piping and ducting systems. Rainwater infiltration and storage attenuation systems. Practices for underground installation 23.040.10 Iron and steel pipes EN ISO 3183:2012/A1:2018 Petroleum and natural gas industries. Steel pipe for pipeline transportation systems. Amendment 1 (ISO 3183:2012/Amd 1:2017) 23.040.20 Plastics pipes CEN/TR 17179:2018 Thermoplastics piping and ducting systems. Rainwater infiltration and storage attenuation systems. Practices for underground installation EN ISO 11296-1:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 1: General (ISO 11296-1:2018) EN ISO 11296-2:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 2: Lining with continuous pipes (ISO 11296-2:2018) EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 2: Lining with continuous pipes (ISO 11297-2:2018) EN ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) EN ISO 11298-2:2018 Plastics piping systems for renovation of underground water supply networks. Part 2: Lining with continuous pipes (ISO 11298-2:2018) 23.040.45 Plastics fittings EN ISO 11296-1:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 1: General (ISO 11296-1:2018) EN ISO 11296-2:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 2: Lining with

continuous pipes (ISO 11296-2:2018) EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 2: Lining with continuous pipes (ISO 11297-2:2018) EN ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) EN ISO 11298-2:2018 Plastics piping systems for renovation of underground water supply networks. Part 2: Lining with continuous pipes (ISO 11298-2:2018) 23.040.70 Hoses and hose assemblies EN ISO 10619-1:2018 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) EN ISO 10619-2:2018 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017) EN ISO 10960:2018 Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) EN ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification (ISO 28017:2018) EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification (ISO 8028:2017) 23.060.01 Valves in general EN 16668:2016+A1:2018 Industrial valves. Requirements and testing for metallic valves as pressure accessories EN 736-1:2018 Valves. Terminology. Part 1: Definition of types of valves 23.100.20 Cylinders EN 13001-3-6:2018 Cranes. General design. Part 3-6: Limit states and proof of competence of machinery. Hydraulic cylinders 25.080.01 Machine tools in general EN ISO 16092-1:2018 Machine tools safety. Presses. Part 1: General safety requirements (ISO 16092-1:2017) 25.120.10 Forging equipment. Presses. Shears EN ISO 16092-3:2018 Machine tools safety. Presses. Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)

25.160.01 Welding, brazing and soldering in general EN ISO 21904-3:2018 Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration. Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018) 25.160.10 Welding processes EN ISO 13918:2018 Welding. Studs and ceramic ferrules for arc stud welding (ISO 13918:2017) EN ISO 15011-4:2018 Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 4: Fume data sheets (ISO 15011-4:2017) 25.160.20 Welding consumables EN ISO 17633:2018 Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification (ISO 17633:2017) EN ISO 26304:2018 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification (ISO 26304:2017) 25.160.30 Welding equipment EN ISO 14114:2018 Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements (ISO 14114:2017) EN ISO 15296:2018 Gas welding equipment. Vocabulary (ISO 15296:2017) 25.160.40 Welded joints and welds EN ISO 11666:2018 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels (ISO 11666:2018) EN ISO 15653:2018 Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018) EN ISO 9017:2018 Destructive tests on welds in metallic materials. Fracture test (ISO 9017:2017) 25.220.20 Surface treatment EN ISO 10215:2018 Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method (ISO 10215:2018) EN ISO 2931:2018 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017) EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on

aluminium (ISO 7599:2018) EN ISO 7668:2018 Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2018) 25.220.40 Metallic coatings EN ISO 2081:2018 Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) EN ISO 2819:2018 Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for testing adhesion (ISO 2819:2017) 25.220.50 Enamels EN ISO 28706-3:2018 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017) 25.220.99 Other treatments and coatings EN 15773:2018 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems]. Specifications, recommendations and guidelines 27.060.30 Boilers and heat exchangers EN 12953-4:2018 Shell boilers. Part 4: Workmanship and construction of pressure parts of the boiler 27.080 Heat pumps EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 1: Terms and definitions EN 14511-2:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 2: Test conditions EN 14511-3:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 3: Test methods EN 14511-4:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 4: Requirements 29.260.20 Electrical apparatus for explosive atmospheres EN 14460:2018 Explosion resistant equipment 35.080 Software

EN 9223-100:2018 Programme Management. Configuration Management. Part 100: A guide for the application of the principles of configuration management EN 9223-101:2018 Programme Management. Configuration Management. Part 101: Configuration identification EN 9223-102:2018 Programme Management. Configuration Management. Part 102: Configuration status accounting EN 9223-103:2018 Programme Management. Configuration Management. Part 103: Configuration Verifications, Reviews and Audits EN 9223-104:2018 Programme Management. Configuration Management. Part 104: Configuration Control EN 9223-105:2018 Programme Management. Configuration Management. Part 105: Glossary 35.240.20 IT applications in office work CEN/TR 17014-101:2018 Electronic public procurement. Business interoperability interfaces (BII), e-tendering. Part 101: Overview CEN/TR 17015-101:2018 Electronic public procurement. Business interoperability interfaces (BII), e-catalogue. Part 101: Overview 35.240.60 IT applications in transport and trade CEN ISO/TR 16401-1:2018 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-2. Part 1: Test suite structure and test purposes (ISO/TR 16401-1:2018) CEN ISO/TR 16401-2:2018 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-2. Part 2: Abstract test suite (ISO/TR 16401-2:2018) CEN ISO/TS 21719-1:2018 Electronic fee collection. Personalization of on-board equipment (OBE). Part 1: Framework (ISO/TS 21719-1:2018) CEN ISO/TS 21719-2:2018 Electronic fee collection. Personalization of on-board equipment (OBE). Part 2: Using dedicated short-range communication (ISO/TS 21719-2:2018) CEN/TS 17148:2018 Intelligent Transport Systems. esafety. ProForma ecall Agreement between TPSP and PARES CWA 16390:2018 Interface control document for provision of EGNOS/EDAS/multi-GNSS based services for tracking and tracing the transport of goods 35.240.63 IT applications in trade CEN/TR 17014-101:2018 Electronic public procurement. Business interoperability interfaces (BII), e-tendering. Part 101: Overview CEN/TR 17015-101:2018 Electronic public procurement. Business interoperability interfaces (BII), e-catalogue. Part 101: Overview

35.240.70 IT applications in science EN ISO 19115-1:2014/A1:2018 Geographic information. Metadata. Part 1: Fundamentals. Amendment 1 (ISO 19115-1:2014/Amd 1:2018) EN ISO 19157:2013/A1:2018 Geographic information. Data quality. Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018) 35.240.80 IT applications in health care technology EN ISO 11073-10424:2016/AC:2018 Health informatics. Personal health device communication. Part 10424: Device specialization. Sleep apnoea breathing therapy equipment (SABTE). Technical Corrigendum 1 (ISO/IEEE 11073-10424:2016/Cor 1:2018) EN ISO 11073-10427:2018 Health informatics. Personal health device communication. Part 10427: Device specialization. Power status monitor of personal health devices(iso/ieee 11073-10427:2018) 35.240.99 IT applications in other fields CWA 17239:2018 Big Data in Aquaculture 39.060 Jewellery EN ISO 8654:2018 Jewellery. Colours of gold alloys. Definition, range of colours and designation (ISO 8654:2018) 43.040.10 Electrical and electronic equipment EN 1648-1:2018 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Part 1: Caravans EN 1648-2:2018 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Part 2: Motor caravans 43.040.15 Car informatics. On board computer systems EN ISO 18541-6:2018 Road vehicles. Standardized access to automotive repair and maintenance information (RMI). Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018) 43.100 Passenger cars. Caravans and light trailers EN 1646-1:2018 Leisure accommodation vehicles. Motor caravans. Part 1: Habitation requirements relating to health and safety EN 1648-1:2018 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Part 1: Caravans EN 1648-2:2018 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Part 2: Motor caravans 43.180 Diagnostic, maintenance and test equipment EN ISO 18541-6:2018

Road vehicles. Standardized access to automotive repair and maintenance information (RMI). Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018) 45.060.01 Railway rolling stock in general EN 15654-1:2018 Railway applications. Measurement of vertical forces on wheels and wheelsets. Part 1: On-track measurement sites for vehicles in service 47.020.30 Piping systems EN 1305:2018 Inland navigation vessels. Connections for the discharge of oily mixture EN 1306:2018 Inland navigation vessels. Connections for the discharge of waste water 47.080 Small craft EN ISO 8099-1:2018 Small craft. Waste systems. Part 1: Waste water retention (ISO 8099-1:2018) 49.020 Aircraft and space vehicles in general EN 9223-100:2018 Programme Management. Configuration Management. Part 100: A guide for the application of the principles of configuration management EN 9223-101:2018 Programme Management. Configuration Management. Part 101: Configuration identification EN 9223-102:2018 Programme Management. Configuration Management. Part 102: Configuration status accounting EN 9223-103:2018 Programme Management. Configuration Management. Part 103: Configuration Verifications, Reviews and Audits EN 9223-104:2018 Programme Management. Configuration Management. Part 104: Configuration Control EN 9223-105:2018 Programme Management. Configuration Management. Part 105: Glossary 49.025.01 Materials for aerospace construction in general EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) 49.025.40 Rubber and plastics EN 2795:2018 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD 49.025.50 Adhesives EN 2667-2:2018 Aerospace series. Non-metallic materials. Foaming structural adhesives. Test methods. Part 2: Compressive tube shear

49.035 Components for aerospace construction EN 4691-2:2018 Aerospace series. Tie rod with integrated bolts. Part 2: Overview construction kit 49.060 Aerospace electric equipment and systems EN 3475-603:2018 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 603: Resistance to wet arc tracking EN 3475-604:2018 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 604: Resistance to dry arc propagation EN 3475-605:2018 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 605: Wet short circuit test EN 4533-004:2018 Aerospace series. Fibre optic systems. Handbook. Part 004: Repair, maintenance, cleaning and inspection EN 4652-221:2017/AC:2018 Aerospace series. Connectors, coaxial, radio frequency. Part 221: Type 2, TNC interface. Crimp version. Right angle plug. Product standard 53.020.20 Cranes EN 12999:2011+A2:2018 Cranes. Loader cranes EN 13001-3-1:2012+A2:2018 Cranes. General Design. Part 3-1: Limit States and proof competence of steel structure EN 13001-3-6:2018 Cranes. General design. Part 3-6: Limit states and proof of competence of machinery. Hydraulic cylinders 53.100 Earth-moving machinery EN 474-1:2006+A5:2018 Earth-moving machinery. Safety. Part 1: General requirements 55.040 Packaging materials and accessories EN 14932:2018 Plastics. Thermoplastic stretch films for wrapping silage bales 59.040 Textile auxiliary materials EN 1883:2018 Feather and down. Sampling in view of tests 59.080.01 Textiles in general EN ISO 15797:2018 Textiles. Industrial washing and finishing procedures for testing of workwear (ISO 15797:2017) EN ISO 3175-1:2018

Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017) EN ISO 3175-2:2018 Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene (ISO 3175-2:2017) EN ISO 3175-3:2018 Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2017) 59.080.30 Textile fabrics EN ISO 12138:2018 Textiles. Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:2017) 59.080.70 Geotextiles EN 13361:2018 Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams EN 13362:2018 Geosynthetic Barriers. Characteristics required for use in the construction of canals EN 13491:2018 Geosynthetic barriers. Characteristics required for use in the construction of tunnels and associated underground structures EN 13492:2018 Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment EN 13493:2018 Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites EN 15382:2018 Geosynthetic barriers. Characteristics required for use in transportation infrastructure EN 16993:2018 Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids EN 16994:2018 Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) 59.140.30 Leather and furs EN ISO 20701:2018 Leather. Tests for colour fastness. Colour fastness to saliva (ISO 20701:2017) 65.060.70 Horticultural equipment EN ISO 5395-3:2014/A2:2018 Garden equipment. Safety requirements for combustion-engine-powered lawnmowers. Part 3: Ride-on lawnmowers with seated operator. Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017) 65.080 Fertilizers EN 16962:2018

Fertilizers. Extraction of water soluble micro-nutrients in fertilizers and removal of organic compounds from fertilizer extracts EN 16963:2018 Fertilizers. Determination of boron, cobalt, copper, iron, manganese, molybdenum and zinc using ICP-AES EN 16964:2018 Fertilizers. Extraction of total micro-nutrients in fertilizers using aqua regia EN 16965:2018 Fertilizers. Determination of cobalt, copper, iron, manganese and zinc using flame atomic absorption spectrometry (FAAS) 65.120 Animal feeding stuffs EN 17049:2018 Animal feeding stuffs: Methods of sampling and analysis. Identification of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-additive levels in compound feed. Confirmatory analysis by LC-MS EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis. Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method) 67.060 Cereals, pulses and derived products EN ISO 11747:2012/A1:2018 Rice. Determination of rice kernel resistance to extrusion after cooking. Amendment 1 (ISO 11747:2012/Amd 1:2017) 67.240 Sensory analysis EN ISO 10399:2018 Sensory analysis. Methodology. Duo-trio test (ISO 10399:2017) 67.250 Materials and articles in contact with foodstuffs EN ISO 8442-9:2018 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Part 9: Requirements for ceramic knives (ISO 8442-9:2018) 71.040.40 Chemical analysis EN 16785-2:2018 Bio-based products. Bio-based content. Part 2: Determination of the bio-based content using the material balance method 71.080.60 Alcohols. Ethers CEN/TR 15993:2018 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination 71.100.50 Wood-protecting chemicals CEN/TS 15119-1:2018 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground). Laboratory method 71.100.70 Cosmetics. Toiletries

EN ISO 19448:2018 Dentistry. Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018) 71.100.80 Chemicals for purification of water EN 17034:2018 Chemicals used for treatment of water intended for human consumption. Aluminium chloride anhydrous, aluminium chloride basic, dialuminium chloride pentahydroxide and aluminium chloride hydroxide sulfate 75.020 Extraction and processing of petroleum and natural gas EN ISO 19008:2018 Standard cost coding system for oil and gas production and processing facilities (ISO 19008:2016) 75.100 Lubricants, industrial oils and related products EN ISO 20623:2018 Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of lubricants. Four-ball method (European conditions) (ISO 20623:2017) 75.140 Waxes, bituminous materials and other petroleum products EN 1431:2018 Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation 75.160.20 Liquid fuels CEN/TR 15993:2018 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination EN 17057:2018 Automotive fuels and fat and oil derivates. Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME). Method by GC-FID EN ISO 5165:2018 Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method (ISO 5165:2017) 77.040.10 Mechanical testing of metals EN ISO 26203-1:2018 Metallic materials. Tensile testing at high strain rates. Part 1: Elastic-bar-type systems (ISO 26203-1:2018) EN ISO 4545-1:2018 Metallic materials. Knoop hardness test. Part 1: Test method (ISO 4545-1:2017) EN ISO 4545-2:2018 Metallic materials. Knoop hardness test. Part 2: Verification and calibration of testing machines (ISO 4545-2:2017) EN ISO 4545-3:2018 Metallic materials. Knoop hardness test. Part 3: Calibration of reference blocks (ISO 4545-3:2017) EN ISO 4545-4:2018 Metallic materials. Knoop hardness test. Part 4: Table of hardness values (ISO 4545-4:2017) EN ISO 6507-1:2018

Metallic materials. Vickers hardness test. Part 1: Test method (ISO 6507-1:2018) EN ISO 6507-2:2018 Metallic materials. Vickers hardness test. Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) EN ISO 6507-3:2018 Metallic materials. Vickers hardness test. Part 3: Calibration of reference blocks (ISO 6507-3:2018) EN ISO 6507-4:2018 Metallic materials. Vickers hardness test. Part 4: Tables of hardness values (ISO 6507-4:2018) EN ISO 7500-1:2018 Metallic materials. Calibration and verification of static uniaxial testing machines. Part 1: Tension/compression testing machines. Calibration and verification of the force-measuring system (ISO 7500-1:2018) 77.040.99 Other methods of testing of metals EN ISO 3887:2018 Steels. Determination of the depth of decarburization (ISO 3887:2017) 77.060 Corrosion of metals EN ISO 11130:2018 Corrosion of metals and alloys. Alternate immersion test in salt solution (ISO 11130:2017) 77.080.10 Irons EN ISO 945-1:2018 Microstructure of cast irons. Part 1: Graphite classification by visual analysis (ISO 945-1:2017) 79.040 Wood, sawlogs and sawn timber EN 1309-3:2018 Round and sawn timber. Methods of measurements. Part 3: Features and biological degradations 79.120.10 Woodworking machines EN ISO 19085-8:2018 Woodworking machines. Safety. Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) 83.080.20 Thermoplastic materials EN 477:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to impact of profiles by falling mass EN 478:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the appearance after exposure at 150 C EN 479:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of heat reversion EN ISO 20029-1:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Part 1: Designation system and basis for specification (ISO 20029-1:2017) EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Part 2: Preparation of

test specimen and determination of properties (ISO 20029-2:2017) 83.140.10 Films and sheets EN 13207:2018 Plastics. Thermoplastic silage films and tubes for use in agriculture EN 13655:2018 Plastics. Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture EN 14932:2018 Plastics. Thermoplastic stretch films for wrapping silage bales EN 17033:2018 Plastics. Biodegradable mulch films for use in agriculture and horticulture. Requirements and test methods EN 17098-1:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation. Part 1: Specifications for barrier films EN 17098-2:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation. Part 2: Method for film permeability determination using a static technique 83.140.99 Other rubber and plastics products EN 477:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to impact of profiles by falling mass EN 478:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the appearance after exposure at 150 C EN 479:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of heat reversion EN 514:2018 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the strength of welded corners and T-joints 83.180 Adhesives EN ISO 10364:2018 Structural adhesives. Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015) 83.200 Equipment for the rubber and plastics industries EN 12013:2018 Plastics and rubber machines. Internal mixers. Safety requirements 87.020 Paint coating processes EN ISO 12944-5:2018 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 5: Protective paint systems (ISO 12944-5:2018) EN ISO 12944-6:2018 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 6: Laboratory performance test methods (ISO 12944-6:2018) 87.040 Paints and varnishes

CEN ISO/TS 19397:2018 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015) EN ISO 12944-9:2018 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) EN ISO 6270-1:2018 Paints and varnishes. Determination of resistance to humidity. Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) EN ISO 6270-1:2018 Paints and varnishes. Determination of resistance to humidity. Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) EN ISO 6270-2:2018 Paints and varnishes. Determination of resistance to humidity. Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017) EN ISO 6270-2:2018 Paints and varnishes. Determination of resistance to humidity. Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017) 87.060.10 Pigments and extenders EN ISO 23900-1:2018 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Part 1: General introduction (ISO 23900-1:2015) EN ISO 23900-2:2018 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015) EN ISO 23900-3:2018 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015) 87.100 Paint coating equipment EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification (ISO 8028:2017) 91.060.30 Ceilings. Floors. Stairs EN 1364-2:2018 Fire resistance tests for non-loadbearing elements. Part 2: Ceilings 91.060.50 Doors and windows EN 1634-1:2014+A1:2018 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Part 1: Fire resistance test for door and shutter assemblies and openable windows 91.100.23 Ceramic tiles EN ISO 10545-3:2018 Ceramic tiles. Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO

10545-3:2018) 91.100.50 Binders. Sealing materials EN 12691:2018 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact EN 13361:2018 Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams EN 13362:2018 Geosynthetic Barriers. Characteristics required for use in the construction of canals EN 13491:2018 Geosynthetic barriers. Characteristics required for use in the construction of tunnels and associated underground structures EN 13492:2018 Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment EN 13493:2018 Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites EN 1431:2018 Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation EN 16993:2018 Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids EN 16994:2018 Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) 91.100.60 Thermal and sound insulating materials EN 13467:2018 Thermal insulating products for building equipment and industrial installations. Determination of dimensions, squareness and linearity of preformed pipe insulation 91.120.20 Acoustics in building. Sound insulation EN 16205:2013+A1:2018 Laboratory measurement of walking noise on floors 91.140.30 Ventilation and air-conditioning EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 1: Terms and definitions EN 14511-2:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 2: Test conditions EN 14511-3:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 3: Test methods

EN 14511-4:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors. Part 4: Requirements 91.140.40 Gas supply systems EN 12261:2018 Gas meters. Turbine gas meters EN 12480:2018 Gas meters. Rotary displacement gas meters 91.140.60 Water supply systems EN ISO 3822-3:2018 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018) 91.140.80 Drainage systems EN ISO 11296-1:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 1: General (ISO 11296-1:2018) EN ISO 11296-2:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 2: Lining with continuous pipes (ISO 11296-2:2018) EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 2: Lining with continuous pipes (ISO 11297-2:2018) EN ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) 91.140.90 Lifts. Escalators EN 81-21:2018 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 21: New passenger and goods passenger lifts in existing building EN 81-58:2018 Safety rules for the construction and installation of lifts. Examination and tests. Part 58: Landing doors fire resistance test 91.220 Construction equipment EN 16719:2018 Transport platforms 93.020 Earthworks. Excavations. Foundation construction. Underground works EN ISO 14688-1:2018 Geotechnical investigation and testing. Identification and classification of soil. Part 1: Identification and description (ISO

14688-1:2017) EN ISO 14688-2:2018 Geotechnical investigation and testing. Identification and classification of soil. Part 2: Principles for a classification (ISO 14688-2:2017) EN ISO 14689:2018 Geotechnical investigation and testing. Identification, description and classification of rock (ISO 14689:2017) EN ISO 17892-7:2018 Geotechnical investigation and testing. Laboratory testing of soil. Part 7: Unconfined compression test (ISO 17892-7:2017) EN ISO 17892-8:2018 Geotechnical investigation and testing. Laboratory testing of soil. Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018) 93.025 External water convevance systems EN 16941-1:2018 On-site non-potable water systems. Part 1: Systems for the use of rainwater EN ISO 11298-2:2018 Plastics piping systems for renovation of underground water supply networks. Part 2: Lining with continuous pipes (ISO 11298-2:2018) 93.030 External sewage systems EN 1852-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1: Specifications for pipes, fittings and the system EN ISO 11296-1:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 1: General (ISO 11296-1:2018) EN ISO 11296-2:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 2: Lining with continuous pipes (ISO 11296-2:2018) EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) EN ISO 11297-2:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 2: Lining with continuous pipes (ISO 11297-2:2018) EN ISO 11297-4:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) 93.080.20 Road construction materials EN 12274-1:2018 Slurry surfacing. Test methods. Part 1: Sampling of slurry surfacing mixture EN 12274-2:2018 Slurry surfacing. Test methods. Part 2: Determination of residual binder content including preparation of samples EN 12274-3:2018